Traffic Signals in ALV
Hi ,
Can any one please tell me how to implement traffic signals in ALV.
Regards
Arun
Traffic Signals - Nice term.
This is the program, you should be looking for :
<b>BCALV_GRID_04</b>
In brief, this is what the program does,
a) Have an additional field in the internal table
b) Mark it as the exception field in the layout
c) This additional field should have values, 1, 2 or 3
Regards,
Subramanian V.
Similar Messages
-
Traffic Signals in ALV Without using oops only for normal Grid Display.
Hi Experts ,
I need to add traffic signals into my normal ALV Grid program without using oops concepts.
Please any one send me full code or provide me one program code without using oops concept for normal ALV Grid .
I searched in many forums but i found most of the programs wriiten using oops concept with ALV's but here my requirement without using oops concept and only normal reuse_alv_grid_display.
Thanks in Advance.
Venky.You can check the below sample code.Traffic light is implemented in it.
REPORT ztest NO STANDARD PAGE HEADING
LINE-SIZE 255 MESSAGE-ID zlqm.
TYPE-POOLS : slis,icon.
TABLES :qals,qave.
INCLUDE : zlqmr002_top, "Global Data Declaration
zlqmr002_selection_screen, "Selection Screen Inputs
zlqmr002_subroutine. "Subroutines
INITIALIZATION
INITIALIZATION.
PERFORM variant_init.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
Check for Variant existance
PERFORM pai_of_selection_screen.
*Validation for Material
AT SELECTION-SCREEN ON s_matnr.
IF NOT s_matnr IS INITIAL.
SELECT SINGLE matnr
INTO g_matnr
FROM mara
WHERE matnr IN s_matnr.
IF sy-subrc <> 0.
SET CURSOR FIELD 'S_MATNR'.
MESSAGE e000 WITH text-003.
ENDIF.
ENDIF.
*Validation for Plant
AT SELECTION-SCREEN ON s_werk.
IF NOT s_werk IS INITIAL.
SELECT SINGLE werks
INTO g_werk
FROM t001w
WHERE werks IN s_werk.
IF sy-subrc <> 0.
SET CURSOR FIELD 'S_WERK'.
MESSAGE e000 WITH text-004.
ENDIF.
ENDIF.
*Validation for Inspection Type
AT SELECTION-SCREEN ON s_art.
IF NOT s_art IS INITIAL.
SELECT SINGLE art
INTO g_art
FROM tq30
WHERE art IN s_art.
IF sy-subrc <> 0.
SET CURSOR FIELD 'S_ART'.
MESSAGE e000 WITH text-005.
ENDIF.
ENDIF.
*Validation for Code group
AT SELECTION-SCREEN ON s_vcdgrp.
IF NOT s_vcdgrp IS INITIAL.
SELECT SINGLE codegruppe
INTO g_vcdgrp
FROM qpgr
WHERE codegruppe IN s_vcdgrp.
IF sy-subrc <> 0.
SET CURSOR FIELD 'S_VCDGRP'.
MESSAGE e000 WITH text-006.
ENDIF.
ENDIF.
*Validation for Code
AT SELECTION-SCREEN ON s_vcode.
IF NOT s_vcode IS INITIAL.
SELECT SINGLE code
INTO g_vcode
FROM qpcd
WHERE code IN s_vcode.
IF sy-subrc <> 0.
SET CURSOR FIELD 'S_VCODE'.
MESSAGE e000 WITH text-007.
ENDIF.
ENDIF.
Process on value request
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vcdgrp-low.
PERFORM get_codegroup.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vcdgrp-high.
PERFORM get_codegroup.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vcode-low.
PERFORM get_code.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vcode-high.
PERFORM get_code.
START-OF-SELECTION.
START-OF-SELECTION.
**Selecting data form Database tables
PERFORM select_data TABLES i_out i_out1.
END-OF-SELECTION
END-OF-SELECTION.
**Generate ALV
PERFORM generate_alv.
DATA TYPES
TYPES : BEGIN OF t_qals,
matnr TYPE qals-matnr, "Material
werk TYPE qals-werk, "Plant
mengeneinh TYPE qals-mengeneinh, "UOM
lmenge01 TYPE qals-lmenge01, "Unrestricted qty
lmenge02 TYPE qals-lmenge02, "Scrap qty
lmenge03 TYPE qals-lmenge03, "Sample qty
lmenge04 TYPE qals-lmenge04, "Blocked qty
lmenge05 TYPE qals-lmenge05, "Retain qty
lmenge06 TYPE qals-lmenge06, "Othermat qty
lmenge07 TYPE qals-lmenge07, "RTV qty
lmenge08 TYPE qals-lmenge08, "Exp.scrap qty
prueflos TYPE qals-prueflos, "Inspection lot
art TYPE qals-art, "Inspection type
charg TYPE qals-charg, "Batch
vcode TYPE qave-vcode, "Usage decision
vdatum TYPE qave-vdatum, "Date
qmnum TYPE qmel-qmnum, "Notification
END OF t_qals.
TYPES : BEGIN OF t_out,
icon TYPE icon-id, "Status
matnr TYPE qals-matnr, "Material
werk TYPE qals-werk, "Plant
mengeneinh TYPE qals-mengeneinh, "UOM
vcode TYPE qave-vcode, "Usage decision
mncod(30) TYPE c, "Disposition
lmenge01 TYPE qals-lmenge01, "Unrestricted qty
lmenge02 TYPE qals-lmenge02, "Scrap qty
lmenge03 TYPE qals-lmenge03, "Sample qty
lmenge04 TYPE qals-lmenge04, "Blocked qty
lmenge05 TYPE qals-lmenge05, "Retain qty
lmenge06 TYPE qals-lmenge06, "Othermat qty
lmenge07 TYPE qals-lmenge07, "RTV qty
lmenge08 TYPE qals-lmenge08, "Exp.scrap qty
prueflos TYPE qals-prueflos, "Inspection lot
art TYPE qals-art, "Inspection type
qmnum TYPE qmel-qmnum, "Notification
vdatum TYPE qave-vdatum, "Date
charg TYPE qals-charg, "Batch
END OF t_out.
TYPES : BEGIN OF t_qmsm,
qmnum TYPE qmsm-qmnum,
manum TYPE qmsm-manum,
mncod TYPE qmsm-mncod,
END OF t_qmsm.
TYPES: BEGIN OF t_disp,
qmnum TYPE qmsm-qmnum,
mncod(30) TYPE c,
END OF t_disp.
TYPES: BEGIN OF t_codegrp,
katalogart TYPE qpgt-katalogart,
codegruppe TYPE qpgt-codegruppe,
kurztext TYPE qpgt-kurztext,
END OF t_codegrp.
TYPES: BEGIN OF t_code,
katalogart TYPE qpct-katalogart,
codegruppe TYPE qpct-codegruppe,
code TYPE qpct-code,
version TYPE qpct-version,
kurztext TYPE qpct-kurztext,
END OF t_code.
INTERNAL TABLES
DATA: i_qals TYPE TABLE OF t_qals,
wa_qals LIKE LINE OF i_qals,
i_qmsm TYPE TABLE OF t_qmsm,
wa_qmsm TYPE t_qmsm,
i_disp TYPE TABLE OF t_disp,
wa_disp LIKE LINE OF i_disp,
i_out TYPE TABLE OF t_out,
wa_out TYPE t_out,
i_out1 TYPE TABLE OF t_out,
wa_out1 TYPE t_out,
i_codegrp TYPE TABLE OF t_codegrp,
i_code TYPE TABLE OF t_code,
i_qmsm_tmp TYPE TABLE OF t_qmsm.
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
i_layout TYPE slis_layout_alv,
g_repid TYPE sy-repid,
wa_fieldcat TYPE slis_fieldcat_alv.
Global Variables
DATA : g_matnr TYPE matnr,
g_werk TYPE werks,
g_art TYPE qpart,
g_vcdgrp TYPE qvgruppe,
g_vcode TYPE qvcode,
g_red TYPE c,
g_yellow TYPE c,
g_table(6) TYPE c,
g_save(1) TYPE c,
g_exit(1) TYPE c,
g_report TYPE sy-repid,
g_var TYPE disvariant,
g_variant TYPE disvariant.
Constants
CONSTANTS: c_green TYPE icon-id VALUE '@08@',
c_yellow TYPE icon-id VALUE '@09@',
c_red TYPE icon-id VALUE '@0A@'.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_matnr FOR qals-matnr, "Material Number
s_werk FOR qals-werk, "Plant
s_art FOR qals-art, "Inspection Type
s_vcdgrp FOR qave-vcodegrp, "Usage Decision Code Group
s_vcode FOR qave-vcode, "Usage Decision Code
s_vdatum FOR qave-vdatum. "Usage Decision Code Date
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_all RADIOBUTTON GROUP g1 DEFAULT 'X',
p_excp RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-009.
"Variant Selection
PARAMETERS: p_vari TYPE disvariant-variant.
SELECTION-SCREEN END OF BLOCK b3.
*& Form select_data
Select Inspection Details
FORM select_data TABLES p_out STRUCTURE wa_out
p_out1 STRUCTURE wa_out.
DATA:l_mncod(30) TYPE c.
REFRESH : i_qals,i_qmsm,i_qmsm_tmp,i_disp,p_out.
SELECT qalsmatnr qalswerk qals~mengeneinh
qalslmenge01 qalslmenge02 qals~lmenge03
qalslmenge04 qalslmenge05 qals~lmenge06
qalslmenge07 qalslmenge08 qals~prueflos
qalsart qalscharg qave~vcode
qavevdatum qmelqmnum
INTO CORRESPONDING FIELDS OF TABLE i_qals
FROM qals
INNER JOIN qave
ON qalsprueflos = qaveprueflos
INNER JOIN qmel
ON qalsprueflos = qmelprueflos
WHERE qals~matnr IN s_matnr
AND qals~werk IN s_werk
AND qals~art IN s_art
AND qals~stat34 EQ 'X'
AND qave~vcodegrp IN s_vcdgrp
AND qave~vcode IN s_vcode
AND qave~vdatum IN s_vdatum.
