Transaction CO11n

in the co11n. confirmation goods movement screen. the material description against each material  component is coming at the end of the line.every time i have to drag it next to the material  number . is there any way to default it so that it always comes after the material number in the CO11n goods movement screen.

Deepu,
Thisn is very much possible.
Follow the link given where I have explained the solution for the same.
Re: how to shift column in Goods movement overview
Hope this helps you.
SmanS
Edited by: SAP PP Consultant on Jun 9, 2009 9:53 AM

Similar Messages

  • Table AFRU, Transaction CO11N, confirmation not released?

    Hi Gurus,
    this question is regarding confirmation numbers (AFRU or other tables) and transaction CO11N.
    can you help me in with problem (Test condition)?
    Send notifications of not released orders.
    my question is how? what table? field? transaction? anything. can someone explain me this? i made an FM that simulates CO11N and it is one of the test conditions.
    Thanks

    Hi,
    Your question is not understood. Can you please explain a bit more. If you question is purely Functional, Please post the same in Functional Forum.

  • Modification quantity default in the transaction CO11N

    Dear gurus,
    i need to modification the quantity propose in the transaction CO11N.
    For example in the production order 1 for the operation 10 the operation quantity is 100 pzp.
    When we run CO11N we would like see the propose quantity 200 pzp.
    There is the exit for modifcation the operation quantity propose?
    Thanks a lot
    Daniele Pistilli
    PP TEAM

    Dear ,
    CO11N will propose the Yeild Qty based on the Production  qty  at header level either it is original values or changed values based on your requirement .Now if you are changing the opreaiton qty that may be at operation level and compoenet level changes for same Order Qty or more  .Accordingly , CO11N will be populated  .
    However , You can utilise the below user exit  for your requirement :
    1.PPCO0019 Checks for changes to order operations
    2.CONFPI05
    3.CONFPP01
    4.CONFPM01
    Beside that , you can make Qty Propose an editable field as you want to see the Operation Qty as 200 which  is more than the orginal one .To set this goto CO86-Select Production Order Confirm Detail Screen -Choose Yelied To Confirm -AFRUD-LMNGA  as input field -mark the radio button .
    Regards
    JH

  • Transaction CO11N- difference between confirmation dates

    Hello,
    I have a problem with the transaction CO11N when I do the confirm of the production order. I have a difference by 1 hour, between Confirmation entry date and Confirmed date for execution finish.
    Thanks in advance.
    Best Regards
    Vincenzo

    Hi,
    In simeple terminology co11n is opration wise conformation where as co15 is batch level conformaiton.
    hope you better understand.
    Thanks and regards
    E.Rambabu

  • Restriction of posting date in transaction CO11N for partial confirmations

    Hi all,
          I am trying to restrict(by checking thru an exit)  the posting date in co11n , for this i m using enhancement CONFPP04.
         Import parameter AFRUD_IMP IS USED.
         Now when i m putting  production order no , operation activity no.(for e.g 10 , 20 etc ) and posting date IN SEL SCREEN OF CO11N
        AFRUD_IMP-BUDAT( POSTING DATE )  CONTAINS VALUE  in debugging mode , hence i m getting the value of posting date
        and in that case check is written in code.  This is the case of full confirmation.
                                     But in case of partial confirmation  i have to give   production order no , operation activity no , *Partial confirmed qty * and posting date , in this case the posting date value changes to 0 in the debug mode ie.
      AFRUD_IMP-BUDAT is showing 0 and hence no calculation can be done base on the date.
          Our requirement is such that if there is a prd order no say X,
    then in CO11N if user enters prd no X  , operation activity no 10 , post date say D1
    then again for  prd no X  , operation activity no 20 , post date  of activity 20 should not be less than D1
    SIMAILARY for  X,  ACTIVITY 30 ,  post date should not less than that of  activity  20. and so on.
        But if partial quantity is mentioned value of  AFRUD_IMP-BUDAT is becoming null.
          If anyone knows about this scenario please share.
      Thanks and regards
    Pankaj Gupta

