TRANSACTION CT04

Hi Guys,
        if u go to transaction CT04 then to the values tab,
below the table conntrol u will find a pushbotton for "documentation for value".
This is used to write any long text for the values assigned in the table control.
Now if u go to GOTO(in the menu)--the header you will see a field TEXT NAME with a numeric value.
Can any one tell me what this value is. Please do not press F1 and tell RSTXT-TDNAME. I want ot know from where this value is coming and where is it stored,
Please  reply urgently.

I'm having the same problem...
Table TTXID is not a solution, as it only tells me that the TOBJECT = FEATURE and TDID = VALUE, it does not help in finding the number in the filed text name.
Thanks

Similar Messages

  • Data Upload Using CATT for transaction CT04

    Hi,
      I am doing a data upload for the transaction ct04.I  have uploaded the  characteristics and characteristics value and description.Now i need to add the documentation for each and every characteristics values.
    I created a recording using CATT and when i try to execute it ,the editor screen does not get displayed when i execute in foreground mode and it goes for a short dump.
    Any help in this regard is highly appreciated.
    Thanks and regards,
    Venkatalakshmi

    Hi,
    Got this material from a group
    check it out
    http://www.sapsuperusers.com/ABAPKC/TESTINGTOOLS/ECATT.pdf
    Thanks & Regards,
    Judith.

  • Transaction CT04 not supported using LSMW

    Dear All,
    I have created a LSMW to update characteristics using a transaction CT04. Basically, I need to change the field "Entry Required" to "disabled".
    The problem occur when I want to "Create Batch Input Session".
    The error message is: "Transaction CT04 not supported"
    Could anyone please help me on this.

    you can use below  LSMW bapi method
    Business Object      BUS1088      Characteristic
    Method               CREATE                      Create
    Message Type         CHARACTERISTIC_CREATE       BAPI characteristics: Cre
    Basic Type           CHARACTERISTIC_CREATE01     BAPI for Characteristics

  • Addition of config keys for transaction CT04

    For transaction code CT04 for a material for which i have output types ZCRE and ZCHG
    under variant config we have configuration value and configuration description. i would
    like to add additional config keys like configuration key part3 and configuration key part 4
    configuration key part5 and configuration key part6 to the existing
    configuration key part 1  and configuration key part2.
    How can i create additional configuration keys and how do i group them.

    Hi!
    CT04 is for maintaining characteristics. What configuration keys are you talking about exactly?
    Any relevant transactions can be found at the following SAP menu path:
    Logistics - Central functions - Classification
    Regards
    Tamá

  • Performance Issue while changing a characteristic using CT04 transaction

    Hi Experts,
    Just now we have upgraded our system from 4.6C to ECC 6.0. In the new system we have created some characteristics and later I am trying to change these characteristics using transaction CT04 .
    There are some characteristics which are already present in the new system which has come from 4.6 C. Now when I try to open/change these characteristic (already existing) using CT04 it does not take any time where as if I try to open/change a characteristic which is created newly in ECC 6.0, then it takes a lot of time.
    When I run SQL trace for both the scenario, then I find that most of the time taken is on Query on table PLFV.
    Trace Result for Newly Created Characteristic :
    115 PLFV PREPARE 0 SELECT WHERE "MANDT" = :A0 AND "ATINN"
    = :A1 AND "LOEKZ" = :A2 AND ROWNUM <= :A3
    3 PLFV OPEN 0 SELECT WHERE "MANDT" = '070' AND "ATINN" =
    0000000575 AND "LOEKZ" = ' ' AND ROWNUM <= 1
    336681733 PLFV FETCH 0 1403
    For this time taken is 336681733 .
    Trace Result for Existing Characteristic :
    2 PLFV OPEN 0 SELECT WHERE "MANDT" = '070' AND "
    ATINN" = 0000000575 AND "LOEKZ" = ' ' AND ROWNUM <= 1
    For this time taken is 2.
    Here one difference I see is that for the Newly created characteristic, Prepare, Open and Fetch part is executed where as for the already existing query only Open is executed.
    The program which is used for querying PLFV is SAPLCMX_TOOLS_CHARACTERISTICS.
    Could you please help me in this.
    Your response is highly appreciated.
    Regards,
    Lalit Kabra

