Training & Events Change User Details

Good day SAP Users,
Is there a way I can see who (username/administrator) captured an attendee against a business event in Training & Events?
Kind regards
Dorianne

Hi Dorianne,
Go to SE16 table HRP1001.
OTYPE E
OBJID bus. event id.
RELAT = A (rel. specification)
RSIGN = 025 (rel. btw. objects)
SCLAS = P (Type of related object)
SOBID = Personnel number. (ID of related object)
Get AEDTM (changed on) and UNAME (user name) fields.
Regards,
Dilek
Edited by: Dilek Ersoz Adak on Apr 30, 2010 3:53 PM

Similar Messages

API - To change user details

If you create Portal users through the API and then amend user
detail via the API using wwsec_api.modify_user then you find that
when the user logs into Portal, there details aren't visible from
the maintain user screen.
How do we synchronize the data we have just added via the API
call into, presumably the Portal30 schema?
It can be seen that their details on portal30_sso.wwsec_person$
are correct, however the corresponding table in the portal30
schema still contains the old user information. How can we
synchronize the two ? Preferably using an API
call?

I also have a similar ?, is changing user name a normal case scenario or a big problem in portal
Please reply

Change User Details iView! (From Who Is Who results!)

Hi All
I am trying to find the iView that displays the users details (the one with the picture) when selected from the who is who iview.
I can't find it anywhere can anyone help?
Thanks
Phil

Hi Phil,
I'm not sure if I'm looking at the same Who Is Who iView that you are, but the results detail view doesn't have any tabs, just headings: Communication, Dapartment Misceallaneous.
The one I'm looking for is only one iView with multiple views (its built with Web Dynpro), the location in PCD is as follows:
Content Provided by SAP > End User Content > com.sap.pct.ess.employee > com.sap.pct.ess.iviews > Employee Search
(there are two employee search objects, you want the one with the <b>com.sap.pct.ess.serv_employee_search</b> and <u>NOT</u> the one com.sap.pct.ess.area_employee_search which is just the Area Page for the Employee Search workset.
To edit this iView, you'll need the JDI Cookbook for ESS and MSS modifications.

Training & Event Management -- Room Details

Hi Experts,
How to get the room details, when I am scheduing an event. Or how to map the room to a event / course.
I have created resource rooms w.r.t. resource type room.
Regards,
IFF

Good Day.
You need to create a room resource type in transaction OORT.
Then you Create room resource in transaction OORE. In relationships tab :
specify
Is a specialization of Resource type
which you created
Then create an event type in LSO_PVCT e.g. classroom training having relationship
Requires Resource type
Here you assign the Resource type which was created
Create an event with resources under this event type
in LSO_PSV2 and here you can assign the room resource.
Hope this helps.
Happy New Year.
Best Regards

User details change on portal

Hello experts, for some odd reason I have been unable to change user details on portal recently. I am getting the following error: "A problem has occurred in the persistency. The original message was: BAPI_USER_CHANGE@BWPCLNT500: ID=01, NUMBER=492, MESSAGE=You are not authorized to change users in group".
I do have administrator roles and everything, and I used to be able to change user details (like e-mail and language). What I do not understand is why this suddenly stopped working, as it was working before (the funny thing is that even with the default administrator user from Portal it is not possible to change user details anymore). Still, how can I solve this problem? We are using EP 7.0 and another SAP system (ABAP) for user management. I am not in charge of the ABAP system, though I do have access to several transactions in there. I tried looking for the "BAPI_USER_CHANGE" thing, but I could not find it. Is that a role or something I need to assign to my user?

Hi, thanks for the answers. I checked the roles of user SAPJSF. He has SAP_BC_FP_ICF, SAP_J2EE_ADMIN and he previously had SAP_BC_JSF_COMMUNICATION_RO, but I changed it for SAP_BC_JSF_COMMUNICTION. However, once I restarted the Web AS, there was no communication between our backend system and the portal (checking the logs, I found the error "#1#com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: User SAPJSF has no RFC authorization for function group SYST." Therefore I added the role SAP_BC_JSF_COMMUNICATION_RO role, without taking out the other one, and restarted the server. There is now communication between the backend system and the portal, but I still cannot change user details from within the portal.
Any other ideas?

"You are not authorized to change users in user group XY"

Hello,
I ran a report. Within that report, a BAPI is called. It's name is user_change.
That BAPI enables you to change user details like passwords and so on...
When I tried to change the user's password, an error message occured.
"You are not authorized to change users in user group XY"
The user belongs to the group XY.
After an unsuccessful pwd change, there is no SU53 file!
So how could I solve that?
Could I explicitly define for which user groups, passwords can be changed?
Any other ideas?
Thanks a lot in advance,
holger

Hi Holger,
May be they might have restricted to change password. See <a href="http://www.sap-basis-abap.com/bc/restrict-role-to-unlock-lock-change-password.htm">this</a> for more details.