    Hi, In the T-code Mb31 
    The Posting Date which is used  is when entering the document in Financial Accounting or Controlling. The fiscal year and the period for which an update of the accounts specified in the document or cost elements is made, are derived from this posting date.
    When entering documents, the system checks whether the posting date entered is allowed by means of the posting period permitted.But this posting date can differ from both the entry date (day of entry into the system) and the document date (day of creation of the original document).This is for the practical purpose .
    So its for the Monthly permitted and not for a day or range .
    Secondly when you are saying :
    "We want this <b>default date to get freeze</b> the moment you enter
    the transaction (MB31). If you are opting for second option we want
    <u><i><b>some flexibility to change the date as required</b></i></u>."
    Both freezing and opting for changes is not possible , either one can occur .
    You can freeze/display mode only  the field for the T-code and the document type, but that will not solve your problem .
    What i understand from the description is you want to Do GR on A particular date or GR should be allowed after a particular date . <u><b>Please let me know</b></u> if this is the case then there's a way around to do this that is you can do GR and Post on the dates near to your desirable dates .
    cheers KP

  • User Exit for Transaction CO11N Transaction

    Hello Friends,
                             I have a requirment , In the Transaction C011N , When I specify the Order Number, When I am confirming the Production Order , I want to compare the Item Level Material with some manipulated data .... But I am not getting the Item Level Information , Can any one tell me which User Exit should I use ......
    Thanks & Regard
      Nagaraj S

    CHeck these...
    CONF0001            Enhancements in order confirmation
    CONFPI02            Process order confirmation: Customer spec. input checks 1
    CONFPI06            Process order confirmation: Actual data transfer
    CONFPM02            PM/SM order confirmation: Customer specific input checks 1
    CONFPP06            PP Order Confirmations: Actual Data Transfer
    CONFPS01            PS confirmation: Determine customer specific default values
    CONFPS02            PS confirmation: Customer specific input checks 1
    CONFPS03            PS confirmation: Customer specific check after op. selectio
    CONFPS04            PS confirmation: Customer specific input checks 2
    CONFPS05            PS confirmation: Customer specific enhancements when saving

  • CO11N User exit control

    Hi,
    I don't capture user-exits when press Goods Movements (sy-ucomm = MB03) and Save buttons in transaction CO11N.
    I use the following user-exit:
    FUNCTION EXIT_SAPLCORF_102 >>> Include          ZXCOFU12
    Can you help me please.
    Screen Image: http://i53.tinypic.com/2ef2rtv.jpg
    Best Regards.

    Im not creating blank message
    i use the a term but the problem is, when i first hit save button and see the error message,than  i hit enter button to pass the message and make the input fields editable again. But sy-ucomm is still equal to BU so it show the message again and again and i cant return to normal input screen. And if i make the message type 'S' i cant block the saving process.
    I have to option first i will use type E message but i have to get over the problem above, or i will use type 'S' message but i have to stop the transaction after this message. I used type E like S or type S like E. They didnt work.

  • Check on quantity field of co11n

    hi all,
        I want to display error messages when the quantity field at goods movement level of transaction co11n is 0 or space.
    Find me the user exit or badi , but field exit is becoming complex as the screen is a table control.
    help me.

