Trancode burn hangs/crashes in Encore CS5 but works fine in CS4

Hi,
I've been reading lots of stuff in the threads about Encore CS5 crashing at various times, and I wanted to see if someone could shed some light on my circumstances..
Windows 7, LG Blu-ray burner, everything always worked fine in CS4.
I had been using Encore CS4 to burn my Premier CS5 projects because I couldn't ever get Encore CS5 to work prior to the latest update..
I did a new project in CS5 and when I did a rough cut burn it worked ok..
Since then, no joy.. It imports it from PP to Encore (CS5) and starts rolling, but then seems to freeze along the way in transcoding and crash. If I load the same project saved by Encore CS5 and try burning to blu-ray in CS4 it transcodes, burns and works.. So it does seem to be some difference between Encore CS4 and CS5. I really want CS5 to work for the promise of not needing to transcode AVCHD, and make it look worse
Couple of things to note that may or may not matter:
I read somewhere that "blank space in the timeline" crashes Encore CS5 .. I mean really? I have a couple of gaps of black in the timeline when I switch sections, but this never caused a problem before, and this seems like a bug that Adobe just couldn't have could they? For real?
I have both CS4 and CS5 installed. Does this matter? I haven't uninstalled yet, because CS4 works, and CS5 doesn't.
I have a GTX 295 (not the 285 and I did the "hack" to load and take advantage of the GPU's with the mercury engine). Everything in Premier CS5 seems to work fine, but admittedly, the one time I did get Encore CS5 to work, this was not in enabled and now it is.. Could this really matter?
Right after I post this I'll be doing that roxio update thing, but I have a pretty fresh copy of Win 7, totally updated that I the only thing I do with it is use it for Premier, so the point is I don't have a bunch of junk installed and use to for all sorts of other stuff.
I really want to fix this because I have noticed that after CS4 transcodes and I burn the blu-ray, it doesn't seem to look as good.. And since nearly all my footage is in AVCHD, and it wouldn't need to transcode it, this not only saves time, it probably looks better, so this would be a super powerful feature of Encore CS5 I really want to take advantage of..
Any ideas?

Thanks for the tips..
I changed every file including the name of the project to have no spaces.. I also don't have any breaks in my sequence, I'm not using a timeline, I'm just importing the sequence straight into Encore...
I don't think the GTX 295 thing could be related the only issues I'm having are in Encore, not Premier Pro..
But I guess the news now is that everything seems to be working pretty well and it looks to be transcoding, but I keep getting a:
"Blu-ray Object: Sequence 01/Cozumel_2010.prproj, Export file not found"
The Sequence part is obviously the name of my project file..
I've been trying to read about why this would come up, but no one seems to have an simple answer.. I've cleaned the media cache and renamed the project, but the old project name gets the same error..
And here is the point, as stated before, I open the exact same Encore project in Encore CS4, and bingo everything works..
D.J.

Similar Messages

  • Url link with target="_blank" hangs in Internet Explorer 7 BUT works fine in IE6, FF, Safari?

    Okay, so I have a SWF embedded on a page, which has a link to a target="_blank" url, and it works in every other browser, INCLUDING the notorious ie6, but NOT in IE7?
    IE7 just opens a blank page (without the address in the address field) and displays 'connecting...' and stays there forever.
    • I even manually typed in the adress of the site I'm trying to access with the link, and the page opened just fine in IE7.
    But when I click on the link from the SWF, it hangs again and doesn't open. I manually typed in both addresses with and without the 'www' (i.e. http://somewebsite.com and http://www.somewebsite.com) and both opened in IE7.
    But the link from the SWF ONLY opens a blank page with the 'connecting...' and stays there forever.
    • I feel like it was working previously, but I could be wrong. Besides that, it is working in ie6, of all things. So I don't get it?
    • This also happens with other website that have a link with target="_blank" in IE7, so it's not only my site.
    As always any leads are greatly appreciated.
    Site with the SWF with the link with target="_blank":
    http://solarinkgraphics.com/web.htm          • clicking on the IMAGE or the "ENLARGE" link should take you to a target="blank" url
    Site it should go to:
    http://thehoneymoonphase.com

    adobe1kenobe066 wrote:
    Site with the SWF with the link with target="_blank":
    http://solarinkgraphics.com/web.htm          • clicking on the IMAGE or the "ENLARGE" link should take you to a target="blank" url
    Site it should go to:
    http://thehoneymoonphase.com
    First off that first link to the graphics site does not work.  Getting a page not found error.  Although I was able to do a quick lucky guess and added an "l" to the end of the address and it worked.
    Second, because the link is embedded within a Flash document, your problem will lie within the ActionScript code as opposed to the HTML.  Thus you would be better off posting this in the Flash forum with your ActionScript code to get better troubleshooting responses.
    http://forums.adobe.com/community/flash

  • My drive crashed. Re-installed CS5. Works fine except that can no longer go from Bridge by clicking

    My drive crashed. Re-installed CS5. Works fine except that can no longer go from Bridge by clicking on small photo there. I found the place to change but CS5 is not an option. Tried to change prefernce in Windows 8 but not there either.

