Traffic Other than ICMP does not Get Policy NATed

Hi Folks,
I have applied policy based NAT on one ASA firewall. Assume that Source Inside Network is 192.168.1.0 and destination (Outside) network is 192.168.2.0. Now using Policy NAT i am translating source Subnet 192.168.1.0 to a global address 192.168.2.10.
access-list 1 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
nat (inside) 15 access-list 1
global (outside) 15 192.168.2.10 netmask 255.255.255.255
Now what i observe is when i do ping to a Destination IP 192.168.2.20, the source IPs (192.168.1.0/24) get translated to 192.168.2.10.
However when i try to take RDP of the same system, the source IPs do not get translated.
And i am completely perturbed as to why this inconsistency.
Kindly Help.

Hi,
It might be that you would need 7.2 software if I remember correctly.
I would probably first check ASDM logs while testing the connection and see what translation and connection forming messages I see.
I would naturally see the whole NAT configuration of the device which I could go through to see if there is anything wrong there. If there is possibly some other NAT configuration causing problems.
I would suggest considering an update for the firewall software. If you dont want major changes to the configuration format then software 8.2(5) would probably be the newest version for you.
- Jouni

Similar Messages

When I add an event to my ipad it does not get synced with any other calendars on my other devices.

My calendar on my ipad will sync with any information added on my android phone or on my PC but if I add information directly on my ipad it does not get added to my PC or phone.

Do you have iCloud?
As it states hereyou need it tp sync.
Allan

Hostname verifier does not get invoked

Hi All,
I am new to weblogic and currently facing an issue with SSL. I checked this forum but none of the solutions really worked for me, so seeking advice starting a new thread. Kindly help.
Problem 1
I have a REST webservice running in one weblogic server and another weblogic server contains a client which is based on the code from the following link -
http://wiki.open-esb.java.net/attach/RestBCEchoSSL/SslClient.java
One way handshaking is enabled in both the weblogic and the KeyStore and Truststore are read from configurable directory in the client java code. I specify a directory which resides outside weblogic home.
Even though there is an HostnameVerifier implemented in the code to return true always, it does not get invoked and I get a certificate exception as below -
<Warning> <Security> <BEA-090542> <Certificate chain received from xx.yy.zz.rrr - xx.yy.zz.rrr was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configuration to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS server behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore=DemoTrust on the command line for this client.>
But when I run the java client from Eclipse I am able to invoke the webservice methods using HTTPs.
So is not it possible to add a default hostname verifier as in the java code when the application is deployed in weblogic?
Problem 2
I another attempt to solve the above issue I turned off the hostname verification from weblogic admin console in the client weblogic side. In the console for the server Configuration > SSL->Hostname Verification field is set to "None". But that did not help.
Then I added the '-Dweblogic.security.SSL.ignoreHostnameVerification=true' flag into the <domain>/bin/startWebLogic.sh file and restarted the weblogic. No luck again.
${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy -Dweblogic.security.SSL.ignoreHostnameVerification=true ${PROXY_SETTINGS} ${SERVER_CLASS}
I tried recreating the certificate using the' hostname' instead of the ip address ( also added an entry into the /etc/hosts file putting the ip and hostname so that I can do ping <hostname> from the client and get response returned from the server side). Again no luck :(. I keep getting the same handshake failure as mentioned above.
The weblogic version is 10.x.
Thanks,
Amrit

I did some more research for the issue mentioned which I yet to get rid of.
1) I wrote a REST web service which makes a call to another REST service deployed on another weblogic using HTTPs (same code as mentioned above is used). I delpoyed the war and made a http call to the first webservice, the other REST service was invoked successfully using HTTPs. So this confirmed that there is no problem with the certificates or keystore or hostname verifictaion.
2) My actual application still throws the handshake exception as below -
<Warning> <Security> <BEA-090542> <Certificate chain received from xx.yy.zz.rrr - xx.yy.zz.rrr was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configuration to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS server behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore=DemoTrust on the command line for this client.>
So I think the problem is something else but weblogic is priniting the exception message wrong.
The process hierarchy ( in UNIX ) is as shown below -
bea 31914 31913 0 14:29 ? 00:00:00 /bin/sh <DOMAIN HOME>//bin/startWebLogic.sh
bea 31989 31914 0 14:29 ? 00:01:25 /opt/bea/jdk160_24/bin/java <The weblogic start server process> started by startWebLogic.sh
bea 32107 31989 0 14:29 ? 00:00:09 /opt/bea/jdk160_24/bin/java <One of custom process>
bea 2038 32107 0 18:38 ? 00:00:15 /opt/bea/jdk160_24/bin/java <Another custom process which contains my java classes containing the REST client>
The problem is there in both Weblogic 11 and 10.3 version.
I will be grateful if someone gives any clue about the problem.

