Tranport Considerations cross different SLDs

We came cross following situation:
There are different SLDs in different Landscape:
Saying we have Dev SLD and Test SLD, there is no one is master SLD. They are peer-to-peer right now.
We have development done and now we need to transport our deployment to Test:
But right now, the two SLD contents are messy: In Test SLD, it also have TS and BS created (not imported) that already created in Dev SLD.
What are the best approach to clean up the SLD contents ?
Thanks
Liang

Vijay,
Are you sure you had deviced the strategy you had mentioned here? If it was the same did it work ?
Cause if i understand you correctly then i dont agree with you.
>Then the Production SLD would need to have pnly the Prodcution TS and BS.
Do you think CMS will work in that case? Shoudnt the production SLD have QA BS.? It should have.
>For Dev to QA, the target must be mentioned in Dev
Why do we need to mention the target in Dev SLD?
For Dev-QA - the source system should be mentioned in the QA SLD. There is no need to mention the target in the Dev SLD. And as you said the target should be available in the QA SLD.
>From Qa to Prd, the target must be mentioned in QA and the target must be available in PRD.
We would need to do the same way as mentioned above.
>QA will have all QA and PRD TS and BS
QA SLD doesnt need to have PRD TS/BS. QA needs to have QA & DEV TS/BS.
>PRD will have all PRD TS and BS only
PRD SLD needs to have PRD TS/BS as well as QA TS/BS.
Regards,
Sumit

Similar Messages

Database files can be ported over cross different OS ?

Can someone highlight me:
"under oracle version 10 release 2, database files can be ported over cross different OS, e.g. between HP-UX and Sun Solaris", --- is it true ???
thanks in advance.

check out the CONVERT option available with RMAN of Oracle 10g.
for details look at the 10g Recovery Manager Reference.
Only restriction is both the source and the target should have a compatible parameter in the init.ora file set to 10.0 and higher.

Howto export and import SLD data to different SLD's

Hi All,
I have a landcape with 4 SLD's. A central SLD within Solution Manager and 3 SLD's for resp. XI dev,qas,prd.
The central SLD is version 7.0 and the XI versions are 2.2. (model versions are the same, CR are different -> XI SAP_CR 2.18 -> Solman SAP_CR 2.0)
The idea is that all changes in Bussiness (including new products and software components) and Technical Systems take place in the Solution Manager. After a change we make an export and import it into XI dev, qas and so on.
However....
When adding, for example, an exsisting product to a technical system, export it on Solman and import it into XI dev, all entries dissapear(sapms/host/clients).
We filled Solman with a full export of XI development and that worked fine.
Does anybody has an idea about actions to be taken?
Thanks,
Sjoerd Lubbers

Hi All,
I have a landcape with 4 SLD's. A central SLD within Solution Manager and 3 SLD's for resp. XI dev,qas,prd.
The central SLD is version 7.0 and the XI versions are 2.2. (model versions are the same, CR are different -> XI SAP_CR 2.18 -> Solman SAP_CR 2.0)
The idea is that all changes in Bussiness (including new products and software components) and Technical Systems take place in the Solution Manager. After a change we make an export and import it into XI dev, qas and so on.
However....
When adding, for example, an exsisting product to a technical system, export it on Solman and import it into XI dev, all entries dissapear(sapms/host/clients).
We filled Solman with a full export of XI development and that worked fine.
Does anybody has an idea about actions to be taken?
Thanks,
Sjoerd Lubbers

Target Business system in a different SLD

Hey
Is it possible to assign a business system to a target that is in another SLD?
In our landscape we have DEV and QA in one SLD, PRD in another. I dont want the _QA extension to apply for my PRD objects and therefore would like to create a target for the QA business systems etc.
Thanks!
regards Ole

Hi
I have created a BS_PRD in my initial SLD and set the target for my BS_QA to BS_PRD. I have also created the BS_PRD in my production SLD.
When I try to transport between the directory in QA system and the directory in PRD system, I still get an error message saying that "Business system BS_QA does not exist in the SLD".
When you say manual creation of BS & TS in PRD, what I am trying to should work? Or am I missing something here?
Thanks!
regards Ole

Transports group

Hello all
I am trying to configure tranport group in PI 7
but it only let me configure landscapes
I want to assign dev business sytem to qa business system
how can I do that?
thx
Shai

Hi Shai,
SLD Objects
SLD Objects accessed in Integration Repository
1. Products
2. Software Component Version (SWCV)
SLD Objects accessed in Integration Directory
1. Technical System
2. Business System
Go through this IMP blogs :
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
http://help.sap.com/saphelp_nw04/helpdata/en/89/b5553bf3a76258e10000000a114084/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/soa/soa-management/exchange-infrastructure/preparation%20of%20sld%20for%20transports%20using%20cms%20in%20xi.pdf
Experts Discussions:
Re: Tranport Considerations cross different SLDs
Hope this info is very useful to you..
Thanks,
Satya Kumar..

