Transaction Code IQ02 - Other Tab

Hi,
I have managed to create a bepoke subscreen in the transaction codes IQ01/2/3 using the Project ITOB0001.
My problem is with a standard subscreen that is also output. This subscreen is namesd Vendor/Customer Data.
It appears that my subscreen can not be very big due to this standard subscreen.
Is there anyway to not show this standard subscreen.
Thanks
Martin

Hi,
Compare the time zone set for both the users.
Regards,
Nirmal.

Similar Messages

  • Transaction code J1IH other adjustment accounting entries

    Hi,
    While doing excise JV tranaction code J1IH other adjustment the system showing below  accounting entries if tick the determine  gl account 
    Excise duty paid A/c
    To SEC payable on excise duty
    To Excise duty payable-ExGrp
    To ECS payable on excise duty
    the above entry at time of saving its  posting the below accounting entries
    Excise duty paid
    To PLA-SEC-
    To PLA-BED
    To PLA-ECs.
    Can any body suggest me for the above acocunting entries.
    Thanks
    Ram

    Hi Prashant
    You need to check the excise balance for your company code Excise Group. Chances might be there for another company code and excise group cennvate balance are there for company code for which you are carrying J1iH is 0.
    Regards
    Vivek Sharma
    -- Reward if helpful !!

  • Fi validation -exclude tr code from other modules

    I am setting up a validation at the Fi line item level. Now it is restricting some documents comming from MM which we don't want to. Is it possible to exclude some of the transaction codes from other modules to not to consider this validation.
    I tried SYST-TCODE <> (T-Code from other modules like MM for eg: MIRO etc)
    But that does not seem to work.
    Does anyone know why and are there any options to get this done.
    Any help will be appreciated

    Hello,
    Please validate BKPF-AWTYP (reference procedure)
    For postings done in FI its, BKPF and so for others it would change.
    This would be simple.
    But for this check whether this field can be used for validation.
    This can be done by checking table GB01, if not change the settings to make this field available for validation.
    Best Regards
    Anantha

  • How to stop user from using 961 mvt type in MB1C transaction code?

    Hi Friends,
    We have two companies. Already we have restricted end user for using 961 & 962 mvt type in MB1C transaction code in one company code 1000. Now, we want to restrict end user for using 961 & 962 mvt type in MB1C transaction code in other company code 1200.
    I have checked configuration using OMJJ transaction. But, it is there so there may be some different way of control.
    Can any body help me?
    Regards
    Siva

    Hi,
    To restrict/block the movement type,  the steps are:
    1. use transaction code OMJJ.
    2. Enter the movement type you want to block.[From 961 To 961](do for both961& 962)
    3. Select the Second option in the List which appears in the left. (Allowed Transaction).
    4. Remove the transaction codes (MB1C)from where you do not want to use that particular movement type& save.
    For user specific to block the movement type, pl consult Basis Consultant.
    Regards,
    Biju K

  • How to assign Authorisation to a transaction code

    Hi ,
         I have created a report and i have assigned a transaction code to it.
         But i want only 3 users to access the transaction code when others try to access the Transaction code  there should be a message saying that they are not authorised to view that.
    Can someone help me out in this regard

    Hi Arvind,
    Go to TCode SE93 enter your Tcode and Change it. There enter Authorization object as S_TCODE.
    Cheerz
    Ram

  • Excise Invoice tab In MIGO transaction code

    Hello
    Could any body suggest, In Excise Invoice tab In MIGO transaction code I am getting "06  No Excise Entry" no otehr fields are coming.? All options like
    01     Capture & Post Excise Invoice
    02     Refer & Post Excise Invoice
    03     Only Capture Excise Invoice
    04     Only Refer Excise Invoice
    05     Only Part1
    Should come. Infact in my SAND Box client it is o.k but with same setting Golden Client it is not coming.?
    Thanks & Regards
    Sudhansu

    Hi,
    These options are coming from Excise Group settings.
    Go to : SPRO-Logistics General-Tax on Goods movements-India-Basic settings-Maintain Excise Groups-in 'MIGO Settings' tab, select the check boxes, accordingly you will get the options in Excise Tab of MIGO screen.
    Hope this will resolve your issue.
    Regards,
    Gopi Chand

  • How to create Transaction code for ABAP and execution by other user

    Hi All,
    Could someone please let me know how to create transaction code in detail for ABAP program. Step by step procedure expected. I would like to know how other user can execute the report using same transaction code which I have created.
    More about authorization.
    Thanks in advance.

