Transaction Code Comparion in Different Versions

Hi Folks,
I have an requirement to compare transaction codes of different version and download it if there is any change.
For example: lets say there is a transaction code XYZ in sap R/3 4.7 version the same XYZ transaction exists in SAP ECC also.
But there are some changes in the tranction in the SAP ECC version. The changes are like they have added a new screen to it.
I need to how to find out the changes if there is any.
Thanks & Regards
<LOCKED BY MODERATOR - DUPLICATED THREAD>
Edited by: Alvaro Tejada Galindo on Dec 14, 2009 4:07 PM

Hi,
you can use comparing function in version management. it will tell you every change.
good luck.
Peter

Similar Messages

Selection Screen from prog exec and transaction code is coming different

Dear all,
The selection screen is coming diffrent from the execution of the transaction S_ALR_87013558 and execution from the program name.
The program name I found from SYSTEM->STATUS. But when I have checked in TSTC table for the program name for this transaction, it is showing blank in table.
How can I make the selection screen same from both the executions ?
Please help....
Thanks & Regards
Nrusingha Dash.

Hi Nrusingha,
Check with T.Code SE93.
The transaction S_ALR_87013558 is calling another transaction START_REPORT.
Just check with SE93 by giving the T.Code START_REPORT as input.
see whether your program and this T.Code supported program is same or not.
Regards,
SB.

BODS code migration between different versions

Hi,
I had a code as .ATL in 12.2.2 version .I want to use this code in BODS 4.1.
Is this code is compatible with 4.1 ?
can anyone please explain clearly how can i achieve this situation?

Hi,
With respect ATL
90% compatible and again depends on which transform you are using for example Query and Validation transform 10% information you need to recheck it but not major changes.
You need to consider management console and other dependency etc..
Regards,
Manoj.

What is sfp transaction code

what is sfp transaction code . and in which version this code is available.
pls tell me how i can work on this tcode.

SFP - ADOBE FORM
Component documentation PDF-Based Print Forms Locate the document in its SAP Library structure
Purpose
PDF-based print forms are part of the SAP Interactive Forms by Adobe solution and are used for printing in SAP systems. As well as standard output on printers, and the option of archiving documents, you can also use your application to send a PDF to the Structure linkBusiness Communication Services (BCS). Here, you have the option of faxing or e-mailing your documents.
The following gives you an overview of how a PDF-based print form is structured, and also tells you how to create a PDF-based print form in the development environment of the ABAP Workbench. The integrated Adobe LiveCycle Designeru2122 software supports you when you do this. This software must be installed on your front end before you can create a layout. To see a print preview of your form, you first need to install Adobe Reader or a complete version of Adobe Acrobat.
This documentation does not discuss how documents are printed and controlled on printers. Instead, it discusses the whole process up to when a file is sent to output management functions, such as the spool system in SAP systems. Note that, for printing and previewing PDF-based forms, you need to use a PCL, Postscript, or ZPL printer and an appropriate device type (such as POST2, HPLJ4, HP9500, PDF1, AZPL203, or AZPL300). You cannot use a printer with the device type SAPWIN/SWIN. More information is available in the Structure linkSAP Printing Guide (BC-CCM-PRN), under Structure linkPrinting PDF-Based Forms.
Integration
An activated PDF-based print form corresponds to a callable function module in the SAP system. The complete logic of the form is represented by this function module. When a form is printed, it is called by an application program, which collects the relevant application data. The application program uses the function module interface to send the data. Therefore, the data collection process is split from the logic of the form. This means that you only need to adjust the form when you modify the logic or layout.
There are several ways of creating interactive forms. For more information, see Interactive Forms.
Features
To develop a PDF-based print form, you use Form Builder, integrated with ABAP Workbench. This tool enables you to create a complete form description, even if you do not have extensive programming skills. The tool supports you in the following tasks:
●      Creating layouts
Here, you use the Adobe LiveCycle Designer to design pages or create the layout.
●      Specifying the data used in the form
In the form context, you specify which data, tables, texts, and graphics are sent to the form.
●      Structure linkMigration of Smart Forms
By migrating Smart Forms, you can reuse them as PDF-based print forms. You can find the Smart Form migration tool in transaction SMARTFORMS.
Note
Smart Forms are still supported; you can continue to forms created in Smart Forms without making any changes.
●      Importing existing PDF files or forms
This tool is integrated into Adobe LiveCycle Designer and enables you to use your own templates for your form.
●      Scripting
Adobe LiveCycle Designer uses the script languages JavaScript and FormCalc. FormCalc is a simple Adobe script language for typical form calculations, including mathematical and logical functions, and date and character string functions. For more information about FormCalc, and a FormCalc language reference, see the online help of Adobe LiveCycle Designer.
Note
To achieve the best possible performance when processing forms, use as little scripting as possible in the form itself. If possible, perform all calculations and data analysis in the application program, before the form is called.
●      Printing and archiving the PDF-based print form:
You can use output parameters to specify print and archive settings, and so adapt the output to your requirements. These parameters are not viewed in Form Builder. Instead, you control them with function modules that you integrate in your application program.
Restrictions
Note that local print versions may differ from print versions produced using spool requests in the SAP system. You can print out parts of PDF forms (such as selected pages) as local print versions only, using Adobe Acrobat or Adobe Reader. Information about further restrictions is available in SAP Note 1009567.

