Traffic Redirection tab not visible in PRSM single device mode

I am using a 5515-X in single device mode. Software is version 9.2.1.2-69.
I noticed a couple things that I am not sure are a problem or not. When I go to the configuration overview tab PRSM shows mode of the ASA CX as "unknown". Also the User Guide says I should see a "traffic redirection" tab under configuration policies/settings but I don't see that.
I guess I can configure traffic redirection with ASDM but just wondering if this is normal, or cosmetic bug or something else?
Thanks,
Diego

If you're running single device mode (on-box PRSM) you cannot manage the ASA configuration like you can with the off-box PRSM. Note this section of the user guide which states:
"Traffic Redirection—(ASA, Multiple Device mode only.) Configure traffic redirection from the ASA to its CX module."

Similar Messages

Function and attribute tabs not visible in ppoma_crm

Hello Experts,
Function and Attribute tab at the sales organization level is not visible in PPOMA_CRM transaction code for one of the user.
Is it due to some authorization issue ? or anything else ?
Before taking a system trace for that specific user, I would like to know if we are missing anything functionally
Kindly revert
Thanks and Regards
DJ

Hi DJ,
Please see note 926540 - Missing Organisational units
But from your description this does not seems to be the exact symptom.
Yes I would advise to run a SU53 authorization check.
Best regards - Christophe

Configuration tab not visible in the costom view created.

HI All,
My requirement is:
To create a view in the standard component : BT301i_lam (Financial service item level).
For this i followed following steps:
1> Added item component through EEWB.
2> Enhanced the component BT301I_LAM to add a custom view which will show the required details created through EEWB.
3> Now problem is , after view creation , the "CONFIGURATION" tab is not visible in the view.
    Also , in the runtime repository (where i can add my view to the overview page) i am not able to find the view.
Can anyone please tell me on where i went wrong.Please also provide the correct steps to add a custom view so as to show attributes added through EEWB.
Thanx.
Edited by: abhishek ranjan on Mar 25, 2011 10:48 AM

Hi,
Try with the below code in .HTM .
<%@page language="abap" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<chtmlb:configTable actionsMaxInRow       = "3"
                    displayMode           = "FALSE"
                    allRowsEditable       = "TRUE"
                    downloadToExcel       = "FALSE"
                    enableTableGraphics   = "TRUE"
                    id                    = "table"-------you can give your table id
                    onRowSelection        = "select"
                    personalizable        = "FALSE"
                    selectedRowIndex      = "<%= X->SELECTED_INDEX %>"
                    selectedRowIndexTable = "<%= X->SELECTION_TAB %>"
                    selectionMode         = "<%= X->SELECTION_MODE %>"
                    table                 = "//X/Table"
                    usage                 = "ASSIGNMENTBLOCK"
                    visibleFirstRow       = "<%= X->VISIBLE_FIRST_ROW_INDEX %>"
                    visibleRowCount       = "25"
                    width                 = "100%"
                    xml                   = "<%= controller->configuration_descr->get_config_data( ) %>" />
REPLACE X WITH YOUR CONTEXT NODE.
Regards,
Gangadhar.S
Edited by: gangadhar rao on Mar 25, 2011 1:47 PM

Email tabs not visible

Hi.
I've just migrated to BT mail so still finding my way around. One thing is bugging me (yes, only one at the moment!). When I open an email, read it and then want to simply move onto the next message, I can't find a way to do it! There's no "Next Message" or Previous message buttons. The Help suggests there should be an Inbox tab, which there is, and that each message should display in its own tab as it's opened, so I could switch between the tabs (as it was with BT Yahoo), but these tabs are not visible for me. There is an Inbox tab and then as I open a message no new tab displays (the Inbox tab just updates with the message). I have to click the Inbox in the left pane or the little icon next to the Inbox tab so I then lose the message. I can't find any setting, etc. Does anyone have any suggestions? I use Google Chrome so am wondering if that's got something to do with it.
Thanks in advance!

If you set it up as an IMAP account, not a POP3 account, it will replicate all your folders and emails that you have on webmail. You do not need to import them it will do it automatically.
See link for setting it up.
http://windows.microsoft.com/en-gb/windows-vista/windows-mail-setting-up-an-account-from-start-to-fi...
and this link for the settings you need.
http://bt.custhelp.com/app/answers/detail/a_id/44917/kw/bt%20mail/c/346,6588,6591
When setting it up select the manual set up rather than the wizard. Make sure you put the correct settings in the right place and you will have no problems. It will take you less than 15 minites to set up.
Hopefully once you have done that you will wonder why you ever used webmail.

