Transaction data from BI TO BPC : cube error

HI Guru's,
We are trying to load transaction data from BI to BPC ,now my requirement is does it possible to bring transaction data from BI Mulitprovider or SIMPLE Mulitprovider.
While we are loading the data from Multiprovider we are finding the following Error:
Error occurs when loading transaction data from other cube
Application: Ext_Rev_COS Package status: ERROR
Following is the Mapping :
*MAPPING
Category=*NEWCOL(ACTUAL)
Contract_Curr=ZSD_I06___F60
Customer=ZSD_I06___F10
Customer_Type=*NEWCOL(None)
Destination_T0=ZSD_I06___F14
Entity=ZSD_I06___F22
LeaseType=ZSD_I06___F133
Origin_From=ZSD_I06___F13
Product=ZSD_I06___F210
P_ACCT=*NEWCOL(P10020)
RptCurrency=ZSD_I06___F61
SKU=ZSD_I06___F11
Time=ZSD_I06___F59
SignedData=ZSD_I06___F68
*CONVERSION
Time=TIME_FISPER_CON.XLS
CUSTOMER=CUST_CON.XLS
Appreciated for your valuable Answers and Time.............
Thanks in advance..............

Hi,
Please refer to these SAP Notes:
1562812 - Failed to load data if there are lots of rejected data -BPC 7.5 NW
1689203 - Error occurs when loading transaction da
I believe that the first one will do the trick.
Hope these help.
Regards,
Vin

Similar Messages

Load transaction data from ECC to BPC 10.1 using US GAAP starter kit SP3

I need to understand a bit more the process to load transactional data into BPC 10.1. We have US GAAP Starter Kit SP 3. Below is an screenshot from the config guide:
It explains how transactional data can be extracted from ECC system to the SAP Netweaver BW data source 0FI_GL_10 and then transform it
to get it loaded into BPC. The Objects /PKG/FC_C01 and PKG/FC_DS01 are just mentioned here as reference because they come in the RDS for Financial Close and Disclosure Management, which not all companies have.
I believe the upwards data flow should be from Data Source 0FI_GL_10 to Data Store Object 0FIGL_O10 and then to InfoCube 0FIGL_R10. There is also a data flow that goes from 0FI_FL_10 to InfoCube 0FIGL_R10. Can anyone with experience with US GAAP starter kit answer this?
Thank you.

Hello, we were able to load actuals to our environment with the US GAAP Starter Kit, SP03. I followed the Operating Guide document up to section 5.2 and ran the Consolidation Data Manager Package with no issue. We are using the A20 Input and A20 Consolidation process flows based on flows F00, F10, F20, F30, F99, etc... According to the documentation, the Statemnet of Cash Flow and Changes in Equity should be automatically calculated and available from the changes
in Balance Sheet accounts once Consolidation is completed . However, when I ran the corresponding reports, they bring no data.
We loaded actual data for the whole 2013 and Jan 2014. Our intention is
to run the first consolidation for Jan 2014. The closing balance for period 12.2013 in flow 99 was copied to flow 00 2014 (opening balance). Flows 20 and 30 were updated with the corresponding balance sheet movements (increase/decrease), according to the delivered controls in the starter kit. However, cash flow is still showing no results.
I found the following text in the operating guide, but I am not clear if I am missing a step. Can you please clarify? This is telling me that I need to copy my 01.2014 opening balance (F00) to 12.2013 closing balance (F99, which is done by the copy opening data manager package, but in the opposite direction, from Y-1 F00 to Y F99) and in addition to also copy that balance to 12.2013 F00 (previous year opening balance)??
"5.2.2 First Consolidation
When operating the consolidation for a given Scope for the first time in the application, it is necessary to populate and process the prior year-end time period for this Scope, in addition to the first required consolidation period. This is because the flows dedicated to the scope change analysis are properly populated by the consolidation engine provided that at least one automatic journal entry has been detected in the consolidation used as opening consolidation, which by default is the prior year end (December, Y-1). To accomplish this, it is recommended that you copy all input-level opening data of the first required consolidation (flow “F00”) into the closing data (“F99”) and opening data (“F00”) of the prior year-end time period, including intercompany breakdowns.
This breakdown by intercompany in the balance sheet triggers automatic eliminations, which are carried over to the closing position. After the consolidation process, the closing data of the prior year
end time period will contain the appropriate source data for the opening data of the following consolidation, notably the opening automatic journal entries.