    Thanks.  Before my re-installation if I was in Bridge and found a photo I wanted to edit in CS5 I would just double click it and it would be brought in.  Now when I do this I am brought into a microsoft viewer. To edit a picture I found in Bridge I have to write down its name and directory, open up CS5 (if it is not) and navigate to the photo.  I found the place in Photshop and Bridge where you are supposed to be able to change the default program invoked when you double click on a photo in Bridge but there is no choice given other than the Microsoft viewer.  Any help you can give would be greatly appreciated.  At some point some web site I was reading suggested the problem being related to CS5 failing to make some change in the registry when it installed? This, or its solution is beyond my ken... Thanks, RobStl

  • Problem unlocking CUDA in CS6 , but works fine in CS5

    I installed CS6 which was fast and painless into my programs directry G( aslo where CS5 is installed):, add my card (GTX465)  and linked the PPRO EXE in the nvida settings and made it compatable. Then launch CS6 , which was much faster than CS5 loading up. Settup a new Project and went to the general progect settings, to set the ME Hardware play back settings, I could not change it from software to hardware. I have tried to do this and redo the settings still does not work.
    I uninstalled CS6  and reinstalled cs6 as a default C: I also down loaded the patching program from www.studio1productions which unlocks all the geforce cuda card ,everything seems to work , till i launch CS6 , I am still not able to set CS6 to Hardware Render Play back , CS5 still works fine and i am able to set ME in CS5 but not CS6.
    What am I missing or diong wrong?
    Please help .......Harm ,Bill............

    I am having the same problem just downloaded the latest nvidia driver but After does not see the cuda
    Fast Draft:
    Available
    Texture Memory:
    400.00 MB
    Ray-tracing:
    CPU
    (GPU not available - incompatible device or display driver)
    OpenGL
    Vendor:
    NVIDIA Corporation
    Device:
    GeForce GTX 560 Ti/PCIe/SSE2
    Version:
    3.0.0
    Total Memory:
    1.20 GB
    Shader Model:
    4.0 or later
    CUDA
    Driver Version:
    Devices:
    Current Usable Memory:
    Maximum Usable Memory:

  • HT1414 touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod

    touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

    Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

    Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

  • Superdrive no longer recognizes CD, but works fine with DVD

    my Superdrive seems to have a problem recognizing any type of CD media, but works fine with DVD media.
    I reinstalled Leopard and still the same problem. I also zapped the NVRAM (this is an Intel 2.0 Ghz Mac Mini w/ 2 GB Ram.
    Is there anything else I can do or do I just need to replace the drive?

    Typically when this sort of symptom appears, it relates to a hardware failure, either due to a faulty lens, or dirt. You might try a lens cleaner to ensure it is not the latter.
    Since this is a 2.0GHz mini, it ought to be still under warranty - if that is the case it would be wise to have Apple, or an approved service provider, check it and undertake any necessary repairs.

  • People picker is not working for ie11 but working fine for other lower version

    i am using sharepoint 2010 and windows authentication
    recently i have updated my ie to ie11 and problem goes here.
    when i try to select from people picker, there are an unexpected error happened 
    however when i use other ie version, people picker work fine, what goes wrong?
    i have already added my system as trusted site
    if there any others thing i miss out?

    Hi,
    According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
    IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
    first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
    add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
    add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
    You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • BPEL process fails in SOA (in UNIX), but works fine in SOA (in Windows) env

    Hello,
    BPEL process fails in SOA (in UNIX), but works fine in SOA (in Windows) environment
    Step 1: Build a asynchronous BPEL process which has no extra node. Make and deploy it in 'local windows desktop SOA' server
    The BPEL process has three nodes:
    a. client - on the left side of the swim lane
    b. receiveInput - first node in swim lane (client calls 'receiveInput')
    c. callbackClient - second and last node in the swim lane ('callbackClient' calls client)
    Step 2: Go to BPEL console and 'Initiate' the BPEL process -> 'Post XML Message'
    Step 3: Now, I can see the successfully completed BPEL instance in the BPEL console.
    Now,
    Step 4: Deploy the same BPEL process (dummy asynchronous) in the SOA server (hosted in unix box)
    Step 5: Go to BPEL console and 'Initiate' the BPEL process -> 'Post XML Message'
    Step 6: I find that the BPEL instance appears to have ended in error (on the second node i.e. callbackClient )
    With the following error message
    +<invalidVariables xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>9710</code>+
    +</part><part name="summary"><summary>Invalid xml document.+
    According to the xml schemas, the xml document is invalid. The reason is: Error::cvc-complex-type.2.4.b: The content of element 'DummyBPELProcessProcessResponse' is not complete. One of '{"http://xmlns.oracle.com/DummyBPELProcess":result}' is expected.
    Please make sure that the xml document is valid against your schemas.
    +</summary>+
    +</part></invalidVariables>+
    Has anyone faced similar issue as above ?
    i.e. process works find in windows environment (local SOA), but fails in SOA server in UNIX environment
    Appreciate your help in understanding this issue.
    Thanks,
    Santhosh