Tab Not Visible in Internet Explorer 10

Hi,
We have developed application using oracle apex 4 and oracle 11g xe as database. Application runs perfect in Internet Explorer 8 and 9, Recently we upgraded browser to IE10 problem we are facing is there are more than 10 tabs in the application all the tabs are not visible in the application. Please suggest me how to fix this issue.
Thanks
Sudhir

Sudhir,
The fix you want is for the 10 tabs to work again in IE. Oh, boy! I hope someone can help with that.
But stepping back for a moment, 10 is a lot of tabs. Is 10 tabs all there will ever be? What if you need an 11th tab? I'm pointing out that it might be time to consider changing the way navigation is done. Now no one likes to comtemplate all the work and user disrutpion of changing the navigation method. But there's only so much room for displaying tabs.
But please see {thread:id=2519792} for some ideas.
Good luck,
Howard

Configuration tab not visible in CRM ORDER

Hi,
When I use the CRM_ORDER_MAINTAIN function module to create the CRM ORDER, the configuration tab is not visible and when I use the same data to create the CRM ORDER manually through CRMD_ORDER, i can see the configuration tab. What could be the problem?
Infact I am using CRMXIF_ORDER_SAVE FM to create the order.
Regards,
Roopesh

Hi,
Try with the below code in .HTM .
<%@page language="abap" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<chtmlb:configTable actionsMaxInRow       = "3"
                    displayMode           = "FALSE"
                    allRowsEditable       = "TRUE"
                    downloadToExcel       = "FALSE"
                    enableTableGraphics   = "TRUE"
                    id                    = "table"-------you can give your table id
                    onRowSelection        = "select"
                    personalizable        = "FALSE"
                    selectedRowIndex      = "<%= X->SELECTED_INDEX %>"
                    selectedRowIndexTable = "<%= X->SELECTION_TAB %>"
                    selectionMode         = "<%= X->SELECTION_MODE %>"
                    table                 = "//X/Table"
                    usage                 = "ASSIGNMENTBLOCK"
                    visibleFirstRow       = "<%= X->VISIBLE_FIRST_ROW_INDEX %>"
                    visibleRowCount       = "25"
                    width                 = "100%"
                    xml                   = "<%= controller->configuration_descr->get_config_data( ) %>" />
REPLACE X WITH YOUR CONTEXT NODE.
Regards,
Gangadhar.S
Edited by: gangadhar rao on Mar 25, 2011 1:47 PM

"Files" and other tabs not visible for document library after script editor webpart is added

I created a document library and uploaded a few documents to ti. On the ribbon, I could see both "Files" and "Library" tabs. I then added a Script Editor webpart to this page because I needed to run some javascript on this
page. Now, when I go to that document library page (AllItems.aspx) then I don't see the Files and Library tab. My guess is that this is because these tabs are context sensitive so they only appear when Sharepoint knows you're working with a document
library and since now I have both the webpart that shows the document library and the Script editor webpart, that context is not there. If I click somewhere on the page close to the actual list of documents, then the Files and Library tabs reappear since
now Sharepoint knows that I'm working with a document library. Is there any way aroudn this? We don't want to have to ask our customer to click somewhere on the screen in order to get access to these tabs. I'm not sure why Sharepoint would
be confused by the Script editor webpart. It is not visible so when the page is not in edit more, you can't even see that Script editor. So, my question is: is there any way to:
- either find some other way of using javascript on this page (maybe external javascript file with some link to it on the page?
- or, some way to force the Fiels and Library tabs to be visible no matter what (i.e. despite having the Script editor webpart on the page).
I also experienced this issue when I wanted to insert some customized text on the same page that had a document library. For example, I created a document library and then on the AllItems.aspx page I inserted a content editor webpart so that I can
show some text at the top. That also caused the Files and Library tabs to disappear.
thanks,

Hi,
I understand Files/Libraray tab disappear after you add web parts to a document library, once you click somewhere in library list, it will appear again.
This is by design. As workaround, please try to use SharePoint Desginer to edit Allitems page of document library instead of using script web part.
https://social.msdn.microsoft.com/Forums/office/en-US/fd1bb098-6425-437c-b3f8-25bf65bcaad3/ribbon-control-disappears-on-sharepoint2013-document-libraries-when-content-editor-web-part-has?forum=sharepointdevelopment
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

LifeTime tab not visible for WPC content

Hello,
For any WPC content if we go to Details -> Properties, there is tab called Lifetime where we can set from when to when this content is valid.
Some how it is not visible for any of my content in my new installation. I am using Portal 7.0 SP16.
Point will be awarded to resolve this issue.
Also I wanted to ask does this LifeTime means content should be unavailable after the Expiry period we set here, correct?
regards,
Jaish

I went to SAP Tech Ed in Las Vegas and came to know that there is bug in WPC for this so they removed this feature in SP16 of Portal 7.0. This is why I was not seeing this after the version update.

