Training Calendar in Training & Event Management.

Hi Gurus,
Do we have any option for Training Calendar in T&EM? Where can we create it?
My client has a requirement that if he designs a training calendar for a year or a quarter, relevant employees at supervisory level has to get mail about the designed training calendar. I hope this is possible through workflows. Please correct me if I am wrong.
Points assured!
Thanks in advance.
Nivedita.

1. define factory calendar in the tcode SCAL and the same thing you have to assign in the img-training and event management-business event preparation-location-create location- there you have to assign factory calendar.
2. if you want training schedule you have to go img-training and event management-business event preparation-define time schedule if you enteer into that you should in the first coloumn any number for ex 01 3 day schedule and you have to select this and click on day segment in day segment give normal again select normal and click day schedule there you should give start and end times of the schedules for morning,afternoon and evening and this time schedule you will assign to the business event type which comes under business event preparation
also see:
S_AHR_61011887 - Master Data Catalog
check the tcode OOET OOEG----to create business groups and business events

Similar Messages

Training and Event Management Calendar in Portal iView

Has anyone implemented Training and Event management in the portal and if so, how did you develop the Calendar iView?
Did you use WebDynpro, .NET, or some other method?
Your assistance is appreciated.
Thanks,
Donna Maupin

Hello,
From what I recall, TEM in ESS can be configured via ITS based service iviews.
There are some services like PV3I, PV7I, PV8I etc which you can find out using tcode SICF.
The portal consultant can then create ITS based iviews for these services.
Since you are using EHP5, I think these services are now obselete. Please check further on this.
As mentioned earlier, you can go for the LSO rather than TEM.
Best Regards.
Karan.

Extraction and loading of Training and Event Management data (0HR_PE_1)

hello,
I've got the following doubt:
before BI 7.0 release, extractor 0HR_PE_1 extracts event data (eventid, attendee id, calday,...) but if you load straight to cube 0PE_C01, as Calendar year/month needs a reference date (for example, event start date), you'll get total duration of event in hours or days refered to event star date.
So in a query filtered by month, you get total duration of an event that starts in the filtered month but it couldn`t end until few months later o year later, so you don´t get appropiate information.
Example:
Event calday Hours
10004377 20081120 500 but from event_attr event end date is 20090410.
In a query filtered by 200811 you get total duration time (500 hours when in 200811 event hours have been 20) or if you filter by any month of 2009 you don´t get information of duration of that event.
I had to create a copy of standar cube (without calday, only Calendar year/month, Calendar year in time dimension) and disaggrate data creating as many entries for an event as months lasts and adjust calculation of ratios duration of event (duration of event in each month/ total duration of event).
The question is: Is there any improvement or change on business content in BI 7.0 to treat Training and Event Management data? Has anybody had to deal with that?
Thank you very much.
IRB

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Attendance Requested Status in Training & Event Management

Hi Friends,
In Training & Event Management, the User goes to the u201CTraining Centeru201D in ESS to submit his nomination for a Business Event to the Immediate Superior. (Path : ESS, Training Center, Booking Offer, Add to Basket, To Basket, Proceed to Request, Request Attendance).
Now for that User, the Status comes as u201CAttendance Requestedu201D for that Business Event & a Workflow is triggered to his Immediate Superior for Approval.
When the User refreshes the screen or logs in the ESS again the Status u201CAttendance Requestedu201D for that Business Event vanishes although the Immediate Superior has not approved his Attendance Request.
It is desired that the Status u201CAttendance Requestedu201D should be displayed in the Users u201CMy Bookingsu201D till the Immediate Superior approves it.
Also it is desired to have a report of how many such u201CAttendance Requestedu201D nominations are pending for a specific Business Event.
Pls advise.
Warm Regards,
Abhijeet

1. define factory calendar in the tcode SCAL and the same thing you have to assign in the img-training and event management-business event preparation-location-create location- there you have to assign factory calendar.
2. if you want training schedule you have to go img-training and event management-business event preparation-define time schedule if you enteer into that you should in the first coloumn any number for ex 01 3 day schedule and you have to select this and click on day segment in day segment give normal again select normal and click day schedule there you should give start and end times of the schedules for morning,afternoon and evening and this time schedule you will assign to the business event type which comes under business event preparation
also see:
S_AHR_61011887 - Master Data Catalog
check the tcode OOET OOEG----to create business groups and business events

Business Event Brochure in Training and Event Management?

