Transaction Codes for Report Painter Reports

Hi,
Can any bodu assist on how can we create a link for the report painter report and the transaction code for the same.
Also is there somthing to be taken care while getting the same transported to another client.
Thanks & Regards,
Ankur Goel

Hi,
Thanks for response.
Actually I created the Transaction code and get the Report and Transaction code transported but when i executed the transaction code in the Receiver Client i gave run time ABAP error.
let me give example:
a) I created the Library, Report Group & Report in my Developement Client.
b) Using SE93 i assigned the program name of the Report to transaction code.
c) Got the Library, Report Group, Report & T.code transported to Quality Client.
d) Executed the transaction code in QAS which gave me error.
Reason identified:
a) Let say Program name created for the report is AAXGHGYGBL010 in my client 010.
b) Transaction code ZREPORT01 created using SE93 for program AAXGHGYGBL010.
c) Now got the Library, Report Group, Report & T.code transported to Quality Client 050.
d) In client 050 program AAXGHGYGBL010 doesnot exist as AAXGHGYGBL050 has been created for the transported Report.
Thanks & Regards,
Ankur Goel

Similar Messages

How to get Transaction code for SAP standard report painter in FI

Hi All -
Please let me know, How to get the transaction code for Standard SAP report painter / report writer in FI module.
These report painters are created thru GR51...
Thanks,
Kannan

Please refer to [Creating Transaction Code For Report Painter Reports|http://www.google.com/url?sa=t&source=web&ct=res&cd=1&ved=0CAgQFjAA&url=http%3A%2F%2Fdap-consulting.com%2Fyahoo_site_admin%2Fassets%2Fdocs%2FReport_Painter_Reports.47142031.pdf&ei=MiWYS5ilCYeOlAfn4pCGDQ&usg=AFQjCNEZ0YO6vJ97K24MbU_NI5ROTb5vJA&sig2=Ke-svnqddqrz8RMcTuEnaw].

Transaction code for SAP query reports

Hi All,
I am trying to create transaction code for sap query report but couldn't go further.
1) Created User group in SQ03
2) Created infoset in SQ03 and assigned that to the user group
3) Created query in SQ01 using the infoset.
I executed the report in SQ01 and it is working fine.
Now I try to create a transaction code in SE93 using the steps mentioned in the following link:
Assign transaction code to SAP Query (created via SQ01)
But when try to execute the report using the transaction code, it is giving error message 'User group xxxxxx is not yet created'
Could any one advice me if I miss something? Or please help me to create this transaction code and transport to production?
Thanks in advance

HI,
based on the thread you've already mentioned:
In SE93, Create a Paramter Transaction
-> Transaction = Start_report
-> In default values, give the below details:
D_SREPOVARI-REPORTTYPE = AQ
D_SREPOVARI-EXTDREPORT = Name of the Query
D_SREPOVARI-REPORT = User Group
So check if the user group is typed correct in SE93 and check also if the user group exits in the system where you are trying to run the transaction.
best regards, Christian

Transaction Code for Cost Center Report

Hi everyone,
using report painter I have created a cost center report which is a copy of a standard report. Now I would like to create a transaction code for this report which can be run from the menu.
Can anyone explain step-by-step how to do this? I have already tried creating a TC for GR55 but this seems not to be what I want. I want the TC to start the report directly.
Thanks in advance for your help!
Regards,
Martin

Hi,
Go to SE93 (create a new transaction), choose 'Transaction with parameters'. In the Transaction field put 'START_REPORT' and tick 'Skip Initial screen' flag. Tick all flags for GUI support and in the parameters section (below) type four parameters:
D_SREPOVARI-REPORTTYPE = RW
D_SREPOVARI-REPORT = (library of reports)
D_SREPOVARI-VARIANT
D_SREPOVARI-NOSELSCRN
Regards,
Eli