How to load Transaction Data from BW to BPC

Hi,
Can you please provide me step by step description forTransaction data load from BW infocube to BPC Application?
Is there any PDF for the same?
Regards,
Ram
Edited by: Ramchandra Laxmikant Puranik on May 18, 2011 3:23 PM
Edited by: Ramchandra Laxmikant Puranik on May 18, 2011 3:24 PM

Hi Ram,
The document that it was given by Rush is pretty usufull one, if you want more information you can take a look to this document or maybe you should go to the how to section
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/46/fcc2ef34ee439aaa56a4f6ba001e4d/frameset.htm
http://wiki.sdn.sap.com/wiki/display/BPX/EnterprisePerformanceManagement%28EPM%29How-to+Guides
hope it helps,

Error occurs when loading transaction data from other cube

Hi Gurus,
I'm currently working on a Transformation File for loading Transactional Data from BW to BPC but a error message is displayed "Error occurs when loading transaction data from other cube". I have already checked permissions for my user, double checked my transformation file and the dimensions, made all conversion files needed and the message has not changed.
Can anybody help me to solve this problem?!
Thanks a lot & Best Regards,
HH

Hi,
Here, the Transformation File & Conversion File. I have already tested both with another different InfoCube and they work but no for the one needed.
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
Category=*NEWCOL(ACTUAL)
P_0BASE_UOM=0BASE_UOM
P_0BUS_AREA=0BUS_AREA
P_0COSTCENTER=0COSTCENTER
P_0FUNDS_CTR=*NEWCOL(null)
P_0GL_ACCOUNT=0ACCOUNT
P_0LOC_CURRCY=*NEWCOL(MXN)
P_0MATL_TYPE=*NEWCOL(null)
P_0VENDOR=0VENDOR
P_DataSrc=*NEWCOL(UPLOAD)
P_ZMATERIAL1=0MATERIAL
P_ZMATERIAL2=*NEWCOL(null)
P_ZMATL_CLASS=*NEWCOL(null)
P_ZMATL_TESP=*NEWCOL(null)
P_ZRATIO=*NEWCOL(KF_inpmdInt)
Time=0CALMONTH
SIGNEDDATA=0TOTALSTCK
*CONVERSION
Time=Time_conv.xls
EXTERNAL     INTERNAL
201101          2011.JAN
201102          2011.FEB
201103          2011.MAR
201104          2011.APR
201105          2011.MAY
201106          2011.JUN
201107          2011.JUL
201108          2011.AUG
201109          2011.SEP
201110          2011.OCT
201111          2011.NOV
201112          2011.DEC
Thank you for taking at glance to the files.
Best Regards,
HH

Loading master/transaction data from BI to NW BPC

hi
what is best way of loading master & transaction data from BI to BPC?
I know around 6 options for loading master data and 5 options for loading transactional data from BI to BPC .
What is easiest and recommended method? what is typical method followed in your NW bpc projects?
thanks,.

Hi Raju,
There is a white paper on Loading master data. I've used it previously and both options work quite well. You can use either of them depending on what you are comfortable with. Its available on the HOW To white papers.

How to pass selection filters to logic and extract data from BI to BPC

Hi everybody. I checked the forum and I found and tried some solutions but not matching my main aim.
Scenario:
In the input schedule I have a button which runs a data package to upload datas into BPC, coming from a BI cube.
The pushbutton menu is ok. I tried also a solution suggested on the blogs and I can upload all transaction datas from BI to BPC successfully.
But when I run the data load, I want to take from the BI cube ONLY the datas matching the CVW selected, not all the datas from the BI cube. Second needing is to upload during the run 2 keyfigures from BI to BPC with same selection filter.
Example:
- I select in the Current view ENTITY: ACME and CATEGORY: CON
- I want to upload the 0AMOUNT and 0QUANTITY from the BI cube to BPC of the 0COMPANY "ACME" and the 0VERSION: "CON"
As I understand I can put in the Options of my transformation file using SELECTION , something to filter the datas, but I want that this is dependent from the current view selection. No extra prompts, and to upload the 2 keyfigures in the same process.
Any idea is welcome.
Thanks a lot in advance for any help.
Edited by: Walter Cista on May 29, 2010 9:29 AM
Edited by: Walter Cista on May 30, 2010 7:14 PM

Hi,
thanks for the answer, but my situation is little bit different.
I don't want to ask again with prompt to choose my ENTITY to the user, because I have on the main Input schedule, a menu button to choose ENTITY and so the user will just choose once.
I also understood that the variables selected with the current view, can be found inside DEFAULT logic with [dimension].Currentmember, but I do not work with default logic. I have my own ZLOGIC, and during the call I would like to pass the ENTITY choosen by the user to the logic. In this way when I run my transformation to upload data from a BI cube to BPC cube, I only select a slice of datas, not all the datas in the cube. In short, if I can manage the [DIMENSION].CURRENTMEMBER I will only take from the BI cube the datas I want. As I know if in the TRASFORMATION OPTIONS, in SELECTION if I pass some datas, like ENTITY = ACME I upload to BPC only BI datas of company ACME.....
So, I would like to do something like this.
Any reply and help is welcome
Walter

Import Transaction Data from BW Cube to BPC Cube

Hi,
Is there any document that explain how i can import/copy transactional data from bw cube to bpc cube like this below pic. http://img841.imageshack.us/img841/6998/prof.jpg
Thanks in advance.

