Tranport Request from Higher  version to Lower Version

Hello,
                  Can any One Know how to Transport Requests from Higher Version to Lower Version for Example
                   From  Ecc6.0 Ehp1 to->>>>> Ecc6.0.    is there is any way or any  SAP Note related  to this?
                  Please, send me if any one done/ aware of it with  the needful steps     ASAP
Thanks & Regards,
pavankumar.

Not sure you are in the right forum. You will have a better chance of an answer in a Basis forum.

Similar Messages

  • Transporting a model in VC from higher version to lower version

    Hi All,
    How can i transport a model built in higher version to lower version.(EHP1 to 700.14 of Portal)
    Also, will all my fuctionality work there if it is transported?
    I have imported a model built on higher version of Sandbox to lower version of Dev server by changing its version manually by opening the model in notepad.But after deployment i am not able to see any of the functionality working.Such as-I am not able to submit the data enetred in the data fields.
    Please help.
    Thanks & Regards
    Richa

    Adding some points to the above question.
    Also,I cannot clear entries from the data fileds, as there is not System Action defined for clear in version 700.14.
    Please suggest,what changes shall i make.
    Thanks & Regards,
    Richa

  • Importing dump taken from higher version to lower version

    Hi all,
    I have already taken dump from oracle 9.0.2 database without using exp utility of lower verion and alo without running catexp.sql script prior to export.
    Now i need to import this dump into 9.0.1 database.It gives error due to backward-incompability.
    Is there any way to import without re-exporting whole database again using exp utility of lower version against higher version.

    It is an unsupported scenario. I had to face it once with the same 920->901 versions. What I did was also absolutely unsupported at my own risk and it was a last chance action. I'll tell you what I did and how it worked for me, which doesn't mean it will work for any situation. If you open your file with a binary file editor you will see at the first file blocks a header that displays the export version "EXPORT:V09.02.00" This header is read by the import to check which version was used to generate the file and prevent an unsupported downgrade, I changed it to EXPORT:V09.00.01 and retried the import. A lot of error messages appeared, but it successfully loaded my information. I took the risk because I made sure this specific database contained just basic tables, indexes and version compatible objects and definitions, it was a testing environment, I didn't have the right Oracle version and there was no time to get it, and finally I had a bullet proof backup.

  • Export import issue from higher version to lower version

    Hi,
    I have an export dump file which was taken from 11g database(11.2.0.2.0) and trying to import into lower version of the database 9i(9.2.0.6.0), unable to complete the process.
    Two ways i have found and tested in my test db
    1)TNS entry of 9i database has been put into 11g database
    a)Export dump was successfuly taken from 11g db
    b)Getting below error,while import into 9i database
    IMP-00058: ORACLE error 6550 encountered
    ORA-06550: line 1, column 33:
    PLS-00302: component 'SET_NO_OUTLINES' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignoredIMP-00000: Import terminated unsuccessfully
    2)TNS entry of 11g database put into 9i database version.
    a)During export (trying to take exp dump from 11g db in 9i exp utility),getting below error
    EXP-00008: ORACLE error 1455 encountered
    ORA-01455: converting column overflows integer datatype
    EXP-00000: Export terminated unsuccessfully
    Kindly advice me to overcome from this issue.
    Regards,
    Faiz

    mafaiz wrote:
    Hi,
    I have an export dump file which was taken from 11g database(11.2.0.2.0) and trying to import into lower version of the database 9i(9.2.0.6.0), unable to complete the process.
    Two ways i have found and tested in my test db
    1)TNS entry of 9i database has been put into 11g database
    a)Export dump was successfuly taken from 11g db
    b)Getting below error,while import into 9i database
    IMP-00058: ORACLE error 6550 encountered
    ORA-06550: line 1, column 33:
    PLS-00302: component 'SET_NO_OUTLINES' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignoredIMP-00000: Import terminated unsuccessfully
    2)TNS entry of 11g database put into 9i database version.
    a)During export (trying to take exp dump from 11g db in 9i exp utility),getting below error
    EXP-00008: ORACLE error 1455 encountered
    ORA-01455: converting column overflows integer datatype
    EXP-00000: Export terminated unsuccessfully
    Kindly advice me to overcome from this issue.This has nothing to do with APEX. Post on the {forum:id=61} forum.