    hi madhav,
    CONFPP01                                PP order conf.: Determine customer specific default values
    CONFPP02                                PP order conf.: Customer specific input checks 1
    CONFPP03                                PP order conf.: Cust. specific check after op. selection
    CONFPP04                                PP order conf.: Customer specific input checks 2
    CONFPP05                                PP order conf.: Customer specific enhancements when saving
    CONFPP06                                PP Order Confirmations: Actual Data Transfer
    CONFPP07                                Single Screen Entry: Inclusion of User-Defined Subscreens
    CONFPS01                                PS confirmation: Determine customer specific default values
    CONFPS02                                PS confirmation: Customer specific input checks 1
    CONFPS03                                PS confirmation: Customer specific check after op. selection
    CONFPS04                                PS confirmation: Customer specific input checks 2
    CONFPS05                                PS confirmation: Customer specific enhancements when saving
    CONF0001                                Enhancements in order confirmation
    CONFPI01                                Process order conf.: Calculate cust.specific default values
    CONFPI02                                Process order confirmation: Customer spec. input checks 1
    CONFPI03                                Process order conf.: Cust. spec. check after op. selection
    CONFPI04                                Process order conf.: Customer specific input checks 2
    CONFPI05                                Process order conf.: Cust. spec. enhancements when saving
    CONFPI06                                Process order confirmation: Actual data transfer
    CONFPM01                                PM/SM order conf.: Determine cust. specific default values
    CONFPM02                                PM/SM order confirmation: Customer specific input checks 1
    CONFPM03                                PM/SM order conf.: Cust. spec. check after op. selection
    CONFPM04                                PM/SM order conf.: Customer specific input check 2
    CONFPM05                                PM/SM order conf.: Cust. specific enhancements when saving
    these are the list of userexits for the transaction co11n try keeping the break point in each user exit and check which suits your requirement.
    the second method is you can do it by reading the documentation of the each exit.
    Hope its clear to you,
    Reward points fi usefull,
    Thanks,
    kalyan.

  • Simultaneous notifications of the same order with the CO11N

    Hello PP Team
    I have a problem
    Notifying with the transaction CO11N, exists the possibility that from several working places is notifying at the same time the same production order.
    What happens with SAP's standard is that it they appears a mistake: " The order the XXXXXXXXX is being treated by the user the XXXXXX "
    There exists some way of being able to use in the CO11N the same production order from different users and different PCs?
    Thanks in advance
    Regards

    Thanks 4 your answer, but it isn't OK for me.
    For example...
    We have a production order n."12345678"
    It is a long chain of production, in which some pieces, for example, finish of a so called work center "X".
    These pieces enter a work center "Y". In this work center, the process is low in time that in the work center X, for what while the operation 10 is confirming, in another working place "Y", the operation 20 is confirming too.
    There are 2 different computers, with tcode CO11N opened, and the problem is what i said before... using the same production order, in work center "Y" appears the error message: "The order 12345678 is being treated by USER123"
    I know that It is SAP's standard rule... but how can i change it?
    Any idea?
    Thanks in advance!
    Regards

  • Trsct CO11N, how to confirm a prod. order withoout confirming activities?

    Hello
    We are using transaction CO11N to confirm production orders
    Our production orders have several operations.
    The last one creates the goods movement (control key PP03).
    In the others operations we have several activities each one with a standard time taken from the routing.
    Since we are not immediately informed about the time spent by the workers to do each activity, we would like to post the good receipt as first and only after we would like to confirm each operation with the right minutes for each activity.
    But when we post the goods movement in the last operation, the system confirms  automatically all the activities in all the operations using the standard values even if in transaction Co11n the fields activity's values are empty.
    How can we post the goods movement without confirming activities so that we can confirm later the activities with the right values? I think I have to change some settings somewhere but I cannot understand where.
    thanks
    Regards
    Giacomo

    Hi,
    you could always turn off auto gr feature so confirmation with co11n is seperated with mb31 gr production.
    But if you still want to use as is config you can just left the activity blank and you branch to good movement to do auto gr and you can save it.
    For your additional info : ypu can set whether the activity qty is proposed manually or not by setting confirmation paramater or single screen entry confirmation parameter.
    I hope it helps
    Best regards,
    Freddy Ha

  • Screen exit for co11n and problems in writting the PBO and PAI Logic ?

    Hi People,
    I am developing a screen exit for transaction co11n. I have found the exit ( CONFPP07 ) ... I created a project and have
    assigned this exit and activated the project. I have created a field named SHIFT  on clicking this field i have to give three
    possible values (a,b,c  ) and i have to store these values in some table .......... now my problem is in which include i
    have to write PBO and PAI logic ... should i have to write pbo logic in the include provided in the exit
    EXIT_SAPLCORU_S_100 and PAI in EXIT_SAPLCORU_S_101.......or .........Can any tel me what should i have to do to
    meet the requirements... and in which structure i have to add this field so that it gets stored in some table.
    Thanks in Advance.

