Transaction ABST2 - Asset balance sheet values not completely posted

Hi,
An error message appeared when using transaction ABST2.
"Asset balance sheet values are not completely posted".
What can be the reason?
How can I check what is missing?
Thank you.
Kind regards,
Linda

Linda,
Run a normal asset report on G/L account and compaire this with the values on the G/L account.
When there are differences you can use transaction code ABF1 with trans type 100. With this transaction you can post on the asset account whitout using an asset number.
The results in the transaction ABST2 is difficult to understand. This was a transaction that was used with the Euro conversion. When there are difference it dont block the fiscal year change.
Paul

Similar Messages

  • AJAB Asset balance sheet values not completely posted, Message AU075

    Hi Champs,
    1.
    Herewith I am trying to close the Asset F Year 2007,but system does not allow me to close the same.
    > Diagnosis
    In company code 5500, which is to be closed, APC values have not been posted to Financial Accounting for all relevant depreciation areas.
    Depreciation area 25, at least, is set up for periodic posting of APC values.
    So I am not aware about posting of Depreciation area in GL
    so Pl Define How Depreciation Areas Post to General Ledger ?
    2.
    I am developing Asset register with all required values but could not found a logic "to get Posting date wise depreciation"
    For E.g
    If I run the report from 01.04.08 to 31.05.08, then system gives me depreciation up to 28.02.09 (Posted depreciation) i.e It does not restrict the values up to given date.
    So can you pl provide me Table in which posting date wise Depreciation can be found
    Depreciation (Bifurcation Req for Depre on Retirement & Transfer)
    Expecting Prompt revert
    Thanks & Regards
    Dev Hindocha

    Have a look to this message for the tables
    Asset master data Tables
    There are some ABAP query reports to you can use as an example
    TC ARQ0 - Ad Hoc Reports
    Edited by: Paul Annotee on Apr 22, 2009 8:41 PM

  • 3KEH Balance Sheet Values not updated in Profit Center

    Hello Peofit Center experts
    I have Assigned Profit Center for few balance Sheet Accounts in 3KEH.But values are not updated in respective Profit Centers.
    I have to do any configuration settings for transfer Balance Sheet accounts to Profit center or Assignment 3KEH is enough.
    Please guide me
    Thanks
    Kameshwar Rao

    Issue has been resolved.1
    Issue has been resolved

  • Balance sheet valuation not active (Customizing transaction OMWE)

    Hi,
    For FIFO Valuation, I have done the following SPRO setting:
    1. Activate balance sheet valuation (Trans: OMWE) - as LIFO not relevant, FIFO active.
    2. Defined LIFO/FIFO valuation levels (Trans: OMWL) - set as Plant (valuation area).
    3. Configured FIFO Valuation areas for year 2008.
    4. Define LIFO/FIFO method (Trans: OMWP) - FIFO01 as CUR u2013 current
    5. No changes made to movements relevant to FIFO (Trans: OMW4);
    While running the MRF1, the system is throwing the following message:
    Balance sheet valuation not active (Customizing transaction OMWE)
    Message no. MY043
    Pls. help in rectifying the problem.
    Pls. note that I have already activated the LIFO/FIFO-relevant Check box while creating the Material.
    Do I need to execute MRF4 before executing MRF1?
    Regards,

    hey guys... can anyone help  me to solve this issue....

  • Balance Sheet Value

    Hi,
    The calculated key figure used in the report (Balance Sheet Value) is adding stock value + flow value. I’m not sure what those two fields connect to in R3 but it appears that they do not calculate correctly.
         I attempted to trace those two data elements back into R3 but were unsuccessful. Could you provide some guidance as to what those two key figures are?

    These key figures are read from the R/3 tables GLFUNCT and GLT0 and the hierarchy table 0GLACCEXT by the function module, RS_BCT_FIGL_DATA_GET.
    In the key figure 0VAL_STOCK (asset value), the service displays the asset share of the balance sheet. The key figure 0VAL_FLOW (flow value) contains the values of the P&L statement from the financial statement structure.
    Refer below links for more details:
    http://help.sap.com/saphelp_nw04/helpdata/en/04/7b95fb42b0f94aba334c0890dbbda4/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2f6d9790-0201-0010-dcbc-e099c7c049a2

  • Balance sheet values to PCA

    HI All
    In classic GL how does balance sheet values flow to PCA?

