Transaction code to find Process message and Process Instruction
Hi
I am new to PP module
Where do i find (In which Transaction) the list of
a) Process Message Category
b) Process message
c) Process Instruction Category
in SAP ERP system??
Regards
Sweety
Hi
Thank u all for responding
Still I was not able to find certain Process Messages like YQ_AIR, YQ_RPM, YQ_TEMP, YQ_CONS, YQ_PHCO, YQ_PHCO2.
and Process Instructions like
YQ_AIR, YQ_ENDPI,YQ_HEAD, YQ_INSTR, YQ_LAY, YQ_MATLI, YQ_PROD, YQ_PTEXT,YQ_RPM, YQ_TEMP, YQ_CON1, YQ_CON2..
do I need to do some (Basis) configuration to get these?? or the above mentioned Process Messages and Process Instructions are not pre defined??
Regards
Sweety
Similar Messages
-
Transaction code MB02 - Issue with Printing and Process overload SM50
Hello Experts,
We are actually having a problem when trying to print a smartform in tcode MB02. Also, when verifying transaction SM50 for that process then we noticed that there was a timeout after a big data load.
Here is the scenario:
1. Entering a material doc 9999 and Press enter
2.Select and double click a line item for that material doc
3. Click on Messages
3. Select an output type and click on Repeat output
4. Click Save
5. Click Save again.
In a normal case, a screen would appear for printing but this time nothing seems to happen. And then when we go to tcode SM50 and check that process there is 2-3 dumps.
As a newbie programmer I do not understand any of these procedures properly. If anyone can shed any light on this, i would be grateful.
Regards,
ThyagaHi everybody,
Thanks for your answers. Actually after a lot of time spent on debugger i found that the variable returncode is 999 and then a subroutine is called which in turn calls my program to trigger the smartform.
The problem is throughout my program i do not change the value of the returncode .i.e it remains 999. What i did then is change the returncode 999 before my smartform-program is called then after testing i see that the output is printed without any error.
The program and subroutine i am talking are as follows:
1. Program: RSNAST00
2. Subroutine: programm_aufrufen
3. Line 1297 returncode is 999
4. Line 1318 - my smartform program is called
5. Then at 1324 - on control is done on returncode.
Please advice if these steps are conform/ethical. Also, can you suggest any other steps i can do without the need to modify my own program.
Thank you very much for your replies.
Kind regards,
Thyaga. -
Transaction code for viewing invoice document and Claims document
Hi Experts,
Can u please tell me the transaction codes for viewing invoice document and claims document in ECC.
I am in CRM and i do not know about the ECC transaction codes.
request you 2 help.
Thanks and Regards
Shilpihi,
MM flow:
purchase Requestion (ME51)
Request for Quatation (ME41)
Quatation from different vendors (ME47)
price comparision (ME49)
purchase order send to vendors (ME22)
goods reciepts (MIGO)
logistic invoice verification (MIRO)
SD flow:
Enquirey (VA11)
Quatation (VA21)
sales order processing (VA01)
delivery (VL01)
billing (VF01)
Also follow this link.
The specified item was not found.
i hope this will help you out
-Thanks & regards
Saurabh Goel -
What is Processing Method and Processing Class in Action Profile
Dear all,
I have defined an action for case management, to trigger an email after saving the case in Enterprise portal.
Action is getting initiated in case document after saving, but after a while it is showing message 'Incorrect'.
In the actions monitor report, error message showing that some problem in Processing Method.
In my action I have maintained settings as below.
Form name - SCMG_SMART_FORM_CASE
Processing class - CL_SCMG_CASE_CONTEXT_PPF
But I don't know what processing method should I give
I could not find and values under F4 functionality.
Please do advice me what method I can use here.
and why we use processing method and processing class.
your help will be highly appreciated.
Thank you
Raghu ramHi
DSD means Daily Salary Deduction for more check this table to understand abd DSD and the respective Processing class 77 V_T7INO1 -
When I try to download Adobe CreativeCloud with my code I receive this message and cannot succeed the operation.
See the message below and help me to finish this operation and install the soft :
Le pays dans lequel cette carte a été achetée ne coïncide pas avec votre ID Adobe. Essayez de vous connecter avec un autre ID Adobe ou prenez contact avec nous si nécessaire. Contacter le support techniqueJkpakpo please utilize a different web browser or install the Adobe Creative applications through the Creative Cloud Desktop application. You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
-
Transaction code to find return code for transport request
Hi,
I want to see the return code for transport requests after importing to QAS from DEV. What is the transaction code to find return code and can you explain in brief.
