Transaction 0000000244 cannot be delivered

Hi when i am going the delivery , system is showing the   floowoing error
Transaction 0000000244 cannot be delivered
Message no. VL003
so please  suggest, i need check check on e deliverbale to day pleaseeeee

Dear Siva,
Check in VA02 document flow, what is the status? when creating delivey in vl01n, choose the "Required Delivery date" same as in your sales order and the proper Shipping Point. Also check if there is stock in MMBE, under unrestricted use.
Reward if useful.
Regards.
Venkat - Hyd
Edited by: yajee venkat on Jul 7, 2008 4:52 PM

Similar Messages

  • Transaction 0000000245 cannot be delivered

    Hi,
    When i am doing the delivery , i am getting one error
    Transaction 0000000245 cannot be delivered
    Message no. VL003
    please advice
    urgent
    RAMESH k

    Hi,
    Please check whethere that item is relevant for schedule lines or not in item category for that item in VOV7..
    Also please check already delviery has been created for that order through document flow...
    Regards
    sankar

  • Order cannot be delivered

    Hi Experts,
    Please help. Basically PP consultant.
    While doing delivery in VL01N I am facing following error.
    Order cannot be delivered
    Diagnosis
    Possible reasons include:
    The copy conditions specified in Specify copy control for deliveries do not allow the order to be delivered.
    The order is blocked for delivery.
    The order document is incomplete.
    Procedure
    Pay attention to any notes that may be recorded in the log.
    You can display the copying requirements defined for this transaction in Customizing.
    How to solve this.
    Edited by: Raja S on Jan 13, 2009 7:13 AM

    Hi Raja
    Your assignment and all settings seems to be correct
    There are a few checks
    1.In CMR also pls check whether you have maintained delivering plant as 2222 in the shipping tab
    2.In MMR have you maintained delivering plant as 2222 in sales org data 1 tab
    3.In OVL2 have you assigned shipping pt as 2222 for the delivering plant 2222. shipping conditions 01 and loading group 0001
    Are you seeing those entries?
    Mainly in OVL2 are you seeing your entry
    If all these are correct pls log off from SAP and relog after 1 minute and once again create the sales order
    Make sure that you are putting the right customer and right material(by oversight there can be a mistake)
    After inputting the material choose the line item and go to item details and check whether you are getting delivering plant as 2222 and shipping point as 2222 in the shipping tab automatically
    It has to come automatically
    If doesnt come automatically pls enter these manually and see any error comes and post that error msg
    It has to come automatically ,not coming still throwing error means there is some program error only
    _After seeing your error in the sales order
    In t code OVL3 for your delivering plant, shipping pt,and storage conditions from MMR maintain the storage location as 0002 and then try
    Regards
    Raja
    Edited by: ramanathan raja on Jan 13, 2009 5:37 PM

  • Batch 0000000521 was proposed from initial transaction and cannot be change

    Dear All,
    My business process is we create new batch to replace/substitute the delivered batch when customer return is happen (in outbound delivery process).
    that condition is running well when the return sales order not refer to billing document (billing document for previous sales order).
    But when the return sales order refer to billing document (billing document for previous sales order), the old batch (batch that delivered) cannot change. there is error message when i try to change the batch :
    "Batch 0000000521 was proposed from initial transaction and cannot be changed"
    What should i do fix it ?
    Thanks & Regards,
    Saiful arif

    Hi,
    In T.code VTAF, go to the source and target document type and then go to the item details.
    There you can find a box Donot copy batch, check the box and save.
    Create a new return with reference to billing document and check now.
    Regards

  • TPVS Optimizer error: "orders cannot be delivered"

    When executing TPVS Optimizer the optimization comes out with a high number of orders "that cannot be delivered". This is an initial message that appears just before it starts the capacity check.
    At the log register this message is showed as green.
    In fact that is not a problem of capacity or resource availability as when I filter only that specifics orders that weren't schedule before, the Optimizer is able to delivery any order.
    I suspect that somehow this orders are "stucked" as dirty in some internal table, due to previous optimizations. In other tests when I copied the resources (load and vehicle) and set the new resource to the Optimization Profile, the orders where delivered. But this artifice is not working anymore.
    I've already opened an OSS for SAP but they answered with Note 847234 that indicates a SCM Optimization Consulting service from SAP.

