Training Course - Oracle B2B: Overview and Implementation
I am trying to learn more about a training course listed on the Oracle website that the Oracle University representatives have no information on? The web URL for the course information is: http://www.oracle.com/technology/products/integration/b2b/dev_support.html#training
Any information would be much appreciated.
Dear Sam!
I know you are Guru. I want to learn Oracle Financial like GL , AP, AR setup or configuration. As you know I was able to install EBS11i on my PC and I also logged in as sysadmin but If you can little bit tell me that after login how I can go to GL , Please be specific that what responsibility I have to select right from beginning after login as sysadmin. If you please tell me some path like select this go next select this . I know it is little anoying but your help in this regard will be appreciated. Just guide us that this is the path to setup GL/AP/AR and from that I can find some way.
Similar Messages
-
EDIFECS Mapping not found in the X12 Output file in Oracle B2B 11g
Hi,
We are using Oracle SOA suite 11g, we have created a outbound process for EDI 855 which is PO Acknowledgement.
We are using a XML Gateway for the outbound and consuming the message in BPEL. We are mapping the OAG xml to EDIFECS xml to be consumed by Oracle B2B. We had created the EDIFECS xsd and ecs file using Oracle B2B editor and got it validated.
Now the issue is we have mapped few elements in BPEL and the same data is found in the payload message in Oracle B2B, but we are unable to see the data in the X12 output file.
Any thoughts will be hightly appreciated.
Thanks
SathishHi,
Thanks for your update.
The following were the elements missing in the native X12 flat file. I verified these elements present in ecs using oracle b2b document editor.
<ns0:Segment-PO1>
<ns0:Element-355>EA</ns0:Element-355>
<ns0:Element-235>UI</ns0:Element-235>
<ns0:Element-234>UPCXREF</ns0:Element-234>
</ns0:Segment-PO1>
<ns0:Segment-ACK>
<ns0:Element-355 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="">EA</ns0:Element-355>
<ns0:Element-373>20100318</ns0:Element-373>
</ns0:Segment-ACK>
Thanks
Sathish -
Best Practices Methodologies and Implementation training courses
Does anybody know regarding Best Practices Methodologies and Implementation training courses available?
Kind regards,
Adi
[email protected]hi Adi,
please do gothrough this pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/519d369b-0401-0010-0186-ff7a2b5d2bc0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e5b7bb90-0201-0010-ee89-fc008080b21e
hope this helps you please don,t forget to give points
with regards.
Vinoth -
Oracle for genetic databases: implementations, overviews?
I'm interested in obtaining information on Oracle
implementations incorporating large volumes of information on &
including: genetic experiments (i.e., gene codes or
identifiers), optics (wavelengths, intensities, etc.) &
increases in cell growth. I'm going to be interested in Oracle
datamining &/or datawarehousing in order to get information out
of this that is not otherwise going to be obvious by looking at
it. Is there a general overview of other implementations of
Oracle (8i or 9i?) like this in the field? I'd be very grateful
for info...thanks,
Noel WhelanKevin,
I would definitely focus on 9i as we've added many new features that are relevant for bioinformatics. NEW in 9i:
- Ability to store and search XML data types
- Data mining embedded natively within database (Naive Bayes and Association Rules in 9i, Clustering and Decision Trees (using adaptive Bayes networks) in 9iR2)
- UPSERT (facility to fast update a record or insert a new record). Great for updating life science data.
- IFS forcollaboration and centralized storage of external data types such as powerpoint, word, etc. docs. Users can drag & drop files into IFS for storage, management and access within the database.
- Table Functions to allow piplined "C" procedures for performance improvements of compute intensive operations.
Many useful features are already in 8i (see below) but have been updated or now can be integrated with new 9i features:
- Gateways for native access to external data sources
- External tables for ability to make an external table appear equivalent to a native Oracle table so you can query and perform operations on.
- Oracle Text for efficient text searches
- Oracle InterMedia for storage of image, video etc. data types and ability to perform basic queries and operations on them.
- Oracle Workflow for automating processes within the database. E.g Upload data from GenBank, Mine data to find "targets" and distribute reports to appropriate scientists.
- Oracle Portal to facilitate collaboration and set up company "My.company.com" standard portals with personalized information, reports, etc.
- Oracle Thesaurus so you can define multiple synonyms for a word, gene or pathogen etc.
- Extensible indexing to enable efficient search and retrieval functions for complex domains such as text, spatial, image, chemistry, proteomics and genomics
But, bottom line, I'd jump to the new release. Check OTN and Oracle University for technical information and training materials.
cb
Dear Charles Berger,
How can I see the Internal LInks that you posted?