    Hi Rob,
    Thanks for the response. But the problem which I mentioned is not with all the characteristics. It occurs only with those characteristics which are newly created. The characteristics which are already created are opened without any delay.
    So I am bit confused whether for this problem there would be be any note though I tried searching the same as well.
    Please respond if some one has clue about this issue.
    Your response is highly appreciated.
    Regards,
    Lalit Kabra

  • Performance Issue while changing Characteristics from CT04

    Hi Experts,
    Just now we have upgraded our system from 4.6C to ECC 6.0. In the new system we have created some characteristics and later I am trying to change these characteristics using transaction CT04 .
    There are some characteristics which are already present in the new system which has come from 4.6 C. Now when I try to open/change these characteristic (already existing) using CT04 it does not take any time where as if  I try to open/change a characteristic which is created newly in ECC 6.0, then it takes a lot of time.
    When I run SQL trace for both the scenario, then I find that most of the time taken is on Query on table PLFV.
    Trace Result for Newly Created Characteristic :
    115 PLFV       PREPARE      0     SELECT WHERE "MANDT" = :A0 AND "ATINN"
          = :A1 AND "LOEKZ" = :A2 AND ROWNUM <= :A3
    3 PLFV       OPEN                 0   SELECT WHERE "MANDT" = '070' AND "ATINN" =
       0000000575 AND "LOEKZ" = ' ' AND ROWNUM <= 1*
    336681733 PLFV       FETCH       0   1403        
    For this time taken is 336681733 .
    Trace Result for Existing Characteristic :
    2    PLFV       OPEN               0           SELECT WHERE "MANDT" = '070' AND "
                                                                  ATINN" = 0000000575 AND "LOEKZ" = ' ' AND ROWNUM <= 1
    For this time taken is 2.
    Here one difference I see is that for the Newly created characteristic, Prepare, Open and Fetch part is executed where as for the already existing query only Open is executed.
    The program which is used for querying PLFV is  SAPLCMX_TOOLS_CHARACTERISTICS.
    Could you please help me in this.
    Your response is highly appreciated.
    Regards,
    Lalit Kabra

    hi Rajesh,
    Pls check the below comments
    Please install the Oracle optimizer patch 6740811 and 6455795 as per
    note 871096. Also ensure you have installed the other patches listed in
    the same note as these are mandatory when running on Oracle 10.2
    If this does not solve your problem open an OSS message for this.
    Regards,
    Lalit

  • Create content modell, logical/physical document class, TA CT04/cl02/dc10

    Dear experts,
    Im about to get to know the SAP DMS. Content Server is already running working as well as the content repositories. I now wanna set up a content modell for testing with knowledge provider.
    Im a bit confused about the different ways of doing that. What is actually the difference between creating a CHAR in TA ct04, creating a class in Cl02 with type 017 and the alternative of creating a content model with TA SRMCMCREATE or directly in the document modelling workbench.
    Once ive hopefully understood the difference how can i start actually creating / uploading real (physical documents) cause in dont understand what TAs cvn01n/02n/03n are for.
    There is a large number of function modules for kpro. Fo example when testing SDOK_LOIOS_CREATE i have to enter an RFC destination. What do i have to type in as RFC destination intending to store in content repositories of content server?
    I know thats more than one question at a time but i would be very pleased some of these get answered.
    Thanks a lot in advance.

