Transaction code for IM Budget document
Hi
Can any one tell me what is the transaction code to see the budget updates on IM program (position). I tried using CJ3B and KO2A/2B but no output.
Thanks
As amul told will give you direct document no. which you have posted with respect to your Im Program/ Position you can also check in CJI8 with that document no.
With Regards
Nitin P.
Similar Messages
-
Transaction code for viewing invoice document and Claims document
Hi Experts,
Can u please tell me the transaction codes for viewing invoice document and claims document in ECC.
I am in CRM and i do not know about the ECC transaction codes.
request you 2 help.
Thanks and Regards
Shilpihi,
MM flow:
purchase Requestion (ME51)
Request for Quatation (ME41)
Quatation from different vendors (ME47)
price comparision (ME49)
purchase order send to vendors (ME22)
goods reciepts (MIGO)
logistic invoice verification (MIRO)
SD flow:
Enquirey (VA11)
Quatation (VA21)
sales order processing (VA01)
delivery (VL01)
billing (VF01)
Also follow this link.
The specified item was not found.
i hope this will help you out
-Thanks & regards
Saurabh Goel -
Transaction code for mass creation of physical Inventory document
what is the transaction code for mass creation of physical Inventory document.
MI31 is the transaction to create hundreds of physical inventory documents for annual inventory at a time.
MICN can create several documents at a time for cycle count.
Just look in the menu of phyiscal inventory into the knot Sessions, there are even more e.g. for counting of own stock a customer and vendor location, for vendor stock at own location etc. -
Transaction code for Proforma invoice
Transaction code for Proforma invoice
Hi,
If you want to create proforma Invoice. First of all you have to maintain copy contol for billing. Where you can maintain in Billing F5/F8 and in source document you can maintain Delivery Document type of Sale order Document type as per your business requirement.
After that in Transaction code VF01 you can create Proforma Invoice based on Sales Order No. of Delivery document No.
Reward if it solves your querry.
Thanks and Regards,
Dilip Shende
Edited by: DILIP SHENDE on Apr 4, 2008 2:09 PM -
Is there any transaction code for uploding logo in ALV reports.
is there any transaction code for uploding logo in ALV reports.
hi,
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
endform.
Upload Logo for REUSE_ALV_COMMENTARY_WRITE
For those who wish to upload and use a picture in your ALV abap reports.
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
or
Import Logo and Background Picture for Reporting
In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
From the SPRO:
HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
Activities
1. Enter the Name of your logo/background picture as an object key in the initial screen.
2. Make sure that the class name is PICTURES, and the class type is OT.
3. Choose Execute.
4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable. -
To Find transaction code for maintenance view J_1BT001WV
Hi Gurus,
I have to find transaction code for maintenance view J_1BT001WV. Plz tell me how can i do it.
regards
RajeshHello Rajesh
There are no specific transactions defined for this view (except for SM30 ).
The IMG activities where the view is used are (check OBJSUB ):
SIMG_ORFB_J_1BT001WV (Assign business place)
J_1BASSBRANCH (Assign CGC branch to plant)
In order to find the view in the IMG call transaction SM30, enter the view and push button Customizing.
The following activites are found on ERP 6.0:
South Korea: Basic Settings for Value-Added Tax Assign Business Place
Business Place (Generic) Assign Business Places to Plants
Official Document Numbering (Indonesia) Assign Business Places to Plants
Nota Fiscal Assign Business Places to Plants
Official Document Numbering (Thailand) Assign Business Places to Plants
Regards
Uwe -
What is the transaction code for where used list
hi,
what is the transaction code for where used list and
how to retrieve the previous delivery quantity and quantity delivered for a particular material with reference to both material document number and material number.hi,
there is no transaction code for where-used-list..
its one of the buttons in application tool bar which if you click will tell you where,in which program or tables etc this object is used.
to retrieve the previous delivery quantity and quantity delivered for a particular material with reference to both material document number and material number,
use tables <b>likp lips and mara</b> and use material number and document number in where condtion.
regards,
pankaj singh
<b>**** please mark all helpful answers</b> -
Transaction code to process Business Documents manually
Hi Experts,
What is the Transaction code to process Business Documents manually in ERP system for FI/CO module. Can anyone help on this.
Regards,
G.NHi Nag,
Try these transactions:
OAOR : Business Document Service: Documents
HRMGE00DOC : Business documents navigator (BDS)
With Regards,
Ravi Kanth -
Need all transaction codes for idocs
need all transaction codes for idocs
Hi,
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
BAPI tcode --- BAPI.
Also:
IDOC:
IDOC ADMINISTRATION
WE09 / WE02 IDoc lists according to content. View IDocs via specific IDoc number or business application detail contained within the contents of a segment.
WE05 View IDocs
WE60 IDoc type documentation tool
WE20 Partner profile configuration. Add partner detail together with inbound and outbound relationships. We also incorporate message control on the outbound IDocs. Utilize the organizational units to trap functional errors for further processing.
BD87 Reprocess IDocs in error or waiting for action. (Both inbound and outbound in 4.6. Use BD88 in prior versions)
1.4 IDOC DEVELOPMENT
BD55 Conversion rule user exit. Link conversion rule user exit to the different system \ partner combinations.
WE19 EDI test tool. Use to test inbound Function module changes.