  • Exp imp issue from higher version to lower version

    Hi,
    I have an export dump file which was taken from 11g database(11.2.0.2.0) and trying to import into lower version of the database 9i(9.2.0.6.0), unable to complete the process.
    Two ways i have found and tested in my test db
    1)TNS entry of 9i database has been put into 11g database
    a)Export dump was successfuly taken from 11g db
    b)Getting below error,while import into 9i database
    IMP-00058: ORACLE error 6550 encountered
    ORA-06550: line 1, column 33:
    PLS-00302: component 'SET_NO_OUTLINES' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignoredIMP-00000: Import terminated unsuccessfully
    2)TNS entry of 11g database put into 9i database version.
    a)During export (trying to take exp dump from 11g db in 9i exp utility),getting below error
    EXP-00008: ORACLE error 1455 encountered
    ORA-01455: converting column overflows integer datatype
    EXP-00000: Export terminated unsuccessfully
    Kindly advice me to overcome from this issue.
    Regards,
    Faiz

    lkm_thedba wrote:
    you can use VERSION parameter in datapump and make this workable.
    Cheers,
    lkmYou cannot, since 9.x does not use datapump. The VERSION parameter can only be used if the target is 10.x or above
    http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_export.htm#autoId57
    http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_overview.htm#CEGFCFFI
    HTH
    Srini

  • Can I downgrade ios from 5.1 to lower version?

    I have iPad 1st generation- did 5.1 update since update ipad is constantly crashing - can I downgrade to lower version software?

    No. Apple has never approved any procedure to downgrade iOS.
    Allan

  • Export from higher APEX version to lower version

    Hello,
    Is there anyway to export an application from APEX version 3.0? Oracle 11G to version 2.2? Oracle 10G? Any help greatly appreciated.
    Sharon

    Bharat,
    When 3.1 is released, say early 2008, you can make your decision based on the information in the Release Notes and related collateral which should provide a useful synopsis of new features.
    The database version you select is an independent decision.
    Scott

  • How to run jar file created with higher version on lower version ?

    Hi,
    I downloaded a jar file and trying to run it on Linux machine with Java version 1.4...
    I got error that jar file complied with 1.5 version.
    Is there any way to run it on 1.4 version. I don't want to upgrade Java version of my linux :)
    Regards,
    Ajay

    EJP wrote:
    On the contrary, the 'reality' is that it is better, and probably easier, once you analyse and present the comparative costs and risks correctly, to get the mandate lifted than to back-port code to platform levels for which it was not designed.The main blockade (judging by my observations) for actually doing it is that this is not a simple code change, which is what programmers really, really, really want to keep it within their comfort zone. All of a sudden you're tasked with software upgrades and the demands that it brings, such as testing to make sure everything still works properly and getting grumpy system's administrators to actually go do it.
    I wouldn't be surprised that there are people out there that would rather back port a library than to take the initiative to get Java upgraded :/

  • Can higher version corrupt lower version databse ?

    Dear Experts,
    Oracle 9.2.0.6, HP-UX
    Oracle 10.2.4 HP-UX
    Can a database be corrupt in following situation:
    1. export ORACLE_HOME=9iHome
    2. export PATH=9iPath
    3. database is working fine as it is created in 9i
    4. Shut immediate;
    5. copy parameter file from 9i to 10g home
    6. export ORACLE_HOME=10gHome
    7. export PATH (Oracle 10g path) ---> started with 10g
    8. sqlplus "/ as sysdba"
    9. startup
    10. shut immediate
    11. export ORACLE_HOME=9iHome
    12 export ORACLE_PATH=9iPath
    13 startup
    What will be result ? will database refuse to open ?
    Thanks & Regards
    Sunil Kumar
    Edited by: sunil kumar on Sep 4, 2011 8:27 AM

    It should refuse to startup as the first startup in this scenario would need to be a startup upgrade or a startup migrate, whatever applied to 10g.
    Evidently, this is discussed in the migration manual, and evidently this is why your question is redundant in this forum.
    Sybrand Bakker
    Senior Oracle DBA

  • Can I move back from Nokia Belle to lower version ...

    I installed Belle on my E6 and having a lot of trouble with it. Main issue is that wherever there is an option key at the center of row at bottom, Touch functionality is disabled at center. I am not able to activate the center key.
    This means, I cannot even set an alarm, cannot add locations in World Clock menu, cannot search programs from main menu, etc...
    Need immediate solution please...
    Karthik

    Jimmy, it pains me to jump ship from Nokia. I don't take it lightly. I have been using Nokia phones for years. In fact right now I am using my 5 year old beat up old falling apart E71 while waiting for the S3 to arrive. The E71 is a way better phone that the E6. If the E6 had been built on S60 then we wouldn’t be having this discussion. I don’t care about album art flow and pretty icons and “Retina” screens, etc. I want a phone that is solid and works. Other than the camera (and it didn’t even have AF), the E6 was a huge disappointment across the board and Belle made it worse.
    Android is not what I would call a great OS and I am not looking forward to the switch but the choices are limited: Android, WP8 and iOS. And I am not going to use an Apple product. I demo’ed a 920 and it just didn’t feel like a Nokia. It may have Nokia hardware but what made Nokia great was Symbian and I am not talking about Belle. The Lumia feels like a Microsoft product. It doesn't really matter if it says Nokia or HTC or Samsung on the package, it's still driven by WP8. Symbian is what made Nokia unique and fun. Stuff that I loved about the E71 is no longer found on any Nokia products.
    I mean no disrespect, but the Nokia products and features that I loved are now gone, nowhere to be found.

