Transaction codes for viewing the registers

hi,
sap gurus,
We have done the utilization for the month of FEB-08.How we can confirm the the registers are updated or not.
Please give the inputs.Urgent
regards,
balaji.t

Please check the following registers-
J2I5 - To extract
J2I6 - To See or Print
for the tables
PART 2: J_1IPART2
for seeing the Utilization entries in Part 2 at the table as follows -
Excise Group : Your Excise Group
Transaction Type: Blank
Execute: system gives the utilized values.

Similar Messages

  • Transaction code for checking the capacity of  a job

    Hi,
      Can anybody tell me if there is a transaction code for viewing the capacity of Job.
    Thanks and regards,
    Avinash.S

    Hi Avinash,
    I am not geeting what you want normally CM01 for w/c vise Load you can use.
    Pls elaborate yr problem a little bit.
    Umesh

  • Transaction code for viewing invoice document and Claims document

    Hi Experts,
    Can u please tell me the transaction codes for viewing invoice document and claims document in ECC.
    I am in CRM and i do not know about the ECC transaction codes.
    request you 2 help.
    Thanks and Regards
    Shilpi

    hi,
    MM flow:
    purchase Requestion (ME51)
    Request for Quatation (ME41)
    Quatation from different vendors (ME47)
    price comparision (ME49)
    purchase order send to vendors (ME22)
    goods reciepts (MIGO)
    logistic invoice verification (MIRO)
    SD flow:
    Enquirey (VA11)
    Quatation (VA21)
    sales order processing (VA01)
    delivery (VL01)
    billing (VF01)
    Also follow this link.
    The specified item was not found.
    i hope this will help you out
    -Thanks & regards
    Saurabh Goel

  • Transaction code for viewing Costing Sheet

    Hello Sap Gurus,
    I am a SAP user.Can you suggest me a Transaction code for viewing Costing Sheet.
    Regards,
    Pawan Kumar

    Dear Pawan Kumar,
    For checking the costing sheets related to product cost controlling use KZS2.
    For Costing sheets related to Internal orders use KALK.
    Regards
    Mangalraj.S
    Edited by: Mangalraj.S on Apr 20, 2009 3:06 PM

  • What is the T-code for Viewing the Payment Advices....

    Hi,
    What is the T-code for Viewing the Payment Advices....
    Regards
    Sap Guru

    Hi,
    Payment advice creation - FBE1
    Payment advice Change - FBE2
    Payment advice Display - FBE3
    Payment advice Delete - FBE6.
    Assign points if helpful.
    Thanks,
    Vasu..

  • Transaction Code for seeing the files in the  Application Server

    Hello All,
      Can anybody please give me the transaction code for seeing the files in the Application Server
    Thanks in Advance,
    Regards,
    LIJO.

    hi
    good
    try with tcode AL11.
    thanks
    mrutyun^

  • What is the transaction code for see the Web Services available in SAP

    Hi
    I came to know that SAP has provided its own webservices... I need some information on that... If any one has documentation on that can u please send it to me... My ID is <b>[email protected]</b>.
    What is the trasaction code for see the web services available in SAP.... Can any one help.. Please its  urgent
    Best Regards
    Ravi Shankar B
    Message was edited by:
            RaviShankar B

    Hi,
    you can find Web Services (Enterprise Services) in the Enterprise Services Workplace (ES Workplace). The ES Workplace allows you to explore, test, and use enterprise services to make enterprise SOA tangible. Here, you will find all of the currently productized enterprise services by SAP.
    Best Regards,
    Boris Mueller
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/esa/esapreview">ES Workplace at SDN</a>
    <a href="http://esapreview.sap.com:82/socoview(bD1kZSZjPTgwMCZkPW1pbg==)/flddisplay.asp">ES Workplace</a>

  • Transaction code for viewing billing details of a customer.

    Hi
    Do we have any tansaction code where we can view all the invoices related with a customer for a particular month.
    Please advise.
    Kind regards.
    Kate

    hi
    In R/3 VF05 will show list of all the invoices for the date chosen by the user entry
    This will show only list for a particular payer and material combination
    Regards
    N Ganesh

  • Transaction Code to VIEW the IDOC's in XI

    Hi Guys,
    I had configured the Partner Profile in R/3 and triggered the IDOC's to XI. I havent configured the scenario in IR or ID yet. Since i had triggered the IDOC's from R/3 and they show successful,which transaction should i use in XI to check whether the IDOC's had reached the XI system Succesfully or not.
    Thanks,
    KC.