WE31 Segment create
WE30 Create IDoc extension type
WE82 Link Release detail to Extension IDoc Type
WE57 Assign function module to logical message and IDoc type
BAPI: BAPI, SWO1.
Transaction codes Related for IDOC Configurations
WEDI: Area Menu for IDOCs
WE02: Display IDoc
WE19: ALE Test tool
WE30: Development of IDOC Type
WE31: Development of IDOC Segment
WE41: Process Codes, Outbound
WE42: Process Codes, Inbound
WE47: Status Maintenance
WE81: Logical Message Types
WE57: Assignment Messages for Appl. Objs
SM59: RFC Destinations (Display/Maintain)
SALE: Display ALE Customizing
BD54: Maintaining Logical Systems
BD67: Maintain methods (inbound)
BD64: Maintenance of Distribution Model
BD87: Status Monitor for ALE Messages
Reward points if found helpful...
Cheers,
Chandra Sekhar. -
Transaction code for Open sales order other than VA05
Hi all,
Can any one tell me what is transaction code for open sales order other than VA05.
Please help me .
Thanks & Regards ,
Srikanth P.Hi Srikanth,
You can try below options.
1- VA05N - This can be run for multiple sold to party & multiple material, etc which was not in VA05. But this doesn't have all columns in VA05 report.
2 - You can check the sales order tables from transaction SE11 or SE16N
Try with below tables for your requirement.
Sales order Header data - VBAK
Sales order Item data - VBAP
Schedule Line Data - VBEP
Business data - VBKD
Status header - VBUK
Status items - VBUP
Best regards,
Anupa -
How to create Transaction code for Table Maintanance generator.?
Hi,
I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
Thanks in advance.
Best Regards,
Paddu,Hi,
Check the below steps......
1. Go to Tcode u2018se93u2019.
2. Select ' Transaction with parameters'.
3. Then Transaction 'SM30' with click on skip initial screen
VIEWNAME : XXX9tABLE NAME)
UPDATE : X
4. Maintain the Table maintenance generator
Authorization group : &NC&
Authorization object :
Function group : name(xxx)
Maintenance Screens :
Maintenance type : One step
Maint Screen No : Overview screen (2)
If still u have problem I will send u steps with Screen shot ...send me Yr id.
Regards,
Biswanath -
How to Create Transaction code for a Report
Hi Gurus,
I created some reports and I wants those reports
should be placed in the SAP Menu(initial screen) not
in the User menu in the form of Transaction codes.
I would really appreciate if any one can please send the process to create transaction codes for the User reports/Report groups in R/3 and how to add those created Transaction codes to the SAP MENU.
Thanks in Advance
DanialTry to insert it into the main menu if you must change S000 (there is a function module for everything)? Perhaps SAP protects their menu trees from foreign subnodes in SE43?
Also note that for report transactions you do not need to give the user transaction code start_report. If you do, then they could enter it directly and potentially start many other reports too. The system will call start_report for submitting the report internally without authorizations for it required (unless start_report is maintained in SE97).
Regarding DE, this also confuses me sometimes and I noticed that it generally indicates that I am doing something which has an implication for a SAP standard object. Try either hitting the enter button to see what the next screen is, or, choose original language in the previous screen, or, logon in sy-langu = DE and (remember the path if you dont speak German) change it, or, follow JCs advice to create your own menu. -
How to create transaction code for a Z-table
How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be givenHi Sam,
<b>Procedure to create a TCODE for ZTABLE:</b>
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
<u><i>Se93 --> then which radio button to be selected</i></u>
Select the parameter transaction as a radio button.
<u><i>what is the program nam e to be given</i></u>
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar -
How to create transaction code for maintenance view
hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful. -
Transaction code for vendor account statement for perticular duration
Transaction code for Accounts payable
statement for perticular date
duration...... (from date and to date)Hi,
You can use the following reports, there are quite a few other reports but the ones below can be used easily to tweak to your requirement using the many selection and display options available:
1. S_ALR_87012103 - List of Vendor Line Items
2. FBL1N
Cheers.
Maybe you are looking for
-
7.1 ALC888 card downmix to 5.1 Soundsystem does not work.
Card: NVidia [HDA NVidia], device 0: ALC888 Analog [ALC888 Analog] It is a 7.1 onboard chip and i use a 5.1 Soundsystem. When i put xine to 5.1 output i got the backgound sound but no speach. With xine on 2.0 i can listen all. What is the best way to
-
Where condition for reading infotype while using ldb
hi i want to read info from infotype p0000 using where condition eg: for pernr = ' '. i am using LDB pnp. how can i put the where condition while using macro rp-provide-from-last. regards cs
-
Hello Gurus, I have the HR-Master Data for User to be replicated by using PFAL in R/3 to SRM. can any 1 assist in using this done.plz assist me. its Urgent. about the Plan Version, Object type,Object ID,Search Term, Object status. Thanks Arshad
-
Anyone familiar with XKMS-Implementations?
Hi, I'm looking for people that have some experiences with implementing an XKMS-service. I tried to do it on my own, but I got stuck. That's why I'm posting here. I tried to formulate my questions precisly in various newsgroups and forums but nobody
-
my iphone is very slow specially while using facebook it hangs too many times, i have to restart the phone to get away from this hanging problem i have restored my iphone and still have same problem.