Trailer page with sheetcounts

Hi,
We run documaker on the mainframe. We have around 100 output files created which we call destinations. Gendata outputs the input file (one file) to multiple output files based on the conditions given in the FSISYS.ini file.
As our input file to documaker is huge, we had issues with Documaker not able to process the whole file at a time so we had to split the input file into 20 files and we are running 20 instances of Documaker in parallel. So each instance of documaker produces 100 output files. At the end all 20 output files of each destination are concatnated and print files (1 per each destination) are generated.
We have only a banner page till now for the print files, now we are working on to create a trailer page as well which should have the total sheet count. It is very easy to do if we are not running these many instances of documaker. The following code in FSISYS will take of it
BatchBannerEndForm = ;BANNER;BATCH;BATCHTRAILER;
Now we ran out of ideas of how to capture the sheetcount from the output file of each instance of documaker. Can some one please suggest a way for this. May be there is way to capture these counts in some file from which the counts can be extracted at the end.
Thank you very much in advance

At first glance you have two possibilities:
1) Use a newer version of Documaker that supports file sizes greater than 2GB; on mainframe this means VSAM KSDS filesets. This way you can alleviate the multiple processes; however I suspect that for your situation this is probably not feasible since you appear to have a definite processing window and splitting the files in this manner allows you to complete your processing within this time. So...
2) The other option would be to output the total sheet count from each run into a file using a DAL script, and then your BATCHTRAILER page can have a DAL script that will read the file(s) to obtain the count(s) and format (add) them for display. You'll want to take a look at the PutINIString and DBWrite DAL functions. Keep in mind the DB functions will require you to create a DFD that defines your output file.
Hope this steers you in the right direction!

Similar Messages

How to suppress printing of pages with no data

Dear all,
My report consists of 3 distinct sub reports. The first two sub reports should be printed as portrait on A-4 sheet while the third one should be printed as landscape A-4 . I have put the first two sub reports layout in the main section with orientation as portrait while the third one is placed in trailer section with orientation as landscape. The printing of subreports 2 and 3 is conditional. There may be case when first two sub reports get printed while we do not have third report as there is no data in the database for the same. In this case , I am still getting a blank page corresponding to the third sub report in the final report. How do I suppress this?
Regards,
Ranjit
P.S. I am using Reports 6i

maybe, you don't understand me.
I have below jtable:
============================
I column1 name l column2 name I
============================
l data l data l
============================
l data l data l
============================
XXX
============================
I wrote:
table.setBackground(Color.black) then only data area has black colour, but XXX area hasn't black colour.
How to XXX area also has black colour?
help me, thanks very much.

How do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA certfificate i can't open web pages with this, how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC CA certfificate i can't open web pages with this

how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA ?

Hi
I am not suprised no one answered your questions, there are simply to many of them. Can I suggest you read the faq on 'how to get help quickly at - http://forums.adobe.com/thread/470404.
Especially the section Don't which says -
DON'T
Don't post a series of questions in a single post. Splitting them into separate threads increases your chances of a quick answer.
PZ
www.pziecina.com

How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps!

A tree-view in HTML page with nodes generated with java script in run time is not visible in the UI Automation Tree. Need Help

I have a HTML page with an IFrame. Inside the Iframe there is a table with a tree view
<iframe>
<table>
<tr>
<td>
<treeview id="tv1"></treeview>
</td>
</tr>
</table>
</iframe>
In UIA, i am able to traverse till the tree view but not able to see it.
I have used the TreeWalker.RawViewWalker Field to traverse the node from the desktop Automation.RootElement.
I tried to use AutomationElement.FromPoint method to check whether i am able to get that element. Fortunately i was able to get the automation element.
i tried to get the path to root element from the node element using the TreeWalker.RawViewWalker. I was able to get the parent path to the root element.
But trying the reverse way like navigating from root element to tree node, was not getting the element for me.
Please help me with suggestions or inputs to resolve this issue.

Thanks Bernard,
It works fine with JInitiator but not working with
the JPI. For JPI what settings I need to do ??hi TKARIM and Bernard, i am having similar problem even with the Bernard's recommended setup. could you post the webutiljini.htm (i presume you are using config=test) ?
i am actually using jinitiator 1.3.1.28 with Oracle HTTP Server of OAS 10gR2) calling Forms Server 6i (f60cgi). After setting up according to Bernard's recommended setup steps, the java console showed that it loaded the icon jar file when it could not read the form, but it skipped the loading of the icon jar file once it read and started the form. How do we specify in the form to pick up the icon from the jar file instead from a directory ? Or do we need to specify ? Any ideas ?
Thx and Regards
dkklau

Get error while invoking a page with "create"