IF sy-subrc NE 0.
MESSAGE i000 WITH text-008.
ENDIF.
IF NOT i_qals IS INITIAL.
SELECT qmnum manum mncod INTO TABLE i_qmsm
FROM qmsm
FOR ALL ENTRIES IN i_qals
WHERE qmnum EQ i_qals-qmnum
AND mngrp LIKE 'Q_D%'
AND kzloesch NE 'X'.
ENDIF.
***Concatenation of Disposition Codes
IF NOT i_qmsm IS INITIAL.
i_qmsm_tmp = i_qmsm.
SORT i_qmsm_tmp BY qmnum mncod.
DELETE ADJACENT DUPLICATES FROM i_qmsm_tmp COMPARING qmnum mncod+0(2).
CLEAR wa_qmsm.
LOOP AT i_qmsm_tmp INTO wa_qmsm.
MOVE wa_qmsm-qmnum TO wa_disp-qmnum.
CONCATENATE l_mncod wa_qmsm-mncod+0(2) INTO l_mncod SEPARATED BY space.
AT END OF qmnum.
SHIFT l_mncod LEFT DELETING LEADING space.
MOVE l_mncod TO wa_disp-mncod.
APPEND wa_disp TO i_disp.
CLEAR:wa_disp,l_mncod.
ENDAT.
ENDLOOP.
ENDIF.
***Transfer of data to the output table
LOOP AT i_qals INTO wa_qals.
MOVE-CORRESPONDING wa_qals TO wa_out.
CLEAR wa_disp.
READ TABLE i_disp INTO wa_disp
WITH KEY qmnum = wa_qals-qmnum.
IF sy-subrc EQ 0.
MOVE wa_disp-mncod TO wa_out-mncod.
ENDIF.
PERFORM check_quantity USING wa_qals.
CLEAR wa_qmsm.
LOOP AT i_qmsm INTO wa_qmsm
WHERE qmnum EQ wa_qals-qmnum.
PERFORM check_group USING wa_qals
wa_qmsm.
CLEAR wa_qmsm.
ENDLOOP.
IF g_red NE 'X'.
CLEAR wa_qmsm.
LOOP AT i_qmsm INTO wa_qmsm WHERE qmnum = wa_qals-qmnum
AND mncod0(2) NE wa_qals-vcode0(2).
g_yellow = 'X'.
ENDLOOP.
ENDIF.
IF g_yellow EQ 'X'.
MOVE c_yellow TO wa_out-icon.
ELSEIF g_red EQ 'X'.
MOVE c_red TO wa_out-icon.
ELSE.
MOVE c_green TO wa_out-icon.
ENDIF.
APPEND wa_out TO p_out.
CLEAR:wa_qals,wa_out,g_red,g_yellow.
ENDLOOP.
***IF only exceptions are need to be displayed
IF p_excp EQ 'X'.
CLEAR wa_out.
LOOP AT p_out INTO wa_out WHERE icon EQ c_red.
APPEND wa_out TO p_out1.
ENDLOOP.
ENDIF.
ENDFORM. " select_data
*& Form populate_fieldcat
Populate the Fieldcat Table
FORM populate_fieldcat USING p_table TYPE c.
**status
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'ICON'.
wa_fieldcat-seltext_l = text-010.
wa_fieldcat-outputlen = 15.
wa_fieldcat-icon = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
**Material
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-seltext_l = text-011.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO i_fieldcat.
**Plant
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'WERK'.
wa_fieldcat-seltext_l = text-012.
wa_fieldcat-outputlen = 7.
APPEND wa_fieldcat TO i_fieldcat.
**Usage Decision
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'VCODE'.
wa_fieldcat-seltext_l = text-013.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO i_fieldcat.
**Dispositions
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'MNCOD'.
wa_fieldcat-seltext_l = text-014.
wa_fieldcat-outputlen = 18.
APPEND wa_fieldcat TO i_fieldcat.
**UOM
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'MENGENEINH'.
wa_fieldcat-seltext_l = text-015.
wa_fieldcat-outputlen = 18.
APPEND wa_fieldcat TO i_fieldcat.
**Unrestricted Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE01'.
wa_fieldcat-seltext_l = text-016.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Scrap Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE02'.
wa_fieldcat-seltext_l = text-017.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Sample Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE03'.
wa_fieldcat-seltext_l = text-018.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Blocked Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE04'.
wa_fieldcat-seltext_l = text-019.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Retain Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE05'.
wa_fieldcat-seltext_l = text-020.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Other Mat Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE06'.
wa_fieldcat-seltext_l = text-021.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**RTV Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE07'.
wa_fieldcat-seltext_l = text-022.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Exp. Scrap Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE08'.
wa_fieldcat-seltext_l = text-023.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Inspection Lot
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'PRUEFLOS'.
wa_fieldcat-seltext_l = text-024.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Inspection Type
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'ART'.
wa_fieldcat-seltext_l = text-025.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Notification
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'QMNUM'.
wa_fieldcat-seltext_l = text-026.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Date
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'VDATUM'.
wa_fieldcat-seltext_l = text-027.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Batch
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'CHARG'.
wa_fieldcat-seltext_l = text-028.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " populate_fieldcat
*& Form check_quantity
To Check the Quantity
FORM check_quantity USING p_qals TYPE t_qals.
IF wa_qals-lmenge01 GT 0.
LOOP AT i_disp TRANSPORTING NO FIELDS
WHERE qmnum EQ wa_qals-qmnum
AND ( mncod CP 'UI'
OR mncod CP 'SR'
OR mncod CP 'ND' ).
ENDLOOP.
IF sy-subrc NE 0.
g_red = 'X'.
ENDIF.
ENDIF.
IF wa_qals-lmenge02 GT 0 AND g_red NE 'X'.
LOOP AT i_disp TRANSPORTING NO FIELDS
WHERE qmnum EQ wa_qals-qmnum
AND ( mncod CP 'SC'
OR mncod CP 'SR' ).
ENDLOOP.
IF sy-subrc NE 0.
g_red = 'X'.
ENDIF.
ENDIF.
IF wa_qals-lmenge04 GT 0 AND g_red NE 'X'.
LOOP AT i_disp TRANSPORTING NO FIELDS
WHERE qmnum EQ wa_qals-qmnum
AND ( mncod CP 'RW'
OR mncod CP 'RD' ).
ENDLOOP.
IF sy-subrc NE 0.
g_red = 'X'.
ENDIF.
ENDIF.
IF wa_qals-lmenge05 GT 0 AND g_red NE 'X'.
LOOP AT i_disp TRANSPORTING NO FIELDS
WHERE qmnum EQ wa_qals-qmnum
AND mncod CP 'R1'.
ENDLOOP.
IF sy-subrc NE 0.
g_red = 'X'.
ENDIF.
ENDIF.
IF wa_qals-lmenge06 GT 0 AND g_red NE 'X'.
LOOP AT i_disp TRANSPORTING NO FIELDS
WHERE qmnum EQ wa_qals-qmnum
AND mncod CP 'RD'.
ENDLOOP.
IF sy-subrc NE 0.
g_red = 'X'.
ENDIF.
ENDIF.
IF wa_qals-lmenge07 GT 0 AND g_red NE 'X'.
LOOP AT i_disp TRANSPORTING NO FIELDS
WHERE qmnum EQ wa_qals-qmnum
AND mncod CP 'RV'.
ENDLOOP.
IF sy-subrc NE 0.
g_red = 'X'.
ENDIF.
ENDIF.
IF wa_qals-lmenge08 GT 0 AND g_red NE 'X'.
LOOP AT i_disp TRANSPORTING NO FIELDS
WHERE qmnum EQ wa_qals-qmnum
AND ( mncod CP 'SC'
OR mncod CP 'SE' ).
ENDLOOP.
IF sy-subrc NE 0.
g_red = 'X'.
ENDIF.
ENDIF.
ENDFORM. " check_quantity
*& Form check_group
To check the Disposition Code
FORM check_group USING p_qals TYPE t_qals
p_qmsm TYPE t_qmsm.
IF p_qmsm-mncod+0(2) EQ 'UI' AND
NOT p_qals-lmenge01 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'RW' AND
NOT p_qals-lmenge04 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'SC' AND
NOT p_qals-lmenge02 GT 0 AND
NOT p_qals-lmenge08 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'SE' AND
NOT p_qals-lmenge08 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'RV' AND
NOT p_qals-lmenge07 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'SR' AND
NOT p_qals-lmenge01 GT 0 AND
NOT p_qals-lmenge02 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'ND' AND
NOT p_qals-lmenge01 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'R1' AND
NOT p_qals-lmenge05 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'RD' AND
NOT p_qals-lmenge04 GT 0 AND
NOT p_qals-lmenge06 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
ENDFORM. " check_group
*& Form call_alv
Call ALV Grid Display
FORM call_alv TABLES p_out STRUCTURE wa_out.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = g_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout = i_layout
it_fieldcat = i_fieldcat[]
TABLES
t_outtab = p_out
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " call_alv
*& Form generate_alv
Build ALV
FORM generate_alv .
IF NOT i_out IS INITIAL OR
NOT i_out1 IS INITIAL.
g_repid = sy-repid.
IF p_excp EQ 'X'.
MOVE 'I_OUT1' TO g_table.
ELSEIF p_all EQ 'X'.
MOVE 'I_OUT' TO g_table.
ENDIF.
PERFORM populate_fieldcat USING g_table.
i_layout-zebra = 'X'.
i_layout-colwidth_optimize = 'X'.
IF p_excp = 'X'.
PERFORM call_alv TABLES i_out1.
ELSEIF p_all = 'X'.
PERFORM call_alv TABLES i_out.
ENDIF.
ENDIF.
ENDFORM. " generate_alv
*& Form PF_STATUS_SET
Setting PF Status
FORM pf_status_set USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'STATUS1' .
ENDFORM. "PF_STATUS_SET
*& Form USER_COMMAND
User Command Processing
FORM user_command USING r_ucomm TYPE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN 'UDG'.