Where can i find RSRT query propertis Last changed by user details

HI All,
Some one has changed the RSRT qurery properties and we want to know Where can i find RSRT query propertis Last changed by user details.
thanks in advance.

Hello,
Please check the screen shot
In the Query Designer, General Tab Page showing the details as required at your end.
Regards
NS

Tigger event when user change iphone time

It is possible, we can trigger event if user change date and time of iphone.

Did you traced ICI, if any de-register events getting published when you close IE.

Exteranl instructor details in Training & Event mgmt.

hello groups,
where can we store the profile of Instructor in training and event management.
In TC - OOER we can enter the instructor's name and address details
only.
Pls let me know, it is urgent
thanks in advance

Dear Ram,
you can maintain this in that path: Human Resources -> Training & Event Management -> Settings -> Current settings -> Resource Management -> S_AHR_61011893 - External Instructor.
you can maintain:
1) Object (first name, last name).
2) Relationships (belong to a company).
3) Address.
4) Name format.
i hope this will help.
good luck
Abdulrahman

As a end user how to work in a " Training & Event Management Module'"

Dear Gurus,
As a end user how to work in a " Training & Event Management Module'"
Please advised
Regards
MHPO

Dear MHP,
there are lots of things you can do as an end user in TEM. You could create new events (not events types), book peoples, fix the date of the event, then create califications of the event (about the event or about the atendee). Please, read sap help issues: (in Training and Event Management) day-to-day activities, Recurring Activities and Reporting.
I hope this help you.
Santiago

Changing data directly in employee user details / who's who

Using: EP7, MSAD
Hi all,
I would like to know whether it is possible to add a modify button within the user details window (who's who) for changing data directly and not to change to a different location within the enterprise portal.
if yes, how can I do that? Is it also possible to modify different fields depending on the department of the user who wants to change a profile?
Thanks in advance
Michael

I think you'd need to write a brand new who's who for this...

Profile Match up and Training Event details without LSO.

hello,
We have requirement where we want to show Profile Match up and Training Event details in MSS.But we are not going to use LSO.
so now que is without LSO there ivew will work or not. Now this iview are present in MSS folder.Is this iview are using LSO function module because of that they might not work?
Thanks in advance.
Jayesh talreja

To make it more clear.... sorry for not explaining this initially.
1. There is a service in ESS(ITS) for profile match up.
2. For mss siddharth is asking from where does the data come in case of pv7i and 8i
So the answer for MSS is that if you need to use profile match up without LSO then you make use of the ITS based profile matchup service to identify how you will carry out a development.
I am not aware of any existing transaction for profie in MSS so you need to develop but the answer to your question is
"you can certainly use TEM (without LSO) to create profile match up in MSS".
This has been done for most of the customers by SAP as not everyone uses LSO.
Function RHPP_SHOW_PROFILE_MATCHUP will help you achieve this very easily without LSO.
Please feel free to ask for more details.

How to trigger event when changing user status?

hi,
I'm having problems in triggering my workflow.
In CIC0, When a status of a service request is changed to 'solution provided' then after saving service request, it should send a notification mail. I'm using ZBUS200116 which is deligated to BUS2000116. I've created event 'change' in ZBUS200116 which is in the start events of my workflow.
I've tried creating an action profile which uses my workflow. The action profile is attached to the transaction but still it doesn't trigger my workflow.
i've checked other existing workflows which uses the same object type BUS2000116 or ZBUS200116. These workflows were triggered by 'created' and 'completed' events only. Other added events in ZBUS200116 like 'changed' is not triggered. How is this possible when ZBUS200116 is deligated to BUS2000116?
Your response would be highly appreciated.
Thanks in advance.

hi juan
so here we are,now i got complete understanding of what u r doing and why
you know you need not have created that change event because it wont serve your purpose anyway
the reason is that because the way process in your workflow is flowing ,it wont happen that way using change event
you just follow these steps:
1, use created event in your workflow
2. that way when your contract ios created in rpocess status the event will be triggered only because you are creating a transaction whatever may be the status,so in all such cases you should use event created.
3. now coming to the point of change in status or documents in contract
in this case using loop will put you in deadlock and you will only be haing the error in such case
you use WAIT step instead ,inside it use wait using conditions out of every option
there you give your condition as change in whatever status
like if you are chaning the status from in process to some other status ,put that status inside the condition
as soon as that conditioon is met ,the WAIT step will be executed,
that way you will be able to trigger the change in status through thje workflow
so thats the solution with the approach you are using
there are many approaches you can follow in workflows ,so depending upon that you can follow the different worlkflow tools u have there.
also remember when your wait step gets executed there is always the time lag of 20-25 minutes after which changes will be reflected
hope it will solve ur probs
best regards
ashish

[BC4J] Master currency change + dirty details = warning (how?)