I get this error while invoking a page with "create". Also please any one tell me where is the log file is place to see the full story.
]] Root cause of ServletException.
javax.el.PropertyNotFoundException: Target Unreachable, 'Comments' returned null
     at com.sun.el.parser.AstValue.getTarget(AstValue.java:88)
     at com.sun.el.parser.AstValue.isReadOnly(AstValue.java:126)
     at com.sun.el.ValueExpressionImpl.isReadOnly(ValueExpressionImpl.java:230)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.getReadOnly(EditableValueRenderer.java:400)
     at oracle.adfinternal.view.faces.renderkit.rich.FormElementRenderer.renderAsElement(FormElementRenderer.java:199)
     Truncated. see log file for complete stacktrace
If i use a "create button then it does not throw error.
Please help.

When you are invoking your page, does your view object has an empty row where data can go and presist?
Create a an empty row in your view object(vo.createRow()) , or use create operation from data control palette.
You can set the log in Tools->Preferences-->Environment-->Log.
Regards,
Vikram

Sorry, something went wrong - Open Office File from Search Results Page with Office Web Apps

Hi,
I'm getting "Sorry, something went wrong" error when I'm trying to open any office document from inside Search Results Page with Office Web Apps, the same error is appearing in the document preview as well.
The error in SharePoint logs says that the file cannot be found.
Please note that this error is coming only when the "Filename" of the document is not written in English (in my case its written with Arabic characters).
If I try to open it from the document library, its opening properly with no errors.
The only difference between two URLs (document URL in Search Results and in Document Library) is the value for "sourcedoc" attribute;
In the case of Search Results page, the filename in "sourcedoc" attribute is kept as is with Arabic characters.
While in the Document Library, the filename in "sourcedoc" attribute is converted into different characters (something like: "B9%D9%85%D9%8").
Anybody have an idea on how to overcome this issue, implement a workaround or modify the "sourcedoc" behavior?
Thanks in Advance.
Hamza AlSughier

Dear Wendy,
Thanks for your efforts, I already tried your last suggestion before, but this didn't solve my problem.
Actually my end users are accessing this portal using ADFS and HTTPS.
Finally I got this solved, I have done below to get my overall solution working perfectly:
- First I have configured Windows Authentication and ADFS Authentication on the same zone which is the default zone.
- The issue when opening office documents with Arabic file name has disappeared as a result of first change.
- Then I have faced an issue where we are not able to crawl content under Default zone, however we have to do so, after too many efforts, I found that its related to the Load-balancer/proxy, I have made the crawler server
to crawl himself (http://CrawlServerName:PortNumber).
- Also a change on Alternate Access Mapping was needed, I have set one of the extended zones (which is running Windows Authentication only) as Internal URL for the Default Zone, and this is was the URL I used for Crawling.
I have configured Server Name Mappings to make sure we got proper URLs in Search Results.
- Then we faced another issue, which is Authentication selection on login page (How to bypass this page, and authenticate using ADFS auto), I used this solution (Set Custom Sign In Page):
http://0ut0ftheb0x.wordpress.com/2014/01/04/skip-the-authentication-selection-page-at-_logindefault-aspx-in-a-mixed-authentication-environment/.
- I faced one more issue as a result of above workaround; Sign Out functionality wasn't working well; users get logged in automatically whenever I click on Sign Out. I solved this by modifying the "Sign Out" Control under _layouts;
I made it to redirect users to ADFS Sign Out Page instead of SharePoint Sign Out Page (I know its not recommended, but I don't have any other option).
Hamza AlSughier

FIREFOX 26 changed the 'post crash' page with the list of windows and pages. It was a real HTML page with links for each page. Now it isn't (and blows)

