Training n event management and pd

Hi gurus,
my cliient wants to implement training n event mgnmt and pd.client is not specific about the procedures of training and development. he wants to implement as per the best practices of sap. i was only into om , pa and payroll.
i dont even have a tinge of idea abt these submodules. i tried searching in forums and other sites to to my dissapointmnt. i am in a big soup now as i need to gather the requirement and do the configurations in a weeks time i.e by next weekend. plzzzzzz help me out with some best practices or some config docs as i dont know even the basics of these. I would appreciate if some body is helping me out with config docs.
Thanks n advance,
tulsi

Hi Tulsi,
Please go to our help website :
Appraisals
http://help.sap.com/saphelp_47x200/helpdata/en/77/bff8ab4a2911d182b80000e829fbfe/frameset.htm
and you can also use the link:
https://websmp209.sap-ag.de/bestpractices
Thanks
Chetan

Similar Messages

Training & Event management and Appraisal

Hi,
Can anyone tell us that Training & Event management and Appraisal are available standard ESS package?
Thanks,
Anumit

Yes, Training & Event management and Appraisal are available in ITS based ESS business package.
But latest ESS business package(webdynpro based) do not have training and event management. You may need to deploy Learning solution. Full functionality of Appraisal is available with ehp4 of ESS BP.

Problem with Embedded Event Manager and Object Tracking

Hi,
I have a 2801 running c2801-advipservicesk9-mz.124-24.T2.bin. It has the following configuration:
track 300 list boolean or
object 10
object 11
object 12
object 13
event manager applet clear_ipsec_tunnel
event track 300 state down
action 1.0 cli command "enable"
action 2.0 cli command "clear crypto session"
action 3.0 syslog msg "IPSec tunnel has been cleared by clear_ipsec_tunnel applet"
My problem is that after the tracked object number 300 transitions from an up state to a down state, nothing happens. It seems like the applet doesn't work with object tracking. Here's what I see in logs:
Dec 7 21:52:32.236 MCK: %TRACKING-5-STATE: 12 ip sla 12 reachability Up->Down
Dec 7 21:52:37.236 MCK: %TRACKING-5-STATE: 13 ip sla 13 reachability Up->Down
Dec 7 21:52:57.236 MCK: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
Dec 7 21:53:07.236 MCK: %TRACKING-5-STATE: 11 ip sla 11 reachability Up->Down
Dec 7 21:53:07.996 MCK: %TRACKING-5-STATE: 300 list boolean or Up->Down
That's it. For some reason, the applet won't execute the CLI commands when the EEM applet is triggered. Am I doing something wrong or I have encountered some bug? Thanks.

jclarke,
Today I added the router into the tacacs server database and the applet started working just fine by using my login name. So the working configuration looks like this:
event manager session cli username "my login name"
event manager applet clear_ipsec_tunnel
event track 300 state down maxrun 30
action 1.0 cli command "enable"
action 2.0 cli command "clear crypto session"
action 3.0 syslog msg "IPSec tunnel has been cleared by clear_ipsec_tunnel applet"
Then I tried to use a login name from the local database that has "privelege 15" access and of course the debug output showed me this:
Dec 8 18:12:58.203 MCK: %TRACKING-5-STATE: 300 list boolean or Up->Down
Dec 8 18:12:58.203 MCK: fh_track_object_changed: Track notification 300 state down
Dec 8 18:12:58.203 MCK: fh_fd_track_event_match: track ED pubinfo enqueue rc = 0
Dec 8 18:12:58.215 MCK: fh_send_track_fd_msg: msg_type=64
Dec 8 18:12:58.215 MCK: fh_send_track_fd_msg: sval=0
Dec 8 18:12:58.219 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : CTL : cli_open called.
Dec 8 18:12:58.227 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.227 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : IN : Router>enable
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Command authorization failed.
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT :
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : IN : Router>clear crypto session
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : ^
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : % Invalid input detected at '^' marker.
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT :
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.775 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel: IPSec tunnel has been cleared by clear_ipsec_tunnel applet
Dec 8 18:12:58.775 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : CTL : cli_close called.
So I guess this problem arises when you have command authorization enabled and the tacacs server is not reachable or something like that. I have tried to find a way to use the local database instead of using the aaa server but didn't succeed. Although I have found an interesting workaround. Here it is:
Link: http://blog.ioshints.info/2007/05/command-authorization-fails-with-eem.html
Workaround found after reading the "Executing IOS commands from Tcl shell" from the "Tclsh on Cisco IOS tutorial".
On the above article it is mentionned that the ios_config command is executed inside the context of another VTY line (also found with the AAA debug). The workaround is to define the FIRST VTY line with "transport input none" to prevent ssh or telnet to grab it and to configure the aaa authorization without any command authorization for this line.
Kind regards
Christian Chautems
Looks great, but I am not quite sure how to "configure the aaa authorization without any command authorization for this line".
Anyway, jclarke thank you so much for taking your time to look into my problem and for your help.

