Transaction CRM_MKTPL and Profile
Hi,
In transaction CRM_MKTPL - Marketing Planner I need to set by default the field Profile (CRM_JSTO-STSMA).
I'm trying to use the method MODIFY_FIELD_ATTR in the badi CRM_MKTPL.
But.... i'm a bit confused.
Has someone already done this kind of thing? Can someone help me understand a bit more this method on this BADI?
Thanks a lot.
BR
Hi,
Arjun Pawar. Can you show me an example how did you used the BADI CRM_MKTPL to defaulting the value of status profile please???
Is really what i need.
Thanks in advance
BR
Similar Messages
-
BADI CRM_MKTPL and Status Change button! (Hide the standard system status)
Hello,
In transaction CRM_MKTPL, i need to delete some status that appears when i click on button Change status.
I am trying to use the BADI: CRM_MKTPL using the method 'GET_DROPDOWNBOX_VALUE', but i didn't get what i
want because this method is only valid (i think) for Listboxes for a field and not for a button, that is my
requirement.
Also i am trying to use the method 'p_fill_dropdown_listbox', but i don't know how to use this, and where, in
whick part of the BADI CRM_MKTPL.
I want to hide the standard system status in the dropdown list.
Any ideas?
Thanks in advance
Best regards
Message was edited by:
yukimai maiojust check in your badi there is any option is there for menu area customization or not in the implementation you can find attribute,interface ,subscreen like tab there check any menu area tab is there or not.. if it is not there then try for any menu exit and lastly you can try for transaction variant tcode SHD0.
regards
shiba dutta -
Skills Profile and Profile Matchup - Manager Notification
In the Skills Profile and Profile Matchup (service EMPLOYEE_SKILLSENHPROFILE_SERVICE_13) when an employee updates one of their skills there is a message written to the screen that "Your manager will then be notified of the changes.". I do not see any notification being created or a standard workflow for this. What needs to be done to 'activate' these notifications?
Hi Leah
In order to realise this requirement you need set up workflow
For Skills you should use workflow WS1200124 - I believe this
is provided by application componenent CA-GTF-QR
The function module, which creates the event is
HR_EVENT_WF_SUBPROFILE_DEFICIT.
This should be defined in table T779W
as follows
Q 1001 B032 INS PDSP 000 BUS7030 HR_EVENT_WF_SUBPROFILE_DEFICIT
Workflow is activated in transaction PFWS
It should also be mentioned that the standard workflow defaults
to the inbox of the employee- additionally
the workflow needs to be customized as follows to select manager -->
Copy WS to your namespace
The agent for step 0004 Display HR Development Subprofile would have to
be changed from Expression 'Employee' to 'Superior of workflow
initiator (rule) in the workflow builder for this template.
Afterwards it is necessary to activate the event triggering in your
workflow template and deactivate it in delivered template WS01200124.
The whole steps are
Copy workflow
Deactivate even triggering in delivered template
Change Step 004 expression
Save and Activate
Test in ECC
Test in Portal
Alternatively please consider removing text either via Personalization or
NWDI - if you do not wish workflow
Best wishes
Stuart -
Disabling authorizations checks for transactions SU53 and/or SU56.
Greetings.
I seem to remember reading that there was either a system profile parameter or a table entry that can be used to disable all authorizations checks for transactions SU53 and/or SU56.
Any truth in this or is my mind playing tricks on me?Hi,
I guess theres is profile param auth/tcodes_not_checked(I guess thats right), this will exclude SU53/SU56 from checks on transaction code.
This can be done using RZ10 and need to restart the system.
Rakesh -
Dear Experts,
I need to create a new customised role eg,Z_func and a profile z_func_prf.
To these i need to assign auhtorisations to tcode
Solar01 and Solar02.
This role again i need to assign to a user zuser1.
Im new to basis.
Kindly help.
Thanks and RegardsDear Swarna,
1. Go to PFCG transaction.
2. Type in the name of role which you want and then select create role
3. In the menu tab select transactions button and add mentioned transactions there.
4. then go to authorizations tab, they click on button change authorization and then maintain the required values for those transactions.
5. click on generate button then it will prompt to enter name for profile give the profile name
6. then come out of it and select user comparison tab and add the user to whom you want to add this role(if user doesn't exist go to su01 transaction and crete user and then assign newly created role to user in roles tab)
Hope this helps,
Thanks,
Rakesh.T -
Developing security Roles and profiles
Hi Team,
Can you guys let me know how to develop security roles and profiles. We are rolling out for a company in Japan, and the congif is completed. We are in the process of developing test cases ans also security roles and profiles for users? Can somebody guide and help me on this?
Regards,Hi,
Use Tcode = PFCG -->then create any customized roles and profiles for any users on module based.
user masters: USR01 to 09, UST04,
profiles: USR10, USR11, UST10S, UST10C,
authorisations: USR12, USR13, UST12.
password exceptions USR40.
History tables(may not be applicable but FYI): users: USH02, USH04,
profiles: USH10, auths USH12.