Hi Again,
With these documents I can import transactional data with a single keyfigure but if there are more than one keyfigure, importing and assigning keyfigures to dimensions might get confusing.
For example i have two keyfigures "zbgstsad" and "zbgstsf" in bw cube and I have two account member in "S_ACCT": "S_F", "S_A". I did a conversion file with "zbgstsad(ext)->s_a(int)" and "zbgstsf(ext)->s_f(int)" rows. But i am not sure what i have to put instead of "?".
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
CONVERTAMOUNTWDIM=S_ACCT
*MAPPING
RPTCURRENCY=0CURRENCY
S_ENTITY=ZBGENTITY
S_ACCT= ?
S_TIME=0CALMONTH
S_CATEGORY=*NEWCOL(ACTUAL)
S_OB=0UNIT
S_URUNLER=ZBGURNLR
AMOUNT= ?
*CONVERSION
S_ACCT=[COMPANY]B_ACCT.XLS!CONVERSION
TIME=[COMPANY]B_TIME.XLS!CONVERSION
What do you recommend?
Thanks in advance.
Burak
Edited by: boguner on Aug 9, 2010 2:34 PM
Edited by: boguner on Aug 9, 2010 2:40 PM

"Error occurs when loading transaction data from other model" - BW loading into BPC

Hi Experts,
I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other model
model: AIACONS. Package status: ERROR
As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
Has anyone encountered similar or have any ideas as to the problem?
Best,
Chris

Hi Vadim,
It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
We get a warning when we try and validate the transformation file:
"Error occurs when loading transaction data from other model".
This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself. The validation log says:
Validate and Process Transformation File Log
Log creation time
3/7/2014 16:09
The result of validation of the
conversion file
SUCCESS
The result of validation of the
conversion file with the data file
FAIL
Validation Result
Validation Option
ValidateRecords = NO
Message
Error occurs when loading transaction data from other model
Reject List
I can't find any errors anywhere else.
Best,
Chris

Error while loading Transactional data from NW BW Infoprovider

Hi,
I am trying to load the transactional data using the delivered "Transactional data from NW BW Infoprovider" package and getting error message Error occurs when loading transaction data from other cube .
Below is the transformation file content
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=NO
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 9999999999999
ROUNDAMOUNT=
*MAPPING
ACCOUNT = 0ACCOUNT
BUSINESSTYPE = *NEWCOL(NOBTYPE)
BWSRC = *NEWCOL(R3)
COMPANYCODE = 0COMP_CODE
DATASRC = *NEWCOL(R3)
FUNCTIONALAREA = *IF(0FUNC_AREA = *STR() then *STR(NOFA);0FUNC_AREA)
GAME = *NEWCOL(NOGAME)
INPUTCURRENCY = *IF(0CURRENCY = *STR() then *STR(NOCURR) ; 0CURRENCY)
PROBABILITY = *NEWCOL(NOPROB)
PRODUCT = *NEWCOL(NOPROD)
PROFITCENTER = 0PROFIT_CTR
PROJECT = *NEWCOL(NOPROJECT)
TIME = 0FISCPER
VERSION = *NEWCOL(REV0)
WEEKS = *NEWCOL(NOWEEK)
SIGNEDDATA= 0AMOUNT
*CONVERSION
Below is the Error Log
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide=ZPCA_C01
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\R3_TD_P&L.xls
CLEARDATA= Yes
RUNLOGIC= No
CHECKLCK= Yes
[Messages]
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other cube
Application: ACTUALREPORTING Package status: ERROR
Does anyone had this issue before or is there something that needs to be looked in the BW delivered task ?
ANy Inpout will be appreciated.
Sanjay

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

BPC 7.5 NW: Loading transaction data from infocube

Hello, I am trying to load transaction data from an infocube into a BPC application using a package based on /CPMB/LOAD_INFOPROVIDER.
The master data (cost center and cost element) are already loaded. As they are compounded, we have added in the key the CO area (eg ID=0CO_AREA+ID)
I am facing an issue that the system ads leading 0 in front of the values of those master data comming from the cube.
So the data looks like CO_AREA00000000000cost_center.
As the data where correctly loaded in the dimensions (CO_AREAcost_center), the loading fails.
How can we remove those 'O'?
Thanks!

