Transact-SQL debugger not working in SQL Server 2008: "...debugger does not support SQL Server 2005 or earlier..."
I have recently installed SQL Server 2008. When I try to execute a query against an Access database, I receive this debugging error:
"Unable to start Transact-SQL debugger. The Transact-SQL debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors)"
Nor will the query execute; I get a transport-level error 0. Any thoughts?
Hi Davidmhjr,
>>Unable to start the Transact-SQL Debugger. The Transact-SQL Debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors).
Have you tried to restart the server once you have installed SQL Server 2008? As Naomi N mentioned please check the version of SQL Server you are using.
If you tried to connect to SQL Server 2005 from SQL Server 2008 SSMS, you would not be able to debug and get this error, it happens because T-SQL debugger includes both server-side and client-side components. The server-side debugger components are installed
with each instance of the SQL Server 2008 Database Engine. The client-side components are installed when you install the SQL Server 2008 client-side tools.
So it works with SQL Server 2008 only so far. Another way is you can triy to use SQL Server 2005 SSMS to connect to SQL Server 2005.
More information about configuration requirement to run T-SQL debugger as below, please refer:
There are no configuration requirements to run the Transact-SQL debugger when SQL Server Management Studio is running on the same computer as the instance of the SQL Server Database Engine. However, to run the Transact-SQL debugger when SQL Server Management
Studio is running on a different computer from the instance of the Database Engine, you must enable program and port exceptions by using the Windows Firewall Control Panel application on both computers.
On the computer that is running the instance of the Database Engine, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add the program sqlservr.exe to the exceptions list. By default, sqlservr.exe is installed in C:\Program Files\Microsoft SQL Server\MSSQL10.InstanceName\MSSQL\Binn, where InstanceName is MSSQLSERVER for the default instance, and the instance name for
any named instance.
•If the domain policy requires network communications to be done through IPsec, you must also add UDP port 4500 and UDP port 500 to the exception list.
On the computer that is running SQL Server Management Studio, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add program ssms.exe (SQL Server Management Studio) to the exceptions list. By default, ssms.exe is installed in C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE.
Hope it is helpful.
Regards, Amber zhang
Similar Messages
-
I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.
Go to Finder > Preferences then select the General tab
Make sure External disks is selected. -
in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
Tom at the Genius Bar told me that Option Delete would work. It does not.
I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry -
Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.asHi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ -
My tracking pad is not working. It controls itself and does not follow my finger commands. If I bring it to an apple store, would I be able to have a new pad installed?
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, take the computer to the Apple store to have it checked out
and repaired, if needed.
Best. -
I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?
so i'm using the usb mouseI want to clarify the issue.
The issue is with the MBP trackpad, and it works fine with an attached USB mouse.
With some ingenuity, you might be able to fix this yourself, but I suggest visiting your local Apple Store/Genius Bar. Some have fixed this issue and have posted their results online, but the Apple Store should be your first destination.
Post here with your results!! -
Robocopy on Windows Server 2008 SP2 does not copy folder permissions
When using Robocopy to copy folders and files from one local hard disk to another, using /COPYALL /E /TEE options, the target folder does not contain the source folder's ACL. I've tried other options such as: /COPY:DATSOU or /SECFIX, it made no difference.
Test scenario: Create a folder on C:, Test1. Add to Test1's permissions a local group with Read, e.g. Backup Operators. The ACL list should have permissions inherited from C:\ plus Backup Operators that's not inherited. Use Robocopy to copy Test1 to C:\Test2, check the ACL on Test2. Backup Operators is missing.
It looks like Robocopy cannot override the target folder's permissions inheritance, the folder retains the parent folder's ACL.
I've also disabled User Access Control in troubleshooting this problem.
To add to this issue, there's a workaround can be used to ensure the target folder's ACL is the same as the source folder's ACL. It's a two step process.
1) Use XCOPY source_folder target_folder /I /E /X /T - This lays down the directory structure including the ACLs
2) Use ROBOCOPY source_folder target_folder /COPYALL /SECFIX /E - This will copy over the directories and files, enforcing the files to receive the parent folder's ACL. The target_folder's ACL remain intact, unaltered from XCOPY command.
The end result: the target_folder ACL is identical to the source_folder ACL, the files copied to the target_folder will inherit ACL from their parent folder. Both source and target folders and files ACLs are identical.
ROBOCOPY should do both steps, but doesn't. I've tested this scenario on bare-bones Windows Server 2008, physical and virtual machines.
Darryl MillerTo Wendy23,
Just for clarity, the Windows Server 2008 OS that I ran ROBOCOPY and XCOPY on was the non-R2 version. Microsoft might have fixed this issue in R2.