  • Conversion from higher value to lower

    Hi,
    I have a variable of dec type length 17 which i need to copy in variable of type dec with length 16. Please let me know the shotest solution for the same.
    <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Feb 12, 2008 10:48 AM

    I don't think you can use offsets with packed fields.
    I would just check to make sure the amount in the source field is not too large for the destination and then if it's not, just do a MOVE.
    Rob

  • Peoplesoft Project migration from version(PT8.48) to lower version(PT8.45)

    Hi all
    I would like to know the migration of a project from higher version to lower version
    for example PeopleTools 8.49 or 8.48 to PeopleTools 8.43 or 8.44 or 8.45
    and the application HR 9.0 or8.9 to HR8.8
    Any idea of this !
    Look forward to here you.
    Thank You.

    jim.marion wrote:
    I believe the ini file Nicolas is referring to exists when you export a project to file (I didn't see mention of exporting the project to a file in this thread).
    If you export a project to a file, then you should be able to import it into another tools release. If you do this, just be sure the project does not contain any PeopleTools definitions.Yes, this is what I was refering to, copy project to a file, modify the .ini (at least that was required on old PT version) as I explained before importing into target. Note if I already tested many time to move project from lower to higher PT version with this methid I never tested it from higher to lower version.
    Furthermore, need to be tested, validated, and I'm not really sure it is a supported way (modify PT release in .ini file) to copy project accross version.
    Nicolas.

  • Can we Transport CRM,ECC,EP request from SOLMAN 4.0

    Hi ,
    We are under NW2004s implemnetation CRM5.0,XI7,BI7,and EP7.0.
    Client wanted to Implement transport configuration from solman 4.0 to all these components.I have experiance on Individual component STMS .
    Not sure how to transport from solman.
    As i know that solman is only monitoring system.Can we transport CRM,EP,BI,XI tranport request from SOLMAN .Istaead of loggin in other systems?
    Your reply would be greatly appriciated.
    Thanks
    Kristene

    Just to elaborate a little more on the point above that "All the existing transport requests in queue will be transported to SOLMAN STMS"...
    This is quite correct, when SolMan takes control of your landscape all the old transports, however far they've gone on their way to production, are visible from SolMan (STMS)...
    However, if you've configured TMS as recommended for change request management (and you should to avoid security loopholes) and without reverting to playing around on the operating system level, you'll find that you are no longer able to do anything at all with them (via STMS for example). Stuff unreleased in development, can no longer be released, transports not yet imported in Quality or production cannot be imported... it's like a total freeze on all the 'old' stuff.
    Fairly simple to work around though - before the go live with SolMan, be sure to clear out and get live as much as you can to reduce the number of 'old' transports still in process somewhere.
    When you're live with SolMan, you'll then need to create new Change documents for the 'in process' changes. Follow the SolMan process up to the point of creating transport requests, and then, in the development system, use transaction SE10 to transfer the contents of the 'old' transports into the 'new' ones created via SolMan. You can then use the SolMan process to migrate the transports.
    Generally there's no problem with this, but occasionally, especially for workbench objects, you may find that you can't release the 'new' transports via SolMan. 99.9% of the time this is because the objects are locked in the 'old' transports, but you can usually use SE10 to delete/remove the objects/release or generally mess around with the old transport until the new transport can be released. Beware also that there is a risk of picking up the latest version of an object, rather than the version in the 'old' transport when using this process...
    Hope this helps -ILL

  • Transporting Transport Request from One System to other

    Hi All,
    I want to create tranport request from ECC 5.0 System to ECC 6.0 system.
    Please let me know steps for creating transport request and transporting transport request from one system to other system.
    Thanks in advance.
    Best Regds,
    zubera

    Hi,
    You cannot transport request from ECC5.0 to ECC6.0.
    Instead follow this:
    <b>In ECC5.0</b>
    Include all the objects into a transport request & provide the transport request no. to BASIS.
    BASIS team will create 2 files for you based on the transport request no.
    <b>in ECC6.0</b>
    Provide the 2 files to BASIS Team & ask them to import them.
    The objects would be available in ECC6.0
    Best regards,
    Prashant

  • Regarding Transport request from system to file or product CD

    Hello Gurus,
    Can anyone tell me how to transport transport request from  system to file or product CD.
    It is urgent.
    Thanks in advance.
    Best Regards,
    zubera

    Hi Albert,
    Thanks for your reply.
    I want to know the steps how to tranport TP ( tranport request ) from system to file.
    Please can you detail procedure or any link to transport TP from SAP to file and file to SAP system.
    Thanks in advance.
    Best Regards,
    zubera

Maybe you are looking for