Competitors tab not visible in opportunities

Hi group!
I'm trying to find the way to show Competitors tab in opportunities, since it's not visible. I don't know what have we changed in customizing to have that tab hidden.
Any suggestions?
Thanks a lot
cheers
Jorgelina

It's solved already. Thanks anyway!

Pinned tabs not visible.

After I pin a tab In ff29 it disappears to the left of the tab row. I see an empty gray box there where the pinned tabs were visible in ff28.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Does it help to open a new window?

Visa server security tab not visible

I want to enable the visa server for remote visa connections to the serial port, when I go into MAX to setup the visa server security the tab is not visible. I have a 2nd system and I can see the tab. Is some setting needed to enable the security?

Hello Chris,
I would expect that this is because of a version difference in your two machines. What OS are they? What version of VISA are they using? You can see the VISA version in MAX under the software folder. Also, to clarify, are you speaking about the "VISA Options" tab that appears when you select NI-VISA from the software folder, or something else?
If you need to download a newer version of VISA, see here for all VISA versions:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BAC002C51FA?opendocument&node=132070_US
Hope this helps.
Scott B.
Applications Engineer
National Instruments

IView not visible for a single user

Hi All,
I am facing the a problem in our client's portal. The application is not visible for one of our client user on the portal. When he clicks on the Role->Workset->Application name, the IView is not displayed on the screen. Instead, blank page is shown.
This is happening only to him. Other users are able to see the application and run it. I even tried by removing the roles assigned to him which are related to the application and re-assigned it. But the problem still persists.
He is facing this problem only from past 2 days. Till then it was working fine.
Please let me know how can this be solved.
Regards,
Poojith MV

Hi,
Firstly, we do not have the personalization option on the portal. We also requested the user to try the portal on a different which we thought could be a browser problem.
However, the result is same on a different machine. But other users who use the same system are able to view the application. I am unable to figure out what could be wrong for just one user?
The setting "Entry Point" is set to "yes".
The latest update is that, the user has 2 id's created for himself with the same portal roles. The second user id is working fine, but the first user id is failing to view the application
Regards,
Poojith MV

JDeveloper 11.1.1.3 : .bpel file Design tab not visible

Hello Everyone,
I am new to jdev BPEL processes and started using Jdeveloper as part of approval workflows in OIM 11G that needs to be developed in jdev.
I have created an approval application and bpel processes but the problem that I am seeing is that *.bpel file when opened in jdeveloper does not have a design view tab.
If any of you have seen this issue or know of possible fix for this let me know.
Thanks,
Deepak

hi deepak.. bpel design tab.. is part of soa extension.. so please install the soa extension then you will be able to see..
bpel design. tab.
note: if the extension is not there.. the composite.xml itslf.. comes without design tab.. and there is no soa application available for you in New - Soa Application..
download the same from here
http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/156082.xml#oracle.sca.modeler
note to download the version that supports your jdeveloper..

SP 2010 Publishing - Rollup and Page Images not visible when entering page edit mode

All:
Hello, I have an odd issue recently appearing after installation of FEB 2013 CU install. When users select to Edit a Publishing Page the Rollup Image and also Page Image(Article Page Layout) are not visible. Only the "Click here to insert Image from
SharePoint" link is visible.
The issue has be confirmed in 5 servers across two farms
DEV, QA, and PROD on client recently updated
DEV and PROD in a completely separate client farm
I have confirmed the issue does not exist in two separate farms running April 2012 CU. In both of those environments the image appears with issue even in Edit page mode.
In the farms where the issue exists you can click the insert image link and simply hit OK to see the image again. An easy enough work around for tech savvy but my client's content admins are very confused/frustrated by.
Is this a bug? I have confirmed in two separate farms including brand new web applications using out of the box publishing site templates.