They look useful as I am a student in bioinformatics currently taking an intro course to database systems and will be implementing a db in Oracle8i.
Also, would you suggest I try to work with 9i and skip 8i. THe problem I have is that all the books and documentation I have is for 8i. Is 8i already history?
Kevin
[email protected] -
Training Course and material - CR800
Hello,
I am an admin in SAP CRM 2007, and need help. I want to take the best course possible to help me in my work, and I have been told that CR800 would be my best option. However, I cannot find a course scheduled. Can anyone offer a better alternative or can I get my hands on the training material softcopy at a minimum? I understand it is copyrighted, but how can I get trained if SAP does not offer the courese? Specifically we are working in E-Commerce, ISA, E-marketing, Web channel. Thank you very much for your help.Hi John,
If you want more specific learning material about SAP E-Commerce (E-Selling, E-Marketing and E-Services), also called WebChannel, Internet Sales, ISA, B2B and B2C, you can also try:
- SAP CR850 - It is more specific to E-Commerce with R/3 ECC 6 Backend.
- http://www.sap-press.com
And you can also get at SAP Market Place the following Documents.
-E-Commerce Development and Implementation Guide (very Techinical)
-E-Commerce Implementation Guide. (Installation Instructions)
-SAP E-Commerce 7.0 Development and Extension Guide'.
The guides are available in the http://service.sap.com/instguides (check the 'Operate' section for SAP CRM 7.0).
As a last option, if you feel it is not enought you can always contact SAP Education, they may find courses related to the subject.
I hope it helps you.
Felix.
Edited by: Diego Felix on Apr 6, 2011 4:45 PM -
How to implement callout in Oracle B2B 11g
Hi,
I am referring to the document http://docs.oracle.com/cd/E23943_01/user.1111/e10229/callouts.htm#CHDEFBDG and trying to implement callout for a specific requirement.
Initially i want to implement the callout using simple XML-XML transformation . For this i have done couple of settings in oracle B2B but unfortunately it is not working. Below is the detailed steps.
1) I have copied a example java Code Example of an XML-to-XML Transformation in section 13-2 of the above mentioned document to JDeveloper, compiled the code and created the jar file (TestCallout.jar).
2) I have copied the .jar file to a specific path (ex: D:\Oracle\Middleware\user_projects\MyCallout ) and mentioned the same path in B2B UI / Configuration tab/ Callout Direcotry.
3) Created a New .xsl file using Jdeveloper where i am mapping from one format of XML schema to another format of XML schema.
4) I have created a new callout in the callout tab and below are the details:
Implementation Class : com.mycallout.XMLTransform
Library Name : TestCallout.jar
Now please suggest me where i can mention the path of .xsl file which i have created, in Oracle B2B callout UI ?
What parameter name and value should i mention in the parameters section?
Below are my XSL file :
<xsl:stylesheet version="1.0"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:aia="http://www.oracle.com/XSL/Transform/java/oracle.apps.aia.core.xpath.AIAFunctions"
xmlns:mhdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.MediatorExtnFunction"
xmlns:bpel="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.example.org"
xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:med="http://schemas.oracle.com/mediator/xpath"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:bpm="http://xmlns.oracle.com/bpmn20/extensions"
xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:ns1="http://www.example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:socket="http://www.oracle.com/XSL/Transform/java/oracle.tip.adapter.socket.ProtocolTranslator"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
exclude-result-prefixes="xsi xsl ns0 ns1 xsd xp20 bpws aia mhdr bpel oraext dvm hwf med ids bpm xdk xref ora socket ldap">
<xsl:template match="/">
<ns0:Input>
<ns0:OrderType>
<xsl:value-of select="concat(/ns1:OredrStatusInquiryRequest/ns1:BranchPlant,/ns1:OredrStatusInquiryRequest/ns1:OrderType)"/>
</ns0:OrderType>
<ns0:OrderNumber>
<xsl:value-of select="/ns1:OredrStatusInquiryRequest/ns1:OrderNumber"/>
</ns0:OrderNumber>
<ns0:Item>
<xsl:value-of select="concat(/ns1:OredrStatusInquiryRequest/ns1:LineNumber,/ns1:OredrStatusInquiryRequest/ns1:Item)"/>
</ns0:Item>
</ns0:Input>
</xsl:template>
</xsl:stylesheet>
Please help me to move further.Now please suggest me where i can mention the path of .xsl file which i have created, in Oracle B2B callout UI ?In the step#4 itself, you need to add callout parameter with name "xsltFile" which should be of type string and value of this parameter should be absolute path of XSL file (including file name). So suppose you have copied the xsl in directory C:\xsl and name of XSL file is abc.xsl then value of parameter "xsltFile" should be C:\xsl\abc.xsl
Regards,
Anuj -
Oracle HRMS training course form Oracle University @ iWare Logic
Oracle HRMS training course form Oracle University Approved Education Center iWare Logic
iWare Logic provides “Oracle Apps Training” and Certification in Oracle HRMS in association with Oracle University.