    Dear Christian,
    I would like to start providing you information with CT04 question. Here the CHAR value is used for maintaining the type of classification characteristics. The CHAR entry stands for 'Character' type which
    means you can add alphabetical and numerical values to this classification characteristic. Transaction CT04 is normally used for creating classification characteristics. In CL02 you can create a class for
    classification and then add the characteristics to it. In the standard class type 017 is used for classifying document info records.
    Transaction CV01N/CV02N/CV03N are used in standard for document managment functionalities. Here you can create/edit/display your document info records. These document info records are like a frame for your original files which could be added to an info record and then checked into your Content Server.
    During this check in function the KPRO function modules are used too.
    For further information I would recommend you to see the SAP online documentation under http://help.sap.com.
    Best regards,
    Christoph

  • CT04 BDC not showing tabstrip in SHDB

    hi all
    can anyone comment why does transaction: CT04 not show the tabs (subscreen) when recording via SHDB.
    I am using ECC 6.0, can create / change characteristics in the usual manner using the transaction CT04, however, while attempting to record via SHDB, the portion(tabstrip/subscreen) of the transaction is not seen.
    Why does this happen & Is there a way to work around ?
    Kindly suggest.

    Hi
    Check this
    Bapi's to change the characteristics of material.
    Regards
    Pavan

  • Batch create characteristics(ct04)

    HI all,
    I need to create batch characteristics from transaction ct04.
    i have tried bapi_character_create but i am unable to create with it.
    tried BDC when i try to recording can't see the Value tabs in it.
    please give some suggestions, how can i do this.
    if anyone have done this before, please forward sampel code to my email address
    [email protected]

    Hi,
    In CT04 the Single & Multiple values means.
    For Example in characeteristics if you want to maintain only one reading for characteristics then select the Single value,If you want more than one value for the Characteristics then select Multiple values.
    For Example say your characteristics is Speed.you are assign this characteristics to class Motor.
    When you attach this class to Equipment say if only one value exist for Speed characteristics for all equipment then specify single value.or if more than one value then specify as Multiple alue.
    for Motor A the Value of Speed characteristics is 1500 Rpm
    for Motor B the Value of Speed characteristics is 1500 Rpm
    for Motor C the Value of Speed characteristics is 1500 Rpm
    In this case assign as Single value.
    If for Motor A the Value of Speed characteristics is 1500 Rpm
    for Motor B the Value of Speed characteristics is 1200 Rpm
    for Motor C the Value of Speed characteristics is 1100 Rpm
    In this case specify as Multiple value & Maintain in characteristic when you cretae the value in Equipment the 3 option will show to you.from that you can select.
    For the 4 digit entry & template.
    Check your User profile what template it has given.check with Basis Consultant & ask him to assign the proper user profile to user id.
    In menu bar go to System -- User profile-- Own data & check the Default values tab.Check for the template there.
    Regards,
    Raj

  • Transport of Characteristics management  - CT04 and CL02

    Hello,
    I wonder if you like to carry all environments and characteristics of the classes created by material transactions CT04 and CL02, perform all the settings in the environment of testing and must pass to the productive environment, it is possible to transport? Or have to repeat all the configuration in other environments?
    Thanks.

    Hi
    Maintainenace of Charcteristics and classes is not a configuration, it is a master data.
    Some of the master data can be transported like tax codes.
    But we cannot transport classes and Characteristics. You need to replicate all the relevant data in production.
    If you have a lot of data then prepare data migration tolls like LSMW, BDC and BAPI's
    Thanks & Regards
    Kishore

  • Bdc for ct04

    Hello Friends,
    Im not able to record transaction code CT04, is there any other way to do it?
    Secondly how to delete the last updated value bcoz each time i run transaction ct04 the characteristic field contains last updated value, is there any customizing settings?
    Regards,
    Sunny

    U just woke up from a long dream?? You are closing so many threads..
    and Please make sure when you close a thread....you mention the solution..so that in future it will be helpful for others who search for the same issue.