IF p_all EQ 'X'.
CLEAR wa_out.
READ TABLE i_out INTO wa_out INDEX rs_selfield-tabindex.
SET PARAMETER ID 'QLS' FIELD wa_out-prueflos.
ELSEIF p_excp EQ 'X'.
CLEAR wa_out1.
READ TABLE i_out1 INTO wa_out1 INDEX rs_selfield-tabindex.
SET PARAMETER ID 'QLS' FIELD wa_out1-prueflos.
ENDIF.
CALL TRANSACTION 'QA13' AND SKIP FIRST SCREEN.
WHEN 'QNF'.
IF p_all EQ 'X'.
CLEAR wa_out.
READ TABLE i_out INTO wa_out INDEX rs_selfield-tabindex.
SET PARAMETER ID 'IQM' FIELD wa_out-qmnum.
ELSEIF p_excp EQ 'X'.
CLEAR wa_out1.
READ TABLE i_out1 INTO wa_out1 INDEX rs_selfield-tabindex.
SET PARAMETER ID 'IQM' FIELD wa_out1-qmnum.
ENDIF.
CALL TRANSACTION 'QM03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM. "USER_COMMAND
*& Form variant_init
Initialize variant
FORM variant_init .
Set Options: save variants userspecific or general
g_save = 'A'.
g_report = sy-repid.
g_var-report = g_report.
Get default variant
g_variant = g_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = g_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = g_variant-variant.
ENDIF.
ENDFORM. " variant_init
*& Form f4_for_variant
F4 help for variant
FORM f4_for_variant .
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = g_var
i_save = g_save
IMPORTING
e_exit = g_exit
es_variant = g_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF g_exit = space.
p_vari = g_variant-variant.
ENDIF.
ENDIF.
ENDFORM. " f4_for_variant
*& Form pai_of_selection_screen
Check existence of Variant
FORM pai_of_selection_screen .
IF NOT p_vari IS INITIAL.
MOVE g_var TO g_variant.
MOVE p_vari TO g_variant-variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = g_save
CHANGING
cs_variant = g_variant.
g_var = g_variant.
ELSE.
PERFORM variant_init.
ENDIF.
ENDFORM. " pai_of_selection_screen
*& Form get_codegroup
Get F4 help for Code Group
FORM get_codegroup .
DATA: i_return TYPE TABLE OF ddshretval.
SELECT katalogart codegruppe kurztext FROM qpgt
INTO TABLE i_codegrp
WHERE katalogart EQ '3'
AND sprache EQ sy-langu.
IF sy-subrc EQ 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'CODEGRUPPE'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_VCDGRP'
value_org = 'S'
TABLES
value_tab = i_codegrp[]
return_tab = i_return[]
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " get_codegroup
*& Form get_code
Get F4 help for Code
FORM get_code .
DATA: l_field TYPE rsscr-name VALUE 'S_VCDGRP',
l_field_kind TYPE rsscr-kind VALUE 'S',
li_par_values TYPE TABLE OF rsparams,
la_par_values TYPE rsparams,
r_cdgrp TYPE RANGE OF qpct-codegruppe,
la_cdgrp LIKE LINE OF r_cdgrp.
**Get the values entered in the selection screen
PERFORM f4_get_related_values IN PROGRAM rsdbspf4
TABLES li_par_values
USING l_field l_field_kind.
IF NOT li_par_values IS INITIAL.
CLEAR:la_cdgrp,la_par_values.
LOOP AT li_par_values INTO la_par_values.
MOVE-CORRESPONDING la_par_values TO la_cdgrp.
IF la_cdgrp-option IS INITIAL.
MOVE 'EQ' TO la_cdgrp-option.
ENDIF.
APPEND la_cdgrp TO r_cdgrp.
CLEAR la_cdgrp.
ENDLOOP.
ENDIF.
SELECT katalogart codegruppe
code version
kurztext FROM qpct
INTO TABLE i_code
WHERE katalogart EQ '3'
AND codegruppe IN r_cdgrp
AND sprache EQ sy-langu.
IF sy-subrc EQ 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'CODE'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_VCODE'
value_org = 'S'
TABLES
value_tab = i_code[]
return_tab =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " get_code -
I am displaying status (traffic signal ) in output screen in tree display
hi all,
i am displaying status (traffic signal ) in output screen in tree display but instead its displaying <b>@08@</b> like text format....is there any need of conversion....
but it works in normal ALV grid layout.
please suggest a solution....... !
regards.
sivaram.You need to do the following three steps in order to have "status" indicators on your ALV list:
(1) Add a status or exception field to your itab definition, e.g.
TYPES: BEGIN OF ty_s_outtab.
TYPES: status(4) TYPE c. " status field for LED / traffic light
INCLUDE TYPE KNB1.
TYPES: END OF ty_s_outtab.
DATA:
gt_outtab TYPE STANDARD TABLE OF ty_s_outtab
WITH DEFAULT KEY.
(2) Define the status field in the layout (LVC_S_LAYO):
gs_layout-excp_fname = 'STATUS'. " name of the status/exception field
gs_layout-excp_led = 'X'. " display LEDs, else traffic lights
(3) Loop over the itab and set the appropriate status:
LOOP AT gt_outtab INTO ls_outtab.
IF ( <condition is fulfilled> ).
ls_outtab-status = '3'. " green
ELSEIF ( <condition partially fulfilled> ).
ls_outtab-status = '2'. " yellow
ELSE.
ls_outtab-status = '1'. " red
ENDIF.
MODIFY gt_outtab FROM ls_outtab.
ENDLOOP.
reward points if it is usefull....
Girish -
How we can drill-down, sorting, traffic lights, in ALV report
hi gurus ,
how we can drill-down, sorting, traffic lights, in ALV report .
please any one suggest that...
regards,
praveenCheck the sample code for drill-down, sorting, traffic lights, in ALV report.
REPORT YMS_COLOURALV NO STANDARD PAGE HEADING.
TYPE-POOLS: SLIS, ICON.
DATA: FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: BEGIN OF IMARA OCCURS 0,
LIGHT(4) TYPE C,
MATNR TYPE MARA-MATNR,
MTART TYPE MARA-MTART,
MAKTX TYPE MAKT-MAKTX,
COLOR_LINE(4) TYPE C,
TCOLOR TYPE SLIS_T_SPECIALCOL_ALV, "cell
END OF IMARA.
DATA: XCOLOR TYPE SLIS_SPECIALCOL_ALV.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM WRITE_REPORT.
FORM GET_DATA.
WRITE ICON_GREEN_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'ABC'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for ABC'.
APPEND IMARA.
WRITE ICON_YELLOW_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'DEF'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for DEF'.
APPEND IMARA.
WRITE ICON_RED_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'GHI'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for GHI'.
APPEND IMARA.
LOOP AT IMARA.
IF SY-TABIX = 1.
IMARA-COLOR_LINE = 'C410'. " color line
ENDIF.
IF SY-TABIX = 2. " color CELL
CLEAR XCOLOR.
XCOLOR-FIELDNAME = 'MTART'.
XCOLOR-COLOR-COL = '3'.
XCOLOR-COLOR-INT = '1'. " Intensified on/off
XCOLOR-COLOR-INV = '0'.
APPEND XCOLOR TO IMARA-TCOLOR.
ENDIF.
MODIFY IMARA.
ENDLOOP.
ENDFORM. "get_data
FORM WRITE_REPORT.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV.
LAYOUT-COLTAB_FIELDNAME = 'TCOLOR'.
LAYOUT-INFO_FIELDNAME = 'COLOR_LINE'.
PERFORM BUILD_FIELD_CATALOG.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT
TABLES
T_OUTTAB = IMARA.
ENDFORM. "write_report
FORM BUILD_FIELD_CATALOG.
DATA: FC_TMP TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
CLEAR: FIELDCAT. REFRESH: FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Status'.
FC_TMP-FIELDNAME = 'LIGHT'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '4'.
FC_TMP-ICON = 'X'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material Number'.
FC_TMP-FIELDNAME = 'MATNR'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '18'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material Type'.
FC_TMP-FIELDNAME = 'MTART'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '10'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material'.
FC_TMP-FIELDNAME = 'MAKTX'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '40'.
APPEND FC_TMP TO FIELDCAT.
ENDFORM. "build_field_catalog -
Display Traffic Lights in ALV TREE
Hi,
I have to display traffic light in ALV tree but i am not able to find out what parameter i should pass like in ALV grid where we can set is_layout (BCALV_GRID_04).
Thanks in advance.
Regards,
HarshHi,
Please take a look at my code below. Hope it suits your requirement.
P.S. Please award points if it helps...
*& Report ZMM_R_PO_TO_IPURCH_XI
*& PROGRAM TYPE : Report
*& RICEF ID :
*& TITLE : ZMM_R_PO_TO_IPURCH_XI
*& SAP Module : MM
*& CREATION DATE : 02/06/2008
*& AUTHOR : Aris Hidalgo
*& DESIGNER : Aris Hidalgo
*& DESCRIPTION :
*$**********************************************************************
*$ CHANGE HISTORY
*$----------------------------------------------------------------------
*$ DATE | T-Num | Description | Reference
** | | |
*$**********************************************************************
REPORT zmm_r_po_to_ipurch_xi
NO STANDARD PAGE HEADING
MESSAGE-ID zmm.
* Data Dictionary Table/s *
TABLES: edidc.
* SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_credat FOR edidc-credat OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: rb_sum RADIOBUTTON GROUP grp1,
rb_det RADIOBUTTON GROUP grp1.
SELECTION-SCREEN END OF BLOCK b2.
*/ CLASS DEFINITION/S /*
* CLASS lcl_data_def DEFINITION
CLASS lcl_data_def DEFINITION ABSTRACT.
PUBLIC SECTION.
