Tranfer to new pc. Different root Drives problem

I just got a new comp. Itransfered all my music over the network. On my old Comp. I had all my music in D:/music on my new computer I put it all in a different folder and now I-tunes makes me find all of the songs in the new folder. The only problem is I have thousands of soungs in it and it would take forever. Is there any other way of letting I-tunes know where all my music is now at once? I would delete them all from I-tunes then drag and drop them back in but it seems to mess up everything I organized. Please help. Thanks

Copy \Music\iTunes\ folder from your old user folder on the now external drive to your current \Music\ folder.
Copy all the music files into \Music\iTunes\Media\Music\.
Launch iTunes and see if everything works.

Similar Messages

Slightly different combo drive problem

My problem is a little different from the others I've read about here. Audio CDs and DVDs go in the drive, the drive spins, the drive stops spinning, the disc is not ejected it just doesn't play. Data discs work fine, I just loaded the new iLife and iWork using this drive without any problems.
The drive shows up on the profiler just fine and I've checked all the settings to ensure there are commands for what to do with CDs and DVDs. I ran the disc utility and the drive shows up, I repaired the permissions. I did everything I could find to do.
So, do I have a bad drive like everyone else or could it be something different?
TIA

It probably reverts back to the statement you made. ( I burned some DVD's on another computer).
What other computer?
What software was used to burn?
What Format Disc's were used to do the burn?
All or any one of these can affect your ability to read burned media.
If your combo drive is only capable of reading DVD-R Media then if you put in + or RW Media then there is your problem.
If you burned the DVD on a PC and the software was set to PC only, there is your problem.
Many of the Software on the market give the options to burn and be for PC only, Mac only, or PC & Mac compatible.
I realize that in a perfect world you just put in any media, and it will read and write it. Sorry it isn't the case.
Try to use DVD-R Media, it is the most widely recognised.
http://www.videohelp.com/dvd
Don

New install on new mobo (nVidia chipset): driver problem

I've just installed Arch on my new PC but, for some reason, it doesn't seem to be recognising the hardware, viz. the nVidia MCP67 chipset. Here's the lspci:
00:00.0 RAM memory: nVidia Corporation Unknown device 0547 (rev a2)
00:01.0 ISA bridge: nVidia Corporation Unknown device 0548 (rev a2)
00:01.1 SMBus: nVidia Corporation Unknown device 0542 (rev a2)
00:01.3 Co-processor: nVidia Corporation Unknown device 0543 (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation Unknown device 0561 (rev a2)
00:09.0 IDE interface: nVidia Corporation Unknown device 0550 (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation Unknown device 054c (rev a2)
00:0b.0 PCI bridge: nVidia Corporation Unknown device 0562 (rev a2)
00:0c.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:0d.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:0e.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:0f.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:10.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:11.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
02:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900 GS] (rev a1)
03:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
And here's the lspci from my ubuntu install:
00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0f.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:10.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:11.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
02:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900 GS] (rev a1)
03:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
Can anyone tell me what module I need to load (configure MODULES= in rc.conf) to get it working?
btw, here's the MODULES= stuff from my current rc.conf:
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(e1000e forcedeth slhc snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
Last edited by Shagbag (2008-09-16 17:10:25)

It boots Ubuntu fine. Arch linux doesn't complain either. I only found out about the problem when I tried to pacman -Syu straight after the install - there was no networking. ifconfig had done its job but there was no routing table. I manually added route add default gw 192.168.0.1 and edited /etc/resolv.conf to make sure I could get to my router but, again, it wouldn't work. The forcedeth module had been loaded (ethernet driver) so I took a look at lspci (details in very first post) and can see that it's appears to be an issue with the PCI bus (the ethernet hangs off the PCI bus)I ran hwdetect --modules and pasted the output into /etc/rc.conf and rebooted. Still no joy.
The mobo is an ASRock 939N68PV-GLAN. It has an nVidia chipset (GeForce 7050 NB + nForce 630A MCP SB). From my lspci results it would appear the problem is with the 630A MCP. As Ubuntu works and Arch doesn't I'm perplexed. And yes I've googled and followed what little help there is around. Nothing has worked so far. Hopefully someone will have experienced a problem with either the same mobo or the 630A MCP and they can tell me what needs to be done.
Last edited by Shagbag (2008-09-19 08:50:21)

Problems with installing new itune, different from the problems described.