How to make an entry in transport tab of business system in SLD

Hi gurus,
In PI, in SLD we maintain Business systems. In this business sytem if we go to have a detail look there is a Transport tab.
What is this used for and how to make an entry here.
I'm a basis person and i'm configuring XI for the first time. Kindly help.
Regards,
Priya

1. Yes , you have to maintain target business system for the EACH BS in PROD system.
2. Normally we do have 2 different sld one is explictly for production system. another one is for dev and QA system. Once u done creating all the systems needed for the project. we will copy all business from the dev server to production server. So production server will have all BS from Dev and BS of production server.
3. i am not sure about this. i dont have particular docuemnts . normally we assign target business system in transport tab. and in Intergration Directory we will export the business system from DEV and and import the business system in production system.
Regards,
Balaji
Edited by: Balaji Pichaimuthu on May 19, 2010 9:06 AM

Combine Accounts from different Generations into a single Table Prompt

We are on OBIEE 11.1.1.6.2 and using an ASO (11.1.2.1) cube as a datasource.
I wish to make a drop down menu of only ten accounts in OBIEE. These ten accounts do not all belong in the same generation. The desired Accounts are from Gen6, Gen5 and Gen4. How do I make a single drop down list with these ten accounts when the members belong to different generations ? I have tried building this custom list of ten accounts via Selection Steps but it seems that I cannot cross different generations of the Account dimension.
Any help would be appreciated.

Thanks for the reply Christian. I literally tried at least 100 possible iterations of the Evaluate statement and none of them will compile in OBIEE. Before posting, I scoured the Internet for days hoping someone else has had this issue resolved. I had no luck. If you know of anyone that has actually been successful with the EVALUATE statement to make a list of dimension members from different generations, please post the exact code snippet so that I can leverage off of somone else's knowledge.
I have tried dozens of possible iterations of: with no luck at all.
EVALUATE('Intersect(%1.dimension.members,{[Account1], [Account2]})',"Account"."Gen1,Account")

Doubts : SLD in Production System.

I have 2 SLD's in my Landscape.
1. SLD on solution Manager : DEV-SLD and QAS-SLD ( Both SLD on Same solution Manger as Cenetrlise SLD Option).
2. SLD on Production PI System( Local SLD ) : This SLD we are using in term of Production PI System.
Question : -
Q-1. Now for Tranport Objects from Solman SLD( D and Q) to PRD SLD........ We need to Set Transport targets in Solution manager SLD?????
If yes is the my next question would be :------
Q-2 That means will I have to register PI PRD System as integration Server in Solution manager also ??????????
after this Solution Manager has 3 Integration Server ( Dev IS(mailnly) , Qas IS(mainly) , Prd IS) ???????????????????????
Q-3 Similarly Will have to register DEV PI and Q PI syetm in Production Local SLD ??????????????????
similary on PI PRD Local SLD has 3 Integration Server ( Prd IS(mainly) , Dev IS , Qas IS ) ???????????????????????
Regards
P.S

Hi Prabhat,
Q 1 : Now for Tranport Objects from Solman SLD( D and Q) to PRD SLD........ We need to Set Transport targets in Solution manager SLD?????
Ans: Yes
Q 2 : That means will I have to register PI PRD System as integration Server in Solution manager also ?
after this Solution Manager has 3 Integration Server ( Dev IS(mailnly) , Qas IS(mainly) , Prd IS) ?
Ans: Yes
Q 3: Similarly Will have to register DEV PI and Q PI syetm in Production Local SLD ?
similary on PI PRD Local SLD has 3 Integration Server ( Prd IS(mainly) , Dev IS , Qas IS )?
Ans: Yes
Thanks,

Connect to R/3 systems with different XI systems

Hi all,
I have the next scenario:
R/3 system A --> XI system A --> Other systems
R/3 system B --> XI system B --> Other systems
Both systems have different SLD system.
And I need create an IDOC interface between both R/3 systems.
Could somebody help me?
Can I send and IDOC to a XI system with only configure a RFC connection (SM59) or I need configure it in SLD?
Regards, Raú