Oracle HRMS Training and Certification topics
eBusiness Suite Essentials for Implementers
Enterprise Management Fundamentals: Work Structures
Workforce Sourcing and Deployment Fundamentals: People Management
Workforce Sourcing and Deployment Fundamentals: iRecruitment
Payroll Management Fundamentals: Setting Up Payroll
Payroll Management Fundamentals: Processing Payroll
Time & Labor Management Fundamentals
For details please check
http://www.iwarelogic.com/training.htm
for Special Offer on our Oracle Apps trainings please check
http://www.iwarelogic.com/oracle_applications.htm
Following are iWare Logic’s contact details,
iWare Logic Technologies Pvt. Ltd.
Aditi Samruddhi, Banner,
Pune, 411045
Maharashtra, INDIA
Phone: 91 20 66321113
Mobile: 91 9326515010
Email: info at iWareLogic.com
Website: http://www.iWareLogic.com
http://www.oracle.com/global/in/education/maps/iware_logic_technologies.html
Oracle Apps Training http://www.iwarelogic.com/training.htmSchedule for Oracle HRMS training form Oracle University is available at http://www.iwarelogic.com/class_schedule.htm
-
Oracle9i DBA OCP and Training course requirement
I need some clarifications regarding getting OCP on Oracle9i DBA:
1. Can the exams within OCA and OCP be taken in any order?
2. the training course which has become mandatory in 9i, be taken after completing all the 4 exams or should we need to take course for each exam or before taking up the first exam after completing OCA?Hi,
You cna get all details about the certification at
http://www.oracle.com/education/certification/index.html?content.html
Regards,
Anupama -
What additional resources are required to do the TestStand training courses I and II?
I have the TestStand course manuals for courses I and II and am currently trying to refresh what I learned a couple of months ago when I took the courses. I'm at the point where almost every VI required comes up broken because additional libraries are required in LabVIEW. Why aren't the additional required libraries listed in the course documentation? What are the additional libraries and how do I get them?
Hi there!
If I had to guess I would say that you're missing the TS support API libraries for LabVIEW... Since those are the only 'special' libraries used by any of the examples in the TestStand 3.x or 4.x training manuals.
I'm going to assume that you have some recent version of LabVIEW (8.x?) and some recent version of TestStand (3.x) installed? Unless you took the NI training course more than a few years ago, in which case you might need earlier version of TS, LabVIEW version really shouldn't matter. Evaluation copies ought to be sufficient so I wouldn't blame those...
(If you don't have LabVIEW at all. Make sure you have the correct LabVIEW Run Time Engine version, as that's a pretty common source of TS errors... But without LabVIEW half of the exercises in the training manual are moot anyway...)
In your LabVIEW install path, (C:\ program files etc...\LabVIEW 8.x\) look for the folder path "vi.lib\addons\TestStand\", it ought to be full of a few *.llb files that TS would furnish to LabVIEW when the product is installed. Sometimes when you install things in an unexpected order, or if you have multiple LVs installed, these items don't get put where you expect.
If the folder is empty, copy what you need from... the TestStand install path (C:\ program files etc...\TestStand x.x\) folder "AdapterSupport\LabVIEW" and restart LV. This might get you up and running.
If the folder is not empty. Try running a MassCompile from your LabVIEW Tools ->Advanced menu, there might be a version incompatibility issue...
Feel free to send me an email if you're still stuck. But there aren't any external dependencies/hardware drivers needed for the TS training sequences...
Cheers!
--Elaine R.
www.bloomy.com
Cheers,
Elaine R.
www.bloomy.com -
hi, i want to bulid training course before we deploy iphone in my bussiness what can i sue to make screen capture and connect iphone 4 or 4s to a projector in a classroom.thanks
Your iPhone is probably locked to your former cell carrier. In such case only that carrier can unlock it, so you'll need to contact the carrier. Note that unless things have changed recently only 3 offers unlocking. If you used a different carrier, they do not appear to offer unlocking which means that your son will not be able to use your old iPhone. But call your carrier and ask.
