Traktor 3.3 & SB Live 24-bit External in Windows Vista, Problem sol

Hi!, I'm from Mexico, I'm a dj, ok, few hours ago, I solved the poblem with my SB Li've External in Traktor 3.3 of NI, I use Windows vista in my tablet PC, and when I boutght it, Traktor never show me the 5. channels... I think the problem is with the driver for windows vista, one week ago I recovered my tablet and I install Windows XP, but my AMD Turion 64X2 runs bad the traktor 3.3, today I decided to install my SB Li've in W. Vista, again, And?I decided USE THE XP DRIVER CD, I had't installed any software of music in my PC, only the traktor 3.3, when I?trying to set the Audio COnfiguration in traktor I find one?option in Audio Device: ASIO4ALL v2,?and others options.the most unusual is that de option ASIO4ALL had't show me before. ok but this option allows us to use 8 outs of the SB Li've , & 2 for?front, ....etc. the last 2 outs (7 and 8), I thing that?are for the Digital Output(please confirm me it). I don't know how my?PC detected that option in traktor, I had another SB Li've External, & make the same steps & never show me that. my?NEW SB Li've Ext. I boutght it'stoday, I don't see any?unlike. Fortunately for me?traktor & SB LIVE Ext. runs great in Windows Vista. . maybe the XP Driver CD is new, I don't know! (for these news steps I never install the VISTS Driver CD).
When you configure Ur traktor Outputs, select ASIO4ALL and push the Control Panel button, Traktor will run another windows with many options.
I use this options in my PC (if U recommend me other please tell me):
Audio Device: ASIO4ALL
Sample Rate: 4400 hz
Audio Latency: 23.ms (configured in ASIO4ALL control panel)
------in ASIO4ALL control panel:
.-Select SB LIVE 24-bit Ext. and clic on enable button. if there are other please disable it.
2.- mark Always Resample at 44. Khz <-> 48 Khz, and force WDM Driver to 6 bit (optional)
?clic on exit.
go to output routing, and U will find the 8 outputs.
Note: in ASIO4ALL control panel I see a web page for support, cheak it: www.asio4all.com, maybe U will find more options.
I hope this hel
ps.
with my first SB LIve I visit this forum and many people have the same problem. . good Luck! and happy Mixes.
for questions please contact me:
[url=mailto:[email protected]">mortal_csw@hotm ail.com[/url]
www.trancemx.com
And Sorry for my bad english jaja. BYE!

ok, in output routing you will find all options to configure your outputs, for the cue?monitors select 2 outputs of the SB Li've, in my setup I have?3 &?4 outputs (C/Sub estereo output), for master I have & 2 (Front), & for Booth 5 & 6 (Rear). maybe your problem is that you have not?deactivated your old sound card, and haven't enable the SB Li've, U can use both at the same time, and get more outputs . U can configure Ur outputs?as U Like, if U use a external Mixer with 2 or 4 channels, select in output routing - mixer mode "External" and send the channels A, B, C & D in a specific?output. good Luck

Similar Messages

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

First off your operating system version is obsolete and not being updated for security issues from Apple.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
So at least you need to upgrade to 10.6.8, and that will make your machine secure again.
However if you decide to upgrade further to 10.7 or 10.8, be forewarned your PPC based software of old is not going to work any longer. and your machine may require more RAM.
Check here to see and download the free MacTracker to see your machines true RAM potential and specs. There are videos online at YouTube, it's really easy to install yourself.
http://roaringapps.com/apps:table
I checked out the z-5500, apprantly the optical out shouldn't be a problem, however the surround sound decoding is a problem as the Mac doesn't do it, just passes it through for decoding on a receiver via the optical out port if your Mac has one.
Use the free MacTracker to find out or when you upgrade OS X, there is a option in the System Preferences > Sound.
https://logitech-en-ap.custhelp.com/app/answers/detail/a_id/9693/section/trouble shoot/crid/409/lt_product_id/224/tabs/1,3,2,4,5/cl/sg,en
The Sound Blaster Live 24 bit doesn't do Dolby 5.1 according to Wikipedia. More info on it is here.
http://support.creative.com/Products/ProductDetails.aspx?catID=1&prodID=10702&pr odName=Live!%2024-bit%20External&CatName=Sound+Blaster
If it's able to accept optical toslink cable from the Mac's toslink stereo mini port (if it has optical output) and then send that to the z-5500 via the analog speakers, then you should be fine.
I'm afraid you'll have to do some more digging to get it to work.
The only surround sound your going to get is by playing DVD movies that have it, then it can't have Dolby 5.1 as the Live 24 bit can't decode it.
So do your research on what surround sound formats the Live 24 can decode, then compare your DVD collection for those movies that have it, then get it all connected and enable it on the movie preferences at the menu.
Good Luck