You'll probably need to logon as local Administrator or use an account belonging to the local Administrators group.
Also, open the Command Prompt using "Run as Administrator" (right-click on Command Prompt), then run the XCOPY and ROBOCOPY commands from within this prompt.
To answer G.Write, the storage is local hard disks.
Thanks, was a long time ago, I was having a problem with robocopy not copying permissions on a SAN, and was wondering if the SAN was the problem, but your method worked fine for me, thanks. -
Acrobat X Pro not working, tryed to re-install and does not recognize Serial Number?
Acrobat X Pro not working, Serial Number not recognized?
Hi lv123321,
Do you have Acrobat only License no or is it a part of suite. If Acrobat X pro is a part of suite then you need to use the suite setup to install Acrobat.
Also if possible could you please private message me the serial no so I can try decoding it.
Regards,
Abhijit -
after restoring definitions iphone 3gs does not works
What do you mean by "restoring definitions"?
What EXACTLY is your problem?
"does not works" is just a bit vague. -
Server 2008 R2 does not show Internet Explorer 10/11 Group Policy options
Hello,
I have a Windows Server 2008 R2 server that has IE11 installed. I am attempting to create a GPO to control Proxy settings for IE10/11 clients, however, when I go to User Config>Preferences> Control Panel Settings> Internet Settings and Right click,
I do not see an option for IE10, only IE5 and 6, IE7, and IE8.
I have downloaded and installed the Administrative Templates for Internet Explorer from
here, and followed the installation instructions, but still, the option does not show up. I have ensured that all the latest Windows Updates are installed on the server, and rebooted
the server a couple times.
What am I missing here?
Thanks in advance.<meta content="text/html; charset=UTF-16" http-equiv="Content-Type" /><title>SFDN\testuser</title> <style type="text/css">body { background-color:#FFFFFF; border:1px solid #666666; color:#000000; font-size:68%;
font-family:MS Shell Dlg; margin:0,0,10px,0; word-break:normal; word-wrap:break-word; } table { font-size:100%; table-layout:fixed; width:100%; } td,th { overflow:visible; text-align:left; vertical-align:top; white-space:normal; } .title { background:#FFFFFF;
border:none; color:#333333; display:block; height:24px; margin:0px,0px,-1px,0px; padding-top:4px; ; table-layout:fixed; width:100%; z-index:5; } .he0_expanded { background-color:#FEF7D6; border:1px solid #BBBBBB; color:#3333CC; cursor:hand; display:block;
font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:0px; margin-right:0px; padding-left:8px; padding-right:5em; padding-top:4px; ; width:100%; } .he1_expanded { background-color:#A0BACB; border:1px solid
#BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:20px; margin-right:0px; padding-left:8px; padding-right:5em; padding-top:4px; ; width:100%; } .he1h_expanded
{ background-color: #7197B3; border: 1px solid #BBBBBB; color: #000000; cursor: hand; display: block; font-family: MS Shell Dlg; font-size: 100%; font-weight: bold; height: 2.25em; margin-bottom: -1px; margin-left: 10px; margin-right: 0px; padding-left: 8px;
padding-right: 5em; padding-top: 4px; ; width: 100%; } .he1 { background-color:#A0BACB; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:20px;
margin-right:0px; padding-left:8px; padding-right:5em; padding-top:4px; ; width:100%; } .he2 { background-color:#C0D2DE; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em;
margin-bottom:-1px; margin-left:30px; margin-right:0px; padding-left:8px; padding-right:5em; padding-top:4px; ; width:100%; } .he3 { background-color:#D9E3EA; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%;
font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:40px; margin-right:0px; padding-left:11px; padding-right:5em; padding-top:4px; ; width:100%; } .he4 { background-color:#E8E8E8; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block;
font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:50px; margin-right:0px; padding-left:11px; padding-right:5em; padding-top:4px; ; width:100%; } .he4h { background-color:#E8E8E8; border:1px solid #BBBBBB;
color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:55px; margin-right:0px; padding-left:11px; padding-right:5em; padding-top:4px; ; width:100%; } .he4i { background-color:#F9F9F9;
