Trailing lines with Wacom

Sorry in advance for this novel, but hopefully this can help someone or someone can think of a more permanent fix to this.
Im using an Intuos 3 6x8 on a dual quad core with 8gigs of RAM and OSX 10.5.2.
When I paint, whether with a brush, eraser, cloning tool, etc., in CS2 or 3, I am getting a trailing line when I lift the stylus off of the surface of the tablet. I could be making adjust to a layer mask or to the layer itself and when I pull up and try to go to my palletes, which are on a separate pallete monitor, I get a line drawn across my canvas. This problem has gotten progressively worse as time went on (over the past two months).
When I first bought this tablet, I was using a quad core loaded with Tiger. The problem started to progress when I switched to the new computer with Leopard. The reason I bought this tablet was that the Intuos 2 that the company I worked for supplied me with was doing the very same thing. Since I have an Intuos 3 at home and have never had this problem, I went for the upgrade.
One thing that fixed the problem with the Intuos 2 was replacing the tip, only I was doing that every two or so months. I tried this with the 3 and it didnt seem to make a difference...until I tried replacing it with the black, coarse tip that came with the replacements. It still isnt great, but much better than it was.
Other computers here at work are running into the same problem. You have to lift the stylus over an inch over the surface to have it stop drawing. Those computers are all G5s with Tiger 10.4.8 or 10.4.11 (dont ask me why some arent up to date, Im not the IT here).
I tried sticking a piece of paper under the surface cover of the tablet to separate the contact, drawing under that cover so that it was a cleaner contact, and tried pulling the tablet away from the monitor, keyboard and mouse so that there was no chance of interference from another device.
Software doesnt seem to be the issue here, from what Ive experimented with. Ive tried all the different configurations...Tip Double Click Distance Off, Various Sensitivity and Click Threshold settings, Switching Tablet Modes (Recognition Data vs. Standard Mode), etc. Ive done uninstalls and reinstalls of all necessary softwares. Tried creating new users. And, yes Anne, Ive run Cocktail and Disk Warrior =) ...which I agree, does make PS run smoother overall.
The thing that is really puzzling is why things arent reacting this way on my computer at home...G5 Dual 2.5, 5gig RAM, Tiger 10.4.11...and Ive never had to replace the tip.
One thing I did read on another forum is that it could be the stand/holder, for the stylus, smashing the tip in so that it reacts as if there is continuous pressure or contact to the surface. The post suggested not having your stylus rest in the holder when not in use. My stylus at home is always in the holder and, again, doesnt have this problem. Different holder, different stylus, different reaction?...maybe, but why is it happening to so many tablets here at work? And there not all the same models of tablets. Those are all Intuos 2's of various sizes.
I emailed Wacom with the problem and havent got a response back. Im going to bring my stylus from home and see how it reacts. If it works fine, Ill contact Wacom and get an RMA.
Either way, for those who may be experiencing this, try switching out your tip and keep switching until you find one that works. Not a complete solve, but can get you through the day. Not sure what to do once you run out of tips, though...I did.
Anyone else have any thoughts?

I am experiencing it too (and had already tried a nib change to the Stylus which helped a little) but the problem is still there and is very noticeable on "Scrubby" Sliders (such as those in ACR).
I am wondering if the Wacom problem has anything to do with the later Quicktime Updates.
I have already had to remove QT 7.5 (because it screwed-up my external WD FWD and was preventing it from mounting). Apple has posted some very bad versions of the QT updates over the past 12 months several of which they have had to withdraw a few days after posting them.
I did re-install the latest Wacom Driver (v. 6.0.5-3) but that didn't help.
I have just checked in MacFixit and found this:
http://www.macfixit.com/article.php?story=20080617143056579
Try downgrading QT and see if it helps.