Hey
are u suppose to do an IDOC(R/3 system A)-Xi-IDOC(R/3 system B) scenario,of u have to collect IDOC's from both the R/3 systems and send it to a single file?
in any case u have to maintain separate Business system and logical system name for both R/3 systems
thanx
ahmad
Message was edited by:
Ahmad

Central SLD/Local SLD

Hello All,
Is there limitation with central SLD over Local SLD?.
To deploy Webdynpro applications (Mobile) please let me know if there are any limitations
Thanks

Hello.
SLD architecture is a long discussion
There are different views on how to set up SLD's.
In my oppinion, the limitations of SLD is that it's a central component to a growing number of netweaver component.
Right now, the portal, webdynpro, xi, nwdi wouldn't work very well without the SLD.
Considering this there is aspects on how to set up the SLD's. Usually critical systems have a local SLD, with supplyer briges to central SLD's.
You would have a separate SLD landscape for Production servers, since they usually run on different SLA (service level agreements).
If you're using NWDI, it's usually a good place to have you're central SLD.
If you're running a smaller landscape, go for the local SLD only and don't complicate your landscape too much.
Check this document (about last slide) with different SLD scenarios. https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/204994f3-0e44-2a10-17b3-808fbd8db4aa
Regards, Mikael Löwgren

Queries about SLD transport

Hi Forum,
want to know something about SLD transport,
1. If i transport a TS from one SLD to another, will it also automatically transport all products and software components refered by this TS,
2. If the products and Software component refered by this TS, are already present in the second SLD, will it update the software components,
3. If i transport a software component, that is already present in the other SLD, will it update it (overwrite it),
pls help

Hi,
1. If i transport a TS from one SLD to another, will it also automatically transport all products and software components refered by this TS,
>
Irrespective of whether you have a Common SLD or Different SLD's , you need not create the SWCV manually in your SLD. When you transport the SWCV and import it into your new IR, the corresponding entries will happen in SLD.
In CMS transport, you could select the individual object or namesapce or all software component to be transported.
refer below links for CMS
CMS for SAP Exchange Infrastructure
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Configuration of CMS in Central NWDI & SLD to transport XI objects
/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
How to Use CMS in XI 3.0.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
CMS based transport in XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
In your source system,. say tool--> Export --> using file system and then select your SWCV. The exported TPZ file wll be placed in the EXPORT directory of your server.
Now, copy this TPZ file into the import directory of your new server and then tolls --> import.
For the export and import directories, XI Homepage --> Administration --> General Information.,
2. If the products and Software component refered by this TS, are already present in the second SLD,
will it update the software components
---> Hi yes it will update the existing Software component refered by TS. No need to create another one.
While transporting the modified object
Refer CMS links mentioned above. Here you could select the individual object or namesapce or all software component to be transported.
3. If i transport a software component, that is already present in the other SLD, will it update it
(overwrite it),
--> It depends upon the object you are transporting. For e.g if you have transported the whole software component then the existing will be overwrite. Or if you add individual object or namspace then only that part will be overwritten.
Here you have option in CMS transport to mentioned, if you wish to delete any object, then jsut delete it from development SDL i.r. IR or ID and transport deleted object to Qu. you will get that option in CMS.
Thanks
SWarup

SLD Transport issue

Hi All,
I have transport issue with SLD objects. I have different SLD's for my Development and Quality.
1) Is CMS a option to transport the SLD objects like Business systems and Technical systems.
2) I have technical System XYZ on Development system with 2 SWCV's installed for it but in the Quality i have for the same system XYZ i have three SWCV's installed, now if i transport the technical system XYZ from Development to Quality i want the additional SWCV installed for XYZ to be removed, but this is not happening, i even tried to transport the concerned SWCV and Product from Developmen to quality still the installed systems doesnt change as Desired.
Please tell me if its possible and how can be achieved.
Thanks and Regards,
Raj.