R/3 Security Tcodes
End User Transaction Code Menu Path Purpose
SU3 System > User Profile> Own Data Set address/defaults/parameters
SU53 System > Utilities > Display Authorization Check Display last authority check that failed
SU56 Tools --> Administration --> Monitor --> User Buffer Display user buffer
Role Administration Transaction Code Menu Path Purpose
PFCG
Tools --> Administration --> User Maintenance --> Roles Maintain roles using the Profile Generator
PFUD Work on SAP check indicators and field values
Select: Copy SAP check IDu2019s and field values
Installation
1. Initial Customer Tables Fill
Upgrade
2a. Preparation: Compare with SAP values
2b. Reconcile affected transactions
2c. Roles to be checked
2d. Display changed transaction codes
SU24
Same as for SU25:
Select: Change Check Indicators > Maintain Check Indicators>Maintain
Regards,
Srini Nookala -
Receivables: Diferrence between "transaction number" and "document number"
Hi!
What is the difference between "transaction number" and "document number" as shown in the transactions window?
Where are they used?
thanks!Transaction number is the Invoice number. It can be a manually entered number in case of manual invoices. Even in case of imported invoices, it can be a manually assigned number if the trx_number field is populated in the ra_interface_lines_all table. If you Invoice batch source setup indicates automatic transaction numbering, the transaction (invoice) number will be automatically generated sequentially. The starting number is mentioned in the Trx batch source.
The document number is a number which is generated by Document sequencing. To have the document number generated, you have to do few Doc sequencing setups like setting the 'Sequencial Numbering' profile options, creating document sequences and assigning the sequence to the Categories. The trx types are created as categories.
The Transaction number can be the same as the document number if you enable the option 'Copy Document number to Transaction number' in the Invoice batch source.
Hope that helps.
Thanks,
Anil -
what is role and profile in SAP?
how we can diffferentiate both?Hi Swati,
Role refers to the collection of associated activities (privilages) such as transactions, reports and so on. There are 2 types of Roles, Standard Role and Derived Role. While profile is a set of authorizations that are valid for the transactions defined in that role. Roles contain no actual access. They contain a role menu composed of transaction codes. These transaction codes are then mapped into the profile automatically by profile generator. When a role is generated (once created) the profiles are created automatically by profile generator. Every transaction code is different and may require different numbers of accompanying authorization objects to execute. A single profile can only contain 150 authorizations. Once that number is exceeded the profile generator will automatically create a second profile, sorted alphabetically by object name.
Please refer the below links:
The specified item was not found.
Re: difference between profile and role
Difference between Role & Profile
Regards,
Sreedhar -
How to find my 'role' and 'profile'?
When i log into a client as a user, Is there a way for me to find out what my 'role' and 'profile' are? I can't run su01d.
Edited by: Concoran Fernandez on May 18, 2008 5:28 AMHi,
No there is no such transaction as far as i know,But you can change your own user data in 'SU3'.
If your requirement is that you want to see whicch authorization you are missing then use the tcode SU53.It will show you the missing authorization.Then use suim to find out which role or tcode has that authorization so that u can assign the todes and auth using 'SU01' or 'PFCG'.
Regards,
Vamshi. -
Difference between transactions RZ10 and RZ11
Can you please tell me the difference between transactions RZ10 and RZ11
Hello Eechaneri,
RZ10 is for profile as well as profile parameter maintainance while RZ11 is for profile parameter display/change.
In RZ11 however you can change only those profile parameters which are dynamic i.e dont need a restart for change. For the ones where restart is needed the value needs to be added/changed in RZ10.
Regards.
Ruchit. -
Difference between role and profile
Hi All,
I need to know the difference between role and profile. Kindly let me also know
relevant T codes. Can Profiles exist without roles? If yes please let me know how to create them.
Thanks in Advance,
KalyanKalyan,
A role is basically a container of authorizations and other related items.
A profile contains the actual authorizations once a role is generated. In addition a profile can be created from scratch using the classical method--transaction SU02. Roles are created via transaction PFCG.
Also take a look at the following threads:
Difference between Role & Profile
Re: difference between profile and role
Cheers,
Ben -
There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report
When run as a batch program, (currently this is the case), or withT-Code ZJPVCS303 the selection screen is unchanged (except for additional sales area above)
- When run as T-Code ZJPVCS303_UL (UL stands for Upload) the selection screen is changed. The unix file option is no longer available, and the user is able to upload a local file (in the same format as the current unix file, but tab delimited) to the program for processing.
Requirements:
There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report.
->When ZJPVCS303 Transaction is executed, the file is uploaded from the Application
server to SAP R/3. The selection screen parameters would be:
Logical Filename:
Sales Organization:
Distribution Channel:
Division:
->When ZJPVCS303_US Transaction is executed, the file is uploaded from the Presentation Server
to SAP R/3. When this transaction is executed, it should not have the 'Logical
Filename' parameter anymore on the selection-screen. Instead it should only have
Local File name on the presentation server:
Sales Organization:
Distribution Channel:
Division:
The same thing is applicable for the other transaction ZJPVCS303. When transaction ZJPVCS303
is executed, it should not have the 'Local Filename' parameter anymore on the selection-screen. Instead it should only have
Logical Filename:
Sales Organization:
Distribution Channel:
Division:
So how should I make these parameters invisible depending on the transaction codes execution.