    Hi Sandeep!
    Thanks a lot for your answer, it was very helpfull.
    I've tried VSCC and system consistency check. I also had sufficient vehicles available for the optimizer to plan the shipments.
    Actually I was able to schedule all orders again after creating new resources** as copies from the original ones and assigning them to the model.
    **Vehicles and loading resources - outbound at the shipping point and inbound at customers, delivery point
    As I said, this problem had happened before and at the next time it occurs I will try to use transaction SM12.
    I'll let you know the result.
    Best Regards,
    Marina Carvalho
    Edited by: Marina Carvalho on Mar 13, 2009 6:58 PM

  • This email cannot be delivered to user@domain because the email address is no longer valid

    We have Exchange 2010 and Office 2010 clients. All of our users are experiencing problems when trying to send e-mails to a customer domain. After typing the email address in, a message immediately appears saying: This email cannot be delivered to
    user@domain because the email address is no longer valid. If we proceed and send the message anyway, we get the NDR shown below. I have tested from a Hotmail account and the recipient is receiving those mails
    fine, the problem is for any user at the recipients domain and from any user at our domain, I have tried using OWA and the same problem so I know it is not the cache. Does any one have any ideas as I have been pulling my hair out  ! Thanks.
    Delivery has failed to these recipients or groups:
    [email protected]
    The email address that you entered couldn't be found. Check the address and try resending the message. If the problem continues, please contact your helpdesk.
    Diagnostic information for administrators:
    Generating server:
    xxx-sbs.xxx.local
    [email protected]
    #550 5.1.1 RESOLVER.ADR.RecipNotFound; not found ##
    Original message headers:
    Received: from
    xxx-sbs.xxx.local ([fe80::4bbd:1665:5716:1dae]) by
     xxx-sbs.xxx.local ([fe80::4bbd:1665:5716:1dae%10]) with mapi id
     14.02.0387.000; Wed, 14 May 2014 15:35:42 +0100
    Content-Type: application/ms-tnef; name="winmail.dat"
    Content-Transfer-Encoding: binary
    From: SENDE (SENDER EMAIL ADDRESS)
    To: "RECIPIENT EMAIL ADDRESS
    Subject: SCAN ATTACHED
    Thread-Topic: SCAN ATTACHED
    Thread-Index: Ac9vgcUbgbouRWzgTjS5UqGhPHduZQ==
    Date: Wed, 14 May 2014 15:35:41 +0100
    Message-ID: <F645248CCF819B4FA674E2F35CC71EE602ADF254@ xxx-sbs.xxx.local>
    Accept-Language: en-GB, en-US
    Content-Language: en-US
    X-MS-Has-Attach: yes
    X-MS-TNEF-Correlator: <[email protected]>
    MIME-Version: 1.0
    X-Originating-IP: [192.168.16.20]
     

    Hi,
    Do you mean your domain users can’t send messages to a specific domain? And users can send other external domain messages well? Also check whether you can receive external messages or not.
    Please check whether this destination domain is listed in the accepted domain of your Exchange server(EMC > Organization Configuration > Hub Transport > Accepted Domains). If it is, please remove it from the list. Additionally, since the issue happens
    to all domain users, I suggest we can collect any logs in your Exchange server to ask a question in Microsoft Exchange Server forum for more professional suggestions:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=exchange2010
    Regards,
    Winnie Liang
    TechNet Community Support

  • My genius results cannot be delivered. Unknown error 13010.

