Training and Event management - IF I run PEPM and book event nothing happens

Hello..
My query is regarding booking of event/course from PEPM.
I Have done profile match up and get Training proposals icon
When I click on icon and proceed for booking , booking screen appears however at bottom "The search has not produced any hits" message is displayed (Note : Still I can see course offering are available). If I try to book by selecting course nothing happens.
I m not sure if this is useful but when i checked the Program to which it is referenng to its SAPLLSO_RHPV, so i was confused whether PEPM only for LSO not for TEM ?
Please let me know if i m going in wrong way. Below screen shot for reference.

Yes, Tried for Future date as well but no result, same error

Similar Messages

  • My 2011 MBP has begun running slow with frequent 'spinning beach ball' events. I'm running Yosemite and wondered if I should of use the original install disk for maintenance.

    My 2011 MBP has begun running slow with frequent 'spinning beach ball' events. I'm running Yosemite and wondered if I should of use the original install disk for a maintenance reinstall. I presume I'd have to download Yosemite again, though I'd be happy just using Snow Leopard again too.
    Thanks for the help.

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer.  I've tried to start from the disk, and before I can even run a repair off utilities, it happens again.  What's up?

    When I started my iMac today, it started beeping like an alarm horn.  I shut it down, and held the startup button a little longer to get it to start.  Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer.  I've tried to start from the disk, and before I can even run a repair off utilities, it happens again.  What's up?  Am I screwed?  HELP!!

    What you are seeing is a kernel panic, often but not always connected with a hardware or peripheral issue, so, unplug everything except mouse and  keyboard, reboot and hold the shift key as soon as your hear the chime, continue holding it until you see the Apple Icon and spinning progress indicator, then post back.
    It will take noticeably longer than normal to start.

  • I try to unstall my creative cloud and adobe manager by delete their file, and now try to restall it, but it show the code.84

    i try to unstall my creative cloud and adobe manager by delete their file, and now try to restall it, but it show the code.84

    Hi Acacia_km,
    I believe you are only trying to install the fresh version of Creative Cloud Desktop application ? If yes, please navigate to the following location and perform the steps as mentioned .
    For Windows
    1) Navigate to : C:\Program Files (x86)\Common Files\Adobe\OOBE
    2) Rename this folder to OOBE_old and try the installation of the Creative Cloud Desktop Application.
    For Mac
    1) Navigate to : /library/application support/Adobe/OOBE
    2)Rename this folder to OOBE_old and try the installation of the Creative Cloud Desktop Application.
    Do let us know if this works fine for you or if you require any further help regarding this.
    Cheers,
    Kartikay Sharma

  • I have an Ipod touch 6 and can't updated apps. When I click update, nothing happen. Any clue?

    I have an Ipod touch 6 and can't updated apps. When I click update, nothing happen. Any clue?
    Thanks,

    There is no iPod Touch 6.  The latest generation is iPod Touch 5.  Perhaps you mean you have an iPod running iOS 6.1.6.  If so, you have a 4th generation iPod which cannot update past 6.1.6.  A 5th generation iPod can run iOS 7

  • I am trying to access an https site and am getting a "This connection is untrusted" message. I am willing to bypass, but when I click the Add Exception button and then try to click the Confirm Security Exception button, nothing happens.

    I am trying to access an https site and am getting a "This connection is untrusted" message. I am willing to bypass, but when I click the Add Exception button and then try to click the Confirm Security Exception button, nothing happens.

    unfortunately the do_not_trust certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
    <br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
    afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
    [[Troubleshoot Firefox issues caused by malware]]

  • PURCHASE PROGRAM  When I filled in my credit card details and proceed to Step 4: Enter your payment information, so nothing happens. Have tried several times. This order applies to the upgrade of CS4 and costs 270,60SEK per month.  Does not this offer?  M

    PURCHASE PROGRAM
    When I filled in my credit card details and proceed to Step 4: Enter your payment information, so nothing happens. Have tried several times. This order applies to the upgrade of CS4 and costs 270,60SEK per month.
    Does not this offer?
    Micke at Raa

    Some general information... your Adobe account and your credit card details must match exactly
    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
    -Credit card https://helpx.adobe.com/utilities/credit-card.html
    -ID support http://helpx.adobe.com/x-productkb/global/service-c1.html
    -verify email https://forums.adobe.com/thread/1446019

  • Brand new macbookpro; recent install Yosemite; computer now opens to my name and image but no place to put the password but nothing happens when trying to click on restart etc.

    Macbook Pro purchased December 2014.....was fine until update iOS  to Yosemite 2 days ago. Now, when turned on my image with my name comes up on the screen...no place to put your password.....at the bottom...restart, but used cursor to click on the restart and also my name, the image etc....nothing happens.
    I shutdown to go into the Recovery OS....and got the screen about resetting the password....which doesn't need reset. The third choice seemed more appropriate regarding the keyboard...but could not click on any of them with the cursor.
    Spent an hour with Apple support who ended up referring me to an Apple store that's a 100 mile round trip from me. Can't believe they can't help me...and can't believe this is happening to a brand new Mac.....guess Apple is no different than any other computer...install an update or upgrade...and immediately have problems.
    Exasperated,
    Joe......good thing my Dell is working

    Resetting User Password in Lion and Mountain Lion
    Boot into your Recovery Partition by holding down the Command and R keys whilst booting.
    When the Recovery screen appears, go to the Utilities menu and open Terminal.
    In Terminal, type:
    resetpassword
    ...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
    Good luck,
    Clinton

  • I go to touch an app or game button on my iPhone and the screen blinks like its trying to open, but nothing happens. Why and what do I do?

