Trans Code to check the Date of Termination in Setup Tables-Very Urgent!!

Hello BW Gurus,
I need to check the date of termination I have given while filling up the setup tables to verify when my delta loads would stop running. NPRT transaction code just gives me the time it took to fillup the tables but the date of termination is given as zero's, so please can someone let me know how to see that.
Thanks in advance,
Anjali
Message was edited by: Anjali

Hi,
If I understood it right, you wanted to predict when the actual date of termination would occur or you wanted to know what parameter you did input on the job that is now running?
Case 1:
As far as I know, that Info cannot exactly be determined since it will depend on various factors e.g. CPU speed, I.O. Speed, Amount of data to be process etc. etc. which I dont think SAP could predict as exact as possible (if ever an option was provided).
During the early stages of our project, we did that but we base the run time from history. Meaning, we always log (on top of existing SAP Job Logs) the run times in Excel and we somehow use that data to predict the actual Date of Termination.
Case 2:
In case you wanted to see the parameter while its running, I have no suggestion but for you to debug the currently running program.
In SM51, click the Active job and choose menu Program/Mode->Debugging. On the fields on the lower left portion, type RMCSNEUA-DATUM (got this value when you execute the Table Setup, say OLI9BW; Press F1 on the date of termination field) this would give you the actual date you have provided.
If I have helped, please grant points...
--Jkyle

Similar Messages

How shall I delete the data from R/3 setup tables

Hi Experts,
How shall I delete the data from R/3 setup tables
Regards
Sailekha

Hi Sailekha , to delete the set up table in r/3 either u can go to tcode LBWG as already mentioned or u can also delete the same from tcode SBIW
Settings for Application-Specific DataSources (PI) -
Logistics -
Managing Extract Structures -
Initialization -
Delete the Contents of the Setup Tables .
Just click the clock there then u hace toi juct give the application component name like for Inventory 3 , then execute it , it will delete the set up table for inventory ..
Regards..

How can I check the date of purchase for my MacBook Pro?

I need to fill out a claim in order to get OS X Mountain Lion and I need the date of purchase. I have tried putting in the serial code under check your service and support coverage but it just gave me a vague statement thatit was purchased mid 2012. Could someone please tell me how I can check the date of purchase?

Well, correction, just checked mine...
Tells you exipry date of warranty, simply take 1 year off of this or 3 if you have AppleCare.
There is your purchase date.

SAP Trans.Code-To view the previous month's OSP Report

Pl.mention the SAP trans.code for view the OSP status as on previous month.For an example,I want to see the status of OSP stocks as on 30.11.2010.How can I see?From MBLB,we can see the current OSP stock status.Is there any trans.Code for view the previous month OSP stock status?
Regards

hi,
there is no t code specific to your requirement, but you can get the details through MB51, by metioning repective date and movement types like 541,543 etc..
hope this will help..
Regards
Manohar

Need to check the data flow from R/3 to BW server.

Hi BI experts,
This query is regarding need to check the data flow from R/3 to BW server.
As of now I have some set of reports which I would need to take up in BW. The requirement is to go through the list of transaction codes for reports in R/3 and find out if there are already any existing objects in BW system which I can use for these reports.
So, can u plz help me.

Depends what are your Tcode or Reports users run in R/3 and they want the same in BW.Then in BI Content we have Out of the box Delivered reports.You can activate those Load data and use it.
Gimme T-codes you have I can send you Standard reports in BI or Cube you can get these from.
~AK

How to check the date and time when a material is blocked

Hello,
Please tell me how can i check the date and time when a material is blocked or unblocked.
Regards,
Priyanka

Hi Pryianka,
Are you speaking about blocked status of material master ('X-plant matl status' > MM03 > Basioc view 1; 'Plant-sp. matl status' > MM03 > MRP 1) or your problem is to find out the date when your material was booked into blocked state (stock category).
If your problem is about mmr you can use the above mentioned MM04 (or MM03 > menu > Environment > Display changes).
If your problem is to find out when your goods were posted to blocked stock you have to use MB51 + relevant movement types (e.g. 103, 344) + batch + etc. ()
BR
Csaba

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

HT4859 How can I verify that my App data is actually stored in iCloud. With Dropbox, I can actually see my stored files. With iCloud, itseems I'm supposed 2 just trust that Appl has the data. Short of doing a restore is there no way to check the data?

How can I verify that my App data is actually stored in the iCloud. I can see and access my notebook, contacts etc. on the iCloud website, and I can see my photos in a folder on my Windows-based desktop compter (iCloud/Photostream). But no app data.
With Dropbox, I can actually see all of my stored files. With iCloud, it seems, I'm supposed to just trust that Apple has my back. Short of deliberately trashing my app data and then attempting a restore, is there no way to check the data?

You can't access them on Windows (unless you have iCloud enabled Windows programs) and I don't think any are, yet.
iCloud data is accessed via Apps/Programs, the Windows programs vendors will have to step up (just to make it worse Microsoft have not yet enabled their Mac programs, such as Office yet) I doubt that iCloud access is much of a priority for them, complain to MS, when enough Windows users complain maybe they'll do something.

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

HT4623 I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. since the late os upgrace I have not been able to connect w

I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. Since the late os upgrace I have not been able to connect with face time.