Hi.
We have been facing the same issue in a 2013-environment (SP1), but in this case an upgraded 2010 Solution, which still runs in 2010-mode. Because of this, SharePoint still use resource-files in the 14-hive (as we have not performed an upgrade of Master
Pages etc.) The problem is also reproduced on a clean 2010 Site Collection in the same 2013-environment.
I have managed to find the cause of the problem (at least in our environment), and that is that as long as the selected picture/image has
not defined an "AltText"/"Alternate Text" the problem seems to occur.
In other words, try to define an Alternate Text and click OK in the "Edit Image Properties" Dialog.
I don't know if this may be the case for everyone else, but give it a try.
From this, I've further discovered (after hours of js-debugging) that there is a minor change (from 2010 to 2013) in a js-file called "SelectorControls.js" which is responsible for updating the various controls used in Page Layouts etc.
The problem exist in a method called ASO_UpdateButtonsAndPanels(), which checks whether the Image Control in question has content or not (Url). The local variable "hasContent" is then determined of an if statement, if(this.AssetData.ManageLinkDisplayText)
which in 2010 (14-hive) seems to be "true" regardless whether the Control is of type Image or Hyperlink. Further the code checks for AssetText (Alternate Text) which on an Image may be left empty.
In 2013 (15-hive) however, this if statement has been changed to, if(this.SelectorType==ConstLinkSelectorType), which clearly states "Image" or "Link" depending on the type of control.
I don't know if this is the cause of the problem in 2013, but in 2010 it seems to be exactly that.
Pending a solution from Microsoft, we have modified SelectorControls.js to overcome this issue until the customer decides to do a Visual Upgrade to 2013.
This is by all means not a supported nor a a permanent solution to the problem, as future Hotfixes, Service Pack etc. may "reset" our fix.
Below is a copy of the working solution:
function ASO_UpdateButtonsAndPanels()
{ULSuBa:;
var hasContent=!!this.AssetData.AssetUrl;
//SharePoint 2010: ManageLinkDisplayText is always "True"
//var hasContent=!!this.AssetData.AssetUrl;
//if(this.AssetData.ManageLinkDisplayText)
//hasContent=hasContent && !!this.AssetData.AssetText;
//SharePoint 2013
//var a=!!this.AssetData.AssetUrl;
//if(this.SelectorType==ConstLinkSelectorType) a = a && !!this.AssetData.AssetText;
//Fix for preventing existing selected image to disappear when saving page and/or editing a page with existing image.
if(this.SelectorType!=ConstImageSelectorType)
if(this.AssetData.ManageLinkDisplayText)
hasContent=hasContent && !!this.AssetData.AssetText;
if( hasContent )
if (this.ClearAssetButton !=null)
this.ClearAssetButton.EnableButton();
this.GetAssetSelectedPanel().style.display="inline";
this.GetEmptyPanel().style.display="none";
else
if (this.ClearAssetButton !=null)
this.ClearAssetButton.DisableButton();
this.GetAssetSelectedPanel().style.display="none";
this.GetEmptyPanel().style.display="inline";
I hope this helps anyone else struggling with the same problem.
Thanks!
Øyvind

BI Publisher Tab not visible in Windows 2007 with Windows 7 64 bit Config

Hi All,
I was working with BI Publisher till last week in my system having windows 7 64 bit edition with Windows Word 2007 installed. When i started my work on Tuesday this week, i was not able to see the BI publisher Tab in the Word. But it's visible in Excel. I tried looking in to the forum and got solutions such as Enabling Macros, Enabling the Trust Access to VBA Project Model and Re installing Word and BI Publisher.I tried everything but still the issue is not resolved.
I dont find any *.exd file present in my system to prevent the Add-Ins from displaying. I'm not sure what update had made the BI Publisher to be hidden. Please let me know if you any suggestion or workaround as my project is in critical state with strict deadlines.
Thanks,
Bala Maheshwaran

If you cannot show the BI Publisher Macros in Word :
1.     You have to uninstall the BI Publisher desktop
2.     Install the BI Publisher as (Right-click on the "Command Prompt" item and select "Run as administrator".)
3.     If you cannot show the BI Publisher macros and in word options show TBmenu as disable you have to do :
4.     Click the Microsoft Office Button , click Word Options, and then click Add-Ins.
5.     In the Add-ins box, identify the add-in that you want to enable and note the Add-in type located in the Type column.
6.     Select the Add-in type in the Manage box and then click Go
7.     Select the check box for the Add-in that you want enable and then click OK.
8.     Close the word
9.     Reopen the word , than appear the BI Publisher
Azita

Traffic Redirection tab not visible in PRSM single device mode

Similar Messages

Maybe you are looking for