"iTunes 7.6 or later is supported with any 64-bit edition of Windows Vista.

"iTunes 7.6 or later is supported with any 64-bit edition of Windows Vista. The installer for 64-bit Vista is named iTunes64Setup.exe instead of iTunesSetup.exe. For more information see http://docs.info.apple.com/article.html?artnum=301301"
So now you iPod Shuffles will work! No more returning them to Apple!

I can now setup iTunes on my 64 bit Windows Vista. I've also brought over my library via the home network from my old Windows XP computer (although I needed to use Add folder to Library as the songs were not automatically recognised in the library). However, I can't get the i-Pod to load. At first I got a message saying that I needed to download a driver and now there is no recognition of the iPod at all when I connect. Is there anything I can do?

SB live 24 bit external most features won't run on my new compu

<font face="Century" size="4">I need? advice how? to enable all features of? the SB 24 bit external card on my new computer., i just? get sound? from 6? channel setting on decoder but not? features of the card its? self, nor? digital

You should probably just download the trial version of pse 12 and see if you can live with it.
Download a free trial or buy Adobe products | Adobe downloads
That being said, have you tried to install pse 1 on your computer?
How much free space is on your hard drive?
Do you have Internet Explorer 10 or 11?
Pse 1 can run on windows 7 x64, provided certain conditions are met.

Sound Blaster live 24-bit external hardward possible quick

i have a?Sound Blaster li've 24-bit external, it worked without any problems, accept slowing my computer down, but i only have 256 Ram and .4 GHZ CPU, so it wasn't a surprise. But then, the clips that hold the USB port in place came loose. They didn't break. They just came loose. The result being that?the port is back inside the card itself. Everything still looks just fine, but i can't get the?USB port to stay still so i can plug the cord into it. So I'm wondering if using a little glue,?or some kind of torch, might harm the device. Because I'm fairly certain the warranty is voided(cause it looks a little ruffed up), and i don't feel like paying shipping, repair, and all that, so i don't want to send it back, but there is a chance that it hasn't. Any advice is welcome. Oh and if any CL people are?reading this, the sound card was magical before the clips came loose, you guys rock!

that problem got fixed, but now there's another. every time i plug it into my computer, it says that 'there has been a power surge on USB hub' and then i have to reset the port and remove the cable. i tried looking on the database, anybody got any ideas?

Installation CD for Creative Sound Blaster Live 24-bit External SB0490

Hi,
I've bought this old external soundcard without the original installation CD, because I thought I can download all needed software here on the creative site. But no, only the drivers and some simple program updates are available :-(. With the creative drivers installed, I only get hacked sound on the digital coax output, SPDIF is also not working correctly. I suppose I have to do some configuration in the creative suite software, but this suite can only be installed from the original installation CD...
Is here somebody who can tell me where I can download an ISO of this CD or perhaps make an upload of it?
Kind Regards
Steven