    My genius results cannot be delivered. Unknown error 13010. Therefore itunes match doesn't work neither. I already tried deleting the genius itdb file. Didnt work. My music is on an external drive.
    Can anyone help?

    Hello nebimotu,
    This error indicates an interruption in communication between the iPad and the computer, specifically the USB connection.
    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    iTunes: Troubleshooting security software issues
    http://support.apple.com/kb/TS3125
    Cheers,
    Allen

  • Order cannot be delivered (see long text)

    I am creating a delivery wrt sales order through VL01N.
    but I am facing the below error:-
    Order cannot be delivered (see long text)
    Message no. VL461
    And in the Display log,its  is showing as :-
    Order is incomplete - maintain the order
    Can anybody suggest me,where the problem,bcoz I am a mm guy and not aware very well releated to SD.

    In VA02 for reqd. sales order,in menu edit --> incompletion log or
    press ctrl + f8 to find out incomplete entries,enter datas & save it.

  • I bought my macpro in NY but now I live in France. I want to order an album via IPHOTO and it cannot be delivered other than in US??? please I need help

    I bought my macpro in NY but now I live in France. I want to order an album via IPHOTO and it cannot be delivered other than in US??? please I need help

    I assume you mean 'Order an album via iTunes', not iPhoto.
    If you live in France, I believe your account with Apple will need to show a French residential address and be supported by a credit card issued by a bank in France.
    That means you will need to open a new account if these details are not part of your current account.
    Incidentally, some albums in iTunes USA are not available in all countries due to licensing agreements etc.

  • Receiving msgs that mail I HAVE NOT GENERATED cannot be delivered.  About 15 each day.  Is this a virus?

    Hi, I have received about 15 email messages a day from " Mail Administrator - Mail System Error Returned Mail" that emails I have not generated, cannot be delivered as the destination computer cannot be found!  These emails are in a foreign language, appears to be russian, and I have no clue who/what generates them.  It was suggested to me that it could be a virus.  I have done three scans and so far nothing malicious has been found.  Does anyone know how I can fix/stop these?
    Thank you
    Chrysi

    If this is someone else's windows machine, infected, and with your contact information in their contacts, then there is little if anything you can do.  Windows machines can often become infected by mail bots that randomly send mail from the infected computer to people in the contact's database, AND using email addresses found in those contacts to spoof the "from" field in the outgoing mail.  When those messages fail, the receiving server bounces them back to you as your email was in the "from" address field.
    The only solution would be to disinfect the infected computer, but since you have no idea who (amongst all those with your contact information) is the actual infected computer, you cannot really do anything.

  • In App Purchase Error, ( Transaction Failed Cannot connect to iTunes Store)

    O.k. on my iPhone when I'm in an app I tried to purchase something and it won't let me by saying, Transaction Failed, Cannot Connect to iTunes Store.. But I'm able to use the same app on my iPod touch and I can purchase what I needed.... So can somebody help me figure out what the reason is behind it? Both the iPhone and the Ipod has the same account information and both uses the same computer to connect to iTunes.... So why does one work and the other doesn't? Also its an iPhone 3Gs...

    Although you may be using the same iTunes Account, things can get a little strange if you have different AppleID's for each device. On your device, check settings ==> Store. The AppleID for that device is listed there. It can be confusing because syncing to the same iTunes account is not the same as managing App and purchases through the iTunes Store Account.
    On your iTunes window the uppe right corner shows which AppleStore ID is logged in. If it turns out they are different, simply log out of the store on iTunes, and log in with the other account. Download the updates. Log out and then back in to the other account.
    As an alternative, download the updates on the device they were purchased. Sync to iTunes, and the updated download be transferred back to iTunes and available to the other devices syncing with iTunes.
    Or....... if your iPhone is Airplane Mode, turn that Airplane mode off and ignore everything from above.