Hi,
Two types of transport mechanism are used in PI.
File transport method.
CMS transport method.
One upcoming is CTS+.
Perform the following to import/export ID objects.
1. To export or import directory objects, call the configuration maintenance screen of the Integration Builder.
2. Call the context menu for an object in a collaboration profile in the Integration Builder navigation tree and choose Export.or choose Tools ® Export Configuration Objects
3. Select the Transport Using File System mode and follow the wizards instructions. When selecting individual objects, you can use drag and drop to drag the objects from the navigation tree and drop them in the object selection field.
The Integration Builder saves a binary export file with the suffix tpz in the export directory of the directory server
Do not change the file name of the export file. If you do, the Integration Builder will not accept it as the appropriate file when you import.
4. To import the export file(s) to another Integration Directory, first copy or move it to the import directory of the target directory.
5. Call the configuration maintenance screen of the Integration Builder for the target directory. Choose Tools ® Import Configuration Objects...
6. Select the export file saved in the import directory by using the dialog box that appears.
If the import is successful, the export file is moved to the subdirectory Configuring Groups and Transport Targets
Configure the CMS:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Overview of Transition from Dev to QA in XI
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
regards
Aashish Sinha
PS : reward points if helpful

XI Transports general question (SLD / CTS+)

Hi all, I ve the both following question : (it is not clear for me)
1) Does CTS+ transport management use SLD transport and target data linked with business system to adapt XI configuration (ID) regarding Business sender and receiver systems ?????
2) One of my customer want to install only 2 XI system.
- 1 linked with Dev & Quality R/3 environment
- 1 linked with production R/3 system
Is it possible regarding SLD content ?
How must the transports be managed in this case using CTS ?
Thanks a lot

Hi Jeans
for more deatils related Transports have a look on these links
Create a Tranport Target for the SLD entries.
<b>I think these blogs will help you-</b>
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
For more -
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/a21e3e0987760be10000000a114084/frameset.htm
Re: Transports
Re: Multiple SLD in DEV QA and PROD XI and ID transports
Transports in XI using CMS, assembly issue
XI Transports
Thanks !!!!

CTS+ configuration for NWDI - Development configuration error

Hi All,
I really need some help on this. we are configuring CTS+ on Solution Manager system for NWDI, EP landscape (EPD, EPQ,EPP) and SLD system.
we made EPD as development system and trying to use CM Services to configure the NWDI scenario SDA/SDC Deployment.
I have created all NON-ABAP systems and created the CTSDEPLOY Http connections. I am getting the popup to configure the Development Configuration,"What is the User I have to use here and of which system?" and what are the authorizations required to configure this.
As soon as the popup comes, It is asking for the user ID and Password. I am entering Solution Manager (Admin user with all CMS actions also assigned) user then it is giving the following error on the screen. " Could not connect to SLD; contact your System Administrator: User SAPNWDI is not allowed to do this function "
I have give the SLD url correctly, and the admin user for SLD and Password. I have cross checked the user for password, every thing is fine.
I really appreciate your help.
Thanks,
Ramu J.

http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
Hi Ramu,
Pls answer me for below.
specified SLQ as my SLD
1.
You said SLQ is you SLD, but You configuring CTS on solution manager. but solution manager has its own SLD.
a. SMG solution manager SLD
b. SLQ is also SLD
If there is two sld then you should get error
" Could not connect to SLD; contact your System Administrator: User SAPNWDI is not allowed to do this function "
This is becuase you are giving the user which is present in SLQ SLD but CTS is checking the Solution manager SLD.
For CTS you should have centralied SLD.
2.
Can you tell me one more thing, in CTSDEPLOY do I need to give the SMG host and port number or EPD's host and Port number?
You have to specify the host and port in CTSDEPLOY of the system on which CTS contoller should work i.e EPD or SMG.
To resolve your all this problem first of all make the SLD as central . i.e Make solution manager ( CLQ ) as SLD or SLD system in you landscape ( SLQ ) as SLD.
don't keep two different SLD . If you keep Solman as its own SLD then CTS will search component from SMG SLD
Pls follow the guide
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
3.
Could not connect to SLD; contact your System Administrator: User SAPNWDI is not allowed to do this function
Can you tell us in which system this SAPNWDI user is present
Check the SLD of of system in which SAPNWDI user i present
system is whether in SMG SLD or SLQ SLD
If you are not clear with my above suggestion pls let me know.
Thanks
Anil
Edited by: Anil Bhandary on Oct 24, 2009 10:28 AM

Transports in XI and Client Proxies

Hi All,
I had to transport XI Contents from Dev to Qua.
I had 2 different SLD's.
so what do i need to transport in SLD? CR,LD,NR or All
I had created Proxies in $TMP package in sender system.
How do i transport them?
Thanks in Advance,
Sriram

Hi,
I had created Proxies in $TMP package in sender system.
How do i transport them?
U have to create a transport request number and u have to save ur changes into the request number then it can be transported.
Check some links on transporting using File and CMS,
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Transporting IR,ID Objects using File System
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Regards,
Phani
Reward points if Helpful

Tranport Considerations cross different SLDs

Similar Messages

Maybe you are looking for