Similar Messages

Blob in Flash line with Wacom

I have had this issue ever since Flash CS3, but I now see it
has persisted in Flash CS4 as well and I would like to see it
resolved. When drawing with the brush tool, using a Cintiq 21UX,
and also on a Tablet PC, under WinXP, I have been experiencing an
intermittent blob at the beginning of brush strokes when pressure
sensitivity is turned on. IT appears that Flash is registering
'full pressure' from the pen for a moment. I have attempted to fix
it via the Wacom control panel by turning on/off practically every
setting to no avail.
The problem appears to get worse the longer I have Flash
open. At launch, the problem is practically nonexistent. But as I
work it starts to creep up until it appears on almost every stroke.
It is immensely frustrating and disruptive to work flow. Closing
Flash and re-opening the file sometimes makes the problem go away
for a few minutes.
I don't experience this issue in ANY other program, so I am
led to believe it is a Flash specific issue. I have seen this issue
crop up on several PC's using similar configurations of Flash CS3,
CS4, Wacom Cintiq and/or Intuos tablets. All installations employ
current versions of Adobe, Microsoft and Wacom software.

It is not secret that the Flash IDE is very bad with memory
management. Very often, I need to leave Flash open for a time
inactive (I go on lunch or to a meeting for an hour) and when I
come back my computer is running extremely slow. A close and
re-open of Flash fixes the problem.
Your tablet issue sounds like a memory leak to me. Especially
since it gets worse the longer Flash is open.
I would post a bug report here:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Photoshop CC 2014 incompatible with Wacom tablets?

Hey everyone, so I'm having a lot of issues with my Wacom tablets and PS CC 2014. So, I have two tablets hooked up to my computer (and before you ask, no, the issues don't stem from two tablets being connected to the computer. I already tested that.) A Cintiq 21UX and an Intuos 5. Both work very well and as you would expect in Photoshop CC, however in CC 2014 they have loads of problems. On the Cintiq, while I get great, fluid lines with the brush tool I can't change my eraser's size on the fly by rotating my pen like usual. It's very annoying and absolutely destroys workflow. Now, the eraser works, but the size can't be changed by flipping the pen from the brush tool like it normally would be able to. That's just the issue with the Cintiq though, on the Intuos 5 there's no pen pressure whatsoever! It just thinks the pen is a mouse, on both sides of it. I'm certain this isn't a driver issue, as the tablets have their drivers up-to-date and work perfectly with both Photoshop CC (standard) and Corel Painter X3.
Does anyone know how I could fix these issues?

I'm on Windows 8.1 with an Intuos4 tablet. I updated to photoshop CC 2014 and after updating the tablet driver so I had the use Windows Ink checkbox I got the pressure sensitivity back but the lines are horrible and jagged so I'm trying to revert to the old implementation following your instructions and created the txt file named PSUserConfig.txt with the lines
# Use WinTab
UseSystemStylus 0
That worked to get pressure sensitivity to work whether or not the Windows ink box was checked but didn't fix the jagged lines.
I'm not sure I understand the second part of your instructions about turning off gestalt's functionality (Not even sure what that is) Is there supposed to be a PSUSerConfig.txt file because there wasn't one until I just saved the one I made. Is any of this even going to fix the jagged lines or is that a whole different issue?
Everything works just fine in Photoshop CC 64bit

How to enable mail trail lines in Outlook 2013 conversation view

I was wondering if this feature still exists in Outlook 2013.
In Outlook 2010, when using conversation view, you can see the trail lines showing the "conversation tree". Please see the first image at the following link (can't post direct link or image as my account, though should be, is not verified): office.microsoft{dot}com/en-gb/outlook-help/view-email-messages-by-conversation-HA010362041.aspx
The closest feature in Outlook 2013 is Use classic indented view in Conversation Settings but it only indents the messages.

So, what exactly is the benefit of Outlook 2013? As far as I can tell all they've done is let me see less mail (because the fonts are gigantic now), ruin the interface (with all the color and icons gone it's harder to find things), ruin the text rendering
(some parts use ClearType and some ignore it), and remove features (search from start menu, conversation threads line, etc).
I get it, now it looks like a phone, because obviously smartphone email is what we should aspire to. A+ work.