  • Mass Upload of object dependency for characteristics value

    Hi ,
      I need to upload the object dependency for characteristics values through transaction CT04. My input data consists of characteristcs name , characteristics value and the object dependency (KNNAM) . Need to populate the KNNAM field alone .
    Have tried with the FM 'CTMV_CHARACT_CHANGE_KNOWL_VAL' which suits my requirement but teh dependencies are not getting uploaded . Am I missing anything ? Since I do not have class details i.e class num and class type I am not able to use  the BAPI like 'BAPI_CLASS_CHARVALUE_LOCAL_DEP ' . Please suggest any othe r suitable method .
    Thanks in advance.
    Sanjeev

    Hi,
    Please check the below link..
    BAPI for Characteristic Dependency
    Thanks.

  • VK15 BDC issues

    Hi,
    In VK15, I am uploading Condition record through BDC,
    where Its only updating the 14 line items,If its excedding more than 14 lines I am getting error...
    How to upload all excel data at a time ..
    Can anybody suggest me ...with simple example coding
    Thanks
    Kumar

    hi kumar,
    try the below sample code for data upload ,with your transaction.
    TYPES: BEGIN OF T_CDATA,
            ATKLA LIKE CABN-ATKLA,
            ATNAM LIKE CABN-ATNAM,
            ATFOR LIKE CABN-ATFOR,
           END OF T_CDATA.
    TYPES: BEGIN OF T_CCHAR,
             ATWRT(30),
             ATWTB(30),
           END OF T_CCHAR.
    DATA: IT_CDATA TYPE STANDARD TABLE OF T_CDATA,
          IT_CCHAR TYPE STANDARD TABLE OF T_CCHAR,
          IT_BDC TYPE STANDARD TABLE OF BDCDATA WITH HEADER LINE.
    DATA: WA_CDATA TYPE T_CDATA,
          WA_BDC TYPE BDCDATA,
          WA_CCHAR TYPE T_CCHAR.
    PARAMETERS: P_ATKLA     LIKE CABN-ATKLA OBLIGATORY,
                P_FNAME  LIKE RLGRAP-FILENAME OBLIGATORY.
    CONSTANTS: C_TCODE LIKE TSTC-TCODE VALUE 'CT04'.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
      PERFORM f_get_f4_help USING p_fname.
    START-OF-SELECTION.
    SELECT ATKLA ATNAM ATFOR INTO  TABLE IT_CDATA
                              FROM  CABN
                              WHERE ATKLA = P_ATKLA.
    IF NOT IT_CDATA[] IS INITIAL.
       PERFORM UPLOAD_DATA.
      PERFORM BDC_OPEN_GROUP.
       LOOP AT IT_CDATA INTO WA_CDATA.
        REFRESH: IT_BDC.
        PERFORM BDC_UPLOAD_DATA.
        PERFORM BDC_CALL_TRANS.
       PERFORM BDC_UPLOAD.
        CLEAR WA_CDATA.
       ENDLOOP.
    PERFORM BDC_CLOSE_GROUP.
    ENDIF.
    *&      Form  UPLOAD_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM UPLOAD_DATA .
    UPLOAD DATA USING GUI_UPLOAD
    DATA: l_v_filename TYPE string.
    CONSTANTS: l_c_asc TYPE filetype VALUE 'ASC',
               l_c_x   TYPE char1 VALUE 'X'.
    l_v_filename = p_fname.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
       FILENAME                      = l_v_filename
       FILETYPE                      = l_c_asc
       HAS_FIELD_SEPARATOR           = l_c_x
      HEADER_LENGTH                 = 0
      READ_BY_LINE                  = 'X'
      DAT_MODE                      = ' '
      CODEPAGE                      = ' '
      IGNORE_CERR                   = ABAP_TRUE
       REPLACEMENT                   = ','
      CHECK_BOM                     = ' '
    IMPORTING
      FILELENGTH                    =
      HEADER                        =
      TABLES
        DATA_TAB                      = IT_CCHAR
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " UPLOAD_DATA
    *&      Form  BDC_OPEN_GROUP
          text
    -->  p1        text
    <--  p2        text
    FORM BDC_OPEN_GROUP .
    OPEN GROUP
    CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
       CLIENT                    = SY-MANDT
      DEST                      = FILLER8
        GROUP                     = 'ZCHARU'
      HOLDDATE                  = FILLER8
       KEEP                      = 'X'
       USER                      = SY-UNAME
      RECORD                    = FILLER1
       PROG                      = SY-CPROG
    IMPORTING
      QID                       =
    EXCEPTIONS
       CLIENT_INVALID            = 1
       DESTINATION_INVALID       = 2
       GROUP_INVALID             = 3