Ok, so this morning when I was trying to access itunes, it said "error, send error report" or something like that. I retried it several times, but it would not work. So I uninstalled it and installed the new version. Then, I when I was trying to download it, it said something is wrong with my "Windows Installer Package"...and it just skips installing itunes... Please help me, thank you.

Then, I when I was trying to download it, it said something is wrong with my "Windows Installer Package"...and it just skips installing itunes
instead of running the install on line, download and save a copy of the iTunes installer to your hard drive, and run the install from there.
if you still get the message then, could you post back with the precise text of the message?

New OS install on a different hard drive

Hi
First of all, I have a Power Tower Pro 225 with the Newertech G3 processor card.
What I'm trying to do is that I just got the ATTO UL3D SCSI card with two 10K rpm 73GB 68-pin hard drives and I'd like to transfer everything that's in the slow running 2GB 50-pin hard drive to the newer ones. For some reason my Mac is prone to the "finder unexpectedly quit" error. I'm just hoping that it's an old hard drive related error.
In fact, I do have the OS9 CD. What do I need to do in order to reinstall the OS9 to a newer main hard drive without the Mac forcefully restarting from the newer one?
Can I switch back and force between the OS9 with the different hard drives?
Thanks

Hi, synergy2000 -
I did try the Option key but it didn't work.
Many older Macs. including pre-G3 ones (original equipment), can not invoke Startup Manager by holding down Option at the start of booting booting. Reason - since Startup Manager comes up before anything is loaded from a drive, it must be available in the coding of the ROM chip(s) on the logic board. Older machines weren't coded for it.
Is there any other way?
Yes. Use the Startup Disk control panel. Open that control panel, select the volume (and the OS if more than one is on a particular volume, such as both OS 9 and OSX) desired for the next boot, then restart. The machine should boot to that volume.
As noted by Grant, the choice made in Startup Disk will set the boot volume in PRAM, and that choice will remain set in PRAM until it is changed again in Startup Disk. It can also be reset to the internal hard drive on the original bus by resetting (zapping) the PRAM, which resets the PRAM settings to defaults.
Also, how do you duplicate the main hard drive to the second hard drive?
Cloning is not necessary with OS 9. Two ways to do suplicate it -
(1) Open the window for your main hard drive, do a Command-A ("Select All" in Edit menu), then drag the whole collecction over to the icon of the second drive. When that drive's icon highlights (darkens), let go. Finder will copy it all there.
(2) Drag the icon of your main hard drive to the icon of the external drive; when that drive's icon highlights, let go. Finder will copy it there, placing everything into a new folder named the same as the main hard drive. In this case "everything" includes anything left lying around on the Desktop and anything left in the Trash; those items will be placed into new, appropriately named folders inside the folder named the same as the main hard drive.
Once the copying has completed, move the System Folder, Applications (Mac OS 9) folder, Documents folder, and Utilities folder (if it is not in the Applications folder) out of the enclosing folder so they are all at the root level of the drive (visible in the window that opens when you open the drive's icon).
<hr>
In either case, be sure the System Folder is blessed - that it displays the Mac OS glyph superimposed on top of a normal folder icon. Then check in Startup Disk control panel - if the volume you just copied the stuff to is shown, select it and restart, to test/confirm that it is bootable and healthy.
In either case you will probably need to 'fix' one or more aliases. An alias in not much more than an icon and a pathname to the original it represents. When an alias is copied to anywhere, the pathname in it is not corrected. This means that any aliases that had been part of your previous config will still be pointing to the original drive. Fortunately, when you do a Get Info on an alias, there is a button in its Get Info window that allows you to fix its pathname ("Select New Original"). Aliases that may need to be fixed include - one for Sherlock, in the Apple Menu Items folder in System Folder (unless you replaced the one put there by the OS's installer with the app itself); one or more that may be in the Application Support folder in System Folder; and any that you created yourself for your use.