Thx,
Vasuyou can check it out in STMS
wht you can do is ,,
Run Tcode STMS > Overview imports (F5) > you will find all import queues > then click on the import queue in which u want to see the status of transport (DEV , QAS , PRD )
> then find out the transport no > click on that > then click on logs or press ( ctrl + f4)
Return code
Meaning
0000
Transport performed without errors
0004
Warnings were issued. All objects were transported successfully. There were special actions for individual objects that may not have been intentional, for example, a warning is issued during the export if the request contains an object deletion.
Read the warnings.
0008
Individual objects could not be transported successfully. You must analyze and correct the errors. Examples of import errors: Original object was not overwritten, Repaired object was not overwritten
0012 or higher
A critical error has occurred, probably not caused by the contents of the request. You must inform your system administrator.
http://help.sap.com/saphelp_nw70/helpdata/en/57/38e26c4eb711d182bf0000e829fbfe/content.htm
Hope this information will help you ,,
Cheers
dEE -
What are the difference in transaction codes in 4.6 C and ECC 6.0 HCM syste
Hi
What are the difference in transaction codes in 4.6 C and ECC 6.0 in HCM SAP.
Regards,
SanjayBelieve there will not be any change in Tcodes.
check these links
http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes
http://service.sap.com/upgrade for functional
https://websmp105.sap-ag.de/upgrade -
Calling a transaction code in between the program and use the output
Hi frnds,
i want to call a transaction code in between the program and pass the input .After getting the output, use that output in the programHi Navin,
Why don't you sit with ABAPer he can explain better.
Regards,
HAri. -
What are process type and process variant in process chain?
hi all,
Can anyone explain me what is process type and process variant in process chain ?
regds
hariHi Hari,
this is standard SAP Links, u may understand ....
http://help.sap.com/saphelp_nw04/helpdata/en/6e/192756029db54192427cf6853c77a7/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
Thanks, KR -
Transaction code to view/edit IT0007 and IT0008
Dear SAP Guru's,
Can you please tell me the transaction code to view/edit IT0007 and IT0008?
Sincerely,
KetanHai..
PA30/PA20 -
Scenario to recevie a message and process the fields
Hi,
I am new to JMS and I have a scenario :
I will be getting a message from MQ queue and I have to read that message object and parse using a delimiter | and process the fields to a POJO class to pass to another program X.java.
Now X.java will pass the parameters to a web service and print a document.
So It would be great if you can help me out on steps to acheive this task. I am reading about JMS and understood that i have to code a MDB class which reads the message object in onMessage method ?
Thanks
MohitHi,
I am new to JMS and I have a scenario :
I will be getting a message from MQ queue and I have to read that message object and parse using a delimiter | and process the fields to a POJO class to pass to another program X.java.
Now X.java will pass the parameters to a web service and print a document.
So It would be great if you can help me out on steps to acheive this task. I am reading about JMS and understood that i have to code a MDB class which reads the message object in onMessage method ?
Thanks
Mohit -
PPPI Process messages and check status
Hello.
Does anyone know of any method from xMII to get and check status of process messages sent to PP-PI?
E.g. check for status (has it been sent) and for any errors?
BR
Poul.Hi Poul,
I found a few RFCs which might do the job and will list them here so you can test them:
PROCESS_MESS_DOWNLOAD
PROCESS_MESS_EXCHANGE
PROCESS_MESS_GET_RETURN_CODE
PROCESS_MESS_UPLOAD
My search method is kind of funny. I put PROCMESS* into the search pattern of a SAP_JCo_Interface action block to return a list of related action blocks. But since I can't use BAPI in SAP and must rely on SE37, I can't readily see the documentation to determine relevance. But I suspect you can take if from here. I would be interested in knowing what you come up with for these.
I also tried PROCMSG* and get these:
BAPI_HU_PROCESS_MSG
BAPI_HU_PROCESS_MSG_DIRECT
BAPI_LIKP_PROCESS_MSG
BAPI_LIKP_PROCESS_MSG_DIRECT
Where HU stands for Handling Unit, but I can't seem to find out what LIKP refers to.
Hope this helps and maybe together we can get the information.
Thanks,
Mike
Found a couple more
RSAP_GET_MSG_TEXT
RSSM_GET_MSG_TEXT
You may also be able to use RFC_READ_TABLE, but I do not know the table structures which would be of interest.