TYPES: BEGIN OF t_edidc,
docnum TYPE edidc-docnum,
docrel TYPE edidc-docrel,
status TYPE edidc-status,
doctyp TYPE edidc-doctyp,
direct TYPE edidc-direct,
rcvpor TYPE edidc-rcvpor,
rcvprt TYPE edidc-rcvprt,
rcvprn TYPE edidc-rcvprn,
rcvsad TYPE edidc-rcvsad,
sndpor TYPE edidc-sndpor,
sndprt TYPE edidc-sndprt,
sndprn TYPE edidc-sndprn,
sndsad TYPE edidc-sndsad,
credat TYPE edidc-credat,
cretim TYPE edidc-cretim,
mestyp TYPE edidc-mestyp,
idoctp TYPE edidc-idoctp,
END OF t_edidc.
TYPES: BEGIN OF t_output,
exception TYPE char1,
ebeln TYPE ekko-ebeln,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
credat TYPE edidc-credat,
cretim TYPE edidc-cretim,
END OF t_output.
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekko-ebeln,
lifnr TYPE ekko-lifnr,
END OF t_ekko.
TYPES: BEGIN OF t_lfa1,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF t_lfa1.
DATA: gt_edidc TYPE STANDARD TABLE OF t_edidc,
gt_output TYPE STANDARD TABLE OF t_output,
wa_output LIKE LINE OF gt_output,
gt_ekko TYPE HASHED TABLE OF t_ekko
WITH UNIQUE KEY ebeln,
gt_lfa1 TYPE HASHED TABLE OF t_lfa1
WITH UNIQUE KEY lifnr.
ENDCLASS. "lcl_data_def DEFINITION
CLASS lcl_alv_routines DEFINITION DEFERRED.
CLASS lcl_handle_events DEFINITION DEFERRED.
* CLASS lcl_get_data DEFINITION
CLASS lcl_get_data DEFINITION INHERITING FROM lcl_data_def.
PUBLIC SECTION.
METHODS: get_idocs,
read_idocs,
process_data
IMPORTING
im_docnum TYPE edidc-docnum.
PRIVATE SECTION.
CONSTANTS: lc_mestyp TYPE edidc-mestyp VALUE 'ZMARKETSITE_PURCHASE_ORDER',
lc_idoctp TYPE edidc-idoctp VALUE 'ZMARKETSITE_PURCHASE_ORDER01',
lc_segnam TYPE edid4-segnam VALUE 'ZMARKETSITE_ORDER_HEADER1'.
CONSTANTS: lc_red TYPE i VALUE 1,
lc_yellow TYPE i VALUE 2,
lc_green TYPE i VALUE 3.
DATA: lv_stat_message TYPE bdidocattr-message,
o_lcl_alv_routines TYPE REF TO lcl_alv_routines.
DATA: ls_idoc_control TYPE edidc,
lv_tot_data_recs TYPE sy-dbcnt, "#EC NEEDED
lv_tot_status_recs TYPE sy-dbcnt. "#EC NEEDED
DATA: lt_edids TYPE STANDARD TABLE OF edids,
lt_edidd TYPE STANDARD TABLE OF edidd.
ENDCLASS. "lcl_get_data DEFINITION
* CLASS lcl_alv_routines DEFINITION
CLASS lcl_alv_routines DEFINITION INHERITING FROM lcl_get_data.
PUBLIC SECTION.
DATA: lcl_table TYPE REF TO cl_salv_table,
lcl_container TYPE REF TO cl_gui_custom_container,
lcl_handle_events TYPE REF TO lcl_handle_events,
lcl_columns TYPE REF TO cl_salv_columns_table,
lcl_column TYPE REF TO cl_salv_column_table,
lcl_events2 TYPE REF TO cl_salv_events_table,
lcl_display_settings TYPE REF TO cl_salv_display_settings,
lcl_functions TYPE REF TO cl_salv_functions_list,
lcl_display TYPE REF TO cl_salv_display_settings,
lcl_aggregations TYPE REF TO cl_salv_aggregations,
lcl_sorts TYPE REF TO cl_salv_sorts,
lcl_content TYPE REF TO cl_salv_form_element,
lcl_header TYPE REF TO cl_salv_form_header_info,
ls_color TYPE lvc_s_colo.
DATA: lcl_grid TYPE REF TO cl_salv_form_layout_grid,
lcl_grid_1 TYPE REF TO cl_salv_form_layout_grid,
lcl_grid_2 TYPE REF TO cl_salv_form_layout_grid,
lcl_label TYPE REF TO cl_salv_form_label,"#EC NEEDED
lcl_text TYPE REF TO cl_salv_form_text,
gt_t247 TYPE STANDARD TABLE OF t247,
wa_t247 LIKE LINE OF gt_t247,
lv_text TYPE string.
METHODS: display_data
IMPORTING
im_output LIKE gt_output,
display_top_of_page.
PRIVATE SECTION.
DATA: lv_string TYPE string,
lv_date1 TYPE c LENGTH 10,
lv_time TYPE c LENGTH 10,
lv_title TYPE string.
ENDCLASS. "lcl_alv_routines DEFINITION
* CLASS lcl_handle_events DEFINITION
CLASS lcl_handle_events DEFINITION.
PUBLIC SECTION.
METHODS:
on_link_click FOR EVENT link_click OF cl_salv_events_table
IMPORTING row column.
ENDCLASS. "lcl_handle_events DEFINITION
*/ IMPLEMENTATION/S /*
* CLASS lcl_get_data IMPLEMENTATION
CLASS lcl_get_data IMPLEMENTATION.
* METHOD get_idocs
METHOD get_idocs.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
* PERCENTAGE = 0
text = text-p01.
SELECT docnum docrel status doctyp
direct rcvpor rcvprt rcvprn
rcvsad sndpor sndprt sndprn
sndsad credat cretim mestyp
idoctp
FROM edidc
INTO TABLE gt_edidc
WHERE mestyp = lc_mestyp
AND idoctp = lc_idoctp
AND credat IN s_credat.
IF gt_edidc[] IS NOT INITIAL.
* Get IDOC details
CALL METHOD me->read_idocs.
ENDIF.
ENDMETHOD. "get_idocs
* METHOD read_idocs
METHOD read_idocs.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
* PERCENTAGE = 0
text = text-p02.
FIELD-SYMBOLS: <fs_edidc> LIKE LINE OF gt_edidc,
<fs_output> LIKE LINE OF gt_output,
<fs_ekko> LIKE LINE OF gt_ekko,
<fs_lfa1> LIKE LINE OF gt_lfa1.
LOOP AT gt_edidc ASSIGNING <fs_edidc>.
CLEAR ls_idoc_control.
REFRESH: lt_edids, lt_edidd.
* Get status text of IDOC
CALL FUNCTION 'IDOC_GET_MESSAGE_ATTRIBUTE'
EXPORTING
idoc_number = <fs_edidc>-docnum
IMPORTING
idoc_message = lv_stat_message.
* Get IDOC details
CALL FUNCTION 'IDOC_READ_COMPLETELY'
EXPORTING
document_number = <fs_edidc>-docnum
IMPORTING
idoc_control = ls_idoc_control
number_of_data_records = lv_tot_data_recs
number_of_status_records = lv_tot_status_recs
TABLES
int_edids = lt_edids
int_edidd = lt_edidd
EXCEPTIONS
document_not_exist = 1
document_number_invalid = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Pass data to output table
CALL METHOD me->process_data
EXPORTING
im_docnum = <fs_edidc>-docnum.
ENDLOOP.
DELETE gt_output WHERE ebeln IS INITIAL.
IF gt_output[] IS NOT INITIAL.
* Get vendor for fetched POs
SELECT ebeln lifnr
FROM ekko
INTO TABLE gt_ekko
FOR ALL ENTRIES IN gt_output
WHERE ebeln = gt_output-ebeln.
IF gt_ekko[] IS NOT INITIAL.
* Get name of vendors
SELECT lifnr name1
FROM lfa1
INTO TABLE gt_lfa1
FOR ALL ENTRIES IN gt_ekko
WHERE lifnr = gt_ekko-lifnr.
ENDIF.
* Pass vendor details to output table
LOOP AT gt_output ASSIGNING <fs_output>.
READ TABLE gt_ekko ASSIGNING <fs_ekko>
WITH TABLE KEY ebeln = <fs_output>-ebeln.
IF sy-subrc = 0.
READ TABLE gt_lfa1 ASSIGNING <fs_lfa1>
WITH TABLE KEY lifnr = <fs_ekko>-lifnr.
IF sy-subrc = 0.
<fs_output>-lifnr = <fs_lfa1>-lifnr.
<fs_output>-name1 = <fs_lfa1>-name1.
ENDIF.
ENDIF.
ENDLOOP.
CREATE OBJECT o_lcl_alv_routines.
CALL METHOD o_lcl_alv_routines->display_data
EXPORTING
im_output = gt_output[].
ENDIF.
ENDMETHOD. "read_idocs
* METHOD process_data
METHOD process_data.
FIELD-SYMBOLS: <fs_edidd> LIKE LINE OF lt_edidd.
IF lv_stat_message CP 'ok' OR
lv_stat_message CP 'positive'.
wa_output-exception = lc_green.
ELSEIF lv_stat_message CP 'error' OR
lv_stat_message CP 'negative'.
wa_output-exception = lc_red.
ELSE.
wa_output-exception = lc_yellow.
ENDIF.
READ TABLE lt_edidd ASSIGNING <fs_edidd>
WITH KEY docnum = im_docnum
segnam = lc_segnam.
IF sy-subrc = 0.
wa_output-ebeln = <fs_edidd>-sdata+0(10).
ENDIF.
wa_output-credat = ls_idoc_control-credat.
wa_output-cretim = ls_idoc_control-cretim.
APPEND wa_output TO gt_output.
CLEAR wa_output.
ENDMETHOD. "process_data
ENDCLASS. "lcl_get_data IMPLEMENTATION
* CLASS lcl_alv_routines IMPLEMENTATION
CLASS lcl_alv_routines IMPLEMENTATION.
* METHOD display_data
METHOD display_data.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
percentage = 0
text = text-p03.
gt_output[] = im_output[].
TRY.
cl_salv_table=>factory(
EXPORTING
list_display = ''
IMPORTING
r_salv_table = lcl_table
CHANGING
t_table = gt_output ).