Hi Guru's
My client has a requirement as follows. The training administrator decides the Business Event Types which for which superiors can book their subordinates or not. Those events are stored at a particular place. Once the administrator stores them, a mail should be triggered to all the superiors. Thus superior can have a list of event types for which he can book his subordinates. When he books for such events, a mail should be triggered to his subordinates regarding the training event. If an employee books for an event, a mail should be triggered to his superior for approval.
How is this possible? According to me, those events will be "Included in Brochure" (in Business Event Type Infotype). Am I right?
Please suggest me.
Points assured!
Thanks in advance.

Hello ,
see the links it might help :
Business processes of Training and Event Managment
Training and Event Management
Lots of workflow

TEM and FI/CO (Training and Event Management)

Hi All,
I wish to track actual cost per event in PE (TEM - Training and Event Management). Was considering having a Internal order per Instance of event. Have any Idea on how to set up something like this?
Appreciate all ideas,
LB

Hi Dean,
using internal orders you have to consider that sending and receiving cost center have to in the same company code.
If you do not want to distribute the costs to FI/CO but only report them, you can use the cost items provided by TEM. We have set up something similar for our plants in South Europe.
We have created some cost items and fill them manually with the training costs. Additionally we have created a report that evaluated this costs and combines them with the employee costs (derived from salary).
Best regards
Michael

Course Catalog in Training and Event Management

Hi TEM Gurus,
My client wants that users can see only courses of training and event management business catalog in ESS, they can't book or do any activities related to TEM. How we can put restriction for that requirement. We are using ITS services PV7I and PV8I.
Could you please update me as early as posisble ?
Thanks and Best Regards
Puneet

Hi Dear,
Thanks a lot for quick reply. Could you please give me details inofmration .. How to do changes in the system..
How to disable book and cancel functionality from the portal.
Thanks and Best Regards

PMS and Training and Event Management

Hi Gurus,
Our one the of the client implementing PMS and Training and Event Management.
Could anyone suggest me what are the questions need to be asked in initial meeting with the client.
and if anyone has configuration documents on PMS and Training and Event management please forward to me,
my id would be [email protected]
Regards,
Rajesh Soma

The prerequisites of PMS is OM and PA is mandatory,
PMS is just like an interaction between the manager and the employees in an enterprise, based
On his work they are going to put some rating etc.
In the standard system employee called as “Appraise” Manager called as an “Appraiser” and Manager’s Manager called as Higher level manager “Part Appraiser “ can be a self-peer & customer they can save & provide their Comments to the “Appraiser”
First you take the requirement form client side what are the process and how Appraisal system in client then you have to prepare one sheet like Preparation ,Planning,Process
for business functions and other check below :-
HCM, Performance Management (Flexible) 01 - SAP Documentation
HCM, Performance Management (Predefined) 03 - SAP Documentation
check below once :-
Tcodes for PMS Basic Setting
OOHAP_BASIC      Basic Appraisal Template Settings
OOHAP_CATEGORY      Appraisal Category Settings
OOHAP_CAT_GROUP Category Group Settings
OOHAP_SETTINGS_PA PA: Settings
OOHAP_VALUE_TYPE Standard Value Lists
T codes for PMS Process
PHAP_ADMIN     Administrator - Appraisal Document
PHAP_CATALOG     Appraisal Template Catalog
PHAP_CHANGE     Change Appraisal Document
PHAP_CREATE     Create Appraisal
PHAP_PREPARE     Prepare Appraisal Documents
PHAP_SEARCH     Evaluate Appraisal Document
start your work with above things any other post here again ......

Appraisals & training and event management problem

Hi gurus.
I'm trying to configured the integration between Appraisal and Training & Event management (Appraising a Business Event and Attendee Appraisal
I set an attribute HAP00 REPLA = A .
But two problems occurred.
1.
The definition of Appraisal catalog for employees is no problem. But I have a problem with definition of Appraisal catalog for Business event and for Attendees.
Through the definition of Appraisal catalog via SPRO (Training and Event Management/Recurring Activities/Appraisals/Edit Appraisals Catalog) its possible to create an appraisal templates only for employees (it looks like that, because there is only Category group Personnel Appraisals and its not possible to add new category for example Attendee Appraisal).
Can somebody help me where I can define appraisal templates for Event management or how can I get the Appraisal catalog category groups - Appraising a Business Event and Attendee Appraisal?
2.
I set the attributes SEMIN EVAEV/EVAPA to the values 2/3 in connection with table T77BF.
When I run tcode PV33 or PV34 the matchcode of appraisal templates contains the list of all object type VA. The problem is that when I run tcode PV33 I dont want to see all appraisal templates, but only for appraising a Business Event.
It is possible to configure that so? If yes, how.
Thanks in advance.
Regards