I have an idea of using MODIF ID, LOOPING AT SCREEN...MODIFY SCREEN.
I have an idea of using SY-TCODE.
EX:
AT SELECTION-SCREEN OUTPUT.
IF SY-TCODE = 'ZJPVCS303'.
LOOP AT SCREEN.
IF SCREEN-GROUPID = 'GRP'.
SCREEN-INPUT = 0.
SCREEN-INVISIBLE = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF SY-TCODE = 'ZJPVCS303_US'.
LOOP AT SCREEN.
IF .....
ENDLOOP.
ENDIF.
ENDIF.
But I am not able to get the output which I require. Please help me out.Hello Rani
Basically the transaction determines whether upload starts from application server (AS) or presentation server (PC). Thus, you will have the following parameter:
PARAMETERS:
p_as_fil TYPE filename MODIF ID unx, " e.g. Unix server
p_pc_fil TYPE filename MODIF ID wnd. " e.g. Windows PC
AT SELECTION-SCREEN OUTPUT.
CASE syst-tcode.
* transaction(s) for upload from server (AS)
WHEN 'ZJPVCS303.
LOOP AT screen.
IF ( screen-group1 = 'UNX' ).
screen-input = 0.
screen-invisible = 1.
MODIFY screen.
ENDIF.
ENDLOOP.
* transaction(s) for upload from local PC (PC)
WHEN 'ZJPVCS303_US.
LOOP AT screen.
IF ( screen-group1 = 'WND' ).
screen-input = 0.
screen-invisible = 1.
MODIFY screen.
ENDIF.
ENDLOOP.
WHEN others.
ENDCASE.
Regards
Uwe -
What is the diff b/w transactional cube and std cube
What is the diff b/w transactional cube and std cube
Hi Main differences,
1) Trasactional infocube are optimized for writing data that is multiple user can simultaneously write data into it without much effect on the performance where as the std infocube are optimized to read the data ie.e through queries.
2) transactional inofcubes can be loaded through SEM process as well normal laoding process.Std can be loaded only thorugh normal loading process.
3) the way data is stored is same but the indexing and partionong aspects are different since one is optimized for writing and another one for reading.
Thanks
Message was edited by:
Ajeet Singh -
I have moved to uk from ireland and bought new iphone, set up using my existing Apple ID account and profile but won't let me buy install or update apps??
Can anyone advise me on what I need to do?
My existing account is linked to ireland as my bank account details are there, does this make a difference?
Please help!Until you get a UK bank account and credit card, buy and redeem UK iTunes gift cards for use in the iTunes and Mac App Stores. But you need to switch your region/country to the UK store in your account information, as you can't use UK iTunes gift cards in the Irish stores, the gift cards are country specific.
-
Monitoring of remote system's Transactional RFC and Queued RFC
Hello,
In our production system, in rz20- CCMS monitor templates- Communication-Transactional RFC and Queued RFc- outbound queues- Queues otherwise not monitored we can see blocked queues for each client.
System is connected to solution manager and we wish the central auto reaction is implemented in solution manager
However i am unable to find Transactional RFC and Queued RFC for the remote system, they exist only for solution manager itself
Tell me how can i do the central monitoringHello,
First you need to check with your Landscape in solman in order to monitor any kind of activities to do so pls follow these steps.
Go to SMSY in solman under Landscape components>Product systemsselect you satellite system example SAP ECC.
On the main screen you will find client for which you have generated RFC connection. Please check though connection are working fine, Go to edit mode and try to click on generate button there will be a pop-up, which gives a clear picture of RFC connection which already exists, and you can also re-generate this RFC connection by clean it up when you re-generate pls select under Actions after generation assign RFC dest for system monitoring.
But make sure there is no project impact on this RFC, like they are not using any logical components and already have some projects running on this RFC connection.
I would advise you to first you the option of assign and check RFC button which is next to generate icon.
Regards
JUDE
Maybe you are looking for
-
I tried to use backup info in so many different areas....and I CAN NOT GET THE RIGHT PASSWORD. I NEED TO OVERRIDE ICLOUD TO DELETE THE ACCOUNT IM LOGGED INTO. I want to sign in using an account I recently remembered all information for. SOMEONE HELP.
-
Safari keeps quiting unexpectedly using eia plugin
This problem just started happening today. Can someone give me some insight as to why this is happening and what i can do to fix it! thanks
-
Why doesn't my imac turn on when I turn on Apple TV?
Why doesn't my imac turn on when I turn on Apple TV?
-
Ipod nano is corrupted.
the first time i plug it into my computer it says i need to format it to be used with windows, so i do that. Afterwards i get an error message saying i need to format my pod because it is corrupt, and i keep getting that no matter how many times i fo
-
Hi, I want to use the SAP XML Toolkit to implement a Java Mapping. Where can I find this tool? From which URL can I download the tool? Thanks to all!