How to create a Transaction code for a Report Painter Report

Hi All,
Can any one let me know the procedure as to how to create a t-code for a user defined PCA report. I have created a PCA report (copied the existing report (8a26-001) and named it as zpca and assigned the same in a new Report Group ZPCA (the group is created by copying 8a26 group) and assigned it under the library 8a2. We have added few fields required by the user to the Z report.
Now i need to create a transaction code for that zpca report. can anyone suggest how to go about it.
Useful answers will be appropirately rewarded.
regards,
radhika

Go to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
Name of screen field:                               Value
D_SREPOVARI-REPORTTYPE                RW
D_SREPOVARI-REPORT                        ZPCA
Save and transport accordingly.

Create T.Code for Report painter- report (GRR1)

Hi Experts,
I have created report in report painter( T.code - GRR1) using 1vk library, now i want to have a transaction code for my new report.
So, How can i create a T.code for customized report in GRR1.
Thanks
Raj

Dear Raj,
Hope this link will help you.
http://home4sap.com/Blog/2009/08/how-to-create-a-transaction-code-for-report-painter-reports/
Thanks and regards
Praveen.J

How to Create Transaction code for a Report

Hi Gurus,
I created some reports and I wants those reports
should be placed in the SAP Menu(initial screen) not
in the User menu in the form of Transaction codes.
I would really appreciate if any one can please send the process to create transaction codes for the User reports/Report groups in R/3 and how to add those created Transaction codes to the SAP MENU.
Thanks in Advance
Danial

Try to insert it into the main menu if you must change S000 (there is a function module for everything)? Perhaps SAP protects their menu trees from foreign subnodes in SE43?
Also note that for report transactions you do not need to give the user transaction code start_report. If you do, then they could enter it directly and potentially start many other reports too. The system will call start_report for submitting the report internally without authorizations for it required (unless start_report is maintained in SE97).
Regarding DE, this also confuses me sometimes and I noticed that it generally indicates that I am doing something which has an implication for a SAP standard object. Try either hitting the enter button to see what the next screen is, or, choose original language in the previous screen, or, logon in sy-langu = DE and (remember the path if you dont speak German) change it, or, follow JCs advice to create your own menu.

Assign Transaction Code for Report Painter generated program

I am trying to assign a transaction code for report painter generated program... I assigned the transaction code in Development for the generated program but the program name changes in every system and I get a runtime error...
Can you please guide me on how to handle this problem

http://dap-consulting.com/yahoo_site_admin/assets/docs/Report_Painter_Reports.47142031.pdf
Found my answer in the above link

Creating a transaction code for Report Painter

Hi all,
I made a report using Report Painter and I need to create a transaction code for the report. Is there a way to create it in Report Painter or I have to do it with transaction SE93?
Thanks is advance,
Susanna
Edited by: Susanna Gill on Sep 10, 2008 10:08 PM

Simple,
Go To Se93
Give the Ztcode and press create
select the last option (Transaction With parameters)
In the next screen give transaction as START_REPORT
Check the three GUI check boxes
In the default values below give the following
D_SREPOVARI-REPORTTYPE :RW
D_SREPOVARI-REPORT :(Your Report Group)
and you are done.

Transaction code for Custom report

Hi,
How to create transaction code for Custom report ?
the custom report is a drilldown report of COPA, which can seen in tcode FDI3.
then how to add this new transaction to the menu path Easy assess->FI->AR->Information system->Reports->customers:items.
Thanks,
Swetha

Hi Swetha,
There is a special way to assign tcodes to such reports. Normally you create the report via report painter/writer. These reports are part of library and report group.
Create the tcode in SE93. Then at the bottom of the screen you would find option to specify report group, report name, variant to lauch with. Don't have system to specify the exact way of specifying, if you need I can provide on monday. You can take some existing COPA standard report and check from SE93.
--Ram

Create a Transaction code for a Report

Hi
I have created a report through report painter. How can i create a transaction code for the report.
Thanks
J

Hi,
T.Code: SE93 - Maintain Transaction
Transaction Code = Zxxxxxx
Click on Create.
Short Text = Name of Report
Click on the radio button for 'Transaction with Parameters'
Press Enter.
Transaction = GR55
Parameters Window...
Screen Field : Screen field can be viewed in technical information screen of the report group to which report belongs for which t.code is to created.
Value: Report Group
Click on Save.
Now you have a custom transaction for the report(s) in a report group.
Hope this helps.
Please assign points to say thanks.