Apple TV worked until today. Message says unsupported signal check your output device. I have checked hdmi cable with another device and it's fine. Put on a different tv and same message. Went out yesterday and bought a new Apple TV and same problem.

Apple TV worked until today. Message says unsupported signal check your output device. I have checked hdmi cable with another device and it's fine. Put on a different tv and same message. Went out yesterday and bought a new Apple TV and same problem.

Which TV do you have.
You may wish to try the following:
Press and hold the menu and the up button simultaneously on the remote for six seconds, the Apple TV should then begin to cycle through the various resolutions available to it at 20 second intervals.. If you see a picture appear up on your screen, use the remote to scroll down to the OK option and select it.

Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!

Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!

I'll stay in this chat ... I answered in the other one ... I have a Sony digital Handycam ... from years ago. I just got the LaCie and I think I formatted it for only to be used on my Mac ... how should I go about reformatting it to be HFS Extended like you said?

DVD drive problems : should I buy the new iMac ?

Hello, being new to these discussions, I don't know if this question was answered before.
My last iMac's DVD drive stopped working after 3 years use. And from reading the discussions, this problem seemed quite common.
But 3 years is not bad, considering the posts talking about the DVD drive not working on NEW iMacs.
Does anybody know if Apple is going to do something about this soon ? My computer is a working tool, and I cannot spend time or money on repairs all the time.
Thank you.
A Mac user since 1985

+"Well, since nobody has an answer, I suppose I will wait until I no longer see the DVD drive problems on the discussions."+
That might be a while. I bought my iMac Oct. 15 and the DVD drive is already not responding. Backing up files, I had burned 2 DVDs from the same package, Toast says this one is a CD-RW and unwritable, and makes a noise like it's trying to eject it but nothing happens. Disk utility says the DVD drive is empty and nothing shows up in the Finder. Using Terminal (drutil eject) and starting up with the mouse button held down makes the same noise as trying to eject it in Toast, with the same results - nothing.
Still trying to find the receipt to take it back & get it repaired. I sure miss the hole for the paper clip.

Move Video clips to an new catalog on different hard drive

I currently have both video & stills in one catalog. I would like to put the video clips into a separate catalog in a different location on a different hard drive. How is this done?

Create your new folder and move your video files into it. Then open Organizer and click:
File à Catalog à New
Give it a new name e.g. MyCatalog2 or Videocatlog etc
Then click File à Get Photos & videos à from Files & Folders
Browse to your new folder on the new hard drive. Press Ctrl+A to select all and click open or get media.
Change back to your previous catalog and delete all the video thumbnails.

Capturing to new external drive - problem

Hi,
I just got a new 500gb Seagate external drive to use as my capture scratch. I'm trying to capture to it and all of my footage is coming out really choppy. If I capture it to my internal drive, it works perfectly fine. Does anyone know what could be causing this problem, or what I could do about it? I'm using FCP 4 with OS 10.4.10. Any help would be appreciated.

Although it may not be a factor in your capture situation, I noticed that you said you are running FCP v. 4 with OSX 10.4.10. I believe FCP 4 was optimized for OSX 10.3. and Quicktime 6.
You might want to avoid future capture and edit problems by reverting back to the systems and apps versions proven to work best with your version of FCP.