CATCH cx_salv_msg. "#EC NO_HANDLER
ENDTRY.
lcl_functions = lcl_table->get_functions( ).
* Set all standard ALV functions
lcl_functions->set_all( abap_true ).
lcl_columns = lcl_table->get_columns( ).
lcl_columns->set_optimize( '' ).
* Set display to striped pattern
lcl_display = lcl_table->get_display_settings( ).
lcl_display->set_striped_pattern( cl_salv_display_settings=>true ).
*/Sort columns
TRY.
lcl_sorts = lcl_table->get_sorts( ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
lcl_sorts->set_group_active( ).
TRY.
lcl_sorts->add_sort(
columnname = 'EBELN'
subtotal = '' ).
CATCH cx_salv_not_found cx_salv_existing cx_salv_data_error."#EC NO_HANDLER
ENDTRY.
*/Set column names
TRY.
lcl_columns->set_exception_column( 'EXCEPTION' ).
CATCH cx_salv_data_error. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'EXCEPTION' ).
lcl_column->set_short_text( text-h01 ).
lcl_column->set_medium_text( text-h01 ).
lcl_column->set_long_text( text-h01 ).
lcl_column->set_output_length( '6' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'EBELN' ).
lcl_column->set_short_text( text-h02 ).
lcl_column->set_medium_text( text-h02 ).
lcl_column->set_long_text( text-h02 ).
lcl_column->set_output_length( '9' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'LIFNR' ).
* lcl_column->set_short_text( text-h03 ).
lcl_column->set_medium_text( text-h03 ).
lcl_column->set_long_text( text-h03 ).
lcl_column->set_output_length( '11' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'NAME1' ).
* lcl_column->set_short_text( text-h04 ).
* lcl_column->set_medium_text( text-h04 ).
lcl_column->set_long_text( text-h04 ).
lcl_column->set_output_length( '30' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'CREDAT' ).
* lcl_column->set_short_text( text-h05 ).
* lcl_column->set_medium_text( text-h05 ).
lcl_column->set_long_text( text-h05 ).
lcl_column->set_output_length( '13' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'CRETIM' ).
* lcl_column->set_short_text( text-h06 ).
* lcl_column->set_medium_text( text-h06 ).
lcl_column->set_long_text( text-h06 ).
lcl_column->set_output_length( '13' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
*/Set aggregations
* TRY.
* lcl_aggregations = lcl_table->get_aggregations( ).
* CATCH cx_salv_not_found. "#EC NO_HANDLER
* ENDTRY.
* TRY.
* lcl_aggregations->add_aggregation( '' ).
* CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
* ENDTRY.
*/Hide columns
* TRY.
* lcl_column ?= lcl_columns->get_column( 'DESCRIPT' ).
* lcl_column->set_visible( if_salv_c_bool_sap=>false ).
* CATCH cx_salv_not_found. "#EC NO_HANDLER
* ENDTRY.
*/Display top of page
CALL METHOD me->display_top_of_page.
lcl_table->set_top_of_list( lcl_content ).
*/Handle ALV events
lcl_events2 = lcl_table->get_event( ).
CREATE OBJECT lcl_handle_events.
SET HANDLER lcl_handle_events->on_link_click FOR lcl_events2.
lcl_display_settings = lcl_table->get_display_settings( ).
lcl_table->display( ).
ENDMETHOD. "display_data
* METHOD display_top_of_page
METHOD display_top_of_page.
CREATE OBJECT lcl_grid.
lv_title = text-t01.
lcl_grid->create_header_information(
row = 1
column = 1
text = lv_title
tooltip = lv_title ).
lcl_grid->add_row( ).
lcl_grid_1 = lcl_grid->create_grid(
row = 3
column = 1 ).
CLEAR lv_string.
CONCATENATE: sy-datum+4(2) '/' sy-datum+6(2) '/' sy-datum+0(4)
INTO lv_date1.
CONCATENATE: text-t02 lv_date1
INTO lv_string
SEPARATED BY space.
lcl_label = lcl_grid_1->create_label(
row = 1
column = 1
text = lv_string
tooltip = lv_string ).
CLEAR lv_string.
CONCATENATE: sy-uzeit+0(2) ':' sy-uzeit+2(2) ':' sy-uzeit+4(2)
INTO lv_time.
CONCATENATE: text-t03 lv_time
INTO lv_string
SEPARATED BY space.
lcl_label = lcl_grid_1->create_label(
row = 2
column = 1
text = lv_string
tooltip = lv_string ).
lcl_content = lcl_grid.
ENDMETHOD. "display_top_of_page
ENDCLASS. "lcl_alv_routines IMPLEMENTATION
* CLASS lcl_handle_events IMPLEMENTATION
CLASS lcl_handle_events IMPLEMENTATION.
* METHOD on_link_click
METHOD on_link_click.
ENDMETHOD. "on_link_click
ENDCLASS. "lcl_handle_events IMPLEMENTATION
* START-OF-SELECTION *
START-OF-SELECTION.
DATA: o_lcl_get_data TYPE REF TO lcl_get_data.
CREATE OBJECT o_lcl_get_data.
CALL METHOD o_lcl_get_data->get_idocs. -
Hi Experts ,
Could you suggest if we can use traffic lights in ALV tree Display and if possible program(T-code ) you have gone thorugh.
I already checked BCALV_TREE_06 , its totally different just showing icons .
Regards,
Karan
Edited by: Karan_Chowdary on Dec 24, 2011 7:28 AMFirst in your output table for ALV.. add the light coloum.
for example:
DATA: BEGIN OF IMARA OCCURS 0,
LIGHT(4) TYPE C,
MATNR TYPE MARA-MATNR,
MTART TYPE MARA-MTART,
MAKTX TYPE MAKT-MAKTX,
COLOR_LINE(4) TYPE C,
TCOLOR TYPE SLIS_T_SPECIALCOL_ALV, "cell
END OF IMARA.
Then in the get data section, you have to put if-else class and upate that column as follows
WRITE ICON_GREEN_LIGHT AS ICON TO IMARA-LIGHT.
The use that light column in the catalog section
Regards,
Venkat -
hi experts
i have itab having a field status and its data ( 'open' , 'complete')
pls explain the needed steps to be followed for setting the traffic light in ALV.
open --red light
complete -- green light.
pls, explain me the step by step procedure.
thanks in advance.
Regards
RajaramHi Raja,
Try this source coode and you can able to do it.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE'
i_callback_html_end_of_list = 'END_OF_LIST_HTML'
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
i_save = 'X'
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
*& Form end_of_list_html
output at the end of the list - not in printed output *
FORM end_of_list_html USING end TYPE REF TO cl_dd_document.
DATA: ls_text TYPE sdydo_text_element,
l_grid TYPE REF TO cl_gui_alv_grid,
f(14) TYPE c VALUE 'SET_ROW_HEIGHT'.
ls_text = 'Footer title'.
adds and icon (red triangle)
CALL METHOD end->add_icon
EXPORTING
sap_icon = 'ICON_MESSAGE_ERROR_SMALL'.
adds test (via variable)
CALL METHOD end->add_text
EXPORTING
text = ls_text
sap_emphasis = 'strong'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(bold)
CALL METHOD end->add_text
EXPORTING
text = 'Bold text'
sap_emphasis = 'strong'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(normal)
CALL METHOD end->add_text
EXPORTING
text = 'Normal text'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(bold)
CALL METHOD end->add_text
EXPORTING
text = 'Yellow triangle'
sap_emphasis = 'strong'.
adds and icon (yellow triangle)
CALL METHOD end->add_icon
EXPORTING
sap_icon = 'ICON_LED_YELLOW'.
display text(normal)
CALL METHOD end->add_text
EXPORTING
text = 'More text'.
*set height of this section
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = l_grid.
CALL METHOD l_grid->parent->parent->(f)
EXPORTING
id = 3
height = 14.
ENDFORM. "end_of_list_html.
Regards,
Ameer Baba. -
Traffic Signal Implementation in webdynpro View
Hi,
I want to implement the traffic Signal indicator for reporting status(RED, GREEN and YELLOW) in my webdynpro view.
Is there any UI element available for the same in webdynpro or any API to consume them ?
Any alternative suggestion would be helpful too.
Regards,
DebasishYou could use an Image and 3 icons, one for each traffic light.
Armin -
Hi All,
I have O/P of web-template when see in Portal for field Error Status as Background color Green for value 0 and Red for other numeric values which i did at query level by using exceptions. Web-Template (using WAD) giving me the same output which is fine.
Requirement1:
But rather then showing field Error status as background Color Green for value 0 and Red for other values. I want to display it in Traffic signal. I mean i want for Error status value 0 as traffic signal symbol green like OOO and for other values something like this OOO. I mean for Green third circle is filled with Green Color and for Red third Circle should be filled with Red color. Please let me know how can i achieve this..
Requirement2:
If requirement1 can not be fulfilled, All i want that for values 0 it should continue show Green color but it should not Its value that is 0 and if it is other than 0 it should only show color RED but no value 1 , 2 etc..
Thanks,
MandyHi Mandy,
Plz. follow the steps below:-
On your Analysis webitem property pane ->
Internal Display -> Modification -> choose Single Module
Alias -> specify any name here
Active -> On
Formats -> ALL
Type -> Generic Module
Generic Module -> Implementation Name -> com.sap.ip.bi.rig.ExceptionImage
Parameter List ->
Parameter 1 -> Name / Expression -> ALERT_GOOD, Value -> Image, Image -> select from MIME Repository (this is for the green traffic signal image corresponding to the green Error Status)
Parameter 2 -> Name / Expression -> ALERT_BAD, Value -> Image, Image -> select from MIME Repository (this is for the red traffic signal image corresponding to the red Error Status)
Note - I assume you have configured Good1 (green Error Status) & Bad1 (red Error Status) in your Query Designer Exception settings - if not plz. replace the Alert Level setting accordingly i.e. you can either use ALERT_GOOD, ALERT_CRITICAL, ALERT_BAD or any of the below ALERT_1 to ALERT_9 to indicate the Alert Levels.
