Tranferring data between Mac
I need help in connecting and transferring data (mostly photos) from my old PowerPC 6400/180 to my newer 24" iMac. The 6400 has been upgraded with a G3 processor and runs on OS 9.1. The iMac is running OS 10.4.10. I think I may have a faulty ethernet card on the PowerPC, so I've been trying unsuccessfully to connect it to my router with either a LinkSys USB Network Adaptor(EtherFast 10/100) or a D-Link Wireless USB Adaptor(DWL-122). I'm afraid the USB devices may not be supported or have the necessary drivers to be used on the older PowerPC. My USB memory stick will not work either.
With a recent iMac, you should be able to connect it directly to another Mac (even an older one) using a standard Ethernet cable. Of course, if the Ethernet port on the 6400 is broken, it will not work. But you should try it. Make sure file sharing is turned ON on the 6400. I would use the iMac to look for and connect to the 6400. If it doesn't show up by "browsing," try putting the IP address that is shown in the 6400's TCP/IP control panel into the
Finder>menu>Go>Connect to Server...
window on the iMac, in the field "Server Address:".
If Ethernet does not work... Do you have a .Mac account with Apple? The online storage was recently upgraded to 10GB. Other services (such as your ISP) may also provide online storage. There is a program called Goliath that
http://www.webdav.org/goliath/
that allows access to online storage under the classic Mac OS. If you have such a resource, you could transfer the files there from the 6400 and copy them down from the iMac.
Actually, if your Ethernet does not work, you may not have Internet access (unless you use a modem and dial up). I suppose you could buy a cheap external FireWire or USB (or some have both) case and drop in the hard drive from the 6400 (I think 6400's have IDE drives). Then connect it to the iMac.
Message was edited by: Kenichi Watanabe
Message was edited by: Kenichi Watanabe
Similar Messages
-
Kernel Panic while transfering data between MAC HD and network drives
Kernel Panic while transfering data between MAC HD and network drives. it's an iMAC 24" 2011. Snow Leopard 10.6.8. I can't seem to find the cause to this.Thank you guys !
Here is the log fine with error code:
Error code: 0x0000000000000000
Interval Since Last Panic Report: 5 sec
Panics Since Last Report: 1
Anonymous UUID: 3C5AA43F-D876-4F9D-A831-D8043218C6E0
Tue Aug 16 14:54:46 2011
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f815c6b54, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000005, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0x0000000000000000, RBX: 0xffffff8000000000, RCX: 0x0000000001000000, RDX: 0xffffff8013ae9200
RSP: 0xffffff80de173ea0, RBP: 0xffffff80de173ed0, RSI: 0x0000000000000000, RDI: 0xffffff8013ae9200
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff8016207008, R14: 0xffffff8015a228f8, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f815c6b54, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff80de173b40 : 0xffffff8000204d15
0xffffff80de173c40 : 0xffffff80002d1208
0xffffff80de173d90 : 0xffffff80002e3f4a
0xffffff80de173da0 : 0xffffff7f815c6b54
0xffffff80de173ed0 : 0xffffff80002524fe
0xffffff80de173f00 : 0xffffff8000478c7f
0xffffff80de173f40 : 0xffffff7f8159b158
0xffffff80de173fa0 : 0xffffff80002c8527
Kernel Extensions in backtrace (with dependencies):
com.thursby.kext.cifs(5.1)@0xffffff7f815ae000->0xffffff7f815cffff
dependency: com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000
com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000->0xffffff7f815adfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 105374280984
unloaded kexts:
(none)
loaded kexts:
com.vmware.kext.vmnet 3.1.3
com.vmware.kext.vmioplug 3.1.3
com.vmware.kext.vmci 3.1.3
com.trendmicro.kext.KERedirect 1.0.0
com.trendmicro.kext.filehook 1.5.0
com.vmware.kext.vmx86 3.1.3
com.thursby.kext.cifs 5.1
com.thursby.kext.NetBIOS 5.1
com.apple.filesystems.smbfs 1.6.7 - last loaded 60402747883
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.kext.ATIFramebuffer 6.3.6
com.apple.driver.AppleBluetoothMultitouch 54.3
com.apple.driver.AppleIntelHDGraphics 6.3.6
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.ATIRadeonX3000 6.3.6
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.AirPort.Atheros9388 426.35.3
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.0.46
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB 6.3.6
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver 2.0.5f14
com.apple.driver.IOBluetoothHIDDriver 2.4.5f3
com.apple.driver.AppleMultitouchDriver 207.11
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.AppleThunderboltEDMSink 1.1.1
com.apple.driver.AppleThunderboltEDMSource 1.1.1
com.apple.kext.ATI6000Controller 6.3.6
com.apple.kext.ATISupport 6.3.6
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.AppleThunderboltDPOutAdapter 1.3.2
com.apple.driver.AppleThunderboltDPInAdapter 1.3.2
com.apple.driver.AppleThunderboltDPAdapterFamily 1.3.2
com.apple.driver.AppleThunderboltPCIDownAdapter 1.1.6
com.apple.driver.AppleUSBHIDKeyboard 141.5
com.apple.driver.AppleHIDKeyboard 141.5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.driver.AppleThunderboltNHI 1.2.6
com.apple.iokit.IOThunderboltFamily 1.4.9
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
System Profile:
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 1.71f22
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.35.3
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
Serial ATA Device: OPTIARC DVD RW AD-5690H
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Officejet Pro 8000 A809, 0x03f0 (Hewlett Packard), 0x3612, 0xfd140000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x850b, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfa130000 / 5
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfa132000 / 8
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000 / 6There is something incompatible would be my guess. Did you disconnect all your peripherals in safe mode just to check?