    You have to assign the accounts in PCA. (NOT the reconsilation accounts)
    Run  on the end of the month the reports:
    Balance Sheet Adjustment  (FI)
    F.5D - Calculate
    F.5E - Post
    F.5F - Display Log
    F.5G - Special Functions
    Period-End Closing PCA
    1KEK - Transferring Payables/Receivables
    2KES - Balance Carryforward

  • Trail balance and Balance sheet is not comming business areawise

    Hi ,
    we are not able to get trail balance and balance sheet business area wise because we had posted document without checking the tick in OBY6 and  Scenarios for business area in (FIN_GSBER) ledger have not defined.
    help us resolve this issue.
    regards
    RITA

    Hi
    Initially BA Financial statements cannot be generated unless you have defined clearing accounts and run certain programs for all PL and BS adjustments.
    After defining the clearing accounts, execute the below programs
    SAPF181
    Profit and Loss Adjustment
    SAPF180A
    Calculate Balance Sheet Adjustment
    SAPF180
    Post Balance Sheet Adjustment
    SAPF180P
    Display Balance Sheet Adjustment Log
    SAPF180N
    Set up Balance Sheet Adjustment
    SAPF180S
    Reverse Posting Run for Balance Sheet Adjustment
    SAPF180K
    Redetermine Adjustment Accounts for Balance Sheet Adjustment
    Reg
    Suresh

  • Balance sheet adjustment account getting posted when customer clearing

    Hi All,
    Since lately when clearing CERTAIN customer open items when there is an exchange rate difference, its posting in to the balance sheet adjustment account instead of the gain/loss P&L accounts....  What can be the reason to this? When does the balance sheet adjustment account gets posted other than during the monthe end exchange run?
    Thanks
    Maleeq

    Hi
    Check settings in OBA1
    Thank You,

  • All inventories Value Report and GL Balance Sheet (YTD) not matching

    Hi There,
    We are in 11.5.9 and we are getting mismatch in All inventories Value Report and GL Balance Sheet (YTD).
    Please guide us how to identify where the mismatch is?
    Thanks,
    GR Shankar

    I realise this post is not current, however this is fetched in search results and felt I'd add an additional detail that I just learnt.
    http://docs.oracle.com/cd/E12104_01/books/AnyInstAdm/AnyImp_ConfigFinance6.html
    Oracle BI Applications provides two ways to populate the GL balances (stored in the W_GL_BALANCE_F table), as follows:
    By extracting the GL balances directly from Oracle General Ledger, as follows:
    In DAC, for the Subject Area 'Financials - General Ledger', in the 'Configuration Tag' tab, make sure that the tag 'Oracle - Extract GL Balance' is unchecked for the 'Inactive' checkbox.
    Make sure the tag 'Financials - Calculate GL Balance is checked in the 'Inactive' checkbox.
    Click Assemble to redesign the subject area.
    After the subject area has been redesigned, redesign the execution plans that contain this subject area.
    By calculating the GL balances based on the records in the W_GL_OTHER_F table, which stores all journal lines, as follows:
    In DAC, for the Subject Area 'Financials - General Ledger', in the 'Configuration Tag' tab, make sure that the tag 'Financials - Calculate GL Balance' is unchecked for the 'Inactive' checkbox.
    Make sure the tag 'Oracle - Extract GL Balance' is checked in the 'Inactive' checkbox.
    Click Assemble to redesign the subject area.
    After the subject area has been redesigned, redesign the execution plans that contain this subject area.

  • Balance sheet accounts not updating in GLPCA / GLPCT

    Hello,
    I am working on MySAP 6.0 version and posting FI document giving profit center as an account assignment.
    When I check the table entries in GLPCA and GLPCT I could see only P&L accounts updated in these tables but not the balance sheet accounts viz Bank Account.
    To be more elaborate if my entry is as under
    Dr Expense Account (PCA1) GLPCA / GLPCT  (It is updated)
    Cr Bank Account (PCA2) GLPCA / GLPCT (ignoring this line item)
    However if I post a similar entry directly into PCA module these tables do get updated with balance sheet accounts.
    Would anybody have any reasoning for this?