    Hi,
    Use the includes in the program SAPLXCOF given in CONFPP07 Exit.
    You may use include zxcofzzz ( for Subprograms and Modules )
    by creating it upon double click.
    Regards,
    Wajid Hussain P.

  • Exit in tr co11n

    Hi Friends,
         I want to write a exit for transaction co11n. My functional consultant has given me the exit name. But my main doubt is in which transaction i have to write the code ie whether in tr SMOD or CMOD. Can any one suggest me.
    And also ple explain me why we use SMOD and CMOD transactions and how to findout the exit.
    Thanks in Advance,
    regards,
    desha.

    Hi Desha,
    These are the avialble enhancements for CO11N Transaction.
    CONFPP01                                PP order conf.: Determine customer specific default values 
    CONFPP02                                PP order conf.: Customer specific input checks 1           
    CONFPP03                                PP order conf.: Cust. specific check after op. selection   
    CONFPP04                                PP order conf.: Customer specific input checks 2           
    CONFPP05                                PP order conf.: Customer specific enhancements when saving 
    CONFPP06                                PP Order Confirmations: Actual Data Transfer               
    CONFPP07                                Single Screen Entry: Inclusion of User-Defined Subscreens  
    CONFPS01                                PS confirmation: Determine customer specific default values
    CONFPS02                                PS confirmation: Customer specific input checks 1          
    CONFPS03                                PS confirmation: Customer specific check after op. selection
    CONFPS04                                PS confirmation: Customer specific input checks 2          
    CONFPS05                                PS confirmation: Customer specific enhancements when saving
    CONF0001                                Enhancements in order confirmation                         
    CONFPI01                                Process order conf.: Calculate cust.specific default values
    CONFPI02                                Process order confirmation: Customer spec. input checks 1  
    CONFPI03                                Process order conf.: Cust. spec. check after op. selection 
    CONFPI04                                Process order conf.: Customer specific input checks 2      
    CONFPI05                                Process order conf.: Cust. spec. enhancements when saving  
    CONFPI06                                Process order confirmation: Actual data transfer           
    CONFPM01                                PM/SM order conf.: Determine cust. specific default values 
    CONFPM02                                PM/SM order confirmation: Customer specific input checks 1 
    CONFPM03                                PM/SM order conf.: Cust. spec. check after op. selection   
    CONFPM04                                PM/SM order conf.: Customer specific input check 2         
    CONFPM05                                PM/SM order conf.: Cust. specific enhancements when saving 
    <b>Reward Points if this helps,</b>
    Satish

  • Recall co11n in user exit

    Hi all...
    I'm currently on working with T-code CO11N (user exit : CONFPP05)
    I'm trying to validate user input..
    when the input isn't accepted, I want to stop transaction anda automatically call transaction CO11N again
    I tried to use CALL TRANSACTION 'CO11N'
    and it's successfully call CO11N again with blank field
    BUT....
    When I'm trying to reprocess from the recalled screen, it says that user from previous screen was still processing it, so Ican't continue...
    How can I deal with this problem?
    If possible, Can I do the following point:
    1. When CO11N is recalled, the field-text that i had filled before, automatically filled

    harishkumar.d
    I'd tried it.thanks...
    can I automatically fill text-field when I recall CO11N ???