    Hi Kittu
    Have a look at this blog, it has all TCodes.
    /people/morten.wittrock/blog/2006/03/23/getting-started-with-xi-part-1-xi-30-cheat-sheet
    Here it goes~
    SXMB_IFR-- launch integration builder/ Repository/configuration/SLD ( XI HomePage)
    Proxy Generation
    SPROXY--Proxy generation
    Monitering features:
    SXMB_MONI-- monitering of messages
    SXI_MONITOR - monitoring Processed Messages
    SXMB_MONI_BPE--Business process monitering
    Alerts:
    ALRTCATDEF- To configure Alert Category
    Adminsitration of XI
    sxmb_adm-- Administration
    QUEUE MONITORING
    SMQ1 Outbound queue
    SMQ2 Inbound Queue
    IDoc's& RFC's related
    IDX1- Port Configuration
    IDX2 - for IDoc meta data
    SM58--RFC error Log
    SM59 - RFC Destination
    IDX5 - Idoc Monitor
    Others
    SWELS---Event trace switching on and off.
    SXI_MAPPING_TEST To test mappings
    SXI_CACHE To check directory cache
    To get the cache information For Adapters- go to SXI_CACHE
    Hope this helps
    Thanks
    Abhishek

  • T.Code  for Viewing the details of characteristic in Production order

    Hi Gurus,
    During the production Order Stage , I want to see the MIC  and value that I have mentioned for the operation in the routing . I don't want to see from the routing.
    Is there any reports or option in the production order from  where, I can see the details of MIC and Values that I have used in the routing.
    What is table name where MIC values stores in the production order.
    Thanks in Advance.
    Srinivasan
    Edited by: srinivasan Lakshmanana on Jan 12, 2008 3:07 PM

    Hi Gurus,
    During the production Order Stage , I want to see the MIC and value that I have mentioned for the operation in the routing . I don't want to see from the routing.
    Is there any reports or option in the production order from where, I can see the details of MIC and Values that I have used in the routing.
    What is table name where MIC values stores in the production order.
    Thanks in Advance.
    Srinivasan

  • Transaction code to view process orders set for deletion

    Hi PP Gurus
    We are trying to search for transaction code to view the process orders which have status as DLFL i.e deletion flag  set for the orders. In cooispi, the deleted orders are not shown in the report output.
    I request you to let me know if there is any other code through which we can view deleted process orders.
    Thanks & Regards
    Harleen Kaur

    Dear,
    In COOISPI  put DLT in system status field and execute the report this will give you the list of all order with deletion flags
    Also refer this thread,
    COOIS Report for Production orders with status DLFL
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on May 6, 2009 11:16 AM

  • Required the transaction code for the user exit

    Hi Abap Gurus,
            i want to find out the *sap transaction code for which the user exit belongs to  from the below code i am getting the enhancement name and the type.
    i want to know the transaction code for exit EXIT_SAPLMEKO_002 and  EXIT_SAPLFYTX_USER_001
    data: begin of it_modsap occurs 0,
            name   type modsap-name,
            typ    type modsap-typ,
            member type modsap-member,
          end of it_modsap.
    type-pools:slis.
    data:wa_layout type slis_layout_alv.
    data:it_sort   type slis_t_sortinfo_alv.
    data:wa_sort   like line of it_sort.
    parameters:p_exit type modsap-member.
    select * from modsap into table it_modsap where member = p_exit.
    read table it_modsap index 1.
    select * from modsap into table it_modsap where name = it_modsap-name.
    wa_layout-colwidth_optimize = 'X'.
    wa_sort-fieldname = 'NAME'.
    wa_sort-tabname   = 'IT_MODSAP'.
    wa_sort-up        = 'X'.
    append wa_sort to it_sort.
    clear  wa_sort.
    call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
        i_callback_program = sy-repid
        i_structure_name   = 'MODSAP'
        is_layout          = wa_layout
        it_sort            = it_sort
      tables
        t_outtab           = it_modsap.

    HI
    The user exit EXIT_SAPLFYTX_USER_001 is trigered for the below transactions and also postings via IDOC.
    'ME21' 'ME21N' 'ME22' 'ME22N' 'ME23'  'ME23N' 'ME31L'  'ME31'   'ME32L' 'ME32'  'ME33L'  'ME33' 'ME38'   'ME39'  'VL31N'  'VL32N' 'VL33N'.
    This is basically used for tax calculation purposes.
    The user exit EXIT_SAPLMEKO_002 is trigerred for multiple transactions of purchansing scenario.
    Also use user exit for your business scenario.
    Br
    Vijay V

  • T.codes to view the list of persons that are assigned to "activity"

    Hi Guru's
    Are there any transaction codes to view the list of persons that are assigned to u201Cactivity - personal assignment tabu201D in the project?
    Regards,
    Bha

    the same you can view from CJ20n , by clicking perticular activity--> click on person assignment tab.
    This can be true for all the netwrok maintenance txn.
    Regards
    Nitin

  • SAP Trans.Code-To view the all expenses received from the company.

    Is there any SAP transaction code,to view the all expenses received from the company?For an example,I have received conveyance,medical,LTA etc.on vouchers.Now,I want to see the received on which date I have taken.
    Regards

    I guess this information you will get in following reports ( put appropriate cost center )
    Transaction Codes KSB1, KSB2, KSBP, KSB5
    Also check Accounting-> controllong-> Cost center accounting-> Info system-> Reports for cost center accounting-> line items/more reports.

  • SAP Trans.Code-To view the previous month's OSP Report

    Pl.mention the SAP trans.code for view the OSP status as on previous month.For an example,I want to see the status of OSP stocks as on 30.11.2010.How can I see?From MBLB,we can see the current OSP stock status.Is there any trans.Code for view the previous month OSP stock status?
    Regards

    hi,
        there is no t code specific to your requirement, but you can get the details through MB51, by metioning repective date and movement types like 541,543 etc..
         hope this will help..
    Regards
    Manohar

Maybe you are looking for