HRe: Sound Blaster Li've! 24-bit External (SB0490) choppy background sound? I've been having the same problem with mine. ?At first, all it would take is unplug the laptop end of the USB, wait a second, then plug it back in. ?A sound (incoming mail, reminder, general Windows sound) had to initiate the sound. ?It's almost like a CD skipping, but the sound played has no bearing on the popping sound. ?It's always the same pitch, timing, etc. no matter the sound that caused it.
I've blue screened a couple of times too over the past couple of weeks. ?I've only been able to catch 'USB' during the blue screen before it reboots, so I don't have a code number to chase down.
I'm using Windows Vista Premium Edition on a Gateway laptop that's about two years old. ?I'm being lazy, and not looking, but I'm pretty sure it's got a .6GHz DualCore proc, I upped the RAM to 2GB, I had to replace the HDD and I honestly don't recall the brand.
It's gotten to the point now that even unplugging and then replugging doesn't really affect it anymore. ?I know that I've updated the driver a couple of times. ?The first time Vista whined about it. ?Going to see if there's a more current version, but I don't really have any further help or suggestions.
Hopefully something will come up.

SB Live 5.1 Platinum- The LIVE Drive2 Not Working On Windows Vista 32

SB Li've 5. Platinum- The? LIVE Dri've2 Not Working On Windows Vista 32BIT?i need halp?tnks

You mean you get audio at all??Heh. I did hear of Windows Update giving some sort of 2. sound so maybe that's what you have. Since Creative isn't going to do any work on the old Li've series (non-24bit), I suggest you try the latest beta kXProject drivers from the driverheaven.net kXProject forum. 3538l is Windows Vista compatible. Just install it with UAC turned off. Don't know how much is working, but it's possible that your Li'veDri've is one of the things. See for yourself. Better than the basic Microsoft implementation, especially for your 5. speaker support.

Windows 7 32-bit Upgraded from Windows Vista

Hello Everyone
I have a Satellite A500-15M, with a Windows 7 32-bit running on it which was upgraded from Windows Vista 32-bit by an upgrade DVD from Toshiba sent to me in January.
I need to have my Windows 7 as 64-bit instead of 32-bit. I have been searching on the internet about this matter, and I have discovered that I cannot do this unless I have a fresh copy of Windows, but the only disks that I have are the Windows Vista RECOVERY DVDs, and the Windows 7 Upgrade DVD.
Is it possible to have a fresh copy of Windows Vista 64-bit from my Revocery DVDs, then upgrade to Windows 7? Or do I need a Windows 64-Bit DVD?
I really appreciate your cooperation.
Kind Regards,
Ala'

Hello
According notebook specification your notebook was delivered with Vista 32bit and 64bit dual boot.
If you have created recovery discs it will be interesting to know how many DVD disc you have.
For instance on my Satellite A500-157 I have 4 DVD discs. With other words I have recovery discs for 32 and 64bit Vista. When you start first DVD you will be asked which version you want to install.
Please check if this works with your recovery discs too.
If you have this option install Vista 64bit on your notebook and later use upgrade DVD and try to upgrade it to Win7 64bit.
Please test it and let me know if this works for you.
Depending on your answer we will search next solution for you.

5.1 support through SPDIF on SB Live 24 bit extern

Is it possible to get 5. surround out of movies with this adapter?
Do I need an appropriate driver (other than what comes in the box)?
Do I need a particular software DVD player?
Thanks.

Win2003 is a better WinXP with Server- features and very expensi've. So u will be able to use WinXP drivers on your maybe "illegal" copy of?Win2003. ? You must enable hardware- acceleration in windows audio- configuration tab (even if your soundcards doenst support it) In Win2003 it is disabled by default. Because win2003 is not a toy. HF

SB Live 24-bit! Internal (BULK),having problems with "some" sou

excuse me for my bad english,i have a problem with my soundblaster 24-bit! Internal BULK.
its playing all the music and sounds alright but there some sounds who make scratching noises.in soulreaver its the intro music and in battlefield 2 its the sounds of the jets turbines.in wow its the sounds of the specialmoves ...
mp3 and movies play without any sounderror,the games too just thes few sounds and music tracks are scratching but i can hear the sound clear too.
any help would be great,
thx spike383
edit:
MSI K8N Neo2 Platinum Nforce 3 Ultra (Drivers 5.0)
AMD 64bit 3000+ Socket 939 Winchester (Arctic 64)
024MB KingstonValueRam 400mhz (cl2.5)jaja i no i no...
--(changing to 2048MB Corsair XMS(DDR400, CMX024-3200C2)-- ^^
Gainward Ultra 2400/GS GLH (400/200-NVSilencer.5.rev2) Forceware 77.30
Sounblaster Li've 24-bit! 7.DD Internal (BULK)
Sharkoon Silentstorm 370w PSU
Thermaltake Soprano.Message Edited by Spike83 on 07-08-2005 05:08 AMMessage Edited by Spike83 on 07-08-2005 05:34 AM

