Transaction code for Report painter

Hi Experts,
I have created reports using Report Painter (GRR1).
I want to create Transaction code (TCODE) for reports which was done using Report painter.
Could you please help me how to do this.
Thanks in Advance
Regards
Bujji

You can follow following steps :
1) goto SE93 -> ENter a name for tcode
2)Define the Transaction Code as a Parameter Transaction
3)in the default values for selection-screen block enter the Transaction as 'START_REPORT' .
4)Check skip initial screen , inherit GUI attribute
5)In the default values ->name of screen field, use F4 help to select D_SREPOVARI-REPORTTYPE
6) Against this field ,in the value column Enter 'RW' .
7) again in next row of name of screen field select D_SREPOVARI-REPORT
8) as in step 6 ,enter the name of your report Group to which you haev assigned your Report.
Save and test the TCode.
This should resolve your problem.

Similar Messages

Assign Transaction Code for Report Painter generated program

I am trying to assign a transaction code for report painter generated program... I assigned the transaction code in Development for the generated program but the program name changes in every system and I get a runtime error...
Can you please guide me on how to handle this problem

http://dap-consulting.com/yahoo_site_admin/assets/docs/Report_Painter_Reports.47142031.pdf
Found my answer in the above link

Transaction Codes for Report Painter Reports

Hi,
Can any bodu assist on how can we create a link for the report painter report and the transaction code for the same.
Also is there somthing to be taken care while getting the same transported to another client.
Thanks & Regards,
Ankur Goel

Hi,
Thanks for response.
Actually I created the Transaction code and get the Report and Transaction code transported but when i executed the transaction code in the Receiver Client i gave run time ABAP error.
let me give example:
a) I created the Library, Report Group & Report in my Developement Client.
b) Using SE93 i assigned the program name of the Report to transaction code.
c) Got the Library, Report Group, Report & T.code transported to Quality Client.
d) Executed the transaction code in QAS which gave me error.
Reason identified:
a) Let say Program name created for the report is AAXGHGYGBL010 in my client 010.
b) Transaction code ZREPORT01 created using SE93 for program AAXGHGYGBL010.
c) Now got the Library, Report Group, Report & T.code transported to Quality Client 050.
d) In client 050 program AAXGHGYGBL010 doesnot exist as AAXGHGYGBL050 has been created for the transported Report.
Thanks & Regards,
Ankur Goel

Creating a transaction code for Report Painter

Hi all,
I made a report using Report Painter and I need to create a transaction code for the report. Is there a way to create it in Report Painter or I have to do it with transaction SE93?
Thanks is advance,
Susanna
Edited by: Susanna Gill on Sep 10, 2008 10:08 PM

Simple,
Go To Se93
Give the Ztcode and press create
select the last option (Transaction With parameters)
In the next screen give transaction as START_REPORT
Check the three GUI check boxes
In the default values below give the following
D_SREPOVARI-REPORTTYPE :RW
D_SREPOVARI-REPORT :(Your Report Group)
and you are done.

T-code for Report painter.

Hi
can anyone tell me, Is there any transaction code for report painter or it is an external tool.??
Thanks
Utpal

Hi,
Please check this transaction codes.
GR31/32/33 - Create/Change/Display Report
GR51/52/53 - Create/Change/Display Report Group
Regards,
Ferry Lianto

Create T.Code for Report painter- report (GRR1)

Hi Experts,
I have created report in report painter( T.code - GRR1) using 1vk library, now i want to have a transaction code for my new report.
So, How can i create a T.code for customized report in GRR1.
Thanks
Raj

Dear Raj,
Hope this link will help you.
http://home4sap.com/Blog/2009/08/how-to-create-a-transaction-code-for-report-painter-reports/
Thanks and regards
Praveen.J

Custom T codes for Report painter in FI

Hi All -
I have list of report painter reports (created thru GR31) and need to create custom transaction codes. I need information for following points:
1. How to create tcodes for report painter report
2. We have to transport those tcodes from DEV server to production and client numbers are different, will the transaction codes work when we promote to different server.
Thanks in advance.
Rds,
K