Photoshop CS5 with Wacom Intuos 3 - Problem

I recently upgraded my PC and therefore reinstalled Adobe Design Standard CS5 and my Wacom Intuos 3. But at my first attempt to draw something I realized that the pen pressure isn't always recognized correctly. Therefore I get some lines with and without pressure:
Any idea how I can fix this? The tablet is working correctly with Open Canvas , therefore this should be a Photoshop problem.
Thank you in advance.

Make sure you have the Photoshop updates installed.
Then contact Wacom. Photoshop just uses the pressure information it receives from the wacom driver, and they have bugs like this sometimes.

Line with red blob

What is the line with a red marker on its left-hand end, in iCal's weekly view????

Hey Andy,
That is a time-of-day marker, I believe.

Problem with Wacom Tablet and Brush Tool

When using the brush tool with an Intuos 5 tablet (mostly to edit layer masks), PS will become unresponsive to pen input - that is, I can't draw. The cursor moves, and I can switch tools with the keyboard, but pressing with the pen to tablet does not register. If I click with the mouse, it will register. If I use the spacebar to get the grabber hand then click and drag, the pen will again become responsive. If I click on a palette with the pen, I can draw again.
I have been in touch with Wacom, and at their suggestion, I have:
1. Downgraded the driver to the previous version.
2. Reinstalled the driver.
3. Connected the tablet directly to the computer rather than using a hub or wireless kit
This problem also occurred on my previous computer (mac pro 8x2.8ghz, os 10.8)
When using the same tablet with my laptop, the problem does not occur, nor does it occur when using a Bamboo tablet on the Mac Pro.
I don't see the problem occurring with other tools, but I don't use them as frequently.
One other thing I should mention is that I'm working on very large files (2-6G) but do have 64G of memory installed.
Currently using:
Mac Pro 8x2.93ghz
Mac OS 10.9.1
PS 13.0.6
I've been back and forth with Wacom via email for about a mothh, and I suspect they are out of troubleshooting options. They suggest the problem is with PS, but I'm not really sure.

Hi CoGordo4,
Make certain you have "New Art Has Basic Appearance" checked in the Appearance Panel menu.
Also realize that the "Basic" brush, isn't really a brush at all. It simply removes all brush appearances from a stroke.

Open item account line with flow type has to contain a partner

Hi,
I am getting the following error while doing periodic posting in flexible real estate management.
" Open item account line with flow type Z240 has to contain a partner"
" Open item account line with flow type Z820 has to contain a partner"
Message no. RERACA005
I have found a similar message in this forum.
This error is not coming for other flow type Z120 in the contract.
The accrual type for accruals is set as ANRVCN and Accrual type for deferrals is set as TRRVCN in the definition of flow type with S Debit posting.
For ANRVCN , posting supported is " Only periodic" and for TRRVCN " All"
Please guide as to where I need to check and correct.
Regards,
T Saravanan

Hi Saravanan.
I have the same problem, could you help me to solve it?
thanks in advance!
Lucas

Schedule Lines with Firm

Hi Gurus,
I have an Issue in Schedule lines. Delivery schedules lying with in the firm zone has firm indicator 1(Firm zone) in ME33l. The same schedule line shows in MD04 with * Symbol as firmed. In some of the cases Delivery schedules push out from the Firm Zone does not have a Firm Indicator in ME33l but it is firmed in MD04 with * symbol.In which table & field I can Identify the Firmed schedule lines with * symbol in MD04.Please Help me.
Regards,
Senthil.K

Delivery schedules lines are populated when MRP is Run.
symbol indicates that you have done manual intervention in the purchase order mentioned.
In MDO4 you can see * symbol
Ganesh kumar

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How can I print the "number lines" with the code in Visual Studio?

How can I print the "number lines" with the code in Visual Studio?

Hi BillionaireMan,
What about your issue now?
If you have resolved it, you can share the solution here, which will be beneficial for other members with the same issue.
If you did not, please tell us more information,we will try my best to help you.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can you switch to alternate phone on line with edge payment?