border:1px solid #BBBBBB; color:#000000; display:block; font-family:MS Shell Dlg; font-size:100%; margin-bottom:-1px; margin-left:55px; margin-right:0px; padding-bottom:5px; padding-left:21px; padding-top:4px; ; width:100%; } .he5 { background-color:#E8E8E8;
border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:60px; margin-right:0px; padding-left:11px; padding-right:5em; padding-top:4px; ;
width:100%; } .he5h { background-color:#E8E8E8; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; padding-left:11px; padding-right:5em; padding-top:4px; margin-bottom:-1px; margin-left:65px; margin-right:0px;
; width:100%; } .he5i { background-color:#F9F9F9; border:1px solid #BBBBBB; color:#000000; display:block; font-family:MS Shell Dlg; font-size:100%; margin-bottom:-1px; margin-left:65px; margin-right:0px; padding-left:21px; padding-bottom:5px; padding-top:
4px; ; width:100%; } DIV .expando { color:#000000; text-decoration:none; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:normal; ; right:10px; text-decoration:underline; z-index: 0; } .he0 .expando { font-size:100%; } .info, .info3, .info4,
.disalign { line-height:1.6em; padding:0px,0px,0px,0px; margin:0px,0px,0px,0px; } .disalign TD { padding-bottom:5px; padding-right:10px; } .info TD { padding-right:10px; width:50%; } .info3 TD { padding-right:10px; width:33%; } .info4 TD, .info4 TH { padding-right:10px;
width:25%; } .info TH, .info3 TH, .info4 TH, .disalign TH { border-bottom:1px solid #CCCCCC; padding-right:10px; } .subtable, .subtable3 { border:1px solid #CCCCCC; margin-left:0px; background:#FFFFFF; margin-bottom:10px; } .subtable TD, .subtable3 TD { padding-left:10px;
padding-right:5px; padding-top:3px; padding-bottom:3px; line-height:1.1em; width:10%; } .subtable TH, .subtable3 TH { border-bottom:1px solid #CCCCCC; font-weight:normal; padding-left:10px; line-height:1.6em; } .subtable .footnote { border-top:1px solid #CCCCCC;
} .subtable3 .footnote, .subtable .footnote { border-top:1px solid #CCCCCC; } .subtable_frame { background:#D9E3EA; border:1px solid #CCCCCC; margin-bottom:10px; margin-left:15px; } .subtable_frame TD { line-height:1.1em; padding-bottom:3px; padding-left:10px;
padding-right:15px; padding-top:3px; } .subtable_frame TH { border-bottom:1px solid #CCCCCC; font-weight:normal; padding-left:10px; line-height:1.6em; } .subtableInnerHead { border-bottom:1px solid #CCCCCC; border-top:1px solid #CCCCCC; } .explainlink { color:#000000;
text-decoration:none; cursor:hand; } .explainlink:hover { color:#0000FF; text-decoration:underline; } .spacer { background:transparent; border:1px solid #BBBBBB; color:#FFFFFF; display:block; font-family:MS Shell Dlg; font-size:100%; height:10px; margin-bottom:-1px;
margin-left:43px; margin-right:0px; padding-top: 4px; ; } .filler { background:transparent; border:none; color:#FFFFFF; display:block; font:100% MS Shell Dlg; line-height:8px; margin-bottom:-1px; margin-left:53px; margin-right:0px; padding-top:4px; ; } .container
{ display:block; ; } .rsopheader { background-color:#A0BACB; border-bottom:1px solid black; color:#333333; font-family:MS Shell Dlg; font-size:130%; font-weight:bold; padding-bottom:5px; text-align:center; } .rsopname { color:#333333; font-family:MS Shell
Dlg; font-size:130%; font-weight:bold; padding-left:11px; } .gponame{ color:#333333; font-family:MS Shell Dlg; font-size:130%; font-weight:bold; padding-left:11px; } .gpotype{ color:#333333; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; padding-left:11px;
} #uri { color:#333333; font-family:MS Shell Dlg; font-size:100%; padding-left:11px; } #dtstamp{ color:#333333; font-family:MS Shell Dlg; font-size:100%; padding-left:11px; text-align:left; width:30%; } #objshowhide { color:#000000; cursor:hand; font-family:MS
Shell Dlg; font-size:100%; font-weight:bold; margin-right:0px; padding-right:10px; text-align:right; text-decoration:underline; z-index:2; word-wrap:normal; } #gposummary { display:block; } #gpoinformation { display:block; } @media print { #objshowhide{ display:none;
} body { color:#000000; border:1px solid #000000; } .title { color:#000000; border:1px solid #000000; } .he0_expanded { color:#000000; border:1px solid #000000; } .he1h_expanded { color:#000000; border:1px solid #000000; } .he1_expanded { color:#000000; border:1px
solid #000000; } .he1 { color:#000000; border:1px solid #000000; } .he2 { color:#000000; background:#EEEEEE; border:1px solid #000000; } .he3 { color:#000000; border:1px solid #000000; } .he4 { color:#000000; border:1px solid #000000; } .he4h { color:#000000;