  • CO11N can not post the backflush material properly

    Dear Gurus,
    When I use CO11N to post a Backflush material, the system returns error logs " No stock posting possible for this material".  Aside the warning and confirm straghtly, then I use COGI to post this error backflush material, It post successfully without any warnning message.
    (PS: I have checked my material type in OMS2, the parameter was right. And I can use MIGO_561 to post this material.)
    Why the CO11N can not post the backflush material properly, and then can be COGI properly ?
    Thanks in advance for your kindly help.
    BRGs
    Sivan

    Sivan,
    This is due to missing entry in a customisation table T158.
    Call Transaction SM30.Enter view 'V_158_ALL' for field 'Table/view'.Consider the entry for Transaction CO11 as a template and adjust the entry for Transaction CO11N correspondingly so that both entries are identical.Afterwards table T158 must be transported from the Customizing client into the other clients.
    Regards,
    Prasobh

  • User-exit CO11N and CO13 (for GM)

    Hello to all!
    I need a user-exit (or something like this) in transaction CO11N and CO13 where also the goods movements are available. In all the u201Cnormalu201D User-Exits while confirmation (CONFPP01 until CONFPP07) I have only tables like AFKO, AFPO, AFVC, AFRU u2026 in access but I need the GOODSMOVEMENTS for a further processing step for the movement with movement type 101.
    Thanks in advance,
    Regards

    Did you ever tried searching in SAP enhancements for your req
    try these.... Find yourself
    CONF0001  Enhancements in order confirmation                         
    CONFPI01  Process order conf.: Calculate cust.specific default values
    CONFPI02  Process order confirmation: Customer spec. input checks 1  
    CONFPI03  Process order conf.: Cust. spec. check after op. selection 
    CONFPI04  Process order conf.: Customer specific input checks 2      
    CONFPI05  Process order conf.: Cust. spec. enhancements when saving  
    CONFPI06  Process order confirmation: Actual data transfer           
    CONFPM01  PM/SM order conf.: Determine cust. specific default values 
    CONFPM02  PM/SM order confirmation: Customer specific input checks 1 
    CONFPM03  PM/SM order conf.: Cust. spec. check after op. selection   
    CONFPM04  PM/SM order conf.: Customer specific input check 2         
    CONFPM05  PM/SM order conf.: Cust. specific enhancements when saving 
    CONFPP01  PP order conf.: Determine customer specific default values 
    CONFPP02  PP order conf.: Customer specific input checks 1           
    CONFPP03  PP order conf.: Cust. specific check after op. selection   
    CONFPP04  PP order conf.: Customer specific input checks 2           
    CONFPP05  PP order conf.: Customer specific enhancements when saving 
    CONFPP06  PP Order Confirmations: Actual Data Transfer               
    CONFPP07  Single Screen Entry: Inclusion of User-Defined Subscreens  
    CONFPS01  PS confirmation: Determine customer specific default values
    CONFPS02  PS confirmation: Customer specific input checks 1          
    CONFPS03  PS confirmation: Customer specific check after op. selection
    CONFPS04  PS confirmation: Customer specific input checks 2          
    CONFPS05  PS confirmation: Customer specific enhancements when saving

Maybe you are looking for

  • A Bug in mx:TabNavigator ? See small example here

    Hi all, Maybe it's a bug in the TabNavigator component... should I fill a new bug in the system or is that behaviour well known? Just compile the code attach to this message. It's a simple application with a mx:TabNavigator and some buttons. When you

  • Recover database with datafile and logfile

    Hi Export, we have one maxdb database. For some reasons, we have no backup and lost the programs binaries. Is it possble to recover the database with datafile and logfile? and how? thanks a lot. Rongfeng

  • Wireless Security - DOES NOT WORK?

    My problem: AEBS works fine UNLESS I use any Wireless Security. If I set security to WEP, WPA/WPA2 Personal, or WPA2 Personal then the following occurs: -- the AEBS DOES NOT appear as a base station in AirPort Utility -- the Wireless Network DOES app

  • Why doesn't the iphone have flash player?

    why doesn't the iphone have flash player?

  • Where can I find a default rc.lua for awesome 3.4?

    I have upgraded to 3.4 but my config file ain't working .. so (like I don't have any important configs) I'd like to find a default config file for this new version. I already downloaded awesome-3.4.tar.bz2 from awesome official site but there's no rc