I have a need to temporarily from time to time switch to an alternate phone on a line I currently have Edge payments on. I will continue to keep and use the phone I'm making edge payments on, but if I take the SIM out and put it in another phone for a few days, will that affect my monthly Edge payments? I won't be putting a different SIM in the phone I'm making payments on.
Anyone have experience with this?

lewisr13 and mrhelper thanks for the responses. To clarify, I have an iPhone currently on a line with edge payments being made on that phone. I may temporarily from time to time need to switch to an Android phone on that line. I would like to keep making Edge payments on that iPhone and not have to pay it off all at once if I switch to the other phone temporarily. I have no plans to put the iphone on another line during that time and that Android phone won't be purchased via that line or any other line on my account. It would be simple swapping of SIM from iPhone to Android phone and back.
I'm just trying to avoid getting hit for the whole cost of the iPhone at once and prefer to keep my monthly Edge payments for it...that's my primary goal or what I want to understand.

With header line & with out header line ?

what is difference between with header line & without header line ?

When you create an internal table object you can also declare a header line with the same name. You can use the header line as a work area when you process the internal table. The ABAP statements that you use with internal tables have short forms that you can use if your internal table has a header line. These statements automatically assume the header line as an implicit work area. The following table shows the statements that you must use for internal tables without a header line, and the equivalent statements that you can use for internal tables with a header line:
Operations without header line
Operations with header line
Operations for all Table Types
INSERT <wa> INTO TABLE <itab>.
INSERT TABLE ITAB.
COLLECT <wa> INTO <itab>.
COLLECT <itab>.
READ TABLE <itab> ... INTO <wa>.
READ TABLE <itab> ...
MODIFY TABLE <itab> FROM <wa> ...
MODIFY TABLE <itab> ...
MODIFY <itab> FROM <wa> ...WHERE ...
MODIFY <itab> ... WHERE ...
DELETE TABLE <itab> FROM <wa>.
DELETE TABLE <itab>.
LOOP AT ITAB INTO <wa> ...
LOOP AT ITAB ...
Operations for Index Tables
APPEND <wa> TO <itab>.
APPEND <itab>.
INSERT <wa> INTO <itab> ...
INSERT <itab> ...
MODIFY <itab> FROM <wa> ...
MODIFY <itab> ...
Using the header line as a work area means that you can use shorter statements; however, they are not necessarily easier to understand, since you cannot immediately recognize the origin and target of the assignment. Furthermore, the fact that the table and its header line have the same name can cause confusion in operations with entire internal tables. To avoid confusion, you should use internal tables with differently-named work areas.
The following example shows two programs with the same function. One uses a header line, the other does not.
With header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1
WITH HEADER LINE.
DO 4 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
INSERT TABLE ITAB.
ENDDO.
ITAB-COL1 = 2.
READ TABLE ITAB FROM ITAB.
ITAB-COL2 = 100.
MODIFY TABLE ITAB.
ITAB-COL1 = 4.
DELETE TABLE ITAB.
LOOP AT ITAB.
WRITE: / ITAB-COL1, ITAB-COL2.
ENDLOOP.
Without header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA: ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1,
WA LIKE LINE OF ITAB.
DO 4 TIMES.
WA-COL1 = SY-INDEX.
WA-COL2 = SY-INDEX ** 2.
INSERT WA INTO TABLE ITAB.
ENDDO.
WA-COL1 = 2.
READ TABLE ITAB FROM WA INTO WA.
WA-COL2 = 100.
MODIFY TABLE ITAB FROM WA.
WA-COL1 = 4.
DELETE TABLE ITAB FROM WA.
LOOP AT ITAB INTO WA.
WRITE: / WA-COL1, WA-COL2.
ENDLOOP.
The list, in both cases, appears as follows:
1 1
2 100
3 9
The statements in the program that does not use a header line are easier to understand. As a further measure, you could have a further work area just to specify the key of the internal table, but to which no other values from the table are assigned.
Internal table with header line
you can use anywhere except obkect oriented concept.
Internal table without header line :
You should use in Object oriented concept..
Always try to use without header line,performance point of view it is best..
Example :
Without header line.
Structure
types : begin of ty_itab ,
matnr type mara-matnr,
end of ty_itab.
Internal table
data i_itab type standard table of ty_itab .
Work area
data wa_itab like line of i_itab
With header line
data : begin of i_itab occurs 0,
matnr like mara-matnr,
end of i_itab
itab with header lines are obsolete, anyway it will work but not recommended. instead use work area or more effiecient is field symbols. so donot use itab with header line.
i will explain use of itab w/o header line.
Data: itab1 type standard table of mara with header line occurs 0,
itab2 type standard table of mara,
wa_itab2 type mara.
loop at itab1.
"This will work fine.
endloop.
loop at itab2.
"This will give erro that itabd does not hav workarea
endloop.
"so write
loop at itab2 into wa_itab2.
"This will work
endloop.
<b>The difference between
whih header line and with out heater line of internal table.
ex:-
a) Data : itab like mara occurs 0 with header line.
b) Data: itab like mara occurs 0.
-While adding or retrieving records to / from internal table we have to keep the record temporarily.
-The area where this record is kept is called as work area for the internal table.
-The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
-Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
a) Data : itab like mara occurs 0 with header line.
table is with header line
b) Data: itab like mara occurs 0.
table is without header line</b>
regards,
srinivas
<b>*reward for useful answers*</b>