You might now create a new temporary user account. Log into the new account. Do the panics still occur?
I would also visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Sometimes they can be difficult to track down. Looking at each new panic log would help determine if it's cause is associated with the same extensions. -
Transfering data between mac's
Hi,
I have an iMac & a macbook.
How do I transfer a lot of data between the 2?
I take it I buy a firewire to firewire cable.
How do I then go about transfering data.
Many Thanks,
JeffHow do I then go about transfering data.
Connect them and start up one Mac with the T key held down. You can also use file sharing over a FireWire, Ethernet, or wireless connection.
(46692) -
Transferring Data Between Mac & PC
Hi! I've been a PC user all this while and I just got my very first Mac.
I'm wondering if there is a way to share data between my employer's PC and my personal Mac using my external backup drive. The HDD I currently have is formatted in NTFS and it does not allow me to transfer data from my Mac.
I do a lot of work at home and while I'm overseas and I need to read/ write from both computers very regularly.
Please help.I'm looking to switch from a PC to a Mac, and all of my data is on two external NTFS hard drives.
Am I ok using NTFS-3g and keeping my drives formatted NTFS indefinitely, or should buy a new drive, format it FAT32, and move all the data to it? -
Can we use JDK in ERP Connector for tranferring data between two DBs?
HI ALL,
Iam using ERP connector for transferring the data between Proectserver 2003 and R/3 system.
In Erp connector Previously they are using SDK in .net
My assumption is Can We use the jdk for this.
Thanks in advance.
Regards
BHI
Message was edited by: BHI BHIhello bhi,
you want a connector for R/3 that runs in java?
if it is, you case use SAP JCo. I don't have any
idea however, if this connector could connect
ProjectServer and R/3.
regards
jo -
I have a lot of data that I'd like to move from an iMac to a MacBook. Would the best way be to ethernet them together and drag the directory from one to the other?
Transfering files across a newtork could be the easiest way.
There is also target disk mode which allows you to use one of your macs as a external hard drive of sorts.
Info on this here :- http://support.apple.com/kb/HT1661 -
Tranferring data to MAC Lion OSX
any ideas on how to accomplish this since there is no Palm software for Lion OSX? Can raw data be extracted from my Tungsten E2 and be manipulated into existing MAC programs (i.e. calendars, address book, etc.)?
Post relates to: Tungsten E2You can try the export option in Palm Desktop and see if the formats avail. are valid for MAC apps. I am not that familiar with the MAC but here is an article that may help. It states in the article to look into the sync solutions from Markspace for Lion 10.6.
Click on the following link to the kb.hpwebos.com webpage for the article regarding How do I export data from Palm Desktop for Macintosh?
http://kb.hpwebos.com/wps/portal/kb2/common/article/36278
For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
http://kb.hpwebos.com/wps/portal/kb/na/tungsten/e2/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc. -
High CPU when tranferring data between VLANs on the same subinterface
Hi
i have Cisco 2821 with 2 subinterfaces on the G0/0, with 2 different VLANs on them.
When i copy about 60 Mb/s between them, the CPU usage increase to 80-90 %, and start to drop the packets.
The CEF is on on all those subinterfaces.