    Hello,
    You can create transaction code from se80 as well.In object navigator,right click on your program name and create->transaction code.You can create transaction and select if it is only a report,a report with selection-screen depending on your requirement.You can run your report directly by entering the transaction code in the command field.
    You can authorise the users who can use your transaction:
    <b>Authorisation objects</b> are used to restrict certain transactions to users.Critical data must be protected from unauthorised users.For example,the head has access to certain data.But it cannot be accessed by his subordinate.For this we need to define <b>roles</b>.
    •Create an authorization object with transaction SU21.
    An object usually consists of the ACTVT (activity) field and one other field,which specifies the data type to be protected.By ACTVT, we can decide if the data is accessible for change,display only etc.
    •Add authorization fields to the authorization object created.
    •Assign the authorization object to the transaction using SE93.
    Attach the authorization object to the role using transaction PFCG.
    If you want <b>to assign roles</b>,use transaction PFCG.Create a new role.In the AUTHORIZATIONS tab,you can get a self generated profile name and a profile text by clicking on the icon next to it.Then go to the "Change Authorization data" and choose an authorization template.Then you can choose to display/change/create an activity and after the selection,click on the red and white circle.The profile will now be created.
    In the user tab,you can give the user details who can use this role.
    <b>Also check this link:</b>
    http://www.*********************/r3_security/r3_security_tips.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/52/6716a6439b11d1896f0000e8322d00/content.htm
    <b>Very helpful guide:</b>
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
    Regards,
    Beejal
    **Reward if answer is helpful

  • Creating additonal tab in Transaction code CJ01/CJ02/CJ03

    Hi All,
    I have a requiremnt to add addtional TAB in transaction code CJ01/CJ02/CJ03 with new fields.
    The tab needs to be added in the WBS detail Screen option within the Detail option on menu bar.
    The tab should come after Admin tab.
    I have tried using CNEX007, but it creates a separate screen in WBS Customer fields option in the menu bar(Under Detail).
    Can somebody please tell me how i can do this or if it is possible at all?
    Thanks in advance for your inputs/Help.
    Regard/Ajay

    hi
    just have a look at this thread
    Re: Enhancement for CJ01,CJ02
    hope this helps
    regards
    Aakash Banga

  • PFCG issue - removing transaction codes from menu and not clearing up the authorization tab

    I’m using SAP ERP version ECC6 and EHP5 and also we have updated our system with the PSCD FI module.
    I’m having the following issue in PFCG transaction code - I have created a new single role by copied other or from scratch and added few  transaction codes into the menu.  After that, I went in the authorization tab using the "Change Authorization Data" and I felled all the missing information until the role was green out.  I generated the role then I totally went out.  I come back to the same role that I created earlier and I did removed all the transaction codes from the menu and I did find the following:
    - the Authorization tab light didn't change from green to red
    - I went into the Authorization tab by "Change Authorization Data" and a part of the objects were still in.
    Normally behave should be:
    - when we remove one transaction code from the menu the light from Authorization tab should change from green to red.  When you empty the menu then the light color should change also, but the authorization tab should be also empty.
    Could please give me some idea how to do it next?

    Hi Gabriela,
    Most of the times standard roles contains manually added authorization objects. When ever you are creating a new role by copying the existing standard role so by default, these objects will come in to new role.
    Now, coming to your role. After removing t code from role if nothing has changed in Authorization tab means.
    Here are the possible reasons.
    1.  The t code which you have removed might not have any checked and maintained authorization objects, that's why your Authorization tab still in unchanged.
    2. Rememeber, when ever you are adding or removing t code from menu always use expert mode for profile generation option along with "Read old status and merge with new data" Option.
    This will bring the all checked and maintained data for each t code.
    3. After removing the t codes from menu and if you generate the Authorization tab by using expert mode option still if you find authorization objects means, those are manually added authorization objects that's why those were not removed.
    I hope this will give some clue to your issue.
    Thanks,
    Siva

  • Transaction code for Open sales order other than VA05

    Hi all,
    Can any one tell me what is transaction code for open sales order other than VA05.
    Please help me .
    Thanks & Regards ,
    Srikanth P.

