Transaction code for change in cost of BOM component
Hi Gurus,
If BOM or any source materials has been updated in the system, the header material need to be re-costed. Is there any existing T-code to get the list of the materials , the changed might impact to.
Regards
Kaisar
Dear Kaisar,
There is no standard T code to meet this requirement wherein you get all the required details.
Only you have to identify and cost it using CK11N/CK40N.
If you are ECM - change numbers,you can identify the made changes by a customized report and then
you recost those materials alone.
Again its a very big customized development.
check and revert back.
Regards
Mangalraj.S
Similar Messages
-
How do I revalue inventory for change in cost?
Hi,
How do I revalue inventory for change in cost? BOM exists for manufactured Portland cement, backflusing relieves inventory per this BOM, however, old cost still appears as valuation for this product. I did a cost estimate for this product (2000000004), marked, and released this product. Effective date of this BOM was 07/01/2009.
kindly help me
Thanks
SuvarnaDear Suvarna,
Once after taking a new released cost estimate for a product,it's stock gets automatically revaluated as per the new price or
say new value.
Can you please confirm whether in the accounting view of the material master you are able to see the last price change date is
same as your cost estimate date.Only then it means the new price was marked and stamped properly and based on the new
standard price the stock get's valuated automatically.
There is no other transaction required for this process.
Check and revert back with your further queries.
Regards
Mangalraj.S -
Transaction Code for Cost Center Report
Hi everyone,
using report painter I have created a cost center report which is a copy of a standard report. Now I would like to create a transaction code for this report which can be run from the menu.
Can anyone explain step-by-step how to do this? I have already tried creating a TC for GR55 but this seems not to be what I want. I want the TC to start the report directly.
Thanks in advance for your help!
Regards,
MartinHi,
Go to SE93 (create a new transaction), choose 'Transaction with parameters'. In the Transaction field put 'START_REPORT' and tick 'Skip Initial screen' flag. Tick all flags for GUI support and in the parameters section (below) type four parameters:
D_SREPOVARI-REPORTTYPE = RW
D_SREPOVARI-REPORT = (library of reports)
D_SREPOVARI-VARIANT
D_SREPOVARI-NOSELSCRN
Regards,
Eli -
Transaction code for viewing Costing Sheet
Hello Sap Gurus,
I am a SAP user.Can you suggest me a Transaction code for viewing Costing Sheet.
Regards,
Pawan KumarDear Pawan Kumar,
For checking the costing sheets related to product cost controlling use KZS2.
For Costing sheets related to Internal orders use KALK.
Regards
Mangalraj.S
Edited by: Mangalraj.S on Apr 20, 2009 3:06 PM -
How to Create Transaction code for a Report
Hi Gurus,
I created some reports and I wants those reports
should be placed in the SAP Menu(initial screen) not
in the User menu in the form of Transaction codes.
I would really appreciate if any one can please send the process to create transaction codes for the User reports/Report groups in R/3 and how to add those created Transaction codes to the SAP MENU.
Thanks in Advance
DanialTry to insert it into the main menu if you must change S000 (there is a function module for everything)? Perhaps SAP protects their menu trees from foreign subnodes in SE43?
Also note that for report transactions you do not need to give the user transaction code start_report. If you do, then they could enter it directly and potentially start many other reports too. The system will call start_report for submitting the report internally without authorizations for it required (unless start_report is maintained in SE97).
Regarding DE, this also confuses me sometimes and I noticed that it generally indicates that I am doing something which has an implication for a SAP standard object. Try either hitting the enter button to see what the next screen is, or, choose original language in the previous screen, or, logon in sy-langu = DE and (remember the path if you dont speak German) change it, or, follow JCs advice to create your own menu. -
Transaction code to change group indicator & group number of a routine
Transaction code to change group indicator & group number of a routine
Post Author: paul.carpenter
CA Forum: Formula
Sorry for the ignorance. I did a little more playing, created a group summary count, then checked it against my record count per group.
All set now! -
Transaction code for Creation of Material
Hi Code Guru's,
can any one please tell me the Transaction code for creation of material.
regards,
Syed Khutubuddin.
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:45 PMHi syed,
Goto T.code MM01 then create Material name,
MM02 is change Material name,
MM03 is display Material name.
<REMOVED BY MODERATOR>
Cheers,
S.Suresh.
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:46 PM -
Transaction code for maintenance view
Hi all
I created a maintenance view and I also generated the table maintenance dailog for the view.Now I am changing the values using the transaction code SM30.But I have to create a transaction code for this maintenance view to access it and update the table instead of using sm30 for this purpose.Please help me.
Thank You.
Regards
Giri.Hi
create transaction using 'se93'
select parameter transaction and give below attributes
Transaction code ZTX1
Transaction text Maintain View ZSDCZTVIEW
Transaction SM30 Screen 0
From module pool
Name of screen field Value
VIEWNAME = ZSDCZTVIEW
UPDATE = X
Thanks -
Assign Transaction Code for Report Painter generated program
I am trying to assign a transaction code for report painter generated program... I assigned the transaction code in Development for the generated program but the program name changes in every system and I get a runtime error...