* You changed the page that comes up after a crash - the one which shows the windows and pages that were up before the
crash.
This used to be a real HTML page and it isn't any more. THis choice was pure isiocy consider how peopel used that page every day (try taking to your users for a change).
The pages listed on that 'post crash page' used to be actual LINKS (you could right click them &
manually open them in another tab - and most peope DID that every day). You could also (and I did this a lot) drag a second
copy of the page, into a new tab (to keep track of all the pages I had not wanted to open)
Now the pages are no longer links. You cannot right-click them.
The thing in the probser is no longer a page that I can drag into a new tab.
Roll the version back and throw this one in the bin...and have a good long talk with your developers about the definition of
'STUPIDITIY'
Then I try to type anything in the addres bar it is suppose to repoond with the history of old things I have types in the past, or
search for what I type (and in some cases I think it tyes to convert it intoa URL). However it no longer does any of these
things. When I type in the ADDRESS BAR ONLY, I do not get all of my letters to appear. I have to type into a notepad or
into the search and to copy and paste to go to a URL. Nothing that is typed into the address bad responds normally at all
anymore, and I am fairly certain there are no new addons on this machine at all. It does not matter which things I disable. It
still does this. W of course points the finger back at a change to FIREFOX. I wich I could just sitct with one stable release
forever but the MOZILLA folk thing it is best to force peopel awy from a working broswer release to a horrible one (due to it
being out of date).
FIREFOX 26.0 has 'issues' (ie new *features*/bugs)
1) History is no longer accurate. My Proof? This machine is the primary one for the entire family (the only PC working). It is
logged in with same user every time and never has its history cleared. It now January 7 so I ought to have a list of all of last
months browing available to me.
However, according to FIREFOX history, in all of December 2013, the entire family only went to 51 primary URL's. None of
the official TV sites I use to get episodes are listed. None of the official movie sites I use are listed. The primary URL for
ebay is not listed. Only 1 out of our 4 weather sites that I use (at least once a week) are listed. Only 1 of our 3 FINANCE
sites is listed. There ought to be several; hundred root URLs listed.
Please fix history as this change seriously "blows greasy chunks"
PROBLEM (a stupid change in the new FIREFOX version)
FOr a long time, after a crash you got a useful page (a real HTML page) which gave you a list of all of your last sessions
'winwos and tabs' that were open when the browser crashed. there were certain ways of using this page that are no longer
able to be done.
The old method was wonderful as it had this behavior :
*** The old method for displaying your 'Recovered Tabs' allowed you to :
a) right click an individual item and open it in a tab without getting rid of that lovely window of your previous session of
'recovered windows and tabs '.
2) drag the URL for the entire window of 'recovered windows and tabs ' to a new tab (to make a second copy) so that you
could select just a few of them to open as a group, and stil have the old list handy.
You can no longer do either of these things. The 'recovered windows and tabs ' page no longer has links in it and can no longer be dragged, so you cant select a few of them to use, and keep the rest around for later. NOW - once you choose which pages to open the window is gone forever (can can't get a second copy).
People used to make a copy of the page for later use (with a drag)
we also used to open pages with a right click (which no longer functions
This new method seriously blows big greasy chunks. A parge loss in function has occurred.
Put things back as they were. 26 is full of terrible changes that NOBODY likes. It also has a lot of bugs (history is not reliable at all)

(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

Test jsp pages with ant

Hello!
I built up a web site and I want to test them using ANT. It works fine with other web page, however it doesn't work with web pages with "session" statement. For example in login.jsp I have the following statement
session.setAttribute("user", request.getParameter("userName"));
And if the user's name and password are correct, the user is directed to home.jsp, where i have the following statement to retrieve the user's name:
String id=session.getAttribute("user").toString();
In order to test the above 2 pages with ANT, I have the following code in builder.xml:
<?xml version='1.0'?>
<project name="proj" default="test" basedir=".">
<target name="test">
<get src="http://path/login.jsp?userName=id&passWord=1111" dest="1.html" />
</target>
</project>
When I run the script, I get the error that the home.jsp cannot be opened (see below)
[get] Error opening connection java.io.IOException: Server returned HTTP response code: 500 for URL: http://path/home.jsp
I am pretty sure the above error is caused by the "session" statement, because if I remove the statement in home.jsp, the page can be correctly opened. But I really need the "session" statement, Can someone tell me how to deal with it?
thanks a million.

One mistake i find in your code is while retreiving the session value its session.getAttribute("userName"), as you stored the value using the parameter 'userName'. Is it not causing problem. Please check...

How do I get the startup page with tabs like "tools" etc.?

== Issue
==
I have another kind of problem with Firefox
== Description
==
I have re-installed Firefox but how can I get a normal startup page with a normal toolbar (tabs like "Tools", slot for writing web address etc.)?
== Firefox version
==
3.6.6
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; sv-SE; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6 ( .NET CLR 3.5.30729)
== Plugins installed
==
*-np-mswmp
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*Adobe PDF Plug-In For Firefox and Netscape "9.3.3"
*Default Plug-in
*Shockwave Flash 10.0 r45
*iTunes Detector Plug-in
*CANON iMAGE GATEWAY Album Plugin Utility Module
*Picasa plugin
*4.0.50524.0
*Office Live Update v1.5
*Virtual Earth 3D 4.00090316005 plugin for Mozilla
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Nexus Personal Plug-Ins
*Voddler Web Plugin
*Next Generation Java Plug-in 1.6.0_18 for Mozilla browsers

In Firefox 3.6 and later on Windows you can hide the menu bar via "View > Toolbars" or via the right click context menu on a toolbar.
Press F10 or press and hold the Alt key down to bring up the menu bar temporarily.
Go to "View > Toolbars" or right-click the menu bar or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also [[Menu bar is missing]] and http://kb.mozillazine.org/Toolbar_customization

How do I access the iTunes Preview page with a web browser?