well doesnt any know how to help me out,not even the ppl from creative ?
i noticed all the companys are lame and sleepy nothing doin ppl,like gainward
or benq these su** too.any help would be nice dont just sell **bleep** creative help
ur customers too it would be nice.the system was formated be4 i installed all the software,ac97 controlle was turned off in bios but the sounds scratch in some
sounds and music files,not in all tho.so what can i do!?

External trackpad windows 8 problems

I know this has been discussed, but I'm having trouble finding the solution.
I'm typing this on my external bluetooth keyboard and external trackpad on my Macbook Pro Retina.
The things I can not do on my external trackpad
right mouse
two finger scroll
I know trackpad++ does not work on external trackpad (sadly because I use that on the internal trackpad and it works great)
Thanks for any help.

Wondering if 18 views and no response means that this feature does not work.

External Drive and Vista problems

I recently got an external drive with the intentions of keeping my iTunes library on it. So far I have had nothing but problems. In the advance prefs. I set the music folder location to my external drive. To test it, I would rip a CD to iTunes (which is installed on the C drive). Sure enough, the library would be in the folder that I designated it in the ex. drive. My problem is that when I open iTunes, it creates a folder under Music on the C drive which contains the library with the ripped CD. Whats the point of putting it on an ex. drive if it automatically puts it in a folder on my computer? Its frustrating because I set the path of the library to my ex. drive. Why is it also putting a copy of the library on my computer under a music folder? Is it a "Vista" thing or an iTunes problem? I need to get this sorted out because I would eventually like to put my whole library (backed up onto discs) into the library only on my external drive before I purchase a new iPod soon. I dont want any music on my C drive because I need the space.

You know what? I figured this out myself the next day with a solution that I haven't seen anywhere else. I understood all the operations of consolidating libraries to seperate drives, but what was creating the problem was vista's fantastic ability to stick anything ripped into the owner/music folder despite where the library path is pointed. The answer was so obvious and simple. I went into the advanced prefs. and changed the library path back to the default owner/music folder. Then I right clicked the owner/music short cut in the start menu, selected properties and made the whole "my music" folder located on the external drive. Now when I plug in my external drive and open windows, the library is pulled from the music folder on the external drive and runs like normal. When I remove the drive and open iTunes, it gives me an error that the library cant be found. When I right click properties on the music icon in the start menu, it says it takes up zero bytes, which is exactly what I want. Its funny how I utilized the problem to get what I wanted.

Sound blaster 24 bit external (cracking)

Hey guys, i've recently reinstalled my 24 bit sound blaster as i noticed there was an update to make it compatible with windows 7. It's kinda working fine but my front left speaker is cracking/sometimes not playing at all. Any suggestions?
Also when i do the surround test my front left speaker is VERY quiet compared to the rest. Thanks

Hi.
Creative as an Audio Center to download for sb live 24 external soundcard, and they say this application restores the Line in monitoring function (that's what you want).
But it doesn't work!!!
I had the same issues and here is Creatives support team reply to my emails:
"Our Advance Support Group has confirmed that the Line in Monitoring
feature isn't supported under Vista with Live 24 Bit External.
Sorry for the inconvenience caused."
So my solution was to give up Windows Vista and install Windows XP on my laptop.

How to add Live Type in the external editor windows?