border:1px solid #000000; } .he4i { color:#000000; border:1px solid #000000; } .he5 { color:#000000; border:1px solid #000000; } .he5h { color:#000000; border:1px solid #000000; } .he5i { color:#000000; border:1px solid #000000; } } v\:* {behavior:url(#default#VML);}
</style> <script language="vbscript"> <!-- '================================================================================ ' String "strShowHide(0/1)" ' 0 = Hide all mode. ' 1 = Show all mode. strShowHide = 1 'Localized
strings strShow = "show" strHide = "hide" strShowAll = "show all" strHideAll = "hide all" strShown = "shown" strHidden = "hidden" strExpandoNumPixelsFromEdge = "10px" Function IsSectionHeader(obj)
IsSectionHeader = (obj.className = "he0_expanded") Or (obj.className = "he1h_expanded") Or (obj.className = "he1_expanded") Or (obj.className = "he1") Or (obj.className = "he2") Or (obj.className = "he3")
Or (obj.className = "he4") Or (obj.className = "he4h") Or (obj.className = "he5") Or (obj.className = "he5h") End Function Function IsSectionExpandedByDefault(objHeader) IsSectionExpandedByDefault = (Right(objHeader.className,
Len("_expanded")) = "_expanded") End Function ' strState must be show | hide | toggle Sub SetSectionState(objHeader, strState) ' Get the container object for the section. It's the first one after the header obj. i = objHeader.sourceIndex
Set all = objHeader.parentElement.document.all While (all(i).className <> "container") i = i + 1 Wend Set objContainer = all(i) If strState = "toggle" Then If objContainer.style.display = "none" Then SetSectionState
objHeader, "show" Else SetSectionState objHeader, "hide" End If Else Set objExpando = objHeader.children.item(1) If strState = "show" Then objContainer.style.display = "block" objExpando.innerText = strHide ElseIf strState
= "hide" Then objContainer.style.display = "none" objExpando.innerText = strShow End If End If End Sub Sub ShowSection(objHeader) SetSectionState objHeader, "show" End Sub Sub HideSection(objHeader) SetSectionState objHeader,
"hide" End Sub Sub ToggleSection(objHeader) SetSectionState objHeader, "toggle" End Sub '================================================================================ ' When user clicks anywhere in the document body, determine if user
is clicking ' on a header element. '================================================================================ Function document_onclick() Set strsrc = window.event.srcElement While (strsrc.className = "sectionTitle" Or strsrc.className = "expando"
Or strsrc.className = "vmlimage") Set strsrc = strsrc.parentElement Wend ' Only handle clicks on headers. If Not IsSectionHeader(strsrc) Then Exit Function ToggleSection strsrc window.event.returnValue = False End Function '================================================================================
' link at the top of the page to collapse/expand all collapsable elements '================================================================================ Function objshowhide_onClick() Set objBody = document.body.all Select Case strShowHide Case 0 strShowHide
= 1 objshowhide.innerText = strShowAll For Each obji In objBody If IsSectionHeader(obji) Then HideSection obji End If Next Case 1 strShowHide = 0 objshowhide.innerText = strHideAll For Each obji In objBody If IsSectionHeader(obji) Then ShowSection obji End
If Next End Select End Function '================================================================================ ' onload collapse all except the first two levels of headers (he0, he1) '================================================================================
Function window_onload() ' Only initialize once. The UI may reinsert a report into the webbrowser control, ' firing onLoad multiple times. If UCase(document.documentElement.getAttribute("gpmc_reportInitialized")) <> "TRUE" Then '
Set text direction Call fDetDir(UCase(document.dir)) ' Initialize sections to default expanded/collapsed state. Set objBody = document.body.all For Each obji in objBody If IsSectionHeader(obji) Then If IsSectionExpandedByDefault(obji) Then ShowSection obji
Else HideSection obji End If End If Next objshowhide.innerText = strShowAll document.documentElement.setAttribute "gpmc_reportInitialized", "true" End If End Function '================================================================================
' When direction (LTR/RTL) changes, change adjust for readability '================================================================================ Function document_onPropertyChange() If window.event.propertyName = "dir" Then Call fDetDir(UCase(document.dir))