Sorry for the lame subject, but it's the best I could do. :)
Anyway, I 'want' something, but I could use some advice on how to accomplish it. Here's what I've been trying to realise:
- A simple master-detail scenario
- One of the detail records has been altered
- The master currency changes
- A popup comes up to warns me to either commit or rollback pending changes
And
- One of the master records has been altered
- The master currency changes
- Nothing happens
I hope this explains what I need. :) So far I've created a new CustomViewObjectImpl class which I use as a base for all my ViewObjects. In this new class I override the executeQueryForCollection() method, because if I'm not mistaken, this is the location where the check for dirty details should be performed.
However, a simple call to getDBTransaction().isDirty() is too simplistic, too unspecific.
I think I somehow need to end up with a ViewRowSetIterator instance (which has the isDirty() method) which is contained or derived from one of the detailRowSets of "this". Any ideas of how I can retrieve it?
So far, I've got something like this:
protected void executeQueryForCollection(Object qc,
                                         Object[] params,
                                         int noUserParams)
RowSet[] details = getDetailRowSets();
ViewRowSetIteratorImpl vrsi;
for (int i = 0; i < details.length; i++)
vrsi = ....; // how to retrieve it ?
if (vrsi.isDirty())
    switch (JOptionPane.showConfirmDialog(null,
                                          "Save changes?",
                                          "Attention",
                                          JOptionPane.YES_NO_OPTION,
                                          JOptionPane.WARNING_MESSAGE))
      case JOptionPane.YES_OPTION:
        getDBTransaction().commit();
        break;
      default:
        getDBTransaction().rollback();
        break;
super.executeQueryForCollection(qc, params, noUserParams);
}

Hi,
I had a quite similar need, except the "Nothing happens" part on altered master.
I realize this makes quite a difference, but maybe my solution could help you somehow.
After trying several possibilities, I considered the following approach.
1. I extended ViewRowImpl in MyViewRowImpl and wrote the following:
     private boolean areDetailsModified()
          String[]          viewLinks = getViewObject().getViewLinkNames();
          for( int i = 0; i < viewLinks.length; i++ )
               ViewLink          viewLink = getApplicationModule().findViewLink( viewLinks[ i ] );
               ViewObject     detailView = viewLink.getDestination();
               Row          linkRow = null;
               if( detailView.isExecuted() )
                    linkRow = detailView.getCurrentRow();
               if( linkRow != null && viewLink.getSource() == getViewObject() &&
                   linkRow instanceof MyViewRowImpl &&
                   ( (MyViewRowImpl)linkRow ).getViewRowState() != Entity.STATUS_UNMODIFIED )
                    return true;
          return false;
      * Assume a view row creates/updates/removes its main entity.
      * If the row itself was not modified, checks for changes in details.
     public byte getViewRowState()
          Entity          entity = getEntity( 0 );
          switch( entity.getEntityState() )
               case Entity.STATUS_INITIALIZED:
               case Entity.STATUS_NEW:
                    return Entity.STATUS_NEW;
               case Entity.STATUS_MODIFIED:
                    return Entity.STATUS_MODIFIED;
               case Entity.STATUS_UNMODIFIED:
                    if( !entity.isValid() || areDetailsModified() )
                         return Entity.STATUS_MODIFIED;
                    break;
          return Entity.STATUS_UNMODIFIED;
     }2. In my JClient client (still to use for the UIX one), I installed a JUPanelValidationListener and implemented
     public void beforeCurrencyChange( JUPanelValidationEvent event )
          Row          row = event.getIteratorBinding().getCurrentRow();
          int          rowState = Entity.STATUS_MODIFIED;
          if( row instanceof MyViewRow )
               rowState = ( (MyViewRow)row ).getViewRowState();
     }3. And yes, not so fancy, I also made some changes to trace a "user-dirty" transaction (for some insert vs. LOV issues)...
Greetings,
Adrian

Tabular Form - How to store in a column the User details (APP_USER)

Hi all,
I have let's say the following table:
USER_COMMENTS(
ID number primary key,
COMMENT_TEXT varchar2(50),
POSTED_BY_USER varchar2(50),
DATE_POSTED date,
UPDATED_BY_USER varchar2(50),
DATE_UPDATED date)
How do I, using a Tabular Form, get the USER details in the columns POSTED_BY_USER and UPDATED_BY_USER and the SYSDATE in DATE_UPDATED...
I've tried the following:
Created tabular form, all fields included. In Report Attributes > edit UPDATED_BY_USER > Display as Display as Text (saves state); Default Type: Item (application or page item); Default: APP_USER.
It's not working.
Thanks!
Andrei

It has to be a text field column type with source like the other updatable columns. You should hide that column and create a second of display as text if you want to show the content. Once this is done then you can use the default value and just type the item name there as you did:
P1_ITEM
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------

Training & Events Change User Details

Similar Messages

Maybe you are looking for