ALERT_1 equates to Good 1
ALERT_2 equates to Good 2
ALERT_3 equates to Good 3
ALERT_4 equates to Critical 1
ALERT_5 equates to Critical 2
ALERT_6 equates to Critical 3
ALERT_7 equates to Bad 1
ALERT_8 equates to Bad 2
ALERT_9 equates to Bad 3
You need to configure one more property of the Analysis webitem inorder that the Image is displayed when the web template is run
Cell Content -> Exception Visualization -> choose SYMBOL here if you wish to show only the traffic signal image (i.e the cells are displayed without background color as configured in Query Designer, the module replaces the standard symbols with your own symbols)
--Priya -
Traffic lights in ALV list header
how do i display traffic lights as icons in ALV list header. for example, in the code below, i want to display a green icon at the end of closed items and a red icon at the end of the open items:
closed : 4 [green-icon]
open : 2 [red-icon]
CLEAR header_alv_wa-info.
header_alv_wa-key = 'closed:'.
header_alv_wa-info = gv_closed.
header_alv_wa-typ = 'S'.
APPEND header_alv_wa TO headeralv.
CLEAR header_alv_wa-info.
header_alv_wa-typ = 'S'.
header_alv_wa-key = 'open:'.
header_alv_wa-info = gv_open.
APPEND header_alv_wa TO headeralv.Hi,
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
the above links will give u the code for the same..
Regards,
Aparna -
ABAP OO: traffic lights in ALV
Hello,
Instead of going the easy way, I decided to practise a bit of ABAP OO (which I am still quite unfamiliar with), and do ALV list to my new report by using CL_SALV_TABLE class.
This seems to be quite clear if I just follow Rich's great instructions:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eac1fa0b-0e01-0010-0990-8530de4908a6
The only thing that is not so clear is that how can I add traffic (or led) lights to my ALV list when using class CL_SALV_TABLE. Does someone has an example?
Another bonus question: Do I always have to define the field catalog (with CL_SALV_TABLE) when using internal table of my own type?Hello
Have a look at the sample report
SALV_DEMO_TABLE_COLUMNS.Following is the in-line documentation of the report:
*& Report SALV_DEMO_TABLE_COLUMNS
report salv_demo_table_columns no standard page heading.
*... This report demonstrates the settings for the columns.
* The demonstration uses the new ALV API
* - cl_salv_table (Fullscreen Grid, Fullscreen List, Grid)
* - cl_salv_hierseq_table (hierseq. lists)
* If the table ALV_T_T2 is empty, please create data for the demo
* by running report BCALV_GENERATE_ALV_T_T2
* §1 select data into global output table
* §2 create ALV Table
* create instance of cl_salv_table for displaying a list of your
* output table
* §2.1 create a ALV List by setting the parameter LIST_DISPLAY of the
* constructor cl_salv_table to 'X'
* §2.2 create a ALV Fullscreen Grid by not setting the parameter
* LIST_DISPLAY of the constructor cl_salv_table to 'X'
* §2.3 create a Grid by creating a Dynpro with a container in it. In
* PBO check if the container has been instantiated. If the
* container has not yet been instantiated then this is the first
* call:
* (1) create the container
* (2) create an instance of cl_salv_table
* §3 Functions
* §3.1 activate ALV generic Functions
* §3.2 include own functions
* §4 Cell Types
* §4.1 Exception Column
* §4.2 Icon Column
* §4.3 Symbol Column
* §4.4 Checkbox Column
* §4.5 Hotspot Column
* §4.6 Button Column
* §4.7 Hyperlink Column
* §4.8 Dropdown Column
* §4.9 Tooltip Information for Exceptions, Icons and Symbols
* §5 Color
* §5.1 set the color of a complete column by calling the method
* set_color of cl_salv_column of the column
* §5.2 set the color of a complete row
* note: by setting the columnname information the same
* technique can be used for setting the color of cells
* (1) register the column in which the color information
* for the row is held
* (2) set the color information to the row in the output
* table
* note: do not fill the parameter FNAME for setting the
* color of the complete row
* fill the parameter FNAME for setting the color
* of a cell (Row and Column are definied)
* §6 Event Handler
* define a handler for the events of cl_salv_table
* §6.1 define a local class for handling events of cl_salv_table
* define methods for the events which are to be handled
* §6.2 implement the defined methods for handling the events of
* cl_salv_table
* §7 Events
* register to events of cl_salv_table
* §7.1 register to the event USER_COMMAND of cl_salv_table
* for receiving information when own functions has been selected
* §7.2 register to the event DOUBLE_CLICK of cl_salv table
* for receiving information when user has double clicked on a line
* §7.3 register to the event LINK_CLICK of cl_salv_table
* for receiving information when user has initiated a hotspot click
* §8 Display
* display the configurated ALV Table by calling the method
* display of cl_salv_table.
Regards
Uwe -
LED in field and traffic lights in ALV filter
Hi experts,
Am showing LED in field of ALV(OOPs oriented)and when i click on ALV filter for led field..it shows me Traffic lights in poup for filter.Please help me to get LED in filter popup also.
Thanks,
Sajay.Solved
-
How to print traffic lights in ALV reports
hi how to print traffic lights on selection screen in alv reports
HI,
check below code
TYPE-POOLS : icon.
types: BEGIN OF ty_display,
status TYPE icon-id,
bukrs TYPE bseg-bukrs,
gjahr TYPE bseg-gjahr,
monat TYPE monat,
work_order TYPE z_work_order,
glaccount TYPE saknr,
message TYPE string,
END OF ty_display.
data : it_display TYPE TABLE OF ty_display,
wa_display TYPE ty_display.
WRITE icon_led_green AS ICON TO wa_display-status.
wa_display-gjahr = p_year.
wa_display-bukrs = p_cc.
wa_display-monat = p_period.
wa_display-work_order = v_aufnr.
wa_display-glaccount = wa_bseg-hkont.
APPEND wa_display TO it_display.
WRITE icon_led_red AS ICON TO wa_display-status.
wa_display-gjahr = p_year.
wa_display-bukrs = p_cc.
wa_display-monat = p_period.
wa_display-work_order = v_aufnr.
wa_display-glaccount = wa_bseg-hkont.
wa_display-message = text-010.
APPEND wa_display TO it_display.
change the icon color based on your requirement and append it to the internal table which you have to display in ALV.
reward points if it is helpful.
Regards,
Srilatha -
Displaying traffic lights in alv grid report?
Hi everyone,
I have an alv grid report.I m using the FM reuse_alv_grod_display to display my alv report.I am passing the fieldcatalogue automatically.I m getting the output perfectly.Now i have to add traffic lights to that alv report.
Since i m passing the fieldcatalogue automatically i m confused to display the traffic lights?
any suggestions please?
Thank you.hi dp,
look at the program i made... se the bold part you will be able to impelment lights easily,
DECLARING TYPES POOL *
All the definitions of internal tables, structures and constants
are declared in a type-pool called SLIS.
type-pools: slis.
TABLES *
tables: vbak,vbap,kna1.
TYPES *
*&--defining types for TABLE VBAK
types: begin of t_vbak,
vbeln type vbeln_va, "sales document
kunnr type kunag,
erdat type erdat,
auart type auart,
netwr type netwr_ak,
waerk type waerk,
vkorg type vkorg,
vtweg type vtweg,
spart type spart,
name1 type name1_gp,
stras type stras_gp,
ort01 type ort01_gp,
pstlz type pstlz,
regio type regio,
land1 type land1_gp,
telf1 type telf1,
end of t_vbak.
*&--Defining types for TABLE VBAP
types: begin of t_vbap,
vbeln type vbeln_va,
posnr type posnr_va,
matnr type matnr,
maktx type maktx,
end of t_vbap.
*&--MERGED FINAL SALES TABLE
types: begin of t_sales_final,
vbeln type vbeln_va,
kunnr type kunag,
posnr type posnr_va,
erdat type erdat, "date of creation
auart type auart,
netwr type netwr_ak,
waerk type waerk,
vkorg type vkorg,
vtweg type vtweg,
spart type spart,
name1 type name1_gp,
v_lights type c,
stras type stras_gp,
ort01 type ort01_gp,
pstlz type pstlz,
regio type regio,
land1 type land1_gp,
telf1 type telf1,
matnr type matnr,
maktx type maktx,
end of t_sales_final.
defining wrokarea and IT.
WORK AREA DECLARATION *
*&---work area for Internal Tables
data: wa_vbak type t_vbak.
data: wa_vbap type t_vbap.
data: wa_sales_final type t_sales_final.
*&--work area for layout
data: wa_layout type slis_layout_alv.
INTERNAL TABLES DECLARATION *
*&---Internal tables without Header Line.
data : i_vbak type standard table of t_vbak,
i_vbap type standard table of t_vbap,
i_sales_final type standard table of t_sales_final.
*&---Internal table for field catalog
data : i_fieldcat type slis_t_fieldcat_alv,
*&---Internal table for the sorting sequence.
i_sortinfo type slis_t_sortinfo_alv,
*&---Internal table for the event catalog.
i_eventcat type slis_t_event,
*&---Internal table for the top of page event
i_listheader type slis_t_listheader.
VARIABLE DECLARATION *
data : v_progname like sy-repid, "Program name(system defined)
v_gridtitle type lvc_title. "Grid Title
INITIALIZATION EVENT *
initialization.
v_progname = sy-repid.
refresh:i_vbak,
i_vbap,
i_sales_final,
i_fieldcat,
i_sortinfo,
i_eventcat,
i_listheader.
clear: wa_vbak,
wa_vbap,
wa_sales_final,
wa_layout.
SELECTION SCREEN *
SCREEN FOR ENTERING INFORMATION
selection-screen begin of block b1 with frame title text-001.
select-options: r_vbeln for wa_vbak-vbeln obligatory.
select-options: r_erdat for wa_vbak-erdat obligatory.
selection-screen end of block b1 .