Does anyone out there know how to access the iTunes app preview page with a web browser? So far the only way I've been able to get there is by Googling the app with the term 'iTunes preview'. Is that really the only way? The iTunes page itself has no obvious link to the app list.
Thanks.

Thanks, but I should have been more specific. I was trying to access the iTunes app preview page on my PC through Chrome. While I have an iPad, it's not convenient to have to refer to it every time I want to discuss an iOS app.

Extract PDF pages with it's actual page numbers...

Hi scripting gurus,
We have more than 40 of PDF documents each document contain multiple pages. Using Acrobat Professional 7.0 and 8.0 with MAC platform. We have the script to extract the pages and to suffix running numbers with the document name, please find the script below. For example CH01.pdf document total number of pages is 10, but the actual page number starts with 11. So We have to extract each pages as individual documents and the page number will followed by document name with "_" separation, (Eg: CH01_11.pdf). I have tried so many ways to include the page numbers with the document name but i can't.
/*Split pdf pages with pNum suffixed*/
var rename = /.*\/|\.pdf$/ig;
var startName = this.path.replace(rename,"");
for (var i = 1, j = 0; j < numPages; i += 1, j += 1) {
extractPages ({
nStart : j,
nEnd : j == numPages - 1 ? j : j + 0,
cPath : "/Macintosh HD/Users/Beaconpmg/Desktop/ExtractFolder/"+startName+"_"+i+".pdf"
So please can anyone look into this and help for me.
Thanks in advance.
Regards
Thiyagu

try67
First of all, replace numPages with this.numPages
Also, this doesn't make any sense:
nEnd : i == numPages - 1
I have tried what you have said above, but it is not working. Its showing the same error (missing ; before statement)in 4th line of the script.
Please find the complete code below;
// see if we need to define a global offset first file
if(global.fPageOffset == undefined) {
var global.fPageOffset = 10; // start at 10
/*Split pdf pages with pNum suffixed*/
var rename = /.*\/|\.pdf$/ig;
var startName = this.path.replace(rename,"");
for (var i = 0; i < this.numPages; i++) { this.extractPages ({ nStart : i, nEnd : i == this.numPages - 1 , cPath : "/Macintosh HD/Users/Beaconpmg/Desktop/ExtractFolder/" + startName + "_" + (i + global.PageOffset) + ".pdf" }); }
// add finished file's number of pages to global page offest
global.fPageOffest += this.numPages;
Regards
Thiyagu

My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working.

My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.

Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G.

No scrolling when viewing man pages with Gnome terminal?

Hi all,
I have just installed Oracle Solaris 11 on x86. For a long time I've used Solaris 9 on SPARC. I like the new OS, but I'm having a problem viewing man pages with Gnome terminal. When I view a long man page, e.g., "man newfs", I don't get a functional scroll bar on the right hand side of the window. And although the space bar works to advance the page, when I reach the end, it doesn't return to the command prompt. It just beeps, prints "END", and I can only exit by closing the window. Can anyone tell me how to fix this? Suggestions would be much appreciated.
Many thanks,
Chris Tidy

It does sound like you're using "less" instead of more. When you see the "(END)" prompt you can simply type "q" and it will exit back to the command line prompt making it unnecessary to close the window. See the "less" manual page for more detail on the less command. Under Solaris 9 the paging was done with the "more" command. If you set the PAGER environment variiable to "more" the man page will use more and revert to the behavior you'd be used to with Solaris 9. Less erases the text you've already read when you type that final "q" which is a behavior I don't like. I didn't bother to determine if there is a way to fix that with less, I just went back to more. The choice between "more" and "less" is a personal preference.

Firefox becomes really slow then eventually unresponsive when loading a page with many hires images. Unsual high memory usage up to 2gigs just for firefox. Was never a problem with v3.6.

When loading a page with many hires images, Firefox becomes really slow and scrolling becomes jumpy then eventually becomes completely unresponsive. Unusual high memory usage of up to 2gigs just for firefox when loading these pages. This was never a problem with v3.6.

I encountered the same type of problem. Firefox running terribly slowly and slowing down my entire machine (Core i5 with 256GB SSD). Searching the forums, I found a couple of things about troubleshooting performance issues, one of which was to use '''hardware acceleration''', that is on by default. It was turned on on my PC, '''so I tried deactivating it, and it worked!'''
So doing the exact opposite as Mozilla support said solved the problem. It is really a pain now to work with Firefox. I'm using it because I have no choice, but I'd recommend IE and Chrome over Firefox... Whatever, the market will decide once Firefox has become to crappy...

Trailer page with sheetcounts

Similar Messages

Maybe you are looking for