Can you please guide me on how to handle this problemhttp://dap-consulting.com/yahoo_site_admin/assets/docs/Report_Painter_Reports.47142031.pdf
Found my answer in the above link -
Transaction code to post Target costs to a Repetitive order
Hi,
Could you please let me know the Transaction code to post Target costs to a Repetitive order or Product cost collector?
Thanks in advance for the help.Hi,
Question 1. To check how the systems valuates the Order.While in CO03
1. Click the "control data" tab and take note of the costing variant under header Costing in the field CostingVariantPlan
2. Tcode OPL1 ( Costing variant manufacturing orders) Double click the same Variant you have on the Order.
3. Click on the Valuation variant
a. Material val. : gives the priority of prices used in valuation
b. ActvityTypes/Processes: gives the priority of prices used in valuating activities & business processes.
Question2. What determines wether Variance is calculated on the order is the status of the order and not the overlapping over months. Variance will on the order will only be calculated if the status is either DEL(Delivered) or TECO( Technically Completed) any other status will not trigger variance calculation even if it has a variance key. -
What is the Transaction code for info structure s803
Please provide me Transaction code for info structure s803
hai
try these tcodes
PSO3 Infotype overview
PSO4 Individual maintenance of infotypes
PA20 Display PA Infotypes
PA30 Create/Change PA Infotypes -
How to change price total for "Change Unit Cost Estimate Screen" for KKE1 Tcode ?
There is a requirement of bringing the Material Price in KKE1 while entering the Item Catogory M ( M for Material) from the Gross Price in the condition type (P001) that is entered in the Purchase order.Currently systems brings the material value from MAP(Moving average Price) in the Material Master data.
I have looked into the user exit 1) EXIT_SAPLKKEC_001 2) EXIT_SAPLKKEC_002 available in this T code KKE1.When I put break-point in these user-exit,it is not going in debugging mode while fetching the price value in Price total column for "Change Unit Cost Estimate" screen in KKE1.
How will change pricing condition for material in KKE1?
I want to change price condition for material as marked in red as shown in the screen-shot.
Where will write the code such that I will bring Price Total based on material number as shown in the image?Hi Ram,
I think you can do the same in thei manner.
Go to program SAPMV45A.
use menu GOTO -
> Text Elements----
>Text Symbols
Here make change of Text-002 Sold-To Party as saleable .
Regards,
Pravin -
Standard Transaction Code for CRMD_ORDER
HI,
Can anyone tell me what is the standard transaction code for CRMD_ORDER
Regards
VINIHello,
You mean transaction type? Then for Service Desk it is SLFN. It is not recommended to open Issues (SLFI) directly from the CRMD_ORDER transaction. You can also open change requests (SDCRs) from CRMD_ORDER, and later assign them to the maintenance cycle.
Best regards,
Miguel Ariñ -
Create transaction code for CJE0 report
Dear friend:
Who's know how to create transaction code for CJE0 report.Hi,
Alternatively, you can try adding anew entry to your menu area in development (SE43N), creating a subnode, selecting the report as your option and provide the information. Do not forget to give your own transaction name. I'm quite sure, that in this case (if you will transport this together with the report), it should work.
Regards,
Eli
P.S. I know that program names changes when it's about a writer/painter report. Is it really the same thing with CJE0 reports? -
Creating transaction code for CJE0 reports
Hi,
Can anyone let me know a step by step precess for creating Transaction Code for CJE0 reports?
Thanks in Advance.Hi,
There's just one proper solution:
Via trx SE43N. Steps:
1. I suggest you choose area menu PS01
2. Choose extend to create a new Z-folder (or select 'change' to add to an existing (standard SAP) folder)
3. Create extension , ehancement ID: f.e.: ZPS01
4. Select the new folder in the tree
5. Click 5th button: 'add entry as a subnode'
6. In pop-up 'Add new entries' click button 'Report'
7. Select radio button at 'Drilldown'
8. A pop up appears to select the application class
9. I guess you'll no what to do from here... it speaks for itself.
enjoy, Kind regards,
Gerjan
Maybe you are looking for
-
Use css file in oracle 10g report builder
hi every one i am using oracle 10g report buidler. i want control paramform by usign css file. any body have idea how can i use css file in oracle report builder 10g and how can i modify it's path and i how can i manage any css class on a perticular
-
What type of cable??
My screen went out on my g3 and am trying to connect it to a computer monitor (VGA). Apple does not sell cables for the ibook g3 laptop any more. I ordered two cables (mini display port and mini-DVI) and they were either to small or too big for my co
-
When I go to record a vocal track I get humming through my headphones. The humming is heard in the recording.
-
Multiline labels in the radio button component
How can I have multiline labels on my radio button components? I can't seem to find good documentation anywhere on how to do this. This is the best that I have found: http://board.flashkit.com/board/archive/index.php/t-299514.html but the process doe
-
RE: An error occurred while trying to add the selected printer. Error -9672
I am trying to add my HP 8450xi to my Printer List via Print Utility and get the following message: "An error occurred while trying to add the selected printer. Error -9672." I have tried everything, and this printer is only 2 years old. I was able t