Read http://support.apple.com/kb/ts3367

T.Code for checking the total value of a material

Hi Experts,
Can anybody tel me the T.code for checking the total value of a material which is procured in a specified period?
Thanks in advance
Channa

Refer Tcode ME80FN click on Change Veiw & select Purchase Order History with this you can get PO-GRN-INVOICE Qty & Value details
Last button on Application tool Bar it is in line of filter, total etc icons
Also check below reports :
MC$G - PURCHIS: Material PurchVal Selection
MC$0 - PURCHIS: PurchGrp PurchVal Selection
MC$< - PURCHIS: MatGrp PurchVal Selection
MC$4 - PURCHIS: Vendor PurchVal Selection

Check the date format

Hi,
Can anybody tell me how to check the date format in BDC while updating.
The system date format is like mm/dd/yyyy. Check the dates format, in case of error return the following message The date format should be YYYYMMDD.
Thanks......

Dear Anil,
This is a common problem, when carrying out BDC.
For example, while recording you met with the field --> MKPF-BUDAT.
Go to SE11 --> MKPF --> Search for BUDAT --> Double click on the Data Element i.e. BUDAT --> Double Click on the domain DATUM --> You can see under the block Output Characteristics : Output Length = 10.
While declaring the TYPES Structure, make it CHAR(10).
Consider this technique as the Rule-of-Thumb while doing BDC.
Regards,
Abir
Don't forget to award points *

TS1368 My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

Is there a possibility to check the date on which an app was re-installed?

I am aware of the purchase history which allows me to see when I first time installed a certain app, but when I delete that app from my iPhone then re-install it from the Cloud on another day, say X, the purchase history doesn't help me seeing this date X, which is for me the re-installation date.
Is there a possibility to check the date on which an app was re-installed?
Thank you

I read that you say the content should be deleted, so I still wonder if they get deleted, especially after I have just noticed this;
Install an App then delete it while it is running in the background. Head to the store again and install it, you will see that the app is still in the background.
I believe some records of the App exist after deleting it, regardless of who can access them. I will try checking with somebody who has a Jailbroken device.

Is thre any view to check the date & time of switch ovr frm prim to standby

Hi All,
Is there any view to check the date and time of switch over from primary to standby.
Thanks,

784786 wrote:
Which parameter of v$database can give us the switchover date and time. Please let me know?
SQL> desc v$database
Name                            Null?    Type
DBID                                  NUMBER
NAME                                  VARCHAR2(9)
CREATED                             DATE
RESETLOGS_CHANGE#                        NUMBER
RESETLOGS_TIME                         DATE
PRIOR_RESETLOGS_CHANGE#                   NUMBER
PRIOR_RESETLOGS_TIME                        DATE
LOG_MODE                             VARCHAR2(12)
CHECKPOINT_CHANGE#                        NUMBER
ARCHIVE_CHANGE#                        NUMBER
CONTROLFILE_TYPE                        VARCHAR2(7)
CONTROLFILE_CREATED                        DATE
CONTROLFILE_SEQUENCE#                        NUMBER
CONTROLFILE_CHANGE#                        NUMBER
CONTROLFILE_TIME                        DATE
OPEN_RESETLOGS                         VARCHAR2(11)
VERSION_TIME                             DATE
OPEN_MODE                             VARCHAR2(20)
PROTECTION_MODE                        VARCHAR2(20)
PROTECTION_LEVEL                        VARCHAR2(20)
REMOTE_ARCHIVE                         VARCHAR2(8)
ACTIVATION#                             NUMBER
SWITCHOVER#                             NUMBER
DATABASE_ROLE                             VARCHAR2(16)
ARCHIVELOG_CHANGE#                        NUMBER
ARCHIVELOG_COMPRESSION                    VARCHAR2(8)
SWITCHOVER_STATUS                        VARCHAR2(20)
DATAGUARD_BROKER                        VARCHAR2(8)
GUARD_STATUS                             VARCHAR2(7)
SUPPLEMENTAL_LOG_DATA_MIN                   VARCHAR2(8)
SUPPLEMENTAL_LOG_DATA_PK                   VARCHAR2(3)
SUPPLEMENTAL_LOG_DATA_UI                   VARCHAR2(3)
FORCE_LOGGING                             VARCHAR2(3)
PLATFORM_ID                             NUMBER
PLATFORM_NAME                             VARCHAR2(101)
RECOVERY_TARGET_INCARNATION#                   NUMBER
LAST_OPEN_INCARNATION#                    NUMBER
CURRENT_SCN                             NUMBER
FLASHBACK_ON                             VARCHAR2(18)
SUPPLEMENTAL_LOG_DATA_FK                   VARCHAR2(3)
SUPPLEMENTAL_LOG_DATA_ALL                   VARCHAR2(3)
DB_UNIQUE_NAME                         VARCHAR2(30)
STANDBY_BECAME_PRIMARY_SCN                   NUMBER
FS_FAILOVER_STATUS                        VARCHAR2(22)
FS_FAILOVER_CURRENT_TARGET                   VARCHAR2(30)
FS_FAILOVER_THRESHOLD                        NUMBER
FS_FAILOVER_OBSERVER_PRESENT                   VARCHAR2(7)
FS_FAILOVER_OBSERVER_HOST                   VARCHAR2(512)
CONTROLFILE_CONVERTED                        VARCHAR2(3)
PRIMARY_DB_UNIQUE_NAME                    VARCHAR2(30)
SUPPLEMENTAL_LOG_DATA_PL                   VARCHAR2(3)
MIN_REQUIRED_CAPTURE_CHANGE#                   NUMBERAre you admitting that after reviewing the content of this VIEW, that you see nothing that might contain the detail you desire?
The switch over is also logged to alert_SID.log on both Primary & Standby

Trans Code to check the Date of Termination in Setup Tables-Very Urgent!!

Similar Messages

Maybe you are looking for