    Hi Srikanth,
    You can try below options.
    1- VA05N - This can be run for multiple sold to party & multiple material, etc which was not in VA05. But this doesn't have all columns in VA05 report.
    2 - You can check the sales order tables from transaction SE11 or SE16N
    Try with below tables for your requirement.
    Sales order Header data - VBAK
    Sales order Item data - VBAP
    Schedule Line Data - VBEP
    Business data - VBKD
    Status header - VBUK
    Status items - VBUP
    Best regards,
    Anupa

  • What is the tc or tab to fine all HR Transaction codes?

    Dear Friends,
    Can any one tell me what is the Transaction code or table number to see all the HR functional related transaction codes.
    Thanks in advance,
    Regards,
    sai prasad

    Dear Sai,
    1. You can get the list of Important(Frequently Used)  T Codes on
    http://www.sap-img.com/human/sap-hr-transaction-codes.htm
    http://www.sap-basis-abap.com/saphr004.htm
    2. There are so many T-Codes in HR that we cant remember all of them...
    However if you need to know more T Codes( other than  in 1. Above)  then you can copy paste from SE93.
    Hope this Helps.
    Regards,
    Param

  • Reflect the details of data in same transaction but in some other tab

    Hi Experts,
    I am trying to update some data in the transaction IW32 (tab "Enhancemnt") and wants to reflect the details of that data in the same transaction but in some other tab "Objects", before saving the changes i.e. as soon as I click on "Objects" tab, it should get reflected.
    for this I hav used a Bapi at the screen exit, but the problem is that if I try to commit it, then the data after fullfillment of my requirment doesn't get saved even if I try to save it.
    and if i dont use commit then it won't be possible to save and reflect the changes as reqd.
    Waiting for your skillfull sugesstions at the earliest.

    Hi ,
    data mismatch is kind of short dump error .. check for  short dumps in st22 . are you getting all the short dumps from same source system.. then check the system performance of that system st04,
    and rather then checking from psa .. you can check the job overview of the load ..and check wether its progressing or not .. you can make the simply red and repeat it ..but if the loads are through psa then its betther you push it from psa rather then restarting the laod again it will take more time ..
    Regards,
    shikha

  • I Forgotten My Restriction Code!! How Can I Get It Back????And My "other" Tab In iTunes Is REALLY Large!!! Reply ASAP

    So I Put A Restriction Code 3 Months Back And Now I Forgot It What Should I Do??? Plz Help!!! And My "Other" Tab On My iPod Is Large And It Took 2.5 Gb How Can I Remove This???

    For the Restrictions passcode, you need to restore the iPod to factory defaults/new iPOd.  That will also eliminate the large "other".

  • Why i can not see the columns of "Tax Category" in transaction code FS00

    Dear Experts,
          Why i can not see the columns of "Tax Category" and "Posting without tax allowed" in tab of "Control Data"  transaction code FS00?
           How can i add the columns of "Tax Category" and "Posting without tax allowed"?
    Looking forward to your reply.
    Best Regards,
    Merry

    Hi,
    Go to transaction OBD4, and check whether the field "Tax category" is suppressed in group "Account control" for your GL account group.
    If not, then go to OB26 and check the field status for the same field for create, change activity.
    Regards,
    Gaurav

  • Transaction code KOAB

    Transaction code KOAB is open for change even if client is closed. Will it be possible to change the setting of this transaction code so that , it will be open in change mode only when client is open.

    Hi,
    Good catch Actually, S_TABU_CLI is required only for cross client maintenance tables. However, as you highlighted the client should be open to modify the entires from KOAB transaction code. In your case, I infer that the tcode is allowing even the client is open
    This is true if the table belong to Delivery class C. You can check the same from SE11-> Enter the table name -> and Maint.Status tab. I suspect that the Delivery class is set to A in your case
    Note - You can verify the tables that are required for the code KOAB from SE93. It uses the program RKKOT2.
    Hope this helps!!
    Regards,
    Raghu
    Edited by: Raghu Boddu on Dec 22, 2010 9:47 PM

Maybe you are looking for