What are the different transaction codes for PGI?

1. What are the different transaction codes for PGI?
2. What transaction code should I use for a Group Delivery?
Regards,
Nazim.

Hi
Go to VL02 and you can do the PGI.
Regfarding Group Delivery, you can create a batch job and link the program to the batch job so that the job picks up all the orders and create deliveries.
Creating a Background Job Using the Job Wizard
From the main menu select System>Services>Jobs>Define Job (transaction SM36).
Press the Job Wizard button and step through the screens as follows:
1:Continue
2: Enter a name for your job. Continue.
3: Continue with ABAP Program Step selected
4: Enter the ABAP Program Name and variant name.
Press the Print Parameters button, specify the required printer and set the "Time of Print" to "Send to Print Spooler for now".
Press green tick
Continue
5: If more reports need to be added to the job tick the checkbox, press continue and repeat screens 3 and 4.
6: Select how the job is to scheduled (eg Date and Time)
7: Enter the required scheduling information ( eg Date and Time) and if required tick "Periodic Jobs"
8: If "Periodic Job" was selected select the frequency (eg Monthly)
9: Check the job details and press Complete
Hope the above info helps.
Reward if useful
Regards

I want to make invisible mode ffield (Version) in the transaction code MD61

I want to make invisible mode ffield (Version) in the transaction code MD61.
Can anybody tell me how to do it with coding.
Thanks

Refer the thread for details about coding-
BAPI_REQUIREMENTS_CREATE
Reards,
Amit

Different transaction codes useful for Performance Monitoring

Hi Experts,
Please can you guide me on this question, as to what are the different transaction codes useful for Performance Monitoring i.e. workload statistics and database statistics? What kind of statistics do each of these codes provide?
Many thanks,
Mithun

Hi Mithun
In performance issuses you need to look in terms of many ways that is..
Workload analsys
ST03N: Statistics Regards Locallly
ST03G: Statistics Regards Golbally
STAD: Individual Statistics Regards
STATTRAACE: Individual Statistics Regards Trace
ST07 : User Distribution
Buffers and Memory
ST02 : Buffers and Memory and swaps monitoring
ST10: Table Acess
OS Monitoring
OS04: Locally monitoring
OS07: Remotely monitoring
OS01: LAN check
DataBase Side
ST04: Performance overview
DB01: Exclusive locks
DB02: Tables/Indexes
BackgroundJobs monitor
SM37
other tcodes
ST22: Abap Dumps
SM12: Lock Entries
SM56: NumberRange Buffers
SU56: User Buffer
all above transactions are need to monitor for Performance.
Regards
Bandla

Transaction code for creation of CO version

Hi All,
Can anyone please let me know whats the t-code for creating co versions for a project.
SAM

Hi Sampath,
CN72 is to create project version.
you can create more no of project versions for every project. But CO Version is created one time only as per the business requirement to plan cost/revenue/overheads etc....Based on the available CO Version you can use to plan for all your projects.
If you want to copy planned cost from one CO version to another CO Version, use CJ9BS,CJ9CS,CJ9FS.
Hope this clears you. Please go through the below mentioned link for better understanding of CO Version.
http://help.sap.com/saphelp_47x200/helpdata/en/d8/1fe8344d1d166be10000009b38f83b/frameset.htm
regards,
Hari
Edited by: Hari Krishna Kudaravalli on Jun 12, 2009 8:04 PM

Creation of Transaction code for Reports created in FGI1.

Hi all,
   We are in ECC 6.0 version. We have created one report for Profit Center Group Wise Receivables with transaction code FGI1. When we executed the report from FGI5 , it was showing the values correctly.
   We created the t.code for the report painter programe and tried to execute. The screen is different from that of T.Code: FGI4. When we executed , it was not showing any values. I created authorisation for the report and also for the transaction codes.
   Appreciate your suggestion at the earliest.
Thanks
Dasa

Hi
Check TSTCP table for the existing t-codes and for creating check this link
Re: Transaction Code Creation for a Table/View
Regards
Pavan

Transaction code history table

Hi Guys,
       I need to know the program names which were assigned to a particular transaction code. I know this history is stored in a table. I forgot the table name.
       Now I am in urgency to find what are all the previous programs assigned to that transaction code.
Thanks in advance,
K. R. Chakradhar

Hi Seshu,
       Thanks for your reply.
       But here I don't know the program name.
       I know the tcode name. we assigned different versions of the programs to a single tcode.
     ex: prg1 is assigned to tcode1. then the program has been modified and named as prg2 and assignd to same tcode1. afterthat again the program has been modified and named as prg3 and assigned to same tcode1..like that it went some 5 to 6 versions...But note that the tcode name is same.
       after some time i found that last version of the program is wrong.. I want to assign the second time program name ie. prg2.
       for that I have to know all the program names which were assigned to that tcode.
      from where I can find that one
plz give me the appropriate answers
thanks in advance
K. R. Chakradhar