Edited by: Michael Appleby on Jul 16, 2008 3:07 PM -
Transaction code to display exception messages by material and plant
Hi,
Is there a transaction code or standard report in SAP to display exception messages by material and plant? I see the exception messages by individual material and plant in MD04 but I need to see a collective view. I tried Collective access in MD04 and MD46 but they are not giving me exception groups but I need exceptions listed out by material and plant.
Thanks.Visu,
I have never seen such a report.
MD06 does support fine tuning the output display, once the list has been generated. If you use this feature, the resulting display is the entire list as created by selecting the initial parameters (such as exception group), but with the specific items that contain your selected message highlighted. If you are addressing the messages interactively, you can select the review (glasses) screens, and scroll through just the ones which contain your selected exception message(s).
To try this, execute MD06. Select the groups as necessary. Execute. Wait for the list. Now, immediately, select 'search' (binoculars). Experiment with the output.
As mentioned in the previous post, if MD06 does not meet your needs, you will need to have a custom report written.
Rgds,
DB49 -
Dear All,
I have created one finished product and one raw material. In Master Recipe i created one Phase and assign two instruction category CONS_1 and PROD_1.
Now i generated PI sheet in COR2 and see CO53 that it is present and now i send it and in CO60 it is there.
Now when i see and enter quantity in PIsheet and double click on it to see the Process Message
1) PI_PROD has material number of finished product - It is ok
2) PI_CONS has also material number of finished product but it should have raw material number.
So, my issues are
1) How raw material will be there in PI_CONS Process Message.
2) Should i create two phase and assign it one by one or what else.
3) If i have Process Order of 500 quantity and through PI Sheet i do GR of 10 and GI of 10 then for next time how should i do GI and GR again. Should i send PI Sheet again from CO53 to CO60.
4) Is there only one control Recipe is generated for one process order.Hi,
process instruction CONS_1 will not show raw material number it will show reservation number of the process order...instead of using CONS_1 use CONS_D and use this control recipe destination and make the settings as shown below...
your final PI sheet output will be like this....
Hope this helps...
Thanks
Kumar -
Finding spot color and process color
Dear all,
I used the following code to find the spot color used in the document.
var length=app.activeDocument.spots.length;
for(i=0;i<length;i++){
alert(app.activeDocument.spots[i].color);
It is showing CMYK Color as the output.
Can anyone tell me wheather it is a correct output.I want to identify all the spot color in the current active document.
Also please help me finding out the Process color used in the document.What is the diffence between these two ?
Regards,
SanatSanat,
Even if a color is Spot, it still has to have CMYK or RGB values (depending on the color mode of the document) to tell Illustrator what color to display it as.
Beyond that, though, you're going to run into another problem anyway: Any Swatch that is defined as Global is going to be counted as a Spot Color. (I've been complaining about this for years.)
For example:
var docRef=app.activeDocument;
var count=docRef.spots.length;
alert(count);
for(i=0;i<count;i++){
alert(docRef.spots[i].name);
Run that in a CMYK document in which you have removed all unused palette items. You'll find that it returns [Registration] as a spot color, just because it's set to Global. Now doubleClick the Black Swatch. Set it to Global (but not Spot). The sript will tell you there are two Spot colors.
JET
Maybe you are looking for
-
Macbook won't get past the grey start up screen
I purchased my Macbook in 2008, roughly July. My fiance unknowingly shut down my macbook in the middle of start up. Before that it was running perfectly fine, I had no issues. After my fiance stopped the start up, the macbook won't turn on. It'll loa
-
Function module to get manager of a user
hi, I am desparatly looking for a BAPI / RFC giving be a list of all directly managed subordinates of an user. using HCM_GET_ORGSTRUCTURE_AS_XML is great but since I do not have information about relationships, I can' tell for sure who is manager of
-
Movie Purchases and 5.1 Surround
Recently I've been noticing some movies (such as Casino Royale and the just released Australia) come with 5.1 Surround Sound. When these are downloaded through iTunes, will they play in Surround on a Machine (given a proper system of course) or is it
-
How to remove documents and data in iPhone 5?
Before it was "Others" that was taking up so many spaces. After upgrading to iOS7, it is now "Documents & Data" that's taking up 8.86 GB of space. How to fix with out downloading 3rd party app?
-
IWeb templates & modifications
I just installed iLife 08 on my iBook. There were some features that I really liked and wanted. But, it looks like you don't have as much freedom of design as in the previous version. In IWeb 06 you could set gradients, pictures, etc. as background o