    I go to touch an app or game button on my iPhone and the screen blinks like its trying to open, but nothing happens. Why and what do I do to fix it?

    Are there any apps in the muti-tasking bar? If the app closed unexpectedly and appeared in the muti-tasking bar, end it. Double tap the home button and then hold the app until it starts to wiggle then tap the minus at the top left at the app (if you want, end all the remaining apps)  try opening them now. Hope this helps! :)

  • I got a usb charger for my 4th gen Ipod touch that at first allowed my to charge and transfer music from my laptop to the Ipod now nothing happens when I plug the usb

    I got a usb charger for my 4th gen Ipod touch that at first allowed my to charge and transfer music from my laptop to the Ipod now nothing happens when I plug the usb cord and Ipod into my laptop. Its mac so it is an apple system. I am wondering how I can fix this problem I am not very good with techy stuff so this is very confusing how it was working and it just stopped.

    Hi johnsmiff99,
    That is never fun when your iPod touch does not show up on your Mac. Take a look at the article below to walk you through on getting it to show back up on your iTunes. It is very easy to read so you wont feel overwhelmed with to much techy jargon. Let me know if you get this worked out. 
    If you don't see your connected device in iTunes for Mac
    https://support.apple.com/en-us/HT203979
    Take it easy,
    -Norm G.  

  • TS4009 I am getting a dialog bx saying "Not enough storage: this Ipad cannot be backed up....manage storage in settings" When I click settings nothing happens. The Ipad seems to be locked. How can I upgrade storage to unfreeze my I pad?

    I am getting a dialog bx saying "Not enough storage: this Ipad cannot be backed up....manage storage in settings" When I click settings nothing happens. The Ipad seems to be locked. How can I upgrade storage to unfreeze my I pad?

    Hi karlos16,
    For the error message you are seeing, I found this article:
    iCloud: Troubleshooting creating backups
    http://support.apple.com/kb/TS3992
    "This iPhone cannot be backed up because there is not enough iCloud storage available."
    This message is displayed when there is not enough storage space available in your iCloud Storage to complete your backup. You can either reduce the amount of data you are backing up under Backup Options, or you can buy more storage.
    For the issue with the iPhone appearing to be unresponsive, I recommend this article for troubleshooting:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers!
    - Ari

  • Hello. When I connect my imac Start, as usual, comes the start signal and then the white screen with the load signal then nothing happens. What could be the problem?

    Hello. When I connect my imac Start, as usual, comes the start signal and then the white screen with the load signal then nothing happens. What could be the problem?

    Presuming you get the chime, most of your Mac hardware is working and has passed the first part of the power-on self-test.
    If the screen comes on, basic graphics is working.
    The dark gray Apple is not present inside the Mac -- it must be loaded from a boot device. If the dark gray Apple appears, at least one of your boot devices has some capabilities. The flower petal/gear moves while Darwin is initializing and loading. If it stops immediately, something is terribly wrong.
    When the screen turns blue, Mac OS X has loaded and your graphics card transitions to Interrupt-driven operation. LoginWindow task draws the login screen, and Mac OS X is ready for login.
    What could be the problem depends on where in the process it stops, and whether the power light is blinking.

  • I installed creative cloud to my desktop and it won't open. The icon bounces but nothing happens, I tried uninstalling and reinstalling but I think I screwed it up more. Please help!

    I installed creative cloud to my desktop and it won't open. The icon bounces but nothing happens, I tried uninstalling and reinstalling but I think I screwed it up more. Please help!

    Dd7 do you receive any specific error messages?  What version of Mac OS are you using?

  • Safari has frozen with a dialogue box open that simply makes a statement and then invites a single click on 'ok'. Unfortunately nothing happens except and audible error beep

    Safari has frozen with a dialogue box open that simply makes a statement and then invites a single click on 'ok'. Unfortunately nothing happens except and audible error beep

    MartinandJoanne wrote:
    Safari has frozen with a dialogue box open that simply makes a statement and then invites a single click on 'ok'. Unfortunately nothing happens except and audible error beep
    Are we to guess at the statement?

  • Firefox 6 will not load when I click the icon. I have tried to uninstall it, both through the control panel and geong straight to help.exe. In both cases nothing happens. How do I uninstall this program?

    Firefox 6 will not load when I click the icon. I have tried to uninstall it, both through the control panel and going straight to help.exe. In both cases nothing happens. How do I uninstall this program?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Maybe you are looking for

  • From alv to standard transaction

    Hi, Iam using alv hiereracy for a report. say i have a material field in header if i double click can i take me to mmo3 . if yes pls let me know how to proceed with this thanks swathi

  • Is VPN session possible with OS 10.1.5?

    I am wondering if I can get VPN connection with this old iMac and OS X 10.1.5? I connect with my ISP without problems on a G4 PowerBook but with OS 10.1.5 I cannot even find where to enter settings for my session. I mean, the Network Setup Assistant

  • Color differences between high and low res images in Illustrator pdfs

    OK, I'm creating a tradeshow graphic for a client. I designed the whole thing in Illlustrator CS6. But for the proof, I used a low res image of the sky (before we purchased it). Everyone was happy. It was a low-res RGB image imported into Illustrator

  • ESS Payslip error : Form ZF01 does not exist

    Hi, We have created a form in PE51 that is ZF01 and include IMG. But we r getting the following error message: com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Form ZF01 does not exist      at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(M

  • Blurry External Monitor

    I have a Gateway FPD2485W external widescreen monitor connected DVI. In the past week or so I've noticed that even at its native resolution 1920x1200 the screen and text look blurry (in fact, red text looks downright bleeding). I've tried different r