I was just refreshing myself by one of the FCP dvds from magent media where Even Schechtman show his window of External Editors in System Settings.
I have the latest FCP version but that line which reads "Live Type" in external editor window is missing. Though he didnt discuss anything on the dvd but made me curious of my observation.
How Can I add Live Type message box which can be checked in External editor Window?
Thanks

This is something specific to FCP4.x ... it does not appear in FCP5.x
Final Cut Pro HD: LiveType does not appear in the External Editors tab
Under some circumstances, the External Editors tab (choose Final Cut Pro HD > System Settings) in Final Cut Pro HD does not display a setting for "LiveType Movie Files."
This can happen if you installed Final Cut Pro HD from a new Final Cut Pro HD disc, as opposed to installing it from an upgrade. If you upgraded from Final Cut Pro 4 to Final Cut Pro HD, you will not have this issue. If you upgraded from an earlier version of Final Cut Pro using an upgrade disc, you will not have this issue.
You can still add LiveType files to the timeline even if LiveType does not appear in the External Editors tab. The behavior may be slightly different, depending on whether you add a LiveType project file or a LiveType movie file to the Timeline.
If you add a LiveType project file (for example, MyProject.ipr) to the Timeline and then choose to open it in an External Editor, the file will open automatically in LiveType as a LiveType project.
If you add a rendered LiveType movie file to the Timeline and then choose to open it in an External Editor, the file will open in the Editor you've selected for Video Files (in the External Editors tab) or in QuickTime Player if none is selected.
In summary, "LiveType Movie Files," only appears if you upgrade to Final Cut Pro HD from an earlier version of Final Cut Pro 4. It is not required in the External Editors beacuse a LiveType project file will automatically open in the LiveType application and a movie rendered from LiveType will automatically open in QT Player.
http://docs.info.apple.com/article.html?artnum=300451

Help I need to locate a driver for my soundblaster live 24 bit soundcard

My son has been given the following PC games for christmas:-
Command & Conquer 3,
Command & Conquer Red Alert 3,
Arma; Armed Assault,
Medal of Honour: Airborne
The problem he is having installing these 4 games is this. About half way through installation an error message appears that quite simply states "The software you are installing does not bear a WHQL signed driver. This software will not be installed".
The PC we are running is a Dell Dimension 900, that we purchased about 4 years ago, and it was bespoke.
I have run DxDiagnostics and it tells me that the driver for the graphics card is called p7.sys and the sound card are not WHQL logo'd, so how the hell do i download a driver for my soundblaster Li've 24 bit, that does? bear a digital signatre that is WHQL Logo'd. I hope you can help, me please.
Message Edited by simonwicker on 2-26-2008 2:9 PMMessage Edited by simonwicker on 2-26-2008 2:25 [email protected]

Re: Help I need to locate a driver for my soundblaster li've 24 bit soundcard? I guess you and your son are currently using windows xp. Well, what you can do is now is ignoring the WQHL pop-up window and choose the "install anyway" option during the installation of the soundcard driver, since WQHL only means the driver is tested by Microsoft and nothing more; drivers without the WQHL qualification does not mean they are bad drivers, they usually works as good as the WQHL ones.
Ofcourse you can also download the official drivers for the mentioned Soundblaster li've 24bit at Creative Labs support/download site.
here is it:
[url="http://uk.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=035&dlcentric= 025&Product_Name=Li've%2+24-bit&filetype=&OSName=Windows+XP">Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077 (63.39 MB)?[/url]
The driver is for all Soundblaster Audigy Value, SE, LS and Soundblaster Li've 24bit, since they are all based on the CA-006 soundchip (with other words Creative Labs renamed the soundcard several times). Also this driver should be WQHL-ed (if not, choose "install anyway" option during installation of the soundcard driver). Make sure you have uninstalled the older driver before installing the new one. For troubleshooting use utilies like "Driver Cleaner" or "Driver Sweeper" (google for Guru3D and go to the site and their download section to get the utilities/tools) to clean up the junk files of the older driver that are left in the Windows OS.
Good luck and Merry Christmas!!!
Message Edited by CTman on 2-26-2008 0:2 [email protected]

Traktor 3.3 & SB Live 24-bit External in Windows Vista, Problem sol

Similar Messages

Maybe you are looking for