  • Mail cannot be delivered - stays in out tray

    I have just been reviewing and testing assembled wisdom on this problem for which there are multiple posts. The two solutions suggested do not work for me (1) My ISP says that SMTP server settings are correctly configured for my account, port 25, no authentication etc (2) I have tried deleting the affected messages and the mail outbox file in Home/library/mail. Neither of these solutions work for me.

    OK. You’ve said what the right settings are supposed
    to be and what have you tried that didn’t work, but
    it isn’t clear at all what the problem actually is...
    The problem is as described in the heading of my first post. Pop up appears with text along the lines of "Mail cannot be delivered and will stay in out tray until it's possible to deliver it." I can't send any mail. Mail never leaves the out tray. This is a recent development. Everything was working fine before.

  • Transaction failed: Cannot send mail due to possible abuse

    For the past two days, I have not been able to send mail from one of my Verizon.net sub-accounts using Mozilla Thunderbird. However I can send mail from the Verizon Yahoo webmail website.
    I get this error message:
    An error occurred while sending mail. Transaction failed: Cannot send mail due to possible abuse; please visit http://postmaster.yahoo.com/abuse_smtp.html for more information.
    And when I click on "OK" in the message box, this second error message pops up:
    Sending of message failed. The message could not be sent because the connection to SMTP server outgoing.yahoo.verizon.net was lost in the middle of the transaction. Try again or contact your network administrator.
    When I go to http://postmaster.yahoo.com/abuse_smtp.html, there is just a generic Yahoo help page, with nothing specific about this problem.

    The possible abuse is likely a 24 hour hold for accounts suspected of sending Spam. Are you still having issues? Also what ports do you have the incoming/outgoing server set to?
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • My messages cannot be delivered

    ERROR ..... This message could not be delivered and will remain in your Outbox until it can be delivered.
    The SMTP server "smtp.my server.net" doesn't support authentication. Please check your account setting and try again.......
    I have been fighting this for over a week. I have even trashed my mail application and started new. I have called my ISP 3 times.... they confirm it is something with my software, not the carrier of my mail. I have been using Mail for 4 years from Apple.
    I had some other probelms last month, couldn't delete, so I ended up dumping my mail application to get rid of the mailings that kept doubling every time I used the software.
    Somehow now I cannot get my smtp outgoing mail to support authentication. I read in the discussions that it could be a blocking from my ISP, (deep stuff, from spam blocking) I will look into that during business hours. In the mean time..... any suggestions. I must tell you, there isn't to much I haven't tried.
    I have 2 other e-mail addresses, all 3 work on this computer when I use thunderbird, or my ISP mailing service. My husbands e-mail works fine also, he uses thunderbird.

    I have been fighting this mail software since July 9th.... I have removed it and reinstalled, but it just led to another situation.....
    I am not sure if I am authenticating..... I do not have a drop down box indicating it is not, but, I still cannot send mail. It goes directly to the out box.
    I do get a error, that states my SMTP cannot contact on port 25. I have gone through my carrier, we have checked out every thing, and on that end, everything is correct. And I am entered correctly on my side.
    I have done what you suggested back on Oct 1, and I still have problems. I have deleted my password, still no use, then reentered it, to the same conclusion. I am completely baffled.
    Could it be my router? D-Link ~ model DI-524
    My husband uses Thunderbird for mail, and he has no problem.... same carrier. ...... receiving or sending. Could it be blocking Port 25?

  • In ME2L transaction, Still to be delivered Qty showing after Short Closed

    Hi,
    We have a PO with 50 qty pending, which is showing in ME2L transaction. Now we want to short close this PO.
    Through ME22N transaction, we has short closed this PO.
    But till now, in ME2L Still to be delivered qty showing 50. How can we see the Open PO list now...
    Regards..

    Hi Anil,
    How u have short closed PO.
    Select PO Line items and click on Lock symbol for blocking.
    then execute ME2L transaction, so that you can see "To be Del. Qty." as Zero
    Regards,
    VB Rao

Maybe you are looking for