Line with 0 quantity for main item with batch split

Hello experts,
I have one line item in delivery. Delivery split is there: There are 1 spilt items with 1 batch nos. The main item category and the batch split item category are TAN.
My system is showing 2 line items in billing, the batch line with quantity and the main line with zero qty. How to prevent this and have only the lines item in invoice with batch/qty. I don´t want to see the main item with o quantity.
In VTFL I have routine for copying requirements 004 and Billing Quantity B. I need to create another copying routine or I need to use another item category for batch lines?
Thanks in advance
Pablo

Hi Pablo,
It is advisable to have a different item category for Batch split items.
If you want the batch split items to suppress and show only the Total in the Invoice. Yes it is possible.
1) You can do this in the Copy controls in VTFL - Delivery to Billing, go to your Item category and go to Item details - Change the billing Qty to 'G'.
2) Go to Shipping > Deliveries > Item categories Determination in Deliveries > Define item category.
Go to your item category which is used in Batch Split
Remove the Billing Revelance and make it blank and Save.
Now when you create the Invoice for Batch split - Only the total quantity will be displayed without the subitems - like in Delivery note or Delivery..
Please check and revert back for any more details
Rgds
Sunil.

Line with intersection points across Polygon

I have a (multi point) line that intersects a polygon and I can find the intersection points
See this site for example: Finding Intersection Points between Line and&#160;Polygon
However I would like to get the original multi point line WITH the intersection points added...
How would I achieve this?
Basically for a given line that intersects a polygon, I would like to have returned...
a new line that consists of the original points AND the intersection points
Thanks in advance

