Tranposrt - Purchase Requisition Release Strategy with Classification

Gurus!
Tell me if I want to Transport the Purchase Requisition release strategy with classification. The Data in each charisteristics in each PR Strategy that I have set in Dev is not getting transported to Quality.
Do I have to enter the data in characteristics again in Quality and the same procedure I have to apply for Production.
If yes, in this scenario, Can I make Production modifiable.
Regards
Sajid

Hello,
Create a special ID in PRD with access to change characteristics. This ID should be released for specific purposes and with approval (project manager/SAP support manager). You can also turn on auditing so that all activites performed are logged which can be used to satify auditors.
Cheers !

Similar Messages

Purchase Requisition Release Strategy with classification

Hi there,
Please help,
I have the release strategy and workflow working. (Overall Release)
Problem is that Org Structure is not updated so workflow has been configure going to (US) user. As i am using workflow option 1 which is resolved via Group, Code & Plant, I have to have a code for every region and manager to resolve the workflow. I am not using plant as business requirement is overall release.
Scenario is that there are 8 regions with 1 senior region manager and 1 executive.
The region managers can each release up to 20k. Senior region manager must release from 20k - 50k. Executive must release from 50k -250k.
Release Codes:
Regions = L1 - L8
Senior Region Manager = SR
Executive = X1
Characteristics are:
DocType = NB
AccAsingment = K (Cost Centre requisitions)
Purchasing Group = (Each region has own group)
TotValue = 0k -20k, 20k - 50k, 50k - 250k.
Now the release strategies.
Even though it is the same senior manager and executive why do i have to create a new strategy for every region's escalation above 20k taking into account that the business requirement is that the correct region manager has to release before the senior manager can release? It just seems so pedantic when i would rather just add the correct Purchasing Group everytime.
This is only one leg of the Org Structure there are over 40 depts, and managers that will create and release. Do i really need a strategy for every single scenario?
Thanks for taking the time to read.

Hello,
Create a special ID in PRD with access to change characteristics. This ID should be released for specific purposes and with approval (project manager/SAP support manager). You can also turn on auditing so that all activites performed are logged which can be used to satify auditors.
Cheers !

Creating Roles for Purchase Req. release strategy with classification

Hi friends,
Since I have created Purchase req rel strategy where I have four release strategy
1. For Plant 1 When value <= 5000 (Officer) will release , release code 01 release release strategy r1 and rel code L1
2 For Plant 1 When value >= 5000 (Manager) will release , release code 01 release release strategy r2and rel code L2
Now the manager will have 2 release code,if officer is absent he could release the requisition.
Same has to be done for plant 2
The release Group and code needs to be assigned to the Roles , could anybody tell me where i could know about roles and will be able to create roles and assign authorisation objects to the Roles , and release group and code to the enduser.
though its a basis job , since I have no idea , I mean I have never worked with Roles ,as now I have created the Release strategy with classification I need to assign authorisation objects to the Roles as I have four release strategy
1. For Plant 1 lower value of requisition 1 codeL1(Officer)
2 For higher value of requisition 2 code say Li and L2(Manager)
Manager should have 2 codes if officer is absent he could release
Same has to be done for Plant 2
Thanks N Regards
Siddhartha

Hii,
Steps:
1) Create a Role
2) Add the authorization Object M_EINK_FRG by taking the manual option
3) Assign Release Code and Release Grp
4) Assign the Role to the User ID which has the authorization of the Release Code and Grp.
Regards,
Kumar

Purchase Requisition Realease Strategy without classification

Hi,
Request for detail process and configurations for Purchase Requisition Release Strategy without classification.
We have 5 authorities like A1 (Lowest) and A5 (Highest authority) in the organisation to release the PR.
The PR should be released according to value slabs.
Thanks a Lot.
Sachin

Hi Sachin,
IMG> Materials Management>Purchasing> Purchase Requistion> Set up procedure without classification
This process is similar to process of with classification
Go through the link below:
for this no need of creating characteristics and classes
http://www.sap123.com/showthread.php?t=59
http://help.sap.com/erp2005_ehp_03/helpdata/EN/75/ee150b55c811d189900000e8322d00/frameset.htm
If useful, reward me
Thanks & Regards,
Swathi

Purchase requisition release strategy tab missing

Hi all
I configured purchase requisition release strategy and ME51N is working issuing no error but it is not displaying Release Strategy Tab , please help me where i am wrong.

hi,
check few reasons:
1. There might be more than 1 release strategy using the same class, due to which it is not possible for sap system to determine the unique rel. strategy..this normally happens when you copy the exsisting class and assign it to own new one...
2. check the release strategy OMGSCK, is there any problem with your release strategy...
3. Check whether you have maintained all the classified field in the document or not..
4. check whether the release is assigned to any workflow...if so, then check the inbox pls...
regards
Priyanka.P

Badi for Purchase Requisition Release Strategy

Can any help me to know about the BADI for Purchase Requisition Release Strategy .Is their any BADI to control the PO Price for a PR release strategy
Thanks for your help

This badi is for schedule agreement ?
BAdI: Release Creation for Scheduling Agreements with Release Documentation
Use
You can use this Business Add-In (BAdI) to influence release creation.
This BAdI is used in the application component Scheduling Agreements (MM-PUR-OA-SCH).
This BAdI includes the following methods:
Change Data Before Release Creation (BEFORE_CREATION)
Change Data After Release Creation (AFTER_CREATION)
This BAdI is called during manual and automatic release creation.

