Tranport request missing

Hi all,
our dev server crash. after database restore the problem is solved but it is status on when backup is taken
during backup and crash we upgrade some program with transport request. those request are missing after backup restore
those request are already released and imported in qas and prd. if we create new request in dev server it is created with old request no.
how to solve this problem.

So the transport no. that is being generated in your dev system is older or before the system crashed and you want to change the transport no. to some new transport no. so it does not conflict with the transports that are already imported into QAS and PRD , correct ?
If I have understood your issue correctly then what you need to do is update table E070L with the new transport number on your dev system.
Hope this helps.
Thanks,
Naveed

Similar Messages

  • How to create a New Tranport Request for changed  Extract structure

    How to create a New Tranport Request for changed  Extract structure ?
    Hi Experts,
    I have a FI AP Generic Datasource containing extract structure with appended fields.
    It has already been activated and transported to Testing System.
    Now, I am to create a new transport request for this DataSource and Extract structure.
    I do not want to delete and recreate the Generic Datasource.
    I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
    Please let me know the steps
    URGENT

    Hi Dev,
    Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
    Hope it helps...

  • Saving Infoset to tranport Request

    Hi all,
    I have added a table in the infoset and generated the same but there is no transport request pop up appeared before the generation or on saving it.
    My problem is that i want to save the changes made in the infoset into transport request and i am not able to do the same.
    Gurus guide me to the procedure of saving the infoset to the transport request.
    Thanks in advance.
    Anuj.
    Edited by: Anuj Anuj112 on Jun 24, 2009 6:22 PM

    Hi ,
    Please find below the steps for transporting your infoset.
    1) Select the infoset to be transported in SQ02 and click Environment->Transports.
    2) Selct the Export option
    3) Remove the test run check box and select overwriting allowed
    4)Select the transport infoset and queries option .
       Import option would be replace
       Here yuo have to specify your infoset name in both lower and upper limit .
       the same applies for queries .
    Execute it , this would create the transport request .copy this tranport request release it and go to transport management in SQ02 in the client where the changes need to be imported .
    Here select the import option and overwriting allowed and select Transport infoset and queries as mentioned above
    in Dataset with import mention the transport request that was created earlier.
    Regards,
    Raghavendra

  • Client ,tranport ,request id,release

    client ,tranport ,request id,release in detail?

    Hi chandra,
                   Client ,tranport ,request id,release in detail?
    Assuming you want to know about Transport connection in detail..
    Transport connection -
    > Grouping(Neccessary objects)(It works fine for me!!)---->Object Types>Eg(Cube)--
    >Assign to a Transport Request(Truck icon).
    *The following Transport sequence * :(Only Neccessary objects)
    a)Info object catalog
    b)Application component
    c)Infocubes & ODS
    d)Transfer rules/Update rules
    e)Infopackages
    f).Multiproviders
    g).Queries/Workbooks
    h)Process chains
    Procedure:
    1. SE09 - To release the Tasks(first) followed by the Request.
    2.Ask your Basis to Import them request to the QA or Prod server.Or if you got authorization for STMS,you can import them request.(make sure u adjust import queue before attempting to import).
    3.Check in the respective Target(QA/PROD) on whether the BW Objects are transported fine.
    I guess this is what u asked for!!!!!!!!!
    cheers
    Arun

  • Download abap object under a tranport request.

    hi experts
                  i have a requirement, a tranport request contain any ABAP Object i don't know how many object actually it contains may be one or more just suppose it will have a report program under a  transport request , in the select-option i will enter transport request number and the path of the directery( whr i have to store the report program). now this report wiil download the report program on this path which i have given in section screen.
    could you please help me where the transport requests are stored in SAP is thr any table pls give me table name or is thr any function module to do this job.
    thanks & regards
    pardeep kumar

    Take a look at the following tables :
    E071
    E071C
    E071E
    E071K
    E071KF
    E071KFINI
    E071S
    They contain the data you are looking for.
    Hope that helps,
    Michael

  • Customer Downpayment Request Missing

    Hello,
    I generated a down payment request through VF01 and in the order document flow, that down payment request showed up. But in customer account FBL5N, even I chose noted items, that request was missing.  So now I couldn't clear down payment. What is the possible issue for this situation and how should I fix it? Please help! Thanks!

    Dear,
    Try XD07. Make sure new account group has similar number range.
    Regards,
    Chintan Joshi.

  • Re: Transport Request Missing Very Urgent

    Hi Peers,
    One of my transport request is missing. I had configured in Dev client and the same configuration has been transported to Sandbox, because of Abap programs.
    All the configuration which is there in Dev has been copied to Sandbox & I am able to see all my config.
    Now in Testing also all my requests has been copied from Dev. But One particular request is missing and I dont remember the request name & number.
    I have checked in SE10 also but No Luck not found my request.
    Kindly requesting all of you to immediately give your valuable inputs.
    Regards
    Pavani

    Hi Ruchit,
    Thanks for the immediate response.
    I had gone to SE03 but not able to find out PGMID & Object type & name????
    I am a functional consultant so does not know about these terminology, can you tell me in detail vt needs to be done? My only worry is I had created some 1200 positions in that particular request. If I did not find out again I have to redo the same.
    Can you please kindly help me out what needs to be done?????????
    Regards
    Pavani

  • Spool request missing for Payment run

    Hi SAP gurus,
    I have executed one payment run, 87 payment orders have been generated.  When i saw the spool request, it shows only 34 pages, rest other pages are missing.  Even, system is showing status of spool as "waiting".  I thought, it might be completed in few hours, already 1 day has been passed but no change.  I generated spool couple of time but it always stuck at 34 page.
    Can you please let me know, how can i print rest 43 remittance advice??? I would also like to know the cause of this error.
    Many thanks for your quick response.
    Regards,
    SATVIR SINGH

    1. Check your variant in F110 (Have you restricted the vendor numbers in your variant on parameters) - Last tab on F110
    2. If not, then in your spool, from menu bar, select:
    Go to ==> Display Requests ==> Settings
    Check the from page to to page. (Make to page as 999).
    Ignore any warning messages.