Regards. -
I need information on a very cheap oracle 11i financials training course centre around London.
Please check this website
They provide very good Online training LIVE from USA with experts working in Fortune 500 companies or Big 4 consulting firms in USA
http://www.ise-incorp.com/training.htm -
Oracle HRMS training course form Oracle University
iWare Logic provides “Oracle Apps Training” and Certification in Oracle crm in association with Oracle University.
Oracle HRMS Training and Certification topics
eBusiness Suite Essentials for Implementers Ed 4
Enterprise Management Fundamentals: Work Structures Ed 1
Workforce Sourcing and Deployment Fundamentals: People Management Ed 1
Workforce Sourcing and Deployment Fundamentals: iRecruitment Ed 1
Payroll Management Fundamentals: Setting Up Payroll Ed 1
Payroll Management Fundamentals: Processing Payroll Ed 1
Time & Labor Management Fundamentals Ed 1.1
for details please check
http://www.iwarelogic.com/training.htm
for Special Offer on our Oracle Apps trainings please check
http://www.iwarelogic.com/oracle_applications.htm
Following are iWare Logic’s contact details,
iWare Logic Technologies Pvt. Ltd.
Aditi Samruddhi, Banner,
Pune, 411045
Maharashtra, INDIA
Phone: 91 20 66321113
Mobile: 91 9326515010
Email: info at iWareLogic.com
Website: http://www.iWareLogic.com
http://www.oracle.com/global/in/education/maps/iware_logic_technologies.html
Oracle Apps Training http://www.iwarelogic.com/training.htmSchedule for Oracle HRMS training form Oracle University is available at http://www.iwarelogic.com/class_schedule.htm
-
The Advantages of Official Microsoft and Cisco Certification Training Courses
Lots of professionals in design and networking management channels are desirous to obtain various recognized Microsoft certifications like MCSE (Microsoft Certified System Engineer) and MCSA (Microsoft Certified System Administrator). These Testking
642-446 certifications can shift you from average low rewarding jobs as a programmer towards prosperous and lucrative career. People are crazy today to do anything to obtain such certifications. They invest their time, money, and energy toward achieving
their goal certifications.
But beware of internet scammers who commonly lure people into buying various second-hand tutorials and self-study oriented training programs, promising great results with Testking SY0-201 minimal efforts. However at the same time lots of reliable and solid
web sites are available also, providing comprehensive, well structured, and elaborate study material. It definitely facilitates your process of learning and guaranteeing success.
It is very important to distinguish a difference between an average and a reliable website. Take time out of your busy schedule and focus on your study course. It is better if you attend a short classroom Testking 640-863 training course instead of using
self-study oriented programs. If you search online you will come across various websites providing advanced MCSE and MCSA accelerated training courses, seminaries, laboratories, taught by experienced, well educated experts. That is why these classes are better
than self study programs because they involve better comprehension and learning, more participation, stimulating students' thinking and enhancing their overall skills and knowledge. If a person attends 14 days training course of MCSE or MCSA then he is capable
enough to formulate a solution in design and Testking VCP-410 network management issue with the help of well-trained professionals. In fact these training classes make the candidate capable of all practical abilities that help him in future career. Training
program of MCSE or MCSA guarantee graduates acceptance in the best multinational companies of the world!
Apart from MCSE and MCSA, Cisco certified Network Associate CCNA and Cisco Certified Internetwork Expert certification CCIE are highly demanded in present era. There are various training institutions providing a comprehensive and elaborate training to
the candidates. These training centers quickly familiarize the students with latest Cisco technologies and hardware. During CCNA and CCIE training sessions , attending students receive constant support and feed-back from well-trained, experienced and certified
professionals. The instructors here focus not only on theory but at forming and enhancing Testking 642-481 students' practical skills on various aspects of Cisco technologies and hardware. Thousands of graduates recommend professional CCNA and CCIE
training courses to people who wish to build a solid, strong, successful career in the IT field.
At the end I would like to recommend Testking MCSE training,Testking CCNA practice test, Testking CCIE training for gaining best guidance for the exams.MCSE (Certified Systems Engineer
for Microsoft) and MCSA
(Microsoft Certified System
Administrator). These globally recognized
certifications are highly desirable because they can
easily make the difference between a thriving career
in the lucrative design and average
low rewarding job as a programmer. (Cisco
Certified Network Associate) and CCIE
(Cisco Certified Internetwork Expert)
certifications are also in demand today.