Hi,
Following are the Answers to your Queries.
1. Please refer to [Creating Transaction Code For Report Painter Reports|http://www.google.com/url?sa=t&source=web&ct=res&cd=1&ved=0CAgQFjAA&url=http%3A%2F%2Fdap-consulting.com%2Fyahoo_site_admin%2Fassets%2Fdocs%2FReport_Painter_Reports.47142031.pdf&ei=MiWYS5ilCYeOlAfn4pCGDQ&usg=AFQjCNEZ0YO6vJ97K24MbU_NI5ROTb5vJA&sig2=Ke-svnqddqrz8RMcTuEnaw].
2. Please refer to 5th chapter (Page 90) of this document for [Transporting the Report Painter Reports|http://www.google.com/url?sa=t&source=web&ct=res&cd=3&ved=0CA0QFjAC&url=http%3A%2F%2Fwww.sapficoconsultant.com%2FBonus%2FReport%2520painter.pdf&ei=UiaYS8WOA5KylAei3830DA&usg=AFQjCNEHYqOFUd4XmZeX0JFt80OS-u7-mQ&sig2=dz40ldGpk_iyIRFR-yIxug].
Hope this helps.
Regards,
Chandravadan

Create t.code for report painter in CO-PA

Dear experts!
Now, I'm getting some issue about creating t.code for report painter in CO-PA.
Really, I don't know to create t.code for report painter that is created and run in t.code KE30.
Help me to solve the issue!
Best regards, Huy

Dear Huy,
To create a tcode for report created on the KE30:
1 - Get the parameters from your Z report, on table TKEB2 (on field REPID)
2 - On the SE93 create your tcode with option "Transaction with parameters"
2.1 - On the field "Transaction" fill with START_REPORT
2.2 - Choose the option "Skip inicial screen" and "Inherit GUI attibutes"
2.3 - On "Default Values" use the follow parameters:
D_SREPOVARI-REPORTTYPE <RE>
D_SREPOVARI-REPORT <NULL>
D_SREPOVARI-EXTDREPORT <APPCLASS SUBCLASS+TABNAME REPID>
*This information you got in table TKEB2, eg:
KE 01CE1CPFL ZDREB01
I hope the information has been useful,
Regards,
Melina

Transaction code for report

Hi All,
I am new to SAP area. I have created ABAP program (Report and variant) which generate list of materials. User would like to run whenever they want and have little knowledge of SAP. So I would like to provide Transaction code for this report to user. Can anyone let me know how to create transaction code for report. Also suggest, if any other option available to provide the same to user.

Hi Yogesh,
Just as an option, you necessarily dont need to create a transaction so that the user can run the report. You can include the report in the menu for the user within his role to which he is assigned.
Hence on SAP easy access screen when he logs in, the user would be able to see the report all he needs to do is double click.
Just an option for you.
Regards,
Aditya
p.s. Transaction for role maintenance is PFCG .... refer to your basis consultant for more information

Is there any transaction code for Report Designer,Query Designer and WAD

HI Gurus,
please tell me s there any transaction code for
1 Report Designer
2 Query Designer
3 WAD
Thanks in advance
Prashant

Hi Prashant,
We don't have any Transaction Codes for these.
Since these are installed along with the SAPLOGON BI components, it cannot be called using a standard transaction.
You have to use only .
Goto Start -> Programs -> Business Explorer -> Web Application Designer/Report Designer/Query Designer.
Hope it helps.
Reward with points if helpful.
Regards
Hemant Khemani
Edited by: Hemant Khemani on May 16, 2008 5:39 PM

Creation of Transaction code for Reports created in FGI1.