    Hello,
    The fix to this issue appears to have been as follows:
    +<schema attributeFormDefault="unqualified"+
    +     elementFormDefault="qualified"+
    +     targetNamespace="http://xmlns.oracle.com/DummyBPELProcess"+
    +     xmlns="http://www.w3.org/2001/XMLSchema">+
    +     <element name="DummyBPELProcessProcessRequest">+
    +          <complexType>+
    +               <sequence>+
    +                    <element name="input" type="string"/>+
    +               </sequence>+
    +          </complexType>+
    +     </element>+
    +     <element name="DummyBPELProcessProcessResponse">+
    +          <complexType>+
    +               <sequence>+
    +                    <element name="*:result*" type="string"/>+
    +               </sequence>+
    +          </complexType>+
    +     </element>+
    +</schema>+
    In DummyBPELProcess.xsd,
    modifiying "result" to ":result" appears to have resolved the issue in SOA under unix environment.
    If anyone can explain why "result" works in SOA under windows and ":result" works in SOA under unix environment, I would really appreciate your help.
    Thanks,
    Santhosh

  • I just installed CC Lr 5.5 and it will not open on my laptop but works fine on my desktop.

    I just installed CC Lr 5.5 and it will not open on my laptop, but works fine on my desktop.

    Try this:
    https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html

  • I have a Mac running 10.9.2. My wireless mouse with not scroll in mail but works fine in other applications? Any suggestions?

    I have a Mac running 10.9.2. My apple wireless mouse will not scroll in Mail but works fine in other applications.
    Any suggestions?

    First, see this discussion. If the solution suggested there doesn't work for you, continue.
    If you've installed a Mail plugin called "Mail Unread Menu" and you know how to remove it, please do that, then quit and relaunch Mail. Test. Otherwise, see below.
    Back up all data.
    1. Triple-click anywhere in the line below on this page to select it:  
    ~/Library/Mail/Bundles
    Right-click or control-click the highlighted line and select 
    Services ▹ Open
    from the contextual menu.* A folder may open, or you may get an error message that the item can't be found. Either result is normal. If the folder does open and has contents, move the contents to the Desktop. Relaunch Mail and test. If there's no change, put the contents of the folder back and quit Mail again.
    2. Repeat with this line:
    /Library/Mail/Bundles
    This time you may be prompted for your login password when you remove the items. Make sure they're removed from the folder and not just copied to the Desktop. If necessary, copy them first and then move the originals to the Trash.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • TS2972 First night I was able to watch 2 TV shows (45 min each) with no problems, but thereafter programs will not stream without constant pause to buffer. Weather conditions are ideal and my internet comes from crappy hugesnet, but worked fine the first

    First night I was able to watch 2 TV shows (45 min each) with no problems, but thereafter programs will not stream without constant pause to buffer. Weather conditions are ideal and my internet comes from crappy hugesnet, but worked fine the first night.

    The speed may have been ok at that time and is too inconsistent/too slow overall. interference may have proven to be more of an issue since as well. If using public DNS that will provide Intermittant results
    I'm sure using a hotspot would be fine but it depends on your viewing habits. An HD movie is around 4-5GB. It would also be subject to speed. requirements so best to test to see how it compares.
    You would have to check with your Carrier if hotspot it's enabled then just to into your settings and toggle it ON

  • Since I broght Ps6 for Mac, Bridge does not open and crashes. Mini Bridge, however works fine. What should I do?

    Since I broght (in Adobe Store) Ps6 for Mac, Bridge does not open and crashes. Mini Bridge, however works fine. What should I do?

    When I click gelsonhelmoldmacieira1 (me) in the Finder, I do not see the Library:
    The Library (Biblioteca) only appears when I click Macintosh HD:
    Following this path, I add gelsonhelmoldmacieira1 to the others in Photoshop, Bridge and Adobe:
    It seems that something is still wrong. The error message appears again.

  • Newest version of flash player not playing in newest version of google chrome but works fine in IE

    newest version of flash player not playing in newest version of google chrome but works fine in IE

    jennifer.jones214 wrote:
    In your  opinion, should I uninstall Firefox if I am installing Waterfox?
    Waterfox can coexist peacefully with Waterfox.  I have both installed, but never use Firefox any more.
    Not only can Waterfox run in 64-bit address space, it also is better optimized during compile time than Firefox.  (For obvious reasons; Firefox is compatible with many old systems, Waterfox only needs to be compatible with new 64-bit systems.)
    P.S. regarding Chris' advice above; Firefox and Waterfox use the same profile, so if that is actually the problem, then it will occur in both browsers.

  • After updating to iOS 6.0.1 "Yahoo! Server Unavailable" but works fine on iPhone.  Help please!

    after updating to iOS 6.0.1 "Yahoo! Server Unavailable" but works fine on iPhone.  Help please!

    GIve it time. Yahoo has been have persistently random issues in past weeks. If you don't want to wait, you can try deleting and readding your account info.
    The issue is on yahoo's end and all their updates/upgrades.

Maybe you are looking for