End If End Function Function fDetDir(strDir) strDir = UCase(strDir) Select Case strDir Case "LTR" Set colRules = document.styleSheets(0).rules For i = 0 To colRules.length -1 Set nug = colRules.item(i) strClass = nug.selectorText If nug.style.textAlign
= "right" Then nug.style.textAlign = "left" End If Select Case strClass Case "DIV .expando" nug.style.Left = "" nug.style.right = strExpandoNumPixelsFromEdge Case "#objshowhide" nug.style.textAlign = "right"
End Select Next Case "RTL" Set colRules = document.styleSheets(0).rules For i = 0 To colRules.length -1 Set nug = colRules.item(i) strClass = nug.selectorText If nug.style.textAlign = "left" Then nug.style.textAlign = "right"
End If Select Case strClass Case "DIV .expando" nug.style.Left = strExpandoNumPixelsFromEdge nug.style.right = "" Case "#objshowhide" nug.style.textAlign = "left" End Select Next End Select End Function '================================================================================
'When printing reports, if a given section is expanded, let's says "shown" (instead of "hide" in the UI). '================================================================================ Function window_onbeforeprint() For Each obji In
document.all If obji.className = "expando" Then If obji.innerText = strHide Then obji.innerText = strShown If obji.innerText = strShow Then obji.innerText = strHidden End If Next End Function '================================================================================
'If a section is collapsed, change to "hidden" in the printout (instead of "show"). '================================================================================ Function window_onafterprint() For Each obji In document.all If obji.className
= "expando" Then If obji.innerText = strShown Then obji.innerText = strHide If obji.innerText = strHidden Then obji.innerText = strShow End If Next End Function '================================================================================ ' Adding
keypress support for accessibility '================================================================================ Function document_onKeyPress() If window.event.keyCode = "32" Or window.event.keyCode = "13" Or window.event.keyCode =
"10" Then 'space bar (32) or carriage return (13) or line feed (10) If window.event.srcElement.className = "expando" Then Call document_onclick() : window.event.returnValue = false If window.event.srcElement.className = "sectionTitle"
Then Call document_onclick() : window.event.returnValue = false If window.event.srcElement.id = "objshowhide" Then Call objshowhide_onClick() : window.event.returnValue = false End If End Function --> </script> <script language="javascript">
<!-- function getExplainWindowTitle() { return document.getElementById("explainText_windowTitle").innerHTML; } function getExplainWindowStyles() { return document.getElementById("explainText_windowStyles").innerHTML; } function getExplainWindowSettingPathLabel()
{ return document.getElementById("explainText_settingPathLabel").innerHTML; } function getExplainWindowExplainTextLabel() { return document.getElementById("explainText_explainTextLabel").innerHTML; } function getExplainWindowPrintButton()
{ return document.getElementById("explainText_printButton").innerHTML; } function getExplainWindowCloseButton() { return document.getElementById("explainText_closeButton").innerHTML; } function getNoExplainTextAvailable() { return document.getElementById("explainText_noExplainTextAvailable").innerHTML;
} function getExplainWindowSupportedLabel() { return document.getElementById("explainText_supportedLabel").innerHTML; } function getNoSupportedTextAvailable() { return document.getElementById("explainText_noSupportedTextAvailable").innerHTML;
} function showExplainText(srcElement) { var strSettingName = srcElement.getAttribute("gpmc_settingName"); var strSettingPath = srcElement.getAttribute("gpmc_settingPath"); var strSettingDescription = srcElement.getAttribute("gpmc_settingDescription");
if (strSettingDescription == "") { strSettingDescription = getNoExplainTextAvailable(); } var strSupported = srcElement.getAttribute("gpmc_supported"); if (strSupported == "") { strSupported = getNoSupportedTextAvailable(); }
var strHtml = "<html>\n"; strHtml += "<head>\n"; strHtml += "<title>" + getExplainWindowTitle() + "</title>\n"; strHtml += "<style type='text/css'>\n" +