Overall Purchase requisition Release strategy : Changed after Rejected

Hi All,
I have activated overall purchase requisition Release strategy (20000077) . And its working fine when PR is released at each level and saved.
Problem I have is when PR is rejected .
When PR is rejected , workitem is created for initiator with ME52 transaction. When initiator changes the contents of PR and saves , the release strategy should resume back from where it stopped. Thats means when Approver A rejects the PR, after initiator make changes , the workflow should trigger back with a workitem for release to approver A.
But its not happening as expected. When Approver A rejected the PR and initiator changes the PR , Nothing is triggered, as there is no event raised at this point.
ME52 changes for PR is not trigerring any event which can trigger the WF.
Is there any way we can trigger Workflow in this scenerio.
Please suggest.

Hi Subhashini,
This all depend on release strategy. release should reset completely on tha change.
For the increase of quantities or values you can maintain tolerance limits in the Customizing. When you increase the amount or value via the tolerance limit the system will reset the release.
When you reduce quantities or values the system only resets the release if another release strategy is determined for the lower quantity or the lower value.
If no other release strategy is determined by the reduction of the
amount or value, the system will keep already existing releases.
changeability in Release indicator also play a major role. You should set it to either 3 or 4. Now if you change any field, which is also used in any charecteristics in release, it will lead to reset of release startegy.
Sanjeev

Purchase Requisition Release Strategy wont trigger

All:
I have set up what i thought was a simple purchase requisition release strategy. Parameters are as follows:
1.) Doc Type = NB set up as CEBAN-BSART
2.) Acct Assn Category = k set up as CEBAN-KNTTP
3.) Purch Org = 300 set up as CEBAN-EKORG
4.) Overall Value = 0-1000, 1000-10000, 10000-50000, >50000 set up as CEBAN-GFWRT
Release group is set for overall release, i've checked the release strategy with OMGQCK and everything was good to go, checked CL30N and everything was triggering, checked table T16FS and there weren't any fishy entries. Oh also, i've tried deleting and recreating the entire release strategy at least 3 times.
Whenever i create a purchase requisition, i get no release tab. Not sure what else i'm missing here.
Any help is appreciated!

I created 4 characteristic with the above mentioned criteria (doc type, purch org, net value, & account assignment category). I assigned all 4 of these characteristics to a class.
Matrix is as follows:
0-1000, doc type NB, purch org 3000, acct assignment 'k' needs approval from release code 01
1000-10000 doc type NB, purch org 3000, acct assignment 'k' needs approval from release code 01 & 02
10000-50000 doc type NB, purch org 3000, acct assignment 'k' needs approval from release code 01, 02, & 03
>50000 doc type NB, purch org 3000, acct assignment 'k' needs approval from release code 01, 02, 03, & 04

Release Strategy With Classification

Hey All,
I would like to get some information about release strategy with classification for purchase requisation and purchase order.
Please send me some information regarding this.
Thanks
Kawal

hi,
To see the all the linkages firstly see the classifcation and class defined in the sap system at:
SAP easy access --> Cross application components --> classification system --> master data --> characteristics and classes(CT04 and CL02)...
TO see the customisation, check:
Spro --> MM --> Purchasing --> PO/PR etc --> Release procedure --> Rel procedure with classification --> Here check for all the different transactions...like Relase codes, release stategy, access sequence, schema etc...
Also one important point abt it is:
PR is possible to release at header as well as at item level...
But PO and other external docs are only possible to release at header level only...
In the customisation check all the linkages you will get best out of it....
Regards
Priyanka.P

PR release strategy with classification

As part of a rollout, we are migrating an instance of SAP to the template SAP. Both the SAP instances are following u2018PR release strategy with classificationu2019.
The limitation is that I can configure only two release group in PR release strategy with classification. One for overall release and one at item level release. Also, I cannot assign two different release class for the same release group. If I add additional characteristics in the existing class and keep other irrelevant characteristics as blank the release strategy doesnu2019t works. the release strategy does not triggers.
Any pointers to solve this will be highly appreciated.