Fresco Logic xHC1 (USB3) Root Hub driver problem Code 31

I have the Ideapad S206 Windows 7 32 bit and have a driver problem which I believe is due to a Windows update at sometime. I get the following statement :-
"The device is not working properly because Windows cannot load drivers for this device (Code 31)"
Can someone very kindly please advise me how to sort this out. Apparently uninstalling the driver and then reinstalling does not work.
Jezza

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
Please try updating the following to verify the issue is fixed
Fresco USB 3.0 Driver Win7 USB3.0 Driver (Fresco) Win8
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Adding new raid with different capacity drives on opposite side

hi,
I have an Xserve raid G4 with two sides of 7 bays. Currently one side is filled up with 7 250 gb Apple drives making a 1.37TB raid 5 and the other side is all empty. I just purchased 7 Apple 500gb drives and was wondering if I can combine the 2 sides into one raid 5 or because of the different capacity drives, must I have 2 raid 5s? I am thinking the latter.
(I have done a search for an answer to this question and couldn't find a similar question. So, let me apologize if this is redundant info here.)
Thanks

The two sides are completely independent, so regardless of the size of the drives you cannot combine the drives on the left side in the same hardware-based RAID array with drives on the right hand side.
It is, however, perfectly valid to have an array of 250GB drives on the left, with a separate array of 500GB drives on the right.
That said, once you have two (or more) arrays, you can combine them into a single volume on the desktop using software RAID to concatenate the multiple volumes.
If you decide to install the 500GB drives on the same side to incorporate them in the existing array then they will be treated as 250GB drives and the additional capacity will be lost.

Aperture 3 - new external WD hard drive added -problems with capacity

NO SLEEP...
Just added new 3T WD hard drive per instructions (WD formatted to Mac already/checked ok) and called it Vault #5. All good here, BUT, when adding new Vault #5 into Aperture 3 by clicking "add new vault" it came up as Vault #5 fine, but it says "28.9GB of 1.8TB available" which is incorrect as I've added NO photos (yet). If I go to my desktop and click on the new Vault #5 icon and click "get info" it says I have 3TB available! Why does Vault #5 say "28.9GB of 1.8TB available" when 3TB is available? I need HELP!
I am REALLY stuck on this. I might point out I'm not the most computer savy person out there - PLEASE HELP!!!!!
I have an IMAC Mac OS X 10.6.8 (snow leapord)
THANK YOU!!!

Time Machine will only work on a volume formatted Mac OS Extended (Journaled). If you want to use that WD HDD on a PC as well, you will have to partition it and format one partition for Time Machine and the the other with a common format for Mac and a PC.
Fat32 has a 4 GB file size restriction. ExFAT does not.
Use these instructions to partition the HDD:
osxdaily.com/2011/04/26/partition-hard-drive-mac-os-x/
I am of the opinion that Time machine should have a HDD dedicated solely to it and you should have a separate HDD set up to work on the Mac and a PC. Take into consideration where and how you will back up the data on the PC//Mac volume/drive.
Ciao.

HT4759 I had to change my apple password to fix hard drive problem in my iPhone and now I cannot connect date stored in iCloud as my password has changed. How do I plug in new password to iCloud to be able to retrieve data from my MacBook Pro to my I pho

If you change your apple password how do you notifly icloud to resync everything? Forgot my apple password, had to change it due to hard drive problem on my iphone 4 which had to be totally erased then rebouted and now works but cannot download from my computer/icloud due to password change. So how do I orchestrate the change of password to icloud/computer to allow all to sync together?

If you use Lion, boot into your recovery pressing Command and R buttons, press "Utilities" menu, open Terminal and write:
resetpassword
If you have Snow Leopard, boot into your install DVD pressing C button, click "Utilities" and press Password Reset