getExplainWindowStyles() + "</style>\n"; strHtml += "</head>\n"; strHtml += "<body>\n"; strHtml += "<div class='head'>" + strSettingName +"</div>\n"; strHtml
+= "<div class='path'><b>" + getExplainWindowSettingPathLabel() + "</b><br/>" + strSettingPath +"</div>\n"; strHtml += "<div class='path'><b>" + getExplainWindowSupportedLabel()
+ "</b><br/>" + strSupported +"</div>\n"; strHtml += "<div class='info'>\n"; strHtml += "<div class='hdr'>" + getExplainWindowExplainTextLabel() + "</div>\n";
strHtml += "<div class='bdy'>" + strSettingDescription + "</div>\n"; strHtml += "<div class='btn'>"; strHtml += getExplainWindowPrintButton(); strHtml += getExplainWindowCloseButton();
strHtml += "</div></body></html>"; var strDiagArgs = "height=360px, width=630px, status=no, toolbar=no, scrollbars=yes, resizable=yes "; var expWin = window.open("", "expWin", strDiagArgs); expWin.document.write("");
expWin.document.close(); expWin.document.write(strHtml); expWin.document.close(); expWin.focus(); //cancels navigation for IE. if(navigator.userAgent.indexOf("MSIE") > 0) { window.event.returnValue = false; } return false; } --> </script>
Group Policy Management
body { font-size:68%;font-family:MS Shell Dlg; margin:0px,0px,0px,0px; border: 1px solid #666666; background:#F6F6F6; width:100%; word-break:normal; word-wrap:break-word; } .head { font-weight:bold; font-size:160%; font-family:MS
Shell Dlg; width:100%; color:#6587DC; background:#E3EAF9; border:1px solid #5582D2; padding- height:24px; } .path { margin- margin- margin-bottom:5px;width:100%; } .info { padding-width:100%; } table { font-size:100%; width:100%; border:1px solid #999999;
} th { border-bottom:1px solid #999999; text-align:left; padding- height:24px; } td { background:#FFFFFF; padding- padding-bottom:10px; padding- } .btn { width:100%; text-align:right; margin- } .hdr { font-weight:bold; border:1px solid #999999; text-align:left;
padding- padding- height:24px; margin-bottom:-1px; width:100%; } .bdy { width:100%; height:182px; display:block; background:#FFFFFF; padding- padding-bottom:10px; padding- border:1px solid #999999; } button { width:6.9em; height:2.1em; font-size:100%; font-family:MS
Shell Dlg; margin-right:15px; } @media print { .bdy { display:block; } button { display:none; } .head { color:#000000; background:#FFFFFF; border:1px solid #000000; } }
Setting Path:
Explanation
<button accesskey="P" name="Print" onclick="window.print()">Print</button>
<button accesskey="C" name="Close" onclick="window.close()">Close</button>
No explanation is available for this setting.
Supported On:
Not available
Group Policy Results
SFDN\testuser
Data collected on: 12/14/2014 1:00:12 PM
Summary
Computer Configuration Summary
No data available.
User Configuration Summary
General
User name
SFDN\testuser
Domain
SFD.local
Last time Group Policy was processed
12/14/2014 12:59:22 PM
Group Policy Objects
Applied GPOs
Name
Link Location
Revision
Local Group Policy
Local
AD (1), Sysvol (1)
Default Domain Policy
SFD.local
AD (6), Sysvol (6)
Test
SFD.local/SFD-Restricted-Users
AD (10), Sysvol (10)
Limit Downloads
SFD.local/SFD-Restricted-Users
AD (2), Sysvol (2)
SFD Restricted Users
SFD.local/SFD-Restricted-Users
AD (59), Sysvol (59)
Denied GPOs
Name
Link Location
Reason Denied
None
Security Group Membership when Group Policy was applied
SFDN\Domain Users
Everyone
BUILTIN\Users
NT AUTHORITY\INTERACTIVE
CONSOLE LOGON
NT AUTHORITY\Authenticated Users
NT AUTHORITY\This Organization
LOCAL
Mandatory Label\Medium Mandatory Level
WMI Filters
Name
Value
Reference GPO(s)
None
Component Status <v:group alt="Warning" class="vmlimage" coordsize="100,100" style="width:15px;height:15px;vertical-align:middle;"><v:shape class="vmlimage" fillcolor="yellow"
strokecolor="yellow" style="width:100;height:100;"><v:path v="m 50,0 l 0,99 99,99 x e"></v:path></v:shape> <v:rect class="vmlimage" fillcolor="black" strokecolor="black" style="width:10;height:35;"></v:rect>
<v:rect class="vmlimage" fillcolor="black" strokecolor="black" style="width:10;height:5;"></v:rect> </v:group>
Component Name
Status
Last Process Time
Group Policy Infrastructure
Success
12/14/2014 12:59:46 PM
Folder Redirection
Failed
12/14/2014 12:59:46 PM
Folder Redirection failed due to the error listed below.
Cannot complete this function.
Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 12/14/2014 12:59:23 PM and 12/14/2014 12:59:46 PM.
Group Policy Internet Settings
Success
12/14/2014 12:59:46 PM
Registry
Success
12/12/2014 10:28:23 AM
Computer Configuration
No data available.