  • Best Practice for Tranport request Naming

    Hi,
    We are using SolMan 4.0 during implementation of ECC 6.0.
    We have placed the blueprint and we are in configuration phase.
    We have a IMG project created in the DEV system and was assinged in Solution Manager project under  System Landscape->IMG Projects.
    Now that consultants are going to dev system and customizing they are creating their transport requests.
    Is there any best practice for the naming convention or the transport requests..
    By creating one IMG project for entire implementation is that going to create any problem..!!
    Please sgugest.
    Thanks & Regards
    Mrutyunjay

    As per MSFT best practices(Mentioned by Scott) keep it short as much as possible. You can use SP for SharePoint-SUBSite
    also check this blog for best practices.
    http://www.networkworld.com/community/blog/simple-naming-conventions-improve-end-user-experience-sharepoint-sites
    also one more thing you should consider, never use the reserved words into the SharePoint URLs. you will able to create the site/lis/library/folder but when you browse get the 404 errors.
    check this blog:
    http://www.sharepointblog.cz/2012/04/reserved-words-in-sharepoint-url.html
    http://techtrainingnotes.blogspot.com/2012/03/names-you-cant-use-for-sharepoint.html
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Http request missing form data 4.5.1

              We occassionally have problem with an Http request not having the form data that was entered. If you hit the back button and resubmit the form everything works fine.
              We have IPlanet webservers and WLS 4.5.1.
              

              We occassionally have problem with an Http request not having the form data that was entered. If you hit the back button and resubmit the form everything works fine.
              We have IPlanet webservers and WLS 4.5.1.
              

  • Problems with tranportation requests in solution buider

    Hi,
    I'm implementing crm2007, and it was everthing going fine, untill now. In solution builder when I went to activate a new building block I had an error message "Transport numbers not fullfill the requirement.".
    I have no ideia of what this could be!!!! I try to create new transport requests, but I had the same error!
    Can anyone give me some guideline to find the problem?
    Thanks

    HI Ragu,
    I created user by settting "En" as default language.But still it is giving same error.
    regards
    srujan
    Message was edited by: srujansingh ramsingh

  • Nokia 301 Feature Request: Missed calls/messages n...

    Hi,
    I just bought a Nokia 301 dual sim phone. I'm satisfied with it except one thing - IT DOESN"T HAVE MISSED CALLS/MESSAGES NOTIFICATION. How come such important and basic function not implemented? No one will check his phone regularly and there is no way to know wether I have missed calls or messages. It should keep making a beep until I read it. I believe this function could be implemented easily in software, even by polling the status at a constant interval or setting up a counter which issues interrupts. Any Nokia staff can answer this questtion?
    Thanks.
    Leonard

    This is a feature which the majority of phone users do not want, and that's why Nokia phones have not done it since the early 2000s when Nokia phones used to beep the morse code for SMS.
    There are two primary reasons why a person might not read a message at the time it comes in:
    He didn't hear it, maybe he was in a noisy place and didn't hear or maybe the phone is in a different room.
    He heard it but was prevented from reacting by other circumstances.
    If you are away from your phone, there are visual cues when you get back to it that a message has come in. If you are walking down a busy street with your phone in your pocket, there is also in the vast majority of phones a vibrate option to give an alternative kind of notification. If you are driving a car responsibly on a journey of some length, it would becoming annoying after a while if your phone was beeping in your briefcase in the back of the car, or if you leave your phone on your desk at the office whilst you are elsewhere, the repeated beeping could be just as annoying to other people.
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

  • MMBE Execute in Background - Spool Request Missing Header Information

    Greetings,
    While reviewing differences between MMBE and MMBE_OLD in ECC 6.0 upgrade test environment it was discovered that when MMBE (RMMMBESTN) is executed in background the spool request does not display the material number, description, material type , UoM and Base UoM.  I created a message to SAP.
    Has anyone else had this issue?

    That you can execute transactions in background is just a standard functionality, which certainly makes sense for reports that have something to do, that run long, need a lot performance etc.
    But MMBE..........I really never had the  idea to run MMBE in background. to get the result online I just have to click the execute button, to run in background I habe to click the menu, click the run in background, click the run immediatly, click okay .....
    and then I would need to open the job to find the spool  etc etc.
    all for just the stock overview of one single material.
    I really would never had spend a thought that somebody would do this effort.
    Why do YOU need to do this?
    I am really curious what SAP answers you

  • Saving Infoset DELETION to tranport Request

    Anyone know how this is done in SQ02? If you click delete it's gone immediately. I'm guessing I need to go into environment->transports first and get in into a transport request?
    I'm not sure what options to choose though, as there's various radio buttons and executing doesn't prompt for a transport request.
    Thanks

    Transport can be done as follows
    By using the standard program u2018RSAQR3TRu2019
    By using the transport option available on the application bar in Transactions SQ02 or SQ03.
    Hope it helps you.

  • FM for checking Tranport Request.

    Hi gurus,
    Transport Request numbers are stored in Table E070,
    it also stores if Request is Customizing request/Correction Request.
    I want to know if there is any existing FM to get this
    information regarding a TR.
    As it is, i think accessing a Basis table directly from
    ABAP would be the last option.
    Thanks in Advance,
    Rohit.

    Dear,
            Your FM is CTS_API_READ_CHANGE_REQUEST.
    Points?
    Regards,
    VM

Maybe you are looking for