RFID event manager and Jini

Hi, I'm trying to use Java Rfid System software 3.0.
I have succesfully installed it on a linux machine, I can start the event manager, the management console, all the applications are correctly deployed and so on.
Now when I try to verify the instllation starting pmlreader and tag reader, it simply does not recognizes any tag (always gives 0 tag read). If I try to communicate with the reader through the management console I get this error (when clicking on RFID readers):
"Cannot connect to Jini lookup service at this time".
(I think this problem is the same of the one with tag reader).
Jini lookup service is on and correctly running (as it is written in the log).
Does anybody have any idea?
Thank you very much
Pyppo

Hi
I think that BMC event manager is like other monitoring softwares (HP OPENVIEW , TIVOLI , NIMBUS).
Grid Control can to send alerts to any console that this console accept SNMP Traps information.
For Create SNMP Traps in GC refer to OEM Grid Control Advanced Configuration book in the OTN documentation library of Enterprise Manager
For your specified BMC refer your documentation to receive SNMP Traps and the special configuration.
In my enviroment i have integrated HP Openview OVO Console with OEM Grid control
Regards

CSM 4.2 - Event Manager and IOS FW

Hello,
   I am looking for an event management solution for IOS FW as the one CSM 4.2 already have to manage ASA, FWSM and IPS devices. As stated in the CSM documentation, we cannot use Event Manager for IOS FW.
   Any idea? Any plan to see it in the future? Should we use an external syslog server ...
   Kind regards,
       Carles

Hello friends,
Please, allow me to resurect this old post.
I have already installed CSM 4.4 and I am already managing an ASA through CSM. I have configured CSM according to next the User Guide.
http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/4-4/user/guide/CSMUserGuide_wrapper/evntchap.html
I am not able to see the Events in the Event viewer client. Would you give me an advise about how to troublehoot that?
Regards!

Training nd Event Management Question

I have an event scheduled in the past period in T&E Management.
I am still able to book attandees to this event .. I think this is not right.
However, I would like to know if there is any follow up action I need to do on this event so that the event does not accept booking or cancelling any attendees.
Appreciate input on this and I would promptly award points.

Hi,
i have no system access at the moment but in my opinion you have to " firmly book" the event.
Try the context menu on an event.
Please have also a look at:
http://help.sap.com/saphelp_erp2005/helpdata/en/42/51c7944a1211d182b80000e829fbfe/frameset.htm
Regards
Bernd

Training Need - TN in Training and Event Management

Hi
Did any one worked on Training Need (TN) in Training and event management? I have the below question.
For France there is a legal requirement to capture some 1.6 % of the employee annual gross salary towards training cost. So where to record the training cost of the employee in Training and event management and is there any link with payroll.
Logically it sounds as it does. but where and how is it connected with payroll.
Please revert if you know the solution.
Brs
Kenu.

Hi
In Table V_T77TNM_DC
We need to have the below entries
TNM                                              CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       HRTNM00_REPMOD        CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       MP168400                       CL_HRBAS_INFTY_1684_GUI_FR
TNM       RPCTNM9S_REP            CL_HRTNM_INFTY_1036_GUI_FR
Regards
Kenu

Training and Event Management

Can anyone guide me as how to create Training Events in bulk through SAP? I am getting stuck in all ways.. I am not sure where exactly FIRMLY BOOKED flag is stored coz of which we are not able to develop any programs.. Please guide me if ther is any way available to create Courses in bulk..

Firmly Booked flag is stored in Infotype 1026. If you want to create courses (E) in bulk, use planning Menu (PSVP in Training and Event Management and LSO_PSVP in LSO)
Close the thread if your problem is solved.

Training and Event management.Process Flow..

Hi, Experts,
Can any body give me some notes on Training and event management and process flow also like integration between ECC-6.0 to Non SAP
1.Training request
2.Appraisal documents for performance feedback
3.Tracking Feedback processes
Pls help me in configuring these services.
With Regards,
San Rao.

Hi san rao,
as per your reply you using the new appraisal template and also you have released the template now simply run the BSP application HAP_DOCUMENT and access the appraisal documents
attach these BSP applications in your portal system.
following pages of the above application will be help full
documents_todo
documents_received_open2
documents_where_participated
Regards,
Umesh Chaudhari.