OKI 5500n driver does not get installed......

I tried it on Macbook Pro intel and MacPro xenon.
in os 10.5.3 the printer just stopped working!!!
When I install the new driver from oki.com It appears that is is getting installed properly but I can not find the driver. I created a separate folder but still does not get installed!!!!
Please help!!!

I just got this working, after calling Okidata at 1-800-oki-data as someone suggested. I had tried installing all the drivers from the oki web site which apparently was not the best thing to do.
The final procedure that worked was:
1) Move Library/Printers/Okidata folder to trash and empty trash
2) Move all other folders in that Library/Printers directory, EXCEPT for PPDs) to a temporary directory on the desktop
3) Reboot
4) Install OSX5C5500E driver
5) Open System Preferences/Print&Fax
6) Click + to add a a printer
7) IGNORE THE OKI PRINTER THAT APPEARS THERE
8) Select "More Printers"
9) Under Oki USB, a printer driver will show up - choose that one.
10) Print - it works now!
11) Move other printer drivers back into Library/Printers
12) Enjoy using Okidata printer rather than buying lots of HP ink.

[svn] 3130: Fix SDK-16700: Applying a matrix to a GraphicElement does not get applied immediately.

Revision: 3130
Author: [email protected]
Date: 2008-09-05 15:32:13 -0700 (Fri, 05 Sep 2008)
Log Message:
Fix SDK-16700: Applying a matrix to a GraphicElement does not get applied immediately.
Added explicit matrixChanged and displayObjectChanged flags to GraphicElement so we can reliably track changes to those items. Changed commitXY() to set the x and y properties directly on the display object rather than indirectly through the matrix. Setting through the matrix caused any non-rotation or scale transform to be lost.
Reviewer: Deepa
Checkintests: pass
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16700
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .as

:/ - I just said I can't post this on the business forum as I have tried, it it says my post doesn't conform to the rules, yet there isn't anywhere where it breaks them. I will already be in talks with a lawyer but I was wondering if a more amicable solution could be reached first

When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt cmd esc. Ideas?

When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt+cmd+esc. Ideas?

I have never seen it but then I run SL which is much more reliable than Lion..
See
http://pondini.org/TM/E4.html
Check the master guru of all TM problems.

When i open an mp3 file from a source other than apple, does itunes create it's own file and can I then delete the original mp3?

when I open a music file from a source other than apple, does itunes create it's own file and can I then delete the original mp3?

If you use iTunes' default settings then when you add a file to iTunes it places a copy of the file in the iTunes media folder and it leaves the original in place. The exception is when you drag it to the Automatically Add To iTunes folder.
It does not convert the file. You can delete the original if you wish.

Print preview of the PO -languages other than English is not appearing.

Hi Experts
In the Print preview of the Purchase Order -languages other than English is not appearing.
When I create a PO for a chinese vendor , in the print i can see only the ##### characters.
Pl let me know how to solve this issue.
Note :
Vendor language is maintained as Chinese in vendor master & same is getting copied in the PO heaader communication tab.
With outtype LP01 it works for the print preview , however when sent as a PDF it wil be with #### charaters.
But when i select LOCL it gives #### charaters for both print & PDF.
Thanks
Dkmurthy

are the replacements if the character cannot be printed on the chosen device.
There are several OSS notes adressing this issue. Contact your basis team.

G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11

Hi,
G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11
I am creating an independent AP Invoice, there are two issues:
1. On line level G/L Account field is not open for selection
2. I have then selected and updated the account on Form Settings. Same account gets updated on line level.
In Journal Entry selected G/L account on line level shall be hitted. But it does not put any effect on JE. Accounting is set by Warehouse. It picks up accounts from warehouse only.
Need help its urgent.
Thanks in advance.

Invoice is Item Type.
G/L Accounts are set by Warehouse. But if explicitly we are want to change the account on line level in that case, it is not getting reflected in Journal entry. On AR Invoice same scenario works perfectly. On line level I can change the accounts explicitly and have the effect on Journal entries.
Issue seems to be on AP side only.
As required please find attached the screen shots.
JEwith mapped GL Account on Warehouse
JEwith different GL Account on line Level via Form Settings
Thanks & Regards
Sonil

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases?

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases? If so, how do I set this up?

Yes. Just redeem gift cards so that your own account always has a sufficient credit balance. Here is how it works:
Family purchases and payments
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card.

Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes.

Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes, have tried restore mode & DFU mode. Bad battery or port?

iPhone not appearing in iTunes

I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

# Question
I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Audigy 4 Pro - I/O Hub does not get any po

Hello all,
I purchased an Audigy 4 Pro a few days ago and I cannot get the external hub to power on.
This somewhat sumarizes what I tried so far:
. Uninstalled all drivers and software of my old Soundblaster Li've 5. Platinum
2. Also removed all entries of the old soundcard from Device Manager
3. Powered down the PC fully, took out the Li've 5. and powered it back on and logged on to my Windows XP (SP2).
4. Just to be sure before installing the drivers for the Audigy 4 Pro I cleaned out the cookies, temporary internet files, all other Temp folders, the Prefetch folder and also ran a program to clean the registry.
5. De-activated my Norton AntiVirus Corporate Edition's Real-time protection, it's services and also my ZoneAlarm Pro from starting up the next time I reboot Windows.
6. Powered down the PC again, took the power cable out, made sure there was no power whatsoever left and carefull inserted the Audigy 4 Pro card in an empty PCI slot.
7. Connected the larger AD_Link to the card, then to the hub
8. Connected the smaller AD_Link to the card, then to the hub
9. Finally connected the power convertor cable to a free systems power unit
0. Double-checked the entire hardware setup a few times and power the PC back on
. Windows XP detected and installed the OHCI Compliant IEEE 394 Host Controller and the 394 Net Adapter
2. Canceled to proceed looking for a driver when it found the Audigy 4 Pro card
3. Installed the drivers and applications that came with the Audigy 4 Pro. Everything went smooth - no error messages during the installation.
4. Rebooted PC after prompting to do so.
5. With ZoneAlarm and my Norton Antivirus de-activated, all drivers and programs installed properly the external I/O hub does NOT get any power. I also made sure to check this with the remote control.
I have ofcourse no sound coming out that hub when plugging in my headphone and also cannot use my microphone.
6. I ran the Diagnostics program that was installed automatically with the other Creative applications: It claims there aren't any problems.
7. Powered down the PC again, checked all connectors, powered the PC up again: Same problem... no power.
8. Installed the latest 4-in- drivers found on viaarena.com: Same problem
9. Uninstalled and reinstalled the drivers and applications: Same problem
20. Uninstalled and reinstalled the drivers and applications after taking out all other PCI cards and placing the Audigy 4 Pro card into an other PCI slot: Same problem
2. Set my BIOS to factory defaults: Same problem
22. Formatted the PC and reinstalled Windows XP (SP) with every update thinkable... Same problem
23. Formatted the PC AGAIN ( ! ) and reinstalled Windows (SP2) with updates .... Same problem
Another problem: Sent a detailed e-mail to Creative Support Europe.... Still NO respons after 48+ hours.
Anyone else should have a solution I would appreciate trying out, or if all fails I'll go for a Terratec model.
Thanks in advance!
PC Stats: Asus A7V266 - VIA KT266 Chipset (VT8366 North Bridge with VT8233 South Bridge) / BIOS version: 0 / AMD Athlon .4GHz / 52Mb
Message Edited by HilTek on 07-05-2005 :04 PM

Amazing, I got mine about 3 days ago and have been pulling my hair out trying to resolve the same problem. I have checked power connections, reinstalled drivers. I think something is wrong with the box. I tried to call support yesterday, which was a Saturday, but they aren't available til Monday. I guess I will call them Monday. Let me know if you find anything out in the mean time.
Thanks
John
AMD Athlon(tm) 64 FX-57 Processor
A8N-SLI Premium
NVIDIA GeForce 7800 GTX
GB RAM
WIN Pro x64

Solution Manager does not get service definitions from SAP in self diagnosi

Hi,
In our production solution manager transaction solution_manager, self diagnosis we are getting a warning message on our development solution manager.
Solution Manager XXX does not get service definitions from SAP.
The production Solution Manager is the master in SDCCN for the test Solution Manager. In the test Solution Manager, the scheduled task REFRESH SERVICE DEFINITIONS has task System ID of O01. It is pointed to RFC destination SDCC_OSS, not the production Solution Manager system.
It gives the same warning if I point the task to the production Solution Manager system.
Has anyone seen this before? Any ideas?
Best regards,
Russ

Hi,
i guess have you activated SDCCN from your solution manager system too?
if not please activate. since that setup helps solman retrive the service definitions used in SDCCN from SAP (SAPOSS).so this ultimately allows you to set solution manager system as Master, so all the satellite system get the service definition from solman and do not need a direct SAPOSS connection.
and Please check this Note 1143775 - SAP service content update
the wiki for trouble shoot ["EarlyWatch Alert is Red Flagged - how to resolve" |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728]
please check.
Thanks,
Jansi

When I send a text message to my husbands iPhone he does not get it

When I send a text to my husbands iPhone he does not get it. It worked before the new update.

Either one of you needs to uncheck the other's phone number under settings<messages<send & receive or one of you needs to sign out of the apple ID in iMessage settings altogether by pressing the apple id on the page and choosing 'sign out'

Traffic Other than ICMP does not Get Policy NATed

Similar Messages

Maybe you are looking for