T.Code for Report painter report

Hi,
Is there a way to assign a T.Code to the Report painter report, so that users do not have to go to GR53.
thanks & Regards
Rose

thanks Eli, I tried this in Sandbox and it looks good.
You seem to know a lot about Report Painter, I hope you would be able to certainly help me understand this :
My predecessor here, created a report painter report and then asked the ABAP team to copy the report painter program (its like a query name) to a Z Prpgram and assign a transaction code. As I hear this was done to avoid the authorization issues.. (???) when this was moved to Testing Dev client, all this worked But when we moved this to QA, the error "program doesnot exist" made us to change the zprogram to remove the logic that the program had to check for the Client, in which the report was created. We removed that but then it then includes started giving the same error. so this will surely not work.
So, my question is : when this simple way of giving a report painter report a t.code with the defaults, would there be any auth issues that you can think of ???
thanks in advance.
Regards
Rose

Attaching a Transaction Code to Report Painter Report

Hi All
After creating a report painter report in GRR2 ... I tried to attach it to a transaction code in SE93...
But am not able to do so?
Is this possible and if so how is it done?
Thank you
Rukshana

I assume that you were copying the report/program from one environment to the next? DEV->QA->PRD
Using the Elias' example above, for program name, ensure that the last portion of it coincides with the environment in which you are executing the transaction code.
GP4FGHMLN5Z2Q5MDAN2A89TGV1K010.
Notice the '010'? Is that the client number for the environment in which you wish to run this program?
If your PRD environment is for example, client 100, then you will need to change the t-code to point appropriately to the program for that client. In this case (using my example), the program name to be referenced by the t-code would be:
GP4FGHMLN5Z2Q5MDAN2A89TGV1K100.
Try that out. If all else fails, if you have access to t-code SE38, search for your program name (except for the last portion, etc.) with a wildcard (*). If you find the program, run it to make sure that this is what you were expecting. Now that you have the correct program name, use that in SE93 for your t-code.

Create transaction code for CJE0 report

Dear friend:
Who's know how to create transaction code for CJE0 report.

Hi,
Alternatively, you can try adding anew entry to your menu area in development (SE43N), creating a subnode, selecting the report as your option and provide the information. Do not forget to give your own transaction name. I'm quite sure, that in this case (if you will transport this together with the report), it should work.
Regards,
Eli
P.S. I know that program names changes when it's about a writer/painter report. Is it really the same thing with CJE0 reports?

Transaction code for Depricitation Report

Hi,
we have asset accouting with WDV Method & maintaing our books as per F.Y. April to March
But, due to foreign investor's investment, we have need to closed our books, twicely, i.e. IFRS - F.Y.-Jan to Dec / ( US gap ) & Indian gap, FY. April to March.
Currently, We are using, AR03 trasaction to view the Depriciation Report (Asset Register)
My problem is, when we run the Deprication report for IFRS Books closing, we could't get report, properly, because of our F.Y. maintan April to March.
in that case we have need to maintain Manually on XLS.
Please tell me any transaction code for depriciation report for IFRS Books closing as well as Indian Gap.
Thanks
Regards
Jitendra

dont you have an option in there to run based on your depreciation area? Select your depreciation area and the report date based on your fiscal year variant. Optionally, you can also try reports like S_ALR_87012006 - Ordinary Depreciation, and S_P99_41000192 - Posted depreciation by asset and posting period with depreciation area selection.

Transaction Codes for Report Painter Reports

Similar Messages

Maybe you are looking for