Custom Transaction codes overwritten during transports

Hi,
When I create custom queries in my production client, assign transaction codes to them, and assign them to roles they get overwritten every time I perform a transport for those roles. We are still at an early stage of implementation and there are still some daily authorization changes that require a transport from test to production. When the roles are transported it wipes all my reports (transaction codes) assigned to these roles in the production system. Is there a way to perform a transport without wiping out the customizations made to the role in the production system like these?
Thank you,
Sergiy

The answer is in the way one works with BI (or BW).
If the design is that queries are to be created in production (which is often used). As far as i know the only exception on the rule that everything should be build in DEV. And this is the only good way as you do not want end-users to work in DEV. There are some things to know about the way SAP works.
If a role is changed in DEV and transported to PROD all queries assigned to the role in PROD will be disconnected.
Solution a role to be used in PROD were queries will be assigned to should never be transported again.
Solution in detail, there should be roles for different use:
1.     Access to Info providers in version read and write.
2.     Access to publish reports in roles per query role.
3.     Query/Menu roles per info area.
Roles 1 and 2 allow for access and can be transported as often as you want. Role 3 is only to be used as a container of queries to be used by end users and should NEVER be transported again (best practice is to delete if in DEV after transport and NOT assign it to a transport before deletion).
In the publisher role it can be arranged to which role(s) the publisher can assign reports. It is also possible to force users to use a report naming convention in this role.

Adding Transaction codes to CHIPS

I am working on the NW 7.02 version and wonder how to add SAP transaction codes to CHIPS. Point is that I have built a Web dynpro page with multiple containers and different CHIPS: but now I want to include a simple SAP transaction in that same page. I dunno how to do that. Maybe one of u got an idea?

It is all too easy. Jus add the transation within PFCG and they become visible in the CHIP catalog. Just select them and there you go.

Output types assignment with transaction codes(MIGO)

We have different output types in system for output determination in inventory management.
eg: WE01,WA01 etc
Now while GR(101) how system will determine which output type it should use.
Suppose I am doing MIGO, then how system determining it should pick WE01 output type?
Is there any configuration setting telling the assignments of different output types to different transaction codes?
Please advice.
Thanks

It is based on the 7th Step in the below steps
Check following are some of steps for GR collective printing from SDN only
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

Obsolete transaction codes in SAP 4.7 and above

Hi,
Need your assistant here as I need to know the full list of obsolete transaction codes in SAP 4.7 above which mean what are the transaction codes not in use anymore in ECC.
It could be great if can point me to the relevant URL. Thanks

Please check the table PRGN_CORR2 which gives the list of transactions that were changed from different versions from 3.1G to 4.70 and also above till ECC 6.0.
Please also refer to the Oss Note - 991377 for the above table which has a text file with some more transactions. These transactions are missed out in the above table.
Hope this helps you.

Need all transaction codes for idocs

need all transaction codes for idocs

Hi,
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
BAPI tcode --- BAPI.
Also:
IDOC:
IDOC ADMINISTRATION
WE09 / WE02 IDoc lists according to content. View IDocs via specific IDoc number or business application detail contained within the contents of a segment.
WE05 View IDocs
WE60 IDoc type documentation tool
WE20 Partner profile configuration. Add partner detail together with inbound and outbound relationships. We also incorporate message control on the outbound IDocs. Utilize the organizational units to trap functional errors for further processing.
BD87 Reprocess IDocs in error or waiting for action. (Both inbound and outbound in 4.6. Use BD88 in prior versions)
1.4 IDOC DEVELOPMENT
BD55 Conversion rule user exit. Link conversion rule user exit to the different system \ partner combinations.
WE19 EDI test tool. Use to test inbound Function module changes.
WE31 Segment create
WE30 Create IDoc extension type
WE82 Link Release detail to Extension IDoc Type
WE57 Assign function module to logical message and IDoc type
BAPI: BAPI, SWO1.
Transaction codes Related for IDOC Configurations
WEDI: Area Menu for IDOCs
WE02: Display IDoc
WE19: ALE Test tool
WE30: Development of IDOC Type
WE31: Development of IDOC Segment
WE41: Process Codes, Outbound
WE42: Process Codes, Inbound
WE47: Status Maintenance
WE81: Logical Message Types
WE57: Assignment Messages for Appl. Objs
SM59: RFC Destinations (Display/Maintain)
SALE: Display ALE Customizing
BD54: Maintaining Logical Systems
BD67: Maintain methods (inbound)
BD64: Maintenance of Distribution Model
BD87: Status Monitor for ALE Messages
Reward points if found helpful...
Cheers,
Chandra Sekhar.

Transaction Code Comparion in Different Versions

Similar Messages

Maybe you are looking for