Transaction Code to see the integration points between modules

Dear Gurus,
I came to know that, there is a trnsaction available in SAP ECC to see the integration points between modules.
Eg. PP-MM & MM-PP
If anyone found pls post it here.
Regards,
Siva.

HI Siva
Plz tell us from where you came to know, since we all havnt yet got that Tcode.Its various settings and configurations and Masters which intergrate the various  Modules like PP SD FI CO etc.
BTW
For  PP-SD
Availability Check in Material master,MTO Scenario-MRP Run, thru Sales order 
PP-MM
Material Master ,Goods movement ,STO, Reservation , Purchase Requisitions, Purchase orders , MRP Run
Quota arrangements etc
PP HR
In work Center capacity
PP QM
QM view Inspection type for each type of material
PP CO
Activities Confirmations COPA
PP PM
Euipment master, workcenter euipment
I hope it is clear to you now
Regards
Anupam Sharma

Similar Messages

  • Transaction Code for seeing the files in the  Application Server

    Hello All,
      Can anybody please give me the transaction code for seeing the files in the Application Server
    Thanks in Advance,
    Regards,
    LIJO.

    hi
    good
    try with tcode AL11.
    thanks
    mrutyun^

  • What is the transaction code for see the Web Services available in SAP

    Hi
    I came to know that SAP has provided its own webservices... I need some information on that... If any one has documentation on that can u please send it to me... My ID is <b>[email protected]</b>.
    What is the trasaction code for see the web services available in SAP.... Can any one help.. Please its  urgent
    Best Regards
    Ravi Shankar B
    Message was edited by:
            RaviShankar B

    Hi,
    you can find Web Services (Enterprise Services) in the Enterprise Services Workplace (ES Workplace). The ES Workplace allows you to explore, test, and use enterprise services to make enterprise SOA tangible. Here, you will find all of the currently productized enterprise services by SAP.
    Best Regards,
    Boris Mueller
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/esa/esapreview">ES Workplace at SDN</a>
    <a href="http://esapreview.sap.com:82/socoview(bD1kZSZjPTgwMCZkPW1pbg==)/flddisplay.asp">ES Workplace</a>

  • Transaction code to see the archive file logical path

    Hello,
    Some data is archived.
    In which transaction we can get the archive file logical path.
    ( Just like transaction al11 for sap directories )
    Thanks..
    Vijay

    Hi Vijay,
    Check transaction FILE or use FM FILE_GET_NAME_USING_PATH or FILE_GET_NAME_AND_LOGICAL_PATH
    to retrieve the path.
    Also check program RSFILENA and table PATH.
    Thanks
    Lakshman
    Message was edited by: Lakshman Tandra
    Message was edited by: Lakshman Tandra
    Message was edited by: Lakshman Tandra

  • Transaction Code to see all automatic account determination GL

    Hi All
    Please let me know the Transaction Code to see all automatic account determination GL like FI -GL integration with other modules/ submodules like AA,MM,SD, FM,CM etc. I tried with FBKP, but it is not giving all.
    Regards
    Sekhar

    Hi
    OMWB  will give  you  account determination by  parameter selections combinations  viz,
    1)  plant / material / movement types
    2) by company code / valuation area
    3) the  account  determination in  OBYC  can also be seen here.
    Thanks
    kamala

  • Transaction code to see function group

    transaction code to see function group

    Avinash,
    there is separate T Code function group. SE37 and then go through the menu.
    Go To--> Function Groups.
    Regards,
    Ravi
    Note : Please reward and close the posts.

  • What is the T-code to see the stock at tank level?

    What is the T-code to see the stock at tank level?
    Regards
    S.Senthil

    Hi Senthil,
                    In Order to Overview the stock at tank level do the following:
                1. Tcode-   O4_TIGER
                2. In the screen launched set the 'Transaction' Field as 'Stock Overview'.
                3. In the 'Pre selection' frame, enter the Storage Location and the Seq. No (Tank ID) details
                4. On execution you will get to see a Report. Refer to the 'Corr. Book Stock' column for the available stock.
                5. If there are more than one materials assigned to a tank. Click on the line item of the Report to see the break up materialvice.
    P.S: To fine the seq No of the tank use tcode 'O4NA'.
    Please let me know if this has helped you.
    Regards,
    S. Satish

  • Integration points between SD and PP

    Can some one explain the integration points betwwen Sd and PP. Related materials would be very help plz
    thanks

    SD and PP Link
    In SAP, there are basicaly some configurations items which provide link between SD and PP, to mention some of them:
    - Requirement type
    - Requirement class
    - Checking group
    - Checking rules
    In operation wise, depends on the mode of manufacturing. There 2 basic modes of manufacturing: make to stok and make to order. There are many variants in between, but let just concentrate on the 2 basic types.
    1. Make to stock
    - Production department will produce finish goods base and stock them on the warehouse. They will produce the goods base on forecast. In this case the link is in the forecasting module of PP where all the historical sales order can be taken into account to create a sales forecast.
    2. Make to order
    - Production department will only produce the goods when there are sales order created.
    - During data entry, user can select product variant and this information must be transferred to PP module.
    - The sales order number can be reference during planning and production of the goods.
    - The stock can also be referenced to a sales order number.
    - The product costing module can also refer to sales order number so that if you wish you can identify the margin for each sales order.
    Regards,
    Rajesh Banka