Hi,
1. transaction LSO_CATALOG
Regards and Groetjes,
Maurice Hagen

Regarding training and event management queries

hi experts,
in my company we have ess in which training and event management module is working fine.i need to develop a report in which training booked against employee through tc-psv1 means in sap-r/3 and through ess means tc-pv8i will come.means saggregation for sap r/3 and ess will come.
please help me regarding this.
how will i identifie that training has been booked against employees through sap r/3 or ess on what paramenet we will identifie.
plz help me....
is there any function module;....

solved by own

Need Report in Training and Event Management

Dear All,
I want a report in Training and Event Management consisting of attendee name and training date and venue details, price for training event and would like to know any standard report available.
Kindly let me know the std report name.
Thanks and Regards
Suresh,V

Hi!
for all reports try T-code : SAP1 ( Report Selection ) & SAP2 ( Info catalog ) here you will get all the standard reports available for that module .
Regards
Sheetal
Edited by: sheetal Gulati on May 14, 2009 7:51 AM

Email on Training and Event Management

Dear all,
I would like to know are there any email supported in Training and Event Management Module.
For example, after HR administrator help book courses for staff, system will trigger an email notification to staff mailbox with certain course detail information
Regards
Bill

Hi Bill,
In your case the event for triggering the email notifications will be when the booking is done. So before booking, for the object like Business event type and/or business event group some relationship exits. Once you do a booking of course, additional relationship will be created in different objects. Not exactly sure about the relationship code, but you can easily find out from hrp1001.
So yoor program will check for this partcular relationship, and if it exists then will send mail notifications.
Thanks!
Regards,
Chetan Shriraj Wahane

Training Need - TN in Training and Event Management

Hi
Did any one worked on Training Need (TN) in Training and event management? I have the below question.
For France there is a legal requirement to capture some 1.6 % of the employee annual gross salary towards training cost. So where to record the training cost of the employee in Training and event management and is there any link with payroll.
Logically it sounds as it does. but where and how is it connected with payroll.
Please revert if you know the solution.
Brs
Kenu.

Hi
In Table V_T77TNM_DC
We need to have the below entries
TNM                                              CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       HRTNM00_REPMOD        CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       MP168400                       CL_HRBAS_INFTY_1684_GUI_FR
TNM       RPCTNM9S_REP            CL_HRTNM_INFTY_1036_GUI_FR
Regards
Kenu

Training and Event Management

Can anyone guide me as how to create Training Events in bulk through SAP? I am getting stuck in all ways.. I am not sure where exactly FIRMLY BOOKED flag is stored coz of which we are not able to develop any programs.. Please guide me if ther is any way available to create Courses in bulk..

Firmly Booked flag is stored in Infotype 1026. If you want to create courses (E) in bulk, use planning Menu (PSVP in Training and Event Management and LSO_PSVP in LSO)
Close the thread if your problem is solved.

Training and Event Management - internal instructor

Hi people,
I am working on R/3 4.7 Ext 110 HR module. While creating a training event in Training and Event Management, I need to include the name of the internal instructor (not external). Where exactly do I do this? I do not find this option in PV10. Kindly help.
Thank you.

Hello Phoebe,
For this, first you need to maintain the Relationship A 022 (Requires) for the Business Event using the Tcode OOET with the Resource Type (Instructor).
Then use the Tcode PV10 and select data screen for the Business Event. Then make the necessary entries on the screen and then select Resource Selection on the left top of the screen. After this the new screen will pop-up of all the resource type with which u maintained the relation. Select instructor from there and click on the select resource in the left side. Again a new window will appear and select Temporarily Add Resource from there.
Hope this will help you, try and let me know.
Thanks & Regards,
Esha

Training Calendar in Training & Event Management.

Similar Messages

Maybe you are looking for