Transaction data in MRP areas in APO

Hi,
We are using storage location MRP areas in APO.In ECC we have a storage location  5000 under  plant 1000. We have defined storage location as MRP area and transferred to APO. Now we have two locations in APO one is 1000 and another location 5000 (with location type 1007).one material is existing in both these locations. We have a forecast in location 5000 and a Pur requisition is created for this material in 5000 after SNP heuristics. We are able to see the Pur Requisition in 5000 location in the product view.But when we are looking in 1000 location in the product view,we are not able to see the same purchase requisition.Is this standard functionality or am i missing any setting?
In ECC we can see the same purchase requisition in both the MRP areas in 5000 and 1000 in MD04. But the same is not in APO? we are not able to see in 1000 plant in product view but could see in 5000 location in product view.
Any one has this issue?
Thanks
Chandrakanth

Hello Chandrakanth,
Check if the storage MRP area is not been transfered to APO as Plant.
Take a look on note 896482, perhaps it can helps in analyze how you are CIFing the MRP areas to APO.
Hope it helps.
Regards,
Michel Bohn

Similar Messages

  • Unable to do the (CCR in APO) comparison/reconciliation of transaction data PO and PR in APO

    Hi Gurus,
    Unable to do the (CCR in APO) comparison/reconciliation of transaction data PO and PR in APO Due to the error 181-Schedule line does not exist in APO ,Error code 182-Schedule line without external number does not exist in R/3.
    kindly suggest me ,what we need to do corrective action from ECC side and APO side.
    Regards,
    Babu

    Hi Babu,
    First make sure that order is not set with deletion flag, you can check some random orders for this.
    Steps to be followed:
    1) for all entries with error "181-Schedule line does not exist in APO" click on "Send to APO". similarly for entries with error "182-Schedule line without external number does not exist in R/3" click on "Send to R/3", most likely this type of issue get resolved with this step only, if not.
    2) Next you need to go to transaction code /n/sapapo/cq, check what all messages you are getting there. Correct the error if you are able to understand it from here i.e. rfc connection is not set, no active IM exists etc..
    3) In case you are not able to understand or correct the issue from CQ, then you need to go and check in transaction code CFG1 in ECC, and /n/sapapo/c3 in APO, check in ECC with object CIF and log class "only very important logs".
    In APO object "CIFSCM" and log class "only very important logs".
    Most probably you will be able to get exact or directional reason of the issue.
    Hope this helps.
    Rgds
    Sourabh

  • What are the settings master data and transaction data from r/3 to in APO.

    Hi all,
    Can u suggest me ,I need to conform in apo what are the setting when transfering master data and transaction data from r/3 to APO.
    frm
    babu

    Hi
    The data get transfered from R3 to APO via CIF which is SAP standard.
    Please find enclosed herewith the link which will provide you detail information regarding it.
    http://help.sap.com/saphelp_scm41/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
    Please let us know if it helps you. Please also let us know if you have any more specific question.
    Thanks
    Amol

  • CIF - Master/Transactional Data From ECC to APO

    Working on CIF Data From ECC6.0 to APO(SCM 5.0)..
    If i choose MRP type XO in ECC - Master Data & Transactional Data is moving properly to APO.
    As we are using MRP in ECC6.0..and the MRP Type is PD...
    I want to CIF the Master Data & Transactional Data using MRP Type PD? is it possible?How?
    Regards,
    Rajesh Patil

    Hi Rajesh,
    As visu rightly indicated, it is always safer to use XO while planning in APO.  Still, if the business requirement compels to use PD, you can cif with PD, then copy the data from active to an inactive version and then carry out the simulation planning.  Once results are copied, you can change the mrp type to xo in R/3 and re-cif it.  Then you can compare the result in APO between active and inactive versions.
    Regards
    R. Senthil Mareeswaran.

  • Transaction data from ECC to APO DP

    Dear All,
    Can you tell me if i can directly load transaction data directly from ECC to APO BW Infocube.
    For example i want to load say sales orders from ECC.
    Can i directly load from ECC --> APO BW Infocube --> DP Keyfigures.
    Or any staging is required inbetween ECC and APO BW
    Thanks
    Santhana.

    Hi Santhana,
    If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
    1. Create Generic Data Source in ECC for thet Sales Order table.
    2. Replicate that data Source in to APO BW with Source System.
    3. Create whole data flow process by using created Data Source.
        Data Flow Process: 1. Info Package
                                      2. Info Source
                                      3. Info Cube
                                      4. Transformation between DS & IS, Then IS & IC
                                      5. Data Transfer Process.
    4. Load data from ECC to APO BW
    5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
    Hope this will help you.
    Regards
    Sujay

  • Custom Transaction Data getting Transfer from R/3 to APO only through CFM3

    Custom Transactional Data getting Transfer from R/3 to APO only through CFM3
    Requirement :Automatic updation of Custom Transactional Data R/3 to APO Auto Transfer like Normal PO Changes Reflection
         While working with Core Interface The Standard Transactional Data is getting updated to APO Directly for PO Qty Changes.
          But I have written code in the R/3 User Exit to Calculate the Open Target Quantity and Transfer the Values to APO through the Structure .
          It is Populating the values and updating in the ZTable of APO [User Exit] only when we activate and De-activate the Integration Model thru CFM3 Manually.
       Could you advise and provide the info for solution if you have come across the same scenario .
    Thanks in Advance.
    With Regards,
    Naveen Mutyapu.