  • What are the integration points with sd and pm

    hi,
    sap gurus,
    good morning to all,
    what are the integration points SD and PLANT MAINTAINCE.
    REARDS,
    balaji.t
    09990019711

    Balji,
    There is no major integration b/w SD and PM.
    But PM is integrated with CS for all service and repair orders.,
    If you really want to see where they can be ssen integrated
    Eg:
    Pm deifines the roles for the people in shopfloor,if you can make use of these roles and give authorization of removal of credit block to them then it is integrated.
    Even when a new machine is purchased or repaired or overhauled the amount is passed to repective cost center internally.
    regards

  • Transaction code for checking the capacity of  a job

    Hi,
      Can anybody tell me if there is a transaction code for viewing the capacity of Job.
    Thanks and regards,
    Avinash.S

    Hi Avinash,
    I am not geeting what you want normally CM01 for w/c vise Load you can use.
    Pls elaborate yr problem a little bit.
    Umesh

  • [How-to] Find the middle point between sides of two distant objects.

    [In reference to my attachment]
    I would like to find the middle point between object A's right-most segment (in green) and object B's left-most segment (in blue), quickly, effectively and reliably.
    Ideally, there's a function i'm not familiar with that exists . I would rather not resort to having to create more objects to "figure out" the middle point manually, so-to speak.

    Dandreu,
    In a more general case than assumed in the first post, if you wish to have an actual key point, you may:
    1) Direct Select each of the path segments in question and Ctrl/Cmd+C+F+X+F,
    2) Select either and rotate it by 180 degrees,
    3) Object>Blend>Blend Options, with 1 Step, then Object>Blend>Make, then Object>Blend>Expand,
    4) Select the line in the middle and Object>Path>Add Anchor Point.
    You may also do a similar way where you add an Anchor Point at the middle of the segments and ClickDrag with the Line Segment Tool between them, but that is a bit destructive.

  • T-code to see the report generated by a Report Writer.

    Hi,
    I  am new to report writer and need your help.
    I have a output which is generated  through a report writer.
    I need to compare the code that generated this output in development and production systems.
    The only information I have is  the library name and a z report name which gives the output.(throgh t-code GR33)
    But when I try to execute the same report in Se 38, it says that te report does not exists .
    Please suggest what is the t-code to see the report generated by a report writer , so that I can compare the codes in different systems.
    Thanks,
    Suchi.

    Hi,
    Thanks for the replies.
    The actual issue is :
    I have  a report created by report writer in 2 languages in Chineese and in English.
    In the selection screen of the chineese report some of the labels are missing.
    It is getting printed as ####### instead of fiscal year , Period etc.
    This is happening only in production while in the development system it is correct (Both the chineese and the English selection screen ).
    I guess this is a transportation issue.
    Please suggest.
    I am ot able to see the Transport Requests associated with it .
    Can you please guide me for the same.
    Where can I see the TRs associated with this report.

  • I want the t code to see the against which service order payment was done ?

    i want the t code to see the against which service order payment was done ?

    you can use ME2S, but if not what you are looking for then ask ABAP to develop a customized report for service orders only for whom payment is done.
    regards,
    qsm sap

  • What is the transaction code to set the download directory?

    What is the transaction code to set the download directory?

    SO21 is the Maintain PC Work directory transaction
    Cheers,
    Ben

  • Like MMBE in R/3, is there any t.code to see the stock overview in SCM?

    Experts,
    Like MMBE in R/3, is there any t.code to see the stock overview in SCM?
    Thanks in advance
    Krish

    Please go to /SAPAPO/RRP3 and click on Stock tab. If you use GATP you can even get the details using /SAPAPO/AC03

Maybe you are looking for

  • J2SE 5.0 Source code

    Could someone please tell me when it's the source code for J2SE 5.0 going to be available under the Sun Community Source Licensing page: http://wwws.sun.com/software/communitysource/j2se/java2/download.html? Thanks

  • New Objects in OM

    Hi Xperts! Im looking information about two new objects of OM: - Job Family - Functional Area And what kind of links/ relations  this objects have? Thanks a lot!

  • What do i do if my IPod 4th Gen Is stolen?

    i was laying down in my car wating for my mother to come back from 7-eleven , Suddenly a man was approaching my car then he opened the door and just took my ipod away. WHAT DO I DO ?

  • Nokia Repair in UK

    Hi, anyone had any experinece of getting a Nokia repaired in UK ? My phone was not working properly so I filled out the online form on this site and posted it off to Thetford a week ago. I have no confirmation that it has been recieved nor recieved a

  • Uploading Flash Intro to play before home page in Dreamweaver

    I'm new to Flash CS3. I'm trying to figure out how to make my flash intro to my website play before it takes me to my home page in Dreamweaver. In other words, the flash intro plays and then automatically goes to my designated home page.The intro is