User Configuration
Policies
Windows Settings
Security Settings
Software Restriction Policies
Winning GPO
SFD Restricted Users
Enforcement
Policy
Setting
Apply software restriction policies to the following
All software files except libraries (such as DLLs)
Apply software restriction policies to the following users
All users
When applying software restriction policies
Ignore certificate rules
Designated File Types
File Extension
File Type
ADE
Microsoft Access Project Extension
ADP
Microsoft Access Project
BAS
BAS File
BAT
Windows Batch File
CHM
Compiled HTML Help file
CMD
Windows Command Script
COM
MS-DOS Application
CPL
Control panel item
CRT
Security Certificate
EXE
Application
HLP
Help file
HTA
HTML Application
INF
Setup Information
INS
INS File
ISP
ISP File
LNK
Shortcut
MDB
Microsoft Access Database
MDE
Microsoft Access MDE Database
MSC
Microsoft Common Console Document
MSI
Windows Installer Package
MSP
Windows Installer Patch
MST
MST File
OCX
ActiveX control
PCD
PCD File
PIF
Shortcut to MS-DOS Program
REG
Registration Entries
SCR
Screen saver
SHS
SHS File
URL
Internet Shortcut
VB
VB File
WSC
Windows Script Component
Trusted Publishers
Trusted publisher management
Allow all administrators and users to manage user's own Trusted Publishers
Certificate verification
None
Software Restriction Policies/Security Levels
Policy
Setting
Winning GPO
Default Security Level
Unrestricted
SFD Restricted Users
Software Restriction Policies/Additional Rules
Path Rules
%HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRoot%
Security Level
Unrestricted
Description
Date last modified
9/30/2011 12:34:27 PM
Winning GPO
SFD Restricted Users
%HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\ProgramFilesDir%
Security Level
Unrestricted
Description
Date last modified
9/30/2011 12:34:27 PM
Winning GPO
SFD Restricted Users
Administrative Templates
Policy definitions (ADMX files) retrieved from the local machine.
Control Panel
Policy
Setting
Winning GPO
Network/Network Connections
Policy
Setting
Winning GPO
This setting determines whether the Properties menu item is enabled, and thus, whether the Local Area Connection Properties dialog box is available to users.
If you enable this setting (and enable the "Enable Network Connections settings for Administrators" setting), the Properties menu items are disabled for all users, and users cannot open the Local Area Connection Properties dialog box.
Important: If the "Enable Network Connections settings for Administrators" is disabled or not configured, this setting will not apply to administrators on post-Windows 2000 computers.
If you disable this setting or do not configure it, a Properties menu item appears when users right-click the icon representing a LAN connection. Also, when users select the connection, Properties is enabled on the File menu.
Note: This setting takes precedence over settings that manipulate the availability of features inside the Local Area Connection Properties dialog box. If this setting is enabled, nothing within the properties dialog box for a LAN connection is available to
users.
Note: Nonadministrators have the right to view the properties dialog box for a connection but not to make changes, regardless of this setting." gpmc_settingname="Prohibit access to properties of a LAN connection" gpmc_settingpath="User Configuration/Administrative
Templates/Network/Network Connections" gpmc_supported="At least Windows 2000 Service Pack 1" href="javascript:void();" onclick="javascript:showExplainText(this); return false;">Prohibit access to properties of a LAN connection
Enabled
SFD Restricted Users
If you enable this setting (and enable the "Enable Network Connections settings for Administrators" setting), the check boxes for enabling and disabling components are disabled. As a result, administrators cannot enable or disable the components that
a connection uses.
Important: If the "Enable Network Connections settings for Administrators" is disabled or not configured, this setting will not apply to administrators on post-Windows 2000 computers.
If you disable this setting or do not configure it, the Properties dialog box for a connection includes a check box beside the name of each component that the connection uses. Selecting the check box enables the component, and clearing the check box disables
the component.
Note: When the "Prohibit access to properties of a LAN connection" setting is enabled, users are blocked from accessing the check boxes for enabling and disabling the components of a LAN connection.
Note: Nonadministrators are already prohibited from enabling or disabling components for a LAN connection, regardless of this setting." gpmc_settingname="Prohibit Enabling/Disabling components of a LAN connection" gpmc_settingpath="User
Configuration/Administrative Templates/Network/Network Connections" gpmc_supported="Microsoft Windows Server 2003, Windows XP, and Windows 2000 Service Pack 1 operating systems only" href="javascript:void();" onclick="javascript:showExplainText(this);
return false;">Prohibit Enabling/Disabling components of a LAN connection
Enabled
SFD Restricted Users
Windows Components/Internet Explorer
Policy
Setting
Winning GPO
If you enable this policy setting, the user will not be able to configure proxy settings.