Any recommendations ?
many thanks
Here is the info about those subinterfaces:
#sh cef interface g0/0.10
GigabitEthernet0/0.10 is up (if_number 5)
Corresponding hwidb fast_if_number 21
Corresponding hwidb firstsw->if_number 2
ICMP redirects are always sent
Per packet load-sharing is disabled
IP unicast RPF check is disabled
Input features: Stateful Inspection, Virtual Fragment Reassembly, Virtual Fragment Reassembly After
Output features: Stateful Inspection, TCP Adjust MSS
IP policy routing is disabled
BGP based policy accounting on input is disabled
BGP based policy accounting on output is disabled
Hardware idb is GigabitEthernet0/0
Fast switching type 1, interface type 27
IP CEF switching enabled
IP CEF switching turbo vector
IP prefix lookup IPv4 mtrie 8-8-8-8 optimized
Input fast flags 0x400061, Output fast flags 0x10181
ifindex 2(2)
Slot Slot unit 0 VC -1
IP MTU 1500
#sh cef interface g0/0.117
GigabitEthernet0/0.117 is up (if_number 21)
Corresponding hwidb fast_if_number 5
Corresponding hwidb firstsw->if_number 2
ICMP redirects are always sent
Per packet load-sharing is disabled
IP unicast RPF check is disabled
Input features: Stateful Inspection, Virtual Fragment Reassembly, Virtual Fragment Reassembly After
Output features: Stateful Inspection
IP policy routing is disabled
BGP based policy accounting on input is disabled
BGP based policy accounting on output is disabled
Hardware idb is GigabitEthernet0/0
Fast switching type 1, interface type 27
IP CEF switching enabled
IP CEF switching turbo vector
IP prefix lookup IPv4 mtrie 8-8-8-8 optimized
Input fast flags 0x400061, Output fast flags 0x10181
ifindex 2(2)
Slot Slot unit 0 VC -1
IP MTU 1500
sh int g0/0 st
GigabitEthernet0/0
Switching path Pkts In Chars In Pkts Out Chars Out
Processor 13584490 436643191 27043759 2436202283
Route cache 70111252 1482061430 60433310 610254739
Total 83695742 1918704621 87477069 3046457022Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Recommendation? Yes, you may need a faster router. At 60 Mbps, you might be bumping into the capacity limitations of the 2821. -
Want to share application data between Mac's on home network.
Hello,
We currently have one iMac at home and I would like to start using separate logins for different family members, but I want to be able to share applications (Mail, Address Book, ICal, iPhoto, etc.) across accounts. Can it be done? I would hate to have to set up all the email account information again or have duplicate copies of the large iPhoto library. Or two separate versions of address book and iCal.
This issue is also the #1 reason why I hesitate to purchase another iMac or MacBook for our house. I want to be able to be sitting downstairs on the MacBook and access the, for example iCal and not have to run 2 different versions and worry about synching them.
Any input is appreciated.
Thanks,
Brad.Hi Brad, OSX is setup to keep all this account info seperate, but on iPhoto for example, you can...
Move iPhoto libray...
http://support.apple.com/kb/HT1229
Might also see Old Toad's posts here...
http://discussions.apple.com/thread.jspa?threadID=1627454&tstart=150
And Old Toad's Cellar here...
http://web.mac.com/toad.hall/ToadsCellar/ToadsCellar.html -
Synchronization between Mac and iPhone using sync services framework
Hi,
I want to sync custom data between Mac app and iPhone app. In the first stage it would be sufficient to sync all data from Mac to iPhone, but I want to use sync services framework to make it extensible (just updating new data, syncing from iPhone to Mac, ...).
Are there any documents, reports, articles, examples, tutorials, books or anything where is described how to implement this?No
-
How can I exchange my whole data between my mac book pro and my iMac?
How can I exchange my whole data between my mac book pro and my iMac?
i use both, the macbook at work and the imac at home, but ineed to have the same data on both macs, how can i sync them?
-
How can I share data between WinXP Pro and Mac OS 10.8.3 via wifi
How can I share data between WinXP Pro and Mac OS 10.8.3 via home wifi.
MartyP wrote:
Or is there a problem with both OS's writing stuff to the
~/Home/Library folder that may be incompatible?
Yes, big time. Mail, for sure, has a different file/folder structure, and would not be happy.
Plus, a number of apps (Apple and 3rd-party) are "Sandboxed." That's a security feature, to prevent malware or bad coding from affecting things it shouldn't. Some of their files, including the preferences files, aren't even stored in the same places!
Or to other places I'm not aware of?
Probably. If you have two versions of the same app, they may or may not expect the same data setup.
To have one User folder for both OS's would save a lot of drive space
Not if you use some or all of woodmeister50's suggestions.
But I'm also not sure how I'd use Time machine with such a set up.
Just as you do now. By default, Time Machine backs-up everything (except things like system work files, most caches and logs, trash) for all users and all internal drives & partitions. By default, it excludes external drives.