    Hi All,
    I have not received answer from the forum, but solution is without CFM3 also we can able to send data from R/3 to APO whenever we change the PO with populating the necessary values  in the structure IT_OUTPUT_CUS..
    Regards,
    M N Kumar.
    Edited by: MNKumar on Sep 14, 2010 8:23 AM

  • R3 Transaction Data CIFed to APO

    Hi All,
    In APO ,Master data CIFed from R3 is assigned to active model and active version. Similarly ,does transaction data transferred from R3 to APO have any model related to it.
    In case if I transfer a PO from R3 to APO, does it get associated to any model.
    Regards
    Arun

    Hi Arun,
    Model--> Model will have alll the master data
    Vesrion--> version will have copy of all master data of assigned model & transactional data
    Active model & version is "000" & "000" respectively
    under one model you can have many versions but out that only one can be active version. but master data for all the version would come from respective modle. it means master data will be remain common under one modle though version changes..
    but you can plan whatever you want with inactive versions.
    and again to transafer data from APO  to R/3 is possible only from active version. Soyou have to redo it whatever you simulated in simulation version in to active version. then this will talk with R/3
    R/3 can talk with APO only with active version & activel model.......
    Now once you CIF master data (plant , material..etc) will be moved to active model"000"
    & transactional data will be CIFed to active verion of that model..means CIFed to active version"000"
    But if ou want to work with other inactive model & inactive version..
    copy version to version--->use versio copy transaction
    copy modle to model--> use /SAPAPO/MVM_SVC_CO_MOD_VERS & /SAPAPO/MVM_INT_SVC_CO_VER
    Regards
    Thennarasu.M

  • How to transfer Sales order data from R/3 to APO!!

    Hi Techies,
    I am in the process of moving some sales order data for a particular mat/loc combination in cfm1 after creating a integration model iam even activating even in R/3 but after doing this iam not able to view those sales orders in RRP3 t-code IN APO side.
    Kindly let me know what is the procedure to transfer transactional data from R/3 to APO and to do enhancement in CIF which carries Transactional data .
    Problem solving answers would be rewarded duly !!.
    +PKP.

    Hi PKP,
    The field SPEC_STOCK has the description "Key for Special Stock Section" and is linked to schedule line of the PO. This seems to be something linked to special stock, but I am not very sure about the relevance of this field.
    I do not see any related field when I check the order in RRP3 or in RRP2. In standard SAP, you would only be able to use the fields that are already visible in APO. Otherwise you need to add the field to the standard SAP t-code display (read the value from SOMEWHERE and then display it in RRP3. This is possible using Badi /SAPAPO/RRP_IO_COL). Then only you can see the values which you have populated.
    If this field SPEC_STOCK already has some functionality (which it should have, though I am not sure what it is), you might not be able to use it for other purposes (since system does some validations for certain fields).
    You are updating the value for this field in IT_OUTPUT internal table, you also need to add an X in the corresponding field in the internal table IT_OUTPUTX.
    You could try putting this X, so that your changes are considered in CIF, but I am not sure what the impact may be, and you could get a dump also possibly. Even otherwise, since this field doesn't seem to be visible against a PO in APO, I am not sure if this would be helpful for you.
    As far as I could see, I did not find any standard field which could be helpful for you.
    May be if you open a fresh thread and ask for advice on how to send any custom comments for PO to APO, someone could provide some inputs.
    Thanks - Pawan

  • Subcontract MRP Area with quota usage - urgent

    We have a subcontractor supplying assembly X which in turn require us to supply component Y to the subcontractor. We have two vendor for supplying component Y to subcontractor. Scheduling agreement with component vendors are set up for direct delivery to subcontractor. Both the scheduling agreements are included in the source list with MRP indicator 2. Quota arrangement is set up for the component.
    We have set subcontractor MRP area and assigned the same to component Y material master. Special procurement key 20 is assigned in subcontractor MRP area. Quota usage and source list are duly enabled. Quota usage indicator is 3 which provides for MRP, PR, schedule line etc.,
    When we run MRP ffor component Y for subcontract MRP area, system is generating schedule line for but without update quota file. Further, the scheduling agreement picked up is not of the correct vendor as per Quota logic.
    Does SAP support quota usage with subcontract MRP area. If not, is there a work around.
    Shall appreciate urgent response

    Dear Ravi,
    you will get a seperate location product for your material. MRP areas in apo are represented by a seperate location (type 1007 = storage location mrp area). You can transfer your ecc mrp areas via cif (CFM1). The master data you maintain in mrp section of the material master in R/3 will be trasfered to that location product. Furthermore you can maintain it manually in apo MAT1 (location = name of your mrp area). That technique provides you the possibility to maintain different parameters for the plant and the mrp area.
    Kind regards,
    Christian

  • Cannot transfer transactional data

    Hi Experts,
    I really need your help regarding this incident.
    I am having problems with the APO system. I cannot transfer the transactional datas from APO to R/3. However, I am able to successfully transfer the transactional data from R/3 to APO. When I had run /SAPAPO/CCR, it returns the error "No Active Integration Model". Isn't it that integration models are only configured in R/3? I think the integration models in R/3 are properly created coz I am able to transfer the transactional data from R/3 to APO.
    I would really very much appreciate your help.
    Thanks again.
    Sincerely yours,
    Ria

    Hi Ria,
    Suggest you to again review CIF setting and make sure right logical system is defined :
    CIF Settings in R/3 :
    