AT SELECTION SCREEN *
at selection-screen.
perform zf_validate_sales_doc_no.
perform zf_validate_date.
START OF SELECTION EVENT
start-of-selection.
perform zf_populate_header.
perform zf_populate_detail.
perform zf_append_sales_final.
END OF SELECTION EVENT
end-of-selection.
*If Internal Table Is Populated Then Only Display Alv Report.
if i_sales_final is not initial.
Prepare fieldcatalog .
perform zf_build_fieldcat using i_fieldcat.
MODIFY the records IN the internal TABLE for the traffic lights.
perform zf_modify_final.
build event catalogue
perform zf_eventcat using i_eventcat.
build sorting
perform zf_sorting using i_sortinfo.
&---Build Listheader for TOP OF PAGE EVENT.
perform zf_build_listheader using i_listheader.
&---Build layout.
perform zf_layout.
&---Initializating Grid Title
perform zf_build_grid_title.
&---Display alv grid.
perform zf_display_alv_grid.
else.
*If Table is not Populated ie Records Does not exist
message 'Record Does Not Exist' type 'S'.
endif.
*& Form zf_validate_sales_doc_no
text
--> p1 text
<-- p2 text
form zf_validate_sales_doc_no .
select single vbeln into wa_vbak-vbeln from vbak where vbeln in r_vbeln .
if sy-subrc <> 0.
message i101.
endif.
endform. " zf_validate_sales_doc_no
*& Form zf_validate_date
text
--> p1 text
<-- p2 text
form zf_validate_date .
if date is future
if r_erdat-low >= sy-datum.
message e102.
elseif r_erdat-high >= sy-datum.
message e103.
endif.
endform. " zf_validate_date
*& Form zf_populate_header
text
--> p1 text
<-- p2 text
form zf_populate_header .
select vbeln
kunnr
erdat
auart
netwr
waerk
vkorg
vtweg
spart
into table i_vbak from vbak where vbeln in r_vbeln.
if sy-subrc <> 0.
message 'RECORD DOES NOT EXIST' type 'E'.
endif.
sort i_vbak by vbeln.
*&--LOGIC TO GET FIELDS FROM TABLE KNA1 INTO INTERNAL TABLE I_VBAK
loop at i_vbak into wa_vbak.
select single name1 stras ort01 pstlz regio land1 telf1 into (wa_vbak-name1,
wa_vbak-stras,
wa_vbak-ort01,
wa_vbak-pstlz,
wa_vbak-regio,
wa_vbak-land1,
wa_vbak-telf1)
from kna1
where kunnr = wa_vbak-kunnr.
modifying it_header.
modify i_vbak from wa_vbak.
clear wa_vbak.
endloop.
endform. " zf_populate_header
*& Form zf_populate_detail
text
--> p1 text
<-- p2 text
form zf_populate_detail .
if i_vbak[] is not initial.
select vbeln
posnr
matnr
into table i_vbap from vbap
for all entries in i_vbak where vbeln = i_vbak-vbeln.
endif.
sort i_vbap by vbeln.
sort i_vbap by posnr.
*&--LOGIC TO GET FIELDS FROM TABLE MAKT INTO INTERNAL TABLE I_VBAP
loop at i_vbap into wa_vbap.
select single maktx into (wa_vbap-maktx)
from makt where matnr = wa_vbap-matnr and spras = sy-langu.
modifying it_header.
modify i_vbap from wa_vbap.
clear wa_vbap.
endloop.
endform. " zf_populate_detail
*& Form zf_append_sales_final
text
--> p1 text
<-- p2 text
form zf_append_sales_final .
sort i_vbak by vbeln.
sort i_vbap by vbeln posnr.
loop at i_vbak into wa_vbak.
move-corresponding wa_vbak to wa_sales_final.
read table i_vbap with key vbeln = wa_vbak-vbeln
binary search transporting no fields.
loop at i_vbap into wa_vbap from sy-tabix.
if wa_vbap-vbeln <> wa_vbak-vbeln.
exit.
endif.
move-corresponding wa_vbap to wa_sales_final.
append wa_sales_final to i_sales_final.
endloop.
endloop.
endform. " zf_append_sales_final
*& Form zf_build_fieldcat
text
-->P_I_FIELDCAT text
form zf_build_fieldcat using p_i_fieldcat type slis_t_fieldcat_alv.
data: l_fieldcat type slis_fieldcat_alv. "local Workarea used
clear l_fieldcat.
FOR LIGHT IN COLUMN
clear l_fieldcat.
l_fieldcat-col_pos = '1'. " POSITION OF THE COLUMN.
l_fieldcat-fieldname = 'V_LIGHTS'.
" FIELD FOR WHICH CATALOG ID FILLED.
*We are passing final internal table 'I_FINAL' to l_fieldcat(local
*variable
l_fieldcat-tabname = 'I_SALES_FINAL'.
" INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
l_fieldcat-just = 'C'. " FOR JUSTIFICATION.
l_fieldcat-outputlen = 20.
" TO DEFINE OUTPUT LENGTH OF THE COLUMN.
append l_fieldcat to p_i_fieldcat.
FIRST COLUMN ********************************
l_fieldcat-col_pos = '2'. " POSITION OF THE COLUMN
l_fieldcat-fieldname = 'VBELN'. " FIELD FOR WHICH CATALOG ID FILLED
l_fieldcat-tabname = 'I_SALES_FINAL'. " INTERNAL TABLE BELONGS TO
l_fieldcat-key = 'X'. " SO THAT this field is not scrollable hiddable.
l_fieldcat-just = 'L'. " FOR JUSTIFICATION
*l_fieldcat-hotspot = 'X'. " MARK THIS field as hotsopt
l_fieldcat-lzero = 'X'. " OUTPUT WITH leading zeros.
l_fieldcat-seltext_l = 'Sales Document'. " long text for header.
l_fieldcat-seltext_m = 'Sales Doc'. " medium text for header.
l_fieldcat-seltext_s = 'Sales Doc'. " sort text for header.
l_fieldcat-outputlen = 20. " SET THE output length.
l_fieldcat-ref_tabname = 'VBAK'. " FOR F1 & F4 help as
append l_fieldcat to p_i_fieldcat.
clear l_fieldcat.
**************************SECOND COLUMN ********************************
*l_fieldcat-col_pos = '3'. " POSITION OF THE COLUMN
l_fieldcat-row_pos = '2'. " POSITION OF THE COLUMN
l_fieldcat-fieldname = 'POSNR'. " FIELD FOR WHICH CATALOG ID FILLED
l_fieldcat-tabname = 'I_SALES_FINAL'. " INTERNAL TABLE BELONGS TO
l_fieldcat-key = 'X'. " SO THAT this field is not scrollable hiddable.
l_fieldcat-just = 'L'. " FOR JUSTIFICATION
l_fieldcat-hotspot = 'X'. " MARK THIS field as hotsopt
l_fieldcat-lzero = 'x'. " OUTPUT WITH leading zeros.
l_fieldcat-seltext_l = 'Sales Document Item'. " long text for header.
l_fieldcat-seltext_m = 'Sales Document Item'. " medium text for header.
l_fieldcat-seltext_s = 'Sales Document Item'. " sort text for header.
l_fieldcat-outputlen = 20. " SET THE output length.
l_fieldcat-ref_tabname = 'VBAP'. " FOR F1 & F4 help as
append l_fieldcat to p_i_fieldcat.
clear l_fieldcat.
endform. " zf_build_fieldcat
*& Form zf_eventcat
text
-->P_I_EVENTCAT text
form zf_eventcat using p_i_eventcat type slis_t_event.
data: l_eventcat type slis_alv_event.
clear l_eventcat.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = p_i_eventcat
exceptions
list_type_wrong = 1
others = 2
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
TOP OF PAGE FORM
clear l_eventcat.
read table p_i_eventcat into l_eventcat with key
name = slis_ev_top_of_page.
"(COMPONENT "NAME"of structure)
if sy-subrc = 0. "if success
move 'ZF_TOP_OF_PAGE' to l_eventcat-form.
"matches name and moves form to workarea and modifies table
modify p_i_eventcat from l_eventcat index sy-tabix
transporting form.
endif.
PF_STATUS_SET FORM
clear l_eventcat.
read table p_i_eventcat into l_eventcat with key
name = slis_ev_pf_status_set.
if sy-subrc = 0.
move 'ZF_PF_STATUS_SET' to l_eventcat-form.
modify p_i_eventcat from l_eventcat index sy-tabix
transporting form.
endif.
USER_COMMAND FORM
clear l_eventcat.
read table p_i_eventcat into l_eventcat with key
name = slis_ev_user_command.
if sy-subrc = 0.
move 'ZF_USER_COMMAND' to l_eventcat-form.
modify p_i_eventcat from l_eventcat index sy-tabix
transporting form.
endif.
endform. " zf_eventcat
*& Form zf_sorting
text
-->P_I_SORTINFO text
form zf_sorting using p_i_sortinfo.
endform. " zf_sorting
*& Form zf_build_listheader
text
-->P_I_LISTHEADER text
form zf_build_listheader using p_i_listheader type slis_t_listheader.
data: l_listheader type slis_listheader.
refresh p_i_listheader.
clear l_listheader.
HEADER
l_listheader-typ = 'H'.
l_listheader-info = 'FUJITSU CONSULTING INDIA LTD.'.
append l_listheader to p_i_listheader.
SELECTION
l_listheader-typ = 'S'.
l_listheader-key = 'Date:'.
l_listheader-info = sy-datum.
append l_listheader to p_i_listheader.
ACTION
l_listheader-typ = 'A'.
*l_listheader-key =
l_listheader-info = 'SALES ORDER ALV REPORT By Rohan Malik'.
append l_listheader to p_i_listheader.
endform. " zf_build_listheader
*& Form zf_build_grid_title
text
--> p1 text
<-- p2 text
form zf_build_grid_title .
v_gridtitle = 'List of Purchase Order'.
endform. " zf_build_grid_title
*& Form zf_display_alv_grid
text
--> p1 text
<-- p2 text
form zf_display_alv_grid .