There are several training centers that offer people
the opportunity to participate in the development of
training programs for CCNA and CCIE
in exchange for a reasonable sum of money.
When attending a CCNA five or
six days and the CCIE training course, students can
quickly become familiar with the latest technologies and
Cisco hardware.For more info about this exam Latest Dumps PDF Exam Question visit Examcollectionvce.com -
Oracle B2B not picking up Document type and document version from JMS msg
Hi,
We have developed guideline and schema for a custom positional flat file using Oracle B2B Document Editor. We were able to creat and deploy the agreement. But when we drop a message on a Queue being listened by Oracle B2B. The document type and version values were empty. We got the following error,
Error Code B2B-50083
Error Description Machine Info: (xxxxx) Description: Document protocol identification error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Document protocol identification error.
This is our Java code for testing that drops the message, and I can see the JMS header with these values.
message.setText(messageText);
message.setStringProperty("FROM_PARTY", "CT-Sender");
//message.setStringProperty("FROM_PARTY", "RemoteTP");
message.setStringProperty("TO_PARTY", "MyCompany");
message.setStringProperty("DOCTYPE_NAMEe", "CT");
message.setStringProperty("DOCTYPE_REVISION", "CT-AES");
We were able to test a 850 document successful through different document and agreement ....
Thanks
JohnWe have uploaded the ecs and xsd files. Are they the parser files you are mentioning? The following is the information we have for the transaction. I am just surprised whty the Document Type and others are empty.
Thanks
John
Id 0A9F196E132459F393C00000184B4897
Message Id 0A9F196E132459F392300000184B4893
Refer To Message Refer To Message
Sender Type Name
Sender Value CT-Sender
Receiver Type Name
Receiver Value MyCompany
Sender CT-Sender
Receiver MyCompany
Agreement Id
Agreement
Document Type
Document Protocol
Document Version
Message Type REQ
Direction INBOUND
State MSG_ERROR
Acknowledgement Mode NONE
Response Mode ASYNC
Send Time Stamp 09/07/2011 04:40 PM
Receive Time Stamp 09/07/2011 04:40 PM
Document Retry Interval(Channel) 0
Document Remaining Retry(Channel) 0
Document Retry Interval(Agreement) -
Sending ebms messages between Hermes 2.0 and Oracle B2B
Hi everyone,
I'm a italian student and for my master thesis I need to create a comunication between Hermes 2 and Oracle B2B. I just set the trading partnership and the agreement with a custom ebxml document protocol. To create the soa application for the comunication I follow this instruction: http://tomhofte.blogspot.it/2009/11/how-to-configure-ebxml-communication-in.html but when I deploy my application there is this message: "The web service invocation was successful. However, there was no response to the invocation from the server." and there are no errors. Does anyone know another way to develop this application or have some information about this application?
Any kind of help is welcome, thanks.hi,
I solved the problem! :) the message: : "The web service invocation was successful. However, there was no response to the invocation from the server." still remaiins, however I send a message to hermes B. My mistake is that I follow the second procedure, proposed by the blog I posted in the first message, to create the mediator in jdeveloper. The first procedure instead is correct.
thanks Anuj Dwivedi, yuor post has been helpful!
Maybe you are looking for
-
Forget it. The answer is that the multiple page per page setup comes up in the printing menu. (When you do command-P)
-
How to undo activated OSB session with WLST?
Does anybody know if there´s a chance to undo an activated OSB session with WLST? There´s a way to undo an UNactivated session but not an activated one (like the undo session in /sbconsole). Thanks in advance. Edited by: 956378 on 31-ago-2012 12:48
-
Hi, I have a table with different columns as follows Select * from test where ID=123456; ID LINE_COUNT CONTACT_DATE CONTACT_COMMENT 123456 1 01/21/2008 I want to Join This
-
Why a toolbar called iMesh associated with firefox ? its affecting my laptop
by mistake i downloaded iMesh and its stuck with firefox browser as a toolbar. i have uninstalled firefox and dowloaded it many times and still this iMesh getting installed with firefox, infact even when firefox was uninstalled still iMesh poping up
-
Dial tone, but no incoming calls received
Hi, Help, seems as soon as I paid my bill on Wednesday, I cannot receive calls: I have a dial tone, the phone will ring not even one full ring (but a half ring), I pick up nothing. What the caller will hear is "please dial 1 and the area code and nu