If you disable or do not configure this policy setting, the user can configure proxy settings." gpmc_settingname="Prevent changing proxy settings" gpmc_settingpath="User Configuration/Administrative Templates/Windows Components/Internet
Explorer" gpmc_supported="At least Internet Explorer 5.0" href="javascript:void();" onclick="javascript:showExplainText(this); return false;">Prevent changing proxy settings
Enabled
SFD Restricted Users
Windows Components/Internet Explorer/Internet Control Panel/Security Page/Internet Zone
Policy
Setting
Winning GPO
Allow file downloads
Disable
Extra Registry Settings
Display names for some settings cannot be found. You might be able to resolve this issue by updating the .ADM files used by Group Policy Management.
Setting
State
Winning GPO
Software\Policies\Microsoft\office\14.0\outlook\ForceOSTPath
P:\My Documents\Outlook Files
SFD Restricted Users
Software\Policies\Microsoft\office\14.0\outlook\ForcePSTPath
P:\My Documents\Outlook Files
SFD Restricted Users -
Windows Server 2008 R2 Does not boot When Back up drive removed
I have a windows Server 2008 R2 Standard server RAID 10 installed. I have a non raid drive installed as the backup HD. The Backup drive is now failing. When I went to switch it with a new one the system does not boot and is asking for
a boot drive. I have been searching for solutions and cannot find any. Any ideas?Hi,
Could you confirm if your boot volume is on that non-RAID disk (maybe 2 volumes on that disk and one of them is the boot volume)?
At current situation, first please test to connect the failed disk back to the device and see if it will help.
Or you may need to run a boot-up repair with an installation disk.
If you have any feedback on our support, please send to [email protected] -
I am using Macbook air 13". i have installed windows 7 professional on it. I downloaded windows support drivers using bootcamp. Even after installation of drivers my trackpad does not works. Tap & swipe features does not work.i am using a wireless mouse. Also there is no light in my keyboard anymore.
I did try all possible help i could found on internet. But no go.Hi Thank you, the apple mobile service links did not work, i had tried them all. however that same link with the previous versions worked. I had to download the one below and I can at least use itunes.
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
I tried this one but it did not work.
iTunes 12.1.0.71 for Windows (64-bit) - itunes6464setup.exe(2015-01-28) -
I am unable to power up my Mac pro desktop. I have tried resenting the smc and still does not work...any suggestions?
The warranty is worldwide. You should not need your receipt, Apple will have a purchase record - or at least a manufacturing date record and you should not be even close to the end of the one year warranty.
In Thailand the support phone number is 001800 4412904
In Canada call English: 1-800-263-3394 or French: 1-800-263-3394
Are you using the Canadian support site? www.apple.com/ca -
How do I close programs with IOS 7? The old way of closing programs by double tapping on the button, holding down an icon until it started shaking and a red X appears does not work. Every program I opened appears. Turning on and off the phone does nopt work.
I just found out. Above the icon is a copy of the open page of the program(s). You slide the pages up to close.
-
After I installed the latest OS X Yosemite my USB drive is not loading any files or folders which is located in it. Sometime it just show a blank window and sometime it shows folders and files but not clickable.
I have same problem but didn't find solution… If I put USB drive no files shown on finder… But If I use ForkLift files are showing but only in Forklift…
Need some clue how to fix it... -
Macbook pro 2012 does not work after update, macbook pro 2012 does not work after update
After 6 weeks i started my macbook and installed q new update now it has a problem to start and restarts all the time again and again
Make certain that your MBP is connected to an AC source and is charging or charged.
Then try a SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.
Maybe you are looking for
-
Making a bonging sound at start up
As of yesterday morning when starting up my iMac it highlights the HD drive and then makes this random bonging sound like a repeating drum sound. I press the escape button and that does the trick. Then I can be using the computer for a while and then
-
JDev extension SDK: How to refresh navigator via API?
Hi, I'm developing a jdev extension, in which I create some files in the project source folder manually (in file system). These changes are not displayed in the projects navigator tree (of course). Is it possible to refresh the navigator view via SDK
-
Magic Bullet Looks, Why not GPU?
Why these kind of plugins are not GPU accelrated, Its very hard to work on 1980x1080 footage if u apply MBL. Even CS6 can't do any magic on this. I heard somwhere in FCP, MBL runs like butter.
-
Muse crashes everytime I go to publish and says no such Id in the Mapping ?
When I go to publish a muse site it stops at 41% everytime and says there is no such Id in the mapping .. this is crazy .. please can someone tell me how to fix this..
-
Tried to add JUnit Test in Eclipse -- "Test type does not exist" error
Hi guys, I'm developing an assignment whose details I won't bother going into -- it's enough to say that we were introduced to JUnit testing a couple of weeks ago in university tutorials, and I've stupidly tried to add one to my project without fully