You can change those defaults, of course, via TM Preferences > Options.
See Time Machine - Frequently Asked Question #32 for details and considerations of multiple drives.
Presently I backup with . . . clones to other HD's
Good. Yes, clones are different. You need multiple "tasks" to back up multiple drives/partitions. But once set up, that shouldn't be a big deal. -
Can't find data after transfer between macs using migration assistant
I wanted to transfer data between my Macbook air using Mountain lion and a MacBook pro using Mavericks. I did it using migration assistant through Wi-Fi. The process was completed without problems but I can't find the data on the MacBook pro!
It was my pictures folder, about 50Go and I can't find it anywhere on the new computer. It should be easy since there is almost nothing on there at the moment. It is a new install.
The disk utility tells me that I have now an extra 50Go of space used, so it must have been transferred...
Any idea?
ThanksI found my data in the shared folder. Not all of it was there and in the end a nice lady from Apple told me to start again from the beginning and delete the mess the import program created
I am still a bit confused over the red circles but make sure you are in the right account when trying to see the data as I dont think even as admin I could see the main user account (I had 5 for the family).
There is a button under the get info tab that can change some of the permissions
Frustrating isnt it -
Slow Data Transfer Speeds Between Macs.
Hello Can anyone please help?
When I transfer data between my MacBook and iMac it is taking ages and never used to be this slow a couple of months ago.
A 1 GB file is taking 2 hours. I am using an Airport Extreme 802.11n router on 5GHZ Wide Channel and when I check my connection using Network Utility it says 270 MBit/s.
Any help would be appreciated
Thanks
ShaunI am having a very similar issue. I am copying iTunes music to a USB flash drive formatted to FAT32. It is very slow - not as slow as you have indicated, but still very slow. Someone mentioned it could be Spotlight indexing the USB drive. I am going to turn indexing off and try again - although it is taking a long time just to stop the current copy that I had in progress.
-
My home sharing continually fails between mac and apple tv 2.
my home sharing continually fails between mac and apple tv 2, even during watching a movie. I go to the mac to re-turn on home sharing but it is still on. Any tips? I also have to turn off and back on at the mac every time i switch on my apple tv.
Sharing Stopped working again over night.
I went to Apple Support Artical TS2972
As soon as I did this Home Sharing started working
http://support.apple.com/kb/TS2972
Firewall Section
5. Check Firewall Settings
If you have a firewall enabled in your router or computer, make sure that the firewall is not blocking communication between your computers. Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries.
In addition, Apple TV and Mac computers will use port 123 to set the time automatically. Incorrect date and time on either the computer or Apple TV can cause errors for Home Sharing and connections in general.
If you are unsure whether your router has a firewall or the required ports open, test additional devices or another network to help isolate the issue. If the devices tested work on another home network, it is your router or network configuration.
For Mac OS X, you don't have to edit the port addresses, but make sure the firewall in Apple () menu > System Preferences > Security > Firewall are not set to:
Block all incoming connections
Allow only essential services
If you use another security/firewall software on your computer or router, follow this article or contact the manufacturer or check the documentation on how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
It made sense to me, but its still puzzling me after restarting a router would (in my first attempt) resolve the issue for a day. This this time I applied the port forwarding TCP and UDP ports and saved the settings in the DLink DIR-655 and both my iPad2 and iPhone 3GS were now again finding the share. My ATV2 is also now accepting the Share.
Tommorrow will be the true test.
Maybe you are looking for
-
Exchange calendar over Active Sync not working - Email does work
Hi all, I am having some strange issue with my iPhone calendar sync with Exchange (not over iTunes but over the Air with the new business features). I happen to connect to the exchange server and exchange Contacts and Email without any problems but w
-
How to add a Link to Edit User Account Info?
Hi, I want to add a link that will take me to the edit user page in oiddas, for the current logged in user. I would have thought that this would come standard in portal, as a smark link. But all I have is the Edit Portal Profile link (which allows me
-
Transfer item text invoice in Document FI
Hi developers, I wish transfer the item text of the invoice SD in field of Account Document FI (BSEG-SGTXT ). Have you some ideas for help me!!!!!!!! Thanks in advance Domenico
-
Security steps in system refresh
Hi all, what are the pre steps and post steps from security point of view that needs to be performed on the target system when we do a system refresh . Thanks.
-
I'm running Maemo5,Version : 20.2010.36-2 which is a Global Firmware if I haven't mistaken,could someone please help me out with an update to this post a link,email me,inbox me d link.Anything Help will be appreciated thank you Solved! Go to Solution