Hi Ashish,
If your requirement is to have release strategy with more or different characteristics than in the existing system,you may create a new release group and assign the same to release class.There no restriction for having multiple release groups for same release class.Then create new release strategies for the newly created release group and so on.
Regards,
Edited by: Dayanandan Kamath on Oct 20, 2010 7:52 AM

Release Purchase Requisition - "Release strategy"

Hi there,
I am trying to release a purchase requisition. I looked in the table "EBAN" and i can see the entry or in other words, the requisition i created. In the Release indicator, Release status and Release strategy fields, these are empty. How do i add information to these fields which appear to have missing data?
Speedy repsponse would be very much appreciated.
Thanks
Motolani Fatuga

Hi Motolani
spro>Materials Management>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>Set Up Procedure with Classification-->Release strategy
Select release strategy> Go to details>classification
here check what are the charactaristic and what are the values maintained for it
Check this for all release strategy
Mostly PR release strategy is based on Document type and PR Value
Check whether UR PR fits in release strategy criteria
Suppose Total value of requisition is maintained as 1000-2000
If UR PR value is less than 1000 Then PR will not subject to release
Vishal...

Purchase order release strategy with multiple characteristics

Hi All,
We have Purchase order release strategy based on the following characteristics:
Total Net Order Value
Purchasing Organization
Release strategy Type
a few other custom fields
We would like to have PO's with release strategy based on a particular Material Group [say X]. I have created a new Characteristic with respect to CEKKO-MATKL and added this characteristic to the same class.
I have created a new release code [HR] [we need a different person to sign off] and a new release strategy [TR] for which I have assigned the release code HR. In this release strategy, I have set it to get activated for a particular Material Group that does seem to work, but the remaining PO's are not getting triggered for other material groups. For other release strategies, I have left the material group field blank, because they need to be triggered for any material groups except X.
Could you please let me know if I am missing something or is there an alternate approach to this ?
Thank you,
Satish

Hi,
Obviously system will not trigger release strategy in ur case since in the classification data for other strategies u have left it blank excepting X for one strategy.
Since u have added a new characteristic Material group and assigned it to class then system expects an input for Material group for triggering release tab.If this is left blank then system by default will not trigger release strategy tab.
Solution:
First add all existing material groups in values tab of mat group characteristic then maintain the required set of material groups except X in other strategies in classification data.
Hope this is clear to you.
Regards,
Uzair

Workflow for purchase requisition release strategy

Hi all,
I need an urgent help on Workflow for Purchase Requisition Release. The requirement is that when a purchase requisition with a given combination (Purchasing Group, Material Group and Account Assignment Category) is created and saved, it should trigger a workflow for approval of release or rejection to one specific business manager. If he dont responds in 2 days, it should be sent to other business manager. If any one of them releases the requisition, it should send a mail to the requestor that the requisition is released. And if it is rejected, then also a mail to be sent to the requester informing that his requisition is rejected...
Can anyone take some pain and guide me step by step procedure to implement this or to use any existing one.... I know its BUS2009 thats used in this but really dont know how to implement it properly.
Its urgent...
Edited by: Hima on Apr 11, 2008 12:45 PM

Check this link
http://help.sap.com/saphelp_47x200/helpdata/en/04/92762546f311d189470000e829fbbd/frameset.htm
Thanks
Arghadip

Purchase Requisition Release strategy for MRP based Requisition

Hello Gurus
We want to set up the urchase Requisition Release strategy for MRP based Requisition ..Any can one Please share your experience about the impact down the road?
Thanks
Nick

Hi,
If you want include the MRP related PR in Release strategy.
You need to include the field CEBANESTKZ-Creation Indicator (Purchase Requisition/Schedule Lines) in one of the characteristics which you create and include the characteristics value as per the field values like AReal time, BMRP, CConverted Planned order etc.. and include the charactristic in the Release Strategy will release group & release codes.
So when ever the PR is created through MRP run then this creation indicator will update in the PR as per that release Strategy will trigger in the PR.
there is one more option you need to create the separate document type as MRP PR then create document type as characteristics and include the values of all these document types and include in Release strategy.
But it will not pop up for direct PR from MRP run only trigger when planned order is converted to PR manually there you need to select this MRP document type then release strategy will trigger.
I think first one is best suited.
rgds
Chidanand

Purchase order release strategy with a characteristic value as a variable

Hi all,
We have Purchase order release strategy based on the following characteristics:
Total Net Order Value
Purchasing Organization
a few other custom fields
We would like to add a characteristic based on the creator of the PO. In the purchasing department there are two person which have the authorization to create an release POs. The goal is now to check if the actual user, who release the PO, is different from the PO creator. The value of this characteristic may not be a fix value, it must be contain the name of the actual user name.
Is there are a possibility to insert the characteristic value as a variable such as SY-UNAME instead a fix value?
Thanks,
Charles

this is verymuch possible. You can use unsed fields user1, user2 etc in CEKKO or (ii) insert a new field in CEKKOZZ and use the new field. You need to build up logic in user-exit such that this field will take the value of person who had logged in. This can be done by ABAPer.
Hope this resolves ur problem

Tranposrt - Purchase Requisition Release Strategy with Classification

Similar Messages

Maybe you are looking for