HP Color LaserJet 5550 and Tiger (10.4.11) Driver Problem

I have recently acquired a Color LaserJet 5550hdn. I have updated all drivers and firmware available from the HP Website (Printer Driver, 5550 firmware and Jetdirect 610n firmware). The printer has been factory reset/cold reset etc. to purge any previous custom settings. I am using a PowerMac G4 Quicksilver (933mhz) and Mac OS X Tiger (10.4.11). I have made some test prints from both Preview and iPhoto and all have been dark and muddy with respect to colors. I have printed the same images from my wife's PC with HP's PCL 6 Driver for Windows XP and achieve satisfactory results with respect to color (that is to say, without fooling with any color settings in the driver, the image is at least within 10% of the color gamut compared to the screen image). Setting up the printer with the HP Postscript Driver for XP yields similar results as the Mac, dark and muddy colors. So is this a problem with the HP Postscript Driver? Is this a Mac OS X Tiger problem? Do users have color problems with the printer running the Leopard driver?
I previously owned a HP Color LaserJet 8550 (utilizing the same HP Driver for Mac OS X that the 5550 uses) and had default images (no fooling with any color settings in the driver) that were acceptable, again within 10% or less of the screen image color gamut.
I have also downloaded HP's ICC color profiles (CMYK and sRGB) and put them in library/printers/hp/profiles.
With respect to the driver itself, there are two areas in the print dialogue box which seem to have a bearing on color. One is Colorsync and the other is Color Options. Colorsync has two choices ('Standard' and 'In Printer') and I chose 'In Printer' to I assume bypass any Colorsync Conversion. When 'Standard' is chosen the print summary shows the HP Color LaserJet CMYK profile being used. There seems to be no way of changing the default setting in the Colorsync Utility to HP Color LaserJet sRGB. Not sure if it matters as the output for both 'Standard' and 'In Printer' seem to yield the same results. The options under 'Color Options" in the driver under the 'Show Advanced Options' have choices (Basic, Text, Graphics, Photographs, Advanced) and I have played with these to some extent. Although they seem to have some effect on the image, the print is still dark and muddy with respect to colors.
On a final note I have tried a 'GutenPrint' driver to see if it would yield different results.....there was not one for the 5550 so I used a driver for the Color LaserJet 5500......it would only print in grayscale....the resulting image did not look very promising even if it had printed in color.
Insights on any of the above from the community here would be most helpful!
Thanks,
-Ray

This is an update to my own post above. I downloaded the Mac OS 9 driver (yes OS 9!, but the QuickSilver is Dual Boot) for the Color LaerJet 5550 and printed (no changes to any of the driver settings) the same image (photo) as I used in Mac OS X. The image was still dark but not as poor from Mac OS X 10.4.11 (Tiger). Although I prefer not to use color management, I used the Colorsync tab in the driver and chose to match to Colorsync with a generic sRGB output profile (no other settings were changed in the HP color options tab). The resulting image was +/- 5% within the color gamut of the screen image (yeah!!!) In Tiger the options under the Colorsync tab in the driver are 'Standard' or 'In Device' and regardless of the choice, the print result is the same, very dark and muted colors. There is no option for sRGB and if set to 'Standard' the print summary always shows a CMYK profile being utilized. Given that the HP Color LaserJet 5550 is an sRGB printer as per HP, perhaps that is a problem? I would assume the 'In Device' option would bypass Colorsync (since there seems to be no other way to turn it off) and use sRGB, but that does not seem to make a difference in the image being printed.
My good success with an OS 9 driver leads me to believe I have a driver problem in Tiger. However, I have no problems with other printers (HP All in One, DesignJet Color Plotter and wide format Epson inkjet....all of which are older) with respect to poor color output. Given this is a current model in the HP line-up and I believe in service during Mac OS X Tiger, it seems hard to fathom other users do/did not experience a problem.
Again, do Leopard users have a problem with color issues on this printer with default driver settings? Does anyone have driver settings/other insights they could share with respect to Tiger to at least get the print image somewaht close to the screen image? As it stands now, regardless of settings, the printed image is dark with muted colors.
Thnaks to anyone who can respond, even if it is to say they have no problems in Leopard/Snow Leopard as I am upgrading to a new Mac soon.
-Ray

Tranfer to new pc. Different root Drives problem

Similar Messages

Maybe you are looking for