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = v_progname
i_grid_title = v_gridtitle
is_layout = wa_layout
it_fieldcat = i_fieldcat
it_sort = i_sortinfo
it_events = i_eventcat
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = i_sales_final
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " zf_display_alv_grid
*& Form zf_top_of_page
text
--> p1 text
<-- p2 text
form zf_top_of_page .
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = i_listheader
i_logo = 'ENJOYSAP_LOGO'
I_END_OF_LIST_GRID =
endform. " zf_top_of_page
*& Form zf_user_command
text
--> p1 text
<-- p2 text
form zf_user_command using r_ucomm like sy-ucomm
rs_selfield type slis_selfield .
case r_ucomm. "FCODE
when 'VA03'.
read table i_sales_final into wa_sales_final index rs_selfield-tabindex.
set parameter id 'AUN' field rs_selfield-value.
call transaction 'VA03' and skip first screen .
message i102 with rs_selfield-value .
when '&IC1'. "for hotspot with VBELN, POSNR, MATNR, KUNNR.
if rs_selfield-fieldname = 'MATNR'.
set parameter id 'MAT' field rs_selfield-value.
call transaction 'MM03' and skip first screen.
return.
message i103 with rs_selfield-value .
endif.
if rs_selfield-fieldname = 'VBELN'.
set parameter id 'AUN' field rs_selfield-value.
call transaction 'VA03' and skip first screen.
return.
message i104 with rs_selfield-value .
endif.
endcase.
endform. " zf_user_command
*& Form ZF_PF_STATUS_SET
text
--> p1 text
<-- p2 text
form zf_pf_status_set using rt_extab type slis_t_extab.
set pf-status 'Z11_RM_ALV_SO'.
endform. " ZF_PF_STATUS_SET
*& Form zf_layout
text
--> p1 text
<-- p2 text
form zf_layout .
wa_layout-zebra = 'X'.
wa_layout-lights_fieldname = 'V_LIGHTS'.
wa_layout-lights_tabname = 'I_SALES_FINAL'.
" 1, 2 or 3 for red, yellow and green respectively.
endform. " zf_layout
*& Form zf_modify_final
text
--> p1 text
<-- p2 text
form zf_modify_final .
CODE TO EXECUTE LIGHTS
*start of loop
loop at i_sales_final into wa_sales_final.
*giving conditions and modifying as we want to change many rows
if wa_sales_final-netwr <= 10000.
wa_sales_final-v_lights = '1'.
modify i_sales_final from wa_sales_final transporting v_lights.
elseif wa_sales_final-netwr > 10000 and wa_sales_final-netwr <= 100000.
wa_sales_final-v_lights = '2'. " Exception.
modify i_sales_final from wa_sales_final transporting v_lights.
else.
wa_sales_final-v_lights = '3'. " Exception.
modify i_sales_final from wa_sales_final transporting v_lights.
endif.
endloop.
reward point s if helpful
rohan malik -
Multiple traffic lights in ALV
Hi friends,
is it possible to have more than one traffic lights colomn in ALV OO ?
i displayed the first one, but i need to display 3 traffic lights in 3 different colomns in my ALV (wich has 10 columns)
Thanks in advance,
SoufianeCopy this and paste in your test program. execute it and see
REPORT ysam_test5 MESSAGE-ID zsummit.
TYPE-POOLS: icon.
DATA: marc TYPE marc.
TYPES: BEGIN OF t_marc,
matnr TYPE matnr,
werks TYPE werks_d,
mmsta TYPE mmsta,
maabc TYPE maabc,
action(4) TYPE c,
action1(4) type c,
action2(4) type c,
END OF t_marc.
DATA: it_marc TYPE TABLE OF t_marc,
wa_marc TYPE t_marc.
FIELD-SYMBOLS: .
DATA: w_recipient TYPE swc_object,
w_recipient_obj TYPE swotobjid.
*container macro
swc_container w_swc_container.
*batch job information
INCLUDE lbtchdef.
DATA: w_job TYPE tbtcjob.
*constants
CONSTANTS: c_on VALUE 'X',
c_off VALUE space,
c_int(11) VALUE ' 0123456789'.
Objects for handling the events
CLASS lcl_handle_events DEFINITION DEFERRED.
DATA: w_events_grid TYPE REF TO lcl_handle_events.
CLASS lcl_handle_events DEFINITION
CLASS lcl_handle_events DEFINITION.
PUBLIC SECTION.
METHODS:
on_link_click FOR EVENT link_click OF cl_salv_events_table
IMPORTING row column.
ENDCLASS. "lcl_handle_events DEFINITION
CLASS lcl_handle_events IMPLEMENTATION
CLASS lcl_handle_events IMPLEMENTATION.
METHOD on_link_click.
IF column = 'ACTION'.
READ TABLE it_marc ASSIGNING refresh.
ENDIF.
ENDMETHOD. "on_single_click
ENDCLASS. "lcl_handle_events IMPLEMENTATION
SELECTION-SCREEN BEGIN OF BLOCK main WITH FRAME.
SELECT-OPTIONS: s_matnr FOR marc-matnr,
s_werks FOR marc-werks.
SELECTION-SCREEN BEGIN OF BLOCK back WITH FRAME TITLE text-ss2.
PARAMETERS: p_fore RADIOBUTTON GROUP proc DEFAULT 'X', "foreground
p_ball RADIOBUTTON GROUP proc,
p_berr RADIOBUTTON GROUP proc.
SELECTION-SCREEN END OF BLOCK back.
SELECTION-SCREEN BEGIN OF BLOCK mail WITH FRAME TITLE text-ss3.
PARAMETERS: p_print RADIOBUTTON GROUP mail DEFAULT 'X',
p_email RADIOBUTTON GROUP mail.
SELECTION-SCREEN END OF BLOCK mail.
SELECTION-SCREEN END OF BLOCK main.
START-OF-SELECTION.
PERFORM select_data.
END-OF-SELECTION.
PERFORM salv_grid.
*& Form salv_grid
text
FORM salv_grid .
DATA: lref TYPE REF TO cx_root .
DATA: lr_layout TYPE REF TO cl_salv_layout,
ls_key TYPE salv_s_layout_key.
Icon
DATA: l_columns TYPE REF TO cl_salv_columns,
l_column TYPE REF TO cl_salv_column_table.
DATA: l_icon TYPE REF TO cl_salv_column_list.
TRY.
cl_salv_table=>factory(
IMPORTING
r_salv_table = gr_table
CHANGING
t_table = it_marc ).
CATCH cx_salv_msg INTO lref.
ENDTRY.
***Sub Total
PERFORM sub_total.
***Layout
lr_layout = gr_table->get_layout( ).
ls_key-report = sy-cprog.
lr_layout->set_key( ls_key ).
lr_layout->set_default( 'X' ).
lr_layout->set_save_restriction( if_salv_c_layout=>restrict_none ).
***toolbar
gr_functions = gr_table->get_functions( ).
gr_functions->set_all( 'X' ).
icon
l_columns = gr_table->get_columns( ).
TRY.
l_column ?= l_columns->get_column( 'ACTION' ).
l_column->set_short_text( 'Execute' ).
l_column->set_icon( IF_SALV_C_BOOL_SAP=>FALSE ).
CATCH cx_salv_not_found.
ENDTRY.
TRY.
l_column ?= l_columns->get_column( 'ACTION' ).
l_column->set_icon( if_salv_c_bool_sap=>true ).
CATCH cx_salv_not_found.
ENDTRY.
TRY.
l_column ?= l_columns->get_column( 'ACTION' ).
l_column->set_cell_type( if_salv_c_cell_type=>hotspot ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
*... §6.5 register to the event LINK_CLICK
DATA: lr_events TYPE REF TO cl_salv_events_table.
lr_events = gr_table->get_event( ).
CREATE OBJECT w_events_grid.
SET HANDLER w_events_grid->on_link_click FOR lr_events.
*final display
gr_table->display( ).
ENDFORM. " salv
*& Form sub_total
FORM sub_total .
DATA: lr_aggregations TYPE REF TO cl_salv_aggregations.
lr_aggregations = gr_table->get_aggregations( ).
lr_aggregations->clear( ).
TRY.
lr_aggregations->add_aggregation( columnname = 'Z_BALANCE_REM' ).
CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing.
ENDTRY.
TRY.
lr_aggregations->add_aggregation( columnname = 'Z_PAY_AMT' ).
CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing.
ENDTRY.
ENDFORM. " sub_total
*& Form select_data
FORM select_data .
SELECT matnr werks mmsta maabc
INTO CORRESPONDING FIELDS OF TABLE it_marc
FROM marc
WHERE matnr IN s_matnr
AND werks IN s_werks.
IF sy-subrc = 0.
LOOP AT it_marc ASSIGNING -action = icon_execute_object.
ENDLOOP.
ENDIF.
ENDFORM. " select_data
enter material number and press execute icon - just come back from mm02 and it will display three lights.
Maybe you are looking for
-
Sql statement to get the count of items in a group.
i have a table as follows group id items 1 item1 1 item2 1 item3 2 item4 2 item5 i need to get the count of items for each group the out put should be like group = 1 count = 3 g
-
Help find the Driver CREATIVE LABS CT4810 chipset ES1373 for Win 2000. E-mail dirpt@mail.
Help find the Driver CREATIVE LABS CT480 chipset ES373 for Win 2000. E-mail [email][email protected]][email protected][/url].
-
[solved] Eclipse looks ugly. Any way to change the theme?
I am using KDE, with the oxygen-gtk theme for gtk. Most applications look pretty good for my taste. But then eclipse... ...it looks... bad... I want a different theme for eclipse, and keep other applications on default, though I'm not sure if I need
-
If I download a tv show to my iPad can I watch it when I am on an airplane? Is there a time limit on how long I have to watch the tv shows if I down load a complete season?
-
Unary oparators and data aggregations
hi eb Do heirarchies with unary oparators get data aggregtions the same way regular heirarchies do - or their members are aggragated on the fly only? TIA Rea