Hi Anton,
We use this in most of our projects; since auditing is one of the important requirements.
You should enable the auditing for selective categories only. With each transaction data entered, it will keep a log, which can increase the size a lot, and hence impacting the performance.
If you are enabling the log, you should frequently purge the audit data as well. However, you should take a backup of this and then purge it.
Hope this helps.

Problem while data processing TRANSACTION data from DSO to CUBE

Hi Guru's,
we are facing problem while data processing TRANSACTION data from DSO to CUBE. data packets processing very slowly and updating .Please help me regarding this.
Thanks and regards,
Sridhar

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (give BIrequest name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.
You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the cube.
Thanks,
JituK

Pass transaction data from an InfoProvider to the BPC within BW

Hi Gurus,
I need to pass transaction data from an InfoProvider to the BPC Real-Time InfoCube, but I need to do from BW, and not from the BPC Excel interface.
The reason is that I want to make the whole process in one step, and at the beginning of the process the end-user has to introduce some parameters in the BW, as we are launching the process chain from a transaction.
Therefor I copied the process chain /CPMB/LOAD_INFOPROVIDER and tried to introduce the different parameters that are normally delivered by the prompt in the excel interface.
Can anybody help? Does anybody know what parameters for each process type have to be introduced, in what form and if all the process types are needed?
Making it with a normal BW transformation is also not an option, as we don't want to change from plan mode and stop people from planning.
It is very important for my end user to do everything in one step, without having to enter the BPC Excel interface.
Thanks in advance.
Cheers,
Àlex

Hi Frank,
I have checked and we have many processes in SM50 available for the job to use. Sometimes there are no other jobs running in the BW System except for the 2 jobs but still the 2nd job waits for the first to finish.
I did another check on transaction code SM58 in BW System. Here it shows all the transactional RFC queues that is being generated by the 2 jobs. I saw that only TRFC queues are able to execute at one time. I am not sure if this is the problem but is it possible to set the number of queues that can be executed at one time to more than 2? If yes, where can I find such a setting?
This is quite urgent as this problem causes all my jobs to end very late.
Thanks.
Shunhui.

Load transaction data from R3 (FI, CO, HR, MM...) to BPC 10 directly

Hi everyone,
Anyone know if is it possible to load transaction data from ECC (FI, CO, HR, MM...) to BPC 10 directly? There is a documment titled "How to Implement Delta Loading of Transaction Data from ECC and BW 7.3 into BPC using Delta Initialization in BPC 10NW" but only refers to load data from BW.
Thanks&Regards,
Fernando.

Hi Fernando,
BPC NW 10.0 has DM packages that allow load of Master and Transaction data directly from ECC system, but it's very limited. I.e. just a couple extractors are supported right now.
Regards,
Gersh

Error While loading data from 8 DSOname to Cube.

Hi All,
while loading data from 8<DSONAME> to CUBE , the data is Sucessfully loaded data into Cube, but the Request Status is shown in Yellow,why it is showing, please tell me how to make it Sucessfull.
Thanks and Regards,
santosh.

HI All,
In ST22 i'm getting Short Dump, the Error massage is
MESSAGE_TYPE_X
WHAT HAPPEN
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error Analyis is:
Short text of error message:
Generic process chain
Long text of error message:
Technical information about the message:
Message class....... "RSMPC"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
"MESSAGE_TYPE_X" " "
"CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM005"
"IF_RSPC_EXECUTE~EXECUTE"
there is any Patch Problem...
Please let me Know how to resolve this issue.
thanks and regards,
santosh.

Error occurs when loading transaction data from other model

Hello Experts, I am trying to validate my transformation file and I can see peculiar behaviour of the transformation file. Even though the transformation file is not complete/ complete with all the mappings, i am getting the same error as above.
I can see options, mapping and conversion sections are validating successfully and throwing the above error.
Incomplete Transformation File
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 10
ROUNDAMOUNT=
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
Validating the transformation files
Validating options...
Validation of options was successful.
Validating mappings...
Validation of mappings was successful.
Validating conversions...
Validation of the conversion was successful
Creating the transformation xml file. Please wait...
Transformation xml file has been saved successfully.
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Error occurs when loading transaction data from other model
Validation with data file failed
I am getting the same error with complete transformation file also. Please let me know where I am doing the mistake or is it a system error?
Thanking you
Praveen

Hi,
By
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
you want CUSTOMER to receive a fixed string "NO_CUST"?
If so use,
*MAPPING
CUSTOMER = *STR (NO_CUST)

Transaction data from BI TO BPC : cube error

Similar Messages

Maybe you are looking for