Appraisal for Training and Event Management

Hi Friends,
Hope every one doing well.
I have a requirement regarding the Appraisal of Attendee and send to its reporting manager for review and Manger may change the rating and completed or reject for re-appraise from the attendee.
Note: We are not using LSO, using old Training and event management and we don't have any ESS,MSS system simply doing in ECC system only.
here i need the notification for the reporting manager once the attendee save his ratings, if i do with old appraisal functionality with APPCREATE & APPCHANGE system is not giving any notifications to the reporting manager.
if i go to new appraisal system that is with PHAP_CATALOG and PHAP_ADMIN i am not able to get the course's what employee attended for the training.
please can any one share your view how to do this.
using BS - Appraisal Model
BG - Criteria Group
BK - Criterion
Thanks in advance,
Best Regards,
Praneeth kumar

Thanks for your suggestions.
i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS. appraisal has to done in the ECC only.
Done the customization like this :
created scales
created appraisal model and assign the scales
for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
Now Appraiser (Manager) from APPCHANGE complete the appraisal.
now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
Please help in this requirement.
Thanks and Best Regards,
Praneeth kumar

Migrating Training and Event Management...

I need to migrate between two systems, both structural content and participants of Training and Event Management and is wondering if anyone can help me as to how to go about doing so? Do there exist standard IDOCs and programs/function module to do so?

Hi,
i think you could use message type hrmd_a.
How to configure ALE
is described in this docu HR special
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEHR/CABFAAL
EHR_ALE_QS.pdf
or in this genral
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
Hope this helps.
Regards
Bernd

Workflows in HR: Training and Event Management (BO PDRELA_025)

Hi expert!
I have a problem in the context of SAP HCM Training and Event Management and the generation of a workflow event for BO PDRELA_025!
I have created entries in table T779X (through SWEHR3) as:
E 1001 A025 * BOKF 0 PDRELA_025 REQUESTED
E 1001 A025 * BOKP 0 PDRELA_025 REQUESTED
E 1001 A025 * BOKW 0 PDRELA_025 REQUESTED
E 1001 A025 * CNOW 0 PDRELA_025 DELETEREQUESTED
E 1001 A025 * CPRB 0 PDRELA_025 DELETEREQUESTED
...but as soon as it calls function RH_OBJECTKEY_BUILD, it fails and doesn't create the REQUESTED event.
As the key field for AttendeeID in object PDRELA_025 references OBJEC-REALO, function RH_OBJECTKEY_BUILD tries to find a corresponding field in structure PPKEY to create the object key. As it can't find this field in PPKEY, it fails and doesn't create the REQUESTED event. Is there something I've done wrong?
Can anybody help me please?
Michael

Hi Rick,
Thank you for your help.
The problem occurs in function module RH_OBJECTKEY_BUILD. Following raise is the problem.
    loop at bor_keyfields where bor_object_type = bor_object_type.
      read table structure_key with key
                               fieldname = bor_keyfields-reffield
                               binary search.
      if sy-subrc = 0.
        bor_objectkey+bor_keyfields-offset(bor_keyfields-ddlength) =
        hr_record_key+structure_key-offset(structure_key-leng).
      else.
*     FATAL ERROR!!!! BusObjectKey do not refer Infotypekey of DDIC!!!
        raise problem_to_build_borkey.*
      endif.
    endloop.
If found SAPNote 1066444 but the recommanted SP is already imported?!
Can you help me??

Using a field as the Event Organizer in Training and Event Management

hello
I want to add field as Event Organizer in Training and Event Management and i use this doc
http://scn.sap.com/docs/DOC-53028#comment-512784
field added but data dosen't save, when I change combox data I could n't see data
for example I add filed max_houre and save 10 ,after save I selected orgnaize unit and save another data,my pervious data in max houre lost!!!!!!

hello
I want to add field as Event Organizer in Training and Event Management and i use this doc
http://scn.sap.com/docs/DOC-53028#comment-512784
field added but data dosen't save, when I change combox data I could n't see data
for example I add filed max_houre and save 10 ,after save I selected orgnaize unit and save another data,my pervious data in max houre lost!!!!!!

Configuration documents for Training and event management &apprisals?

hello xperts
can anyone forward me configuration documents for treaining and event management and apprisal? to [email protected]

Thanks for your suggestions.
i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS. appraisal has to done in the ECC only.
Done the customization like this :
created scales
created appraisal model and assign the scales
for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
Now Appraiser (Manager) from APPCHANGE complete the appraisal.
now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
Please help in this requirement.
Thanks and Best Regards,
Praneeth kumar

Training & Event Management - Billing - One Time customer

Hi All,
Would anybody be able to help us with the below scenarios, Thanks in advance for the help.
1. How do, I do Billing in Training & event management?
2. Can we have more than 1 one time customer for different departments in training & event management. if yes, what would be the process?
3. Integration table _T77S0,_ have only 1 one time customer as integration between training & event management and sales & distribution, but if we assign different one time customer at Attendee level, there is a confilict, how we can assing different one time customer for different attendees( say department wise)?
Thanking you.

Hi,
One time customer itself means that there is no regular transactions with this customer, so that is why a generic account is created for such customer and the transaction for various one time customers posted with such generic account.
The credit check is not relevant to the one time customer.
Regards,
Gaurav

Training n event management and pd

Similar Messages

Maybe you are looking for