       GROUP_IS_LOCKED           = 4
       HOLDDATE_INVALID          = 5
       INTERNAL_ERROR            = 6
       QUEUE_ERROR               = 7
       RUNNING                   = 8
       SYSTEM_LOCK_ERROR         = 9
       USER_INVALID              = 10
       OTHERS                    = 11.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " BDC_OPEN_GROUP
    *&      Form  BDC_UPLOAD_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM BDC_UPLOAD_DATA .
    CLEAR: WA_CCHAR.
    PERFORM bdc_dynpro USING 'SAPLCTMV' '2100'.
    PERFORM BDC_FIELD USING 'RCTAV-ATNAM' WA_CDATA-ATNAM.
    perform bdc_field using 'BDC_OKCODE' '=ANDE'.
    PERFORM bdc_dynpro USING 'SAPLCTMV' '2100'.
    perform bdc_field using 'BDC_OKCODE' '=WERT'.
    LOOP AT IT_CCHAR INTO WA_CCHAR.
      PERFORM bdc_dynpro USING 'SAPLCTMV' '2100'.
      PERFORM BDC_FIELD USING 'BDC_CURSOR' 'CAWN-ATWRT(01)'.
      perform bdc_field using 'BDC_OKCODE' '=INSE'.
      IF WA_CDATA-ATFOR = 'CHAR'.
        PERFORM bdc_dynpro USING 'SAPLCTMV' '2100'.
        PERFORM BDC_FIELD USING 'BDC_CURSOR' 'CAWN-ATWRT(01)'.
        PERFORM BDC_FIELD USING 'CAWN-ATWRT(01)' WA_CCHAR-ATWRT.
        PERFORM BDC_FIELD USING 'CAWN-ATWTB(01)' WA_CCHAR-ATWTB.
        perform bdc_field using 'BDC_OKCODE' '=/00'.
      ELSE.
        PERFORM bdc_dynpro USING 'SAPLCTMV' '2100'.
        PERFORM BDC_FIELD USING 'BDC_CURSOR' 'CAWN-ATWRT(01)'.
        PERFORM BDC_FIELD USING 'CAWN-ATWRT(01)' WA_CCHAR-ATWRT.
        perform bdc_field using 'BDC_OKCODE' '=/00'.
      ENDIF.
    ENDLOOP.
    PERFORM bdc_dynpro USING 'SAPLCTMV' '2100'.
    perform bdc_field using 'BDC_OKCODE' '=SICH'.
    PERFORM bdc_dynpro USING 'SAPLCTMV' '2100'.
    perform bdc_field using 'BDC_OKCODE' '=BACK'.
    ENDFORM.                    " BDC_UPLOAD_DATA
    *&      Form  BDC_CLOSE_GROUP
          text
    -->  p1        text
    <--  p2        text
    FORM BDC_CLOSE_GROUP .
    CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
       NOT_OPEN          = 1
       QUEUE_ERROR       = 2
       OTHERS            = 3.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " BDC_CLOSE_GROUP
    *&      Form  BDC_FIRST_SCREEN
          text
    -->  p1        text
    <--  p2        text
    form bdc_dynpro using program dynpro.
    CLEAR IT_BDC.
    IT_BDC-program  = program.
    IT_BDC-dynpro   = dynpro.
    IT_BDC-dynbegin = 'X'.
    append IT_BDC.
    ENDFORM.                    " bdc_dynpro
           Insert field                                                  *
    form bdc_field using fnam fval.
        clear IT_BDC.
        IT_BDC-fnam = fnam.
        IT_BDC-fval = fval.
        append IT_BDC.
    endform.
    *&      Form  BDC_UPLOAD
          text
    -->  p1        text
    <--  p2        text
    FORM BDC_UPLOAD .
    CALL FUNCTION 'BDC_INSERT'
    EXPORTING
       TCODE                  =  C_TCODE
      POST_LOCAL             = NOVBLOCAL
      PRINTING               = NOPRINT
      SIMUBATCH              = ' '
      CTUPARAMS              = ' '
      TABLES
        DYNPROTAB              = IT_BDC
    EXCEPTIONS
      INTERNAL_ERROR         = 1
      NOT_OPEN               = 2
      QUEUE_ERROR            = 3
      TCODE_INVALID          = 4
      PRINTING_INVALID       = 5
      POSTING_INVALID        = 6
      OTHERS                 = 7
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " BDC_UPLOAD
    *&      Form  f_get_f4_help
          text
         -->P_P_FILE  text
    FORM f_get_f4_help  USING    P_P_FILE.
    *F4 help for file path
      CALL FUNCTION 'F4_FILENAME'
        IMPORTING
          file_name = p_p_file.
    ENDFORM.                    " f_get_f4_help
    *&      Form  BDC_CALL_TRANS
          text
    -->  p1        text
    <--  p2        text
    FORM BDC_CALL_TRANS .
      DATA: IT_BDCMSGCOLL TYPE STANDARD TABLE OF BDCMSGCOLL.
      CLEAR: IT_BDC.
      CALL TRANSACTION 'CT04' USING IT_BDC
                              MODE  'A'
                           MESSAGES INTO IT_BDCMSGCOLL.
      IF SY-SUBRC EQ 0.
      ENDIF.
    ENDFORM.                    " BDC_CALL_TRANS
    hope it helps.try this and if not let us knw where exactly u face the problem.
    Regards,
    Leena.