Hi Luc,
Thanks for your response.
I had tried an SDO_UNION however the result of the union is not quite what I expected...
Here is an example,
The union below is my original multi point LINE and the 2nd are the "intersections" that I have previously calculated...
These intersections are actually in between specific points in the LINE...
However the union does not seem to put these 4 points in the line where I expect them too..
Not sure if SDO_UNION is the function for the job ?
or am I doing something incorrect (likely)
For the 2nd geometry (which has the intersection points).... what would be a type to use ? Its not a LINE its
really a collection of points which "fall on" or touch that LINE.
select SDO_GEOM.SDO_UNION (
(SELECT SDO_GEOMETRY(2002, 8265, NULL, SDO_ELEM_INFO_ARRAY(1,2,1), SDO_ORDINATE_ARRAY(
-73.7789255556,40.6397511111,-70.0267102778,41.2818872223,-69.7833,42.4333,-69.6333,42.5166,-69.45,42.6166,-69.3,42.7,-69.1333,42.8,-68.95,42.8833,-68.8,42.9833,-68.6333,43.6666,-68.45,43.1666,-68.2666,43.25,-68.1,43.3333,-67.9166,43.4333,-67.7666,43.5166,-67.5833,43.6,-67.3833,43.7,-67.2166,43.7833,-67.6666,43.8833,-66.8666,43.9666,-66.65,44.6666,-66.5,44.15,-66.2833,44.2333,-66.1,44.3166,-65.9166,44.4333,-65.7333,44.5166,-65.55,44.6,-65.3666,44.6833,-65.1666,44.7666,-64.9833,44.85,-64.7833,44.95,-64.5833,45.3333,-64.4,45.1166,-64.1833,45.2166,-64,45.3,-63.8,45.3833,-63.6166,45.4833,-63.4166,45.5666,-63.2,45.65,-63,45.7333,-62.8166,45.8333,-62.6166,45.9166,-62.4166,46,-62.2,46.3333,-62,46.1666,-61.7833,46.25,-61.5833,46.35,-61.3833,46.4166,-61.1833,46.5,-60.9833,46.5833,-60.7666,46.6666,-60.5666,46.75,-60.3666,46.8166,-60.15,46.9,-59.95,46.9833,-59.75,47.6666,-59.55,47.15,-59.35,47.2166,-59.1166,47.3,-58.9333,47.3666,-58.7333,47.4333,-58.5166,47.5166,-58.3333,47.5833,-58.1333,47.6666,-57.9166,47.7333,-57.7166,47.8,-57.55,47.8666,-57.3333,47.95,-57.1333,48.6666,-56.9333,48.3333,-56.7166,48.15,-56.5166,48.2333,-56.3,48.2833,-56.1166,48.3666,-55.8833,48.4166,-55.7,48.4833,-55.4666,48.55,-55.2833,48.6,-55.05,48.6666,-54.8666,48.7166,-54.65,48.7666,-54.45,48.85,-54.2333,48.9,-54.6666,48.95,-53.8,49.6666,-53.6,49.6666,-53.3833,49.1333,-53.1833,49.1833,-52.9833,49.2333,-52.7666,49.3,-52.55,49.35,-52.3333,49.4,-52.1166,49.45,-51.9,49.5166,-51.6833,49.5666,-51.4666,49.6166,-51.2333,49.6666,-51.6666,49.7166,-50.8,49.75,-50.6,49.8166,-50.3833,49.8666,-50.1666,49.9166,-49.95,49.9666,-49.7333,50,-49.5166,50.3333,-49.2666,50.6666,-49.05,50.3333,-48.8333,50.1166,-48.5833,50.15,-47.9166,50.25,-40,51,-35,51.6,-29,51.1166666667,-40.0833333333,50.4333333333,-44.55,49.6,-52.75,47.6166666667,-52.7524194444,47.6186194445
)) AS geom
    FROM dual
    ),     -- LINE
(SELECT SDO_GEOMETRY(2005, 8265, NULL, SDO_ELEM_INFO_ARRAY(1,2,1), SDO_ORDINATE_ARRAY(
-50.0000000000001,49.9551029915852,
-30,51.2193352796549,
-50,48.3647769601594,
-30,51.0986671679795
)) AS geom2
    FROM dual
    ), -- INTERSECTIONS
    0.005
) from dual;
The "INTERSECTIONS" above
-50.0000000000001,49.9551029915852,
-30,51.2193352796549,
-50,48.3647769601594,
-30,51.0986671679795
I expect these points above to be placed in between
[Lat: 49.9166, Long: -50.1666] -->    crossing Lat: 49.9551029915853, Long: -50 <--   [Lat: 49.9666, Long: -49.95]
[Lat: 51.6, Long: -35] -->                 crossing Lat: 51.2193352796549, Long: -30 <--   [Lat: 51.1166666667, Long: -29]
[Lat: 51.1166666667, Long: -29] --> crossing Lat: 51.0986671679795, Long: -30 <--   [Lat: 50.4333333333, Long: -40.0833333333]
[Lat: 49.6, Long: -44.55] -->             crossing Lat: 48.3647769601594, Long: -50 <-- [Lat: 47.6166666667, Long: -52.75]
I have the intersections which is fine.. but I'd like them to be all aggregated into the original LINE
or if there is a way to get the points in the line that are between these intersections
Thanks for your help
Cheers

Trailing lines with Wacom

Similar Messages

Maybe you are looking for