Hi all,
   We are in ECC 6.0 version. We have created one report for Profit Center Group Wise Receivables with transaction code FGI1. When we executed the report from FGI5 , it was showing the values correctly.
   We created the t.code for the report painter programe and tried to execute. The screen is different from that of T.Code: FGI4. When we executed , it was not showing any values. I created authorisation for the report and also for the transaction codes.
   Appreciate your suggestion at the earliest.
Thanks
Dasa

Hi
Check TSTCP table for the existing t-codes and for creating check this link
Re: Transaction Code Creation for a Table/View
Regards
Pavan

How to create t.code for report painter report created using CJE5

Hi All,
I'm trying to create T.code for a report painter program created using CJE5.
I using the D_SREPOVARI-REPORTTYPE as "RE" and
D_SREPOVARI-EXTDREPORT as KP 01RPSCO_X <report name>
If I provide spaces between KP 01RPSCO_X <report name>, its not allowing spaces.
If I didn't provide the space then its saying that "report does not exists"
Please let me know how to overcome this issue?.
What this KP & 01RPSCO_X stands for? Is this always constant?
There is a similar kind of transaction in other system which Looks like this " KP 01RPSCO_X <report name>" spaces in between
I dont understand why its not allowing spaces in this system. As its in different system i cant make a copy of this transaction and change the parameters.
Edited by: Mr A on Feb 18, 2010 5:28 PM
Edited by: Mr A on Feb 18, 2010 5:54 PM

thanks for giving me the link.
I searched for all these link in SDN before posting itself.
my issue is how to give the value for the parameater EXTDREPORT.
If i give spaces for the value KP 01RPSCO_X <report name>, its throwing error, T,code its self is inconsistent.
if i didnt give spaces its i'm able to create the t.code, but when i execute it, its giving error message saying "report does not exists"
but if i go to CJE5, that report is there.
thanks

T.Code for Report painter report

Hi,
Is there a way to assign a T.Code to the Report painter report, so that users do not have to go to GR53.
thanks & Regards
Rose

thanks Eli, I tried this in Sandbox and it looks good.
You seem to know a lot about Report Painter, I hope you would be able to certainly help me understand this :
My predecessor here, created a report painter report and then asked the ABAP team to copy the report painter program (its like a query name) to a Z Prpgram and assign a transaction code. As I hear this was done to avoid the authorization issues.. (???) when this was moved to Testing Dev client, all this worked But when we moved this to QA, the error "program doesnot exist" made us to change the zprogram to remove the logic that the program had to check for the Client, in which the report was created. We removed that but then it then includes started giving the same error. so this will surely not work.
So, my question is : when this simple way of giving a report painter report a t.code with the defaults, would there be any auth issues that you can think of ???
thanks in advance.
Regards
Rose

Attaching a Transaction Code to Report Painter Report

Hi All
After creating a report painter report in GRR2 ... I tried to attach it to a transaction code in SE93...
But am not able to do so?
Is this possible and if so how is it done?
Thank you
Rukshana

I assume that you were copying the report/program from one environment to the next? DEV->QA->PRD
Using the Elias' example above, for program name, ensure that the last portion of it coincides with the environment in which you are executing the transaction code.
GP4FGHMLN5Z2Q5MDAN2A89TGV1K010.
Notice the '010'? Is that the client number for the environment in which you wish to run this program?
If your PRD environment is for example, client 100, then you will need to change the t-code to point appropriately to the program for that client. In this case (using my example), the program name to be referenced by the t-code would be:
GP4FGHMLN5Z2Q5MDAN2A89TGV1K100.
Try that out. If all else fails, if you have access to t-code SE38, search for your program name (except for the last portion, etc.) with a wildcard (*). If you find the program, run it to make sure that this is what you were expecting. Now that you have the correct program name, use that in SE93 for your t-code.

How to assign Transaction code for report program?

All,
I have developed a custom report. I want to associate it to a transaction code. How to do it?

Hi,
Please follow the steps for creating a transaction for report..
GOTO SE93
Give the transaction code.
Press create button..
Enter the short description..
Choose the radio button which says "Program and selection screen(report transaction)".
Press Enter..
Give the program name..
Remove the Selection screen "1000" if you want.
Save the transaction code..
Regards

Transaction code for Report painter

Similar Messages

Maybe you are looking for