  • Error in calling BAPI

    Hi guys,
    I'm doing an RFC scenario and publishing it as a java proxy. The BAPI i'm using here is BAPI_CHARACT_CREATE.
    The scenario is working fine, but when i have executed the Create BAPI with some value, I'm not seeing that Value to be updated in the characteristics data given by Transaction "CT04"
    I'm not an ABAPer, So if any1 can get me out of this, It'll be really helpful...
    Thanks Guys
    Varun

    You are using the "Commit Handling for single bapi calls" in the adapter?
    BAPI commit handling: The RFC adapter supports a single BAPI call including a commit in order to release a transaction and process the BAPI return table

  • Problem with batch valuation

    Dear PP gurus,
    I have a question about batch valuation.
    If i have a batch which is 100% pure thats why its value is motre than of 80% pure. i want valuate these two batches separetely. how can i do it.Please help.
    thanks
    sanket

    Dear,
    Batch valuation means assinging values to batch characteristics. it can be done from various places i.e QE11 or QA11. Characteristics can be also valuated in batch automatically & manualy.
    For example If you are using these characteristics , valuation will be done automaitcally when you execute particular transaction.
    LOBM_VFDAT expiration date, shelf life
    LOBM_VERAB availability date
    LOBM_RLZ_PROZ required remaining shelf life as a percentage
    LOBM_UDCODE usage decision
    LOBM_QSCORE quality score from usage decision
    Batch characteristics can also be populated from MICS for that you need to follow this process.
    1. Create general characteristics ( transaction CT04)
    2. Create MIC and assign general characteristic to MIC.
    3. Assign MIC to inspection plan or material specification
    4. record results
    Characteristic value will be automatically transfered to batch when you will record result for MIC.
    Note - If you do not want to use material specification & only using inspection plan, you need to select check box in QM plant level config setting ( spro -- qm - maintain setting at plant level ---select plant ---select inspection lot compl tab ---select check box for batch valuation without material spec.
    You have to use split valuation for a batch materail.
    You can have a different Valuation Class for that material in Accounting1 view. If you want, you can also create a new Valuation Class in OMSK according to your requirement.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Oct 5, 2008 6:48 PM

Maybe you are looking for