    HI
    Originally till 4.7 SAP had only month end transaction to push many of balance sheet items to PCA only from the new versions it is having this online transfer usinf assignment of PCA to Gl accounts and then deriving PCA through splitting rules. Thats is why P7L items automatically flow however for balance sheet items especially creditors and debtors, bank and others it requires proper derivation.
    Even in Balance sheet Asset will flow automatically
    Anand

  • Special Leder and FI balance sheet do not reconcile

    Hi,
    I have issues with reconciling special ledger and FI balance sheet accounts. The month-end process GWUL (currency translation for SPL) was executed and business users did not execute F.05 for FI, probably this was missed out more than one month.
    There balance sheet accounts in these ledgers do not reconcile. e.g. there are no FI posting for Bank account 1100011, but due to special ledger conversion GWUL there are postings in special ledgers.
    How do i fix the issue?
    Thanks

    HI
    Originally till 4.7 SAP had only month end transaction to push many of balance sheet items to PCA only from the new versions it is having this online transfer usinf assignment of PCA to Gl accounts and then deriving PCA through splitting rules. Thats is why P7L items automatically flow however for balance sheet items especially creditors and debtors, bank and others it requires proper derivation.
    Even in Balance sheet Asset will flow automatically
    Anand

  • Monthly Balance Sheet is not balanced

    Hi Everyone,
    I just found out that when I print my balance sheet by monthly, in some month, the figure of my "assets" is not equal to my "liabilities + equity". But when I print in annually, the both are tally.
    What could be the cause?
    Thanks in advance,
    Best Regards,
    Kevin

    Hi
    Sorry by due to missintereption wrongly posted
    Giri
    Edited by: Giri dharan on Aug 27, 2009 12:08 PM
    Edited by: Giri dharan on Aug 27, 2009 12:48 PM

  • Balance sheet values to COPA/PCA

    Hello all
    We need to allocate and take few Balance Sheet account values as well to COPA OR PCA for finer reporting, any pointers on this shall be very helpful?
    Thanks
    Balla

    Hi Balla,
    Can we understand the business requirement a bit more clearly. I'll put down the background as per my understanding.
    1. PCA - the requirement is to have the balance sheet at profit center wise - If you are using ECC6.0 all you need to do is set up document splitting functionality. Once this is done, all the documents (P/L and B/S) will have the profit center mandatorily and the balance sheet is possible at PC level. Of course you can imaging that with this PCA has become redundant.
    2. COPA - I do not understand why a balance sheet item will come to balance sheet should come to any profitablity analysis ever? As I'm analysing the profitability at any level i will not require the balance sheet item in any case unless you are trying to achieve something else with COPA. Do you want to recheck the requirement or can you please explain the exact business requirement?
    Best Regards
    Vimal

  • New GL-Balance Sheet Values

    Hello
    We have new GL with Profit center as splitting criteria.Do we have any tables which store the carried forward values (Annual for balance sheet accounts.

    Hi,
    You have to Run the T-code FAGLGVTR so that the value get carry forward to next year
    Regards
    Shayam

  • G/l balance sheet is not balance in STO

    Dear All,
    in t-code fs10n my g/l acc is not balance in STO (Internal plant with same company code) the balance is occure my procedure is
    1-creating stock transport order
    2-creating delivery & post goods issue
    3-creating billing document
    4-creating excise invoice . here two document is created one
    AED ,BED ,ECESS is credited & cenvat suspense is debited & 2nd
    cenvat suspense is credited ,.stock transfer is credited & customer is debited
    5-goods received wrt excise invoice . here one acc document is created
    AED ,BED ,ECESS is debited & cenvat clearing is credited
    Actually in billing cenvat suspense is debit &credit but in migo cenvat clearing is credited so it shows in my g/l balance sheet in sto im not doing miri to balance cenvat clearing debited so how can i balance my g/l balance
    Can we capture excise invoice in migo .
    how can we balance those sto have done
    pls give ur valuable suggection.
    Regards
    Amin

    Hi,
    I guess this account is a reconciliatons account, and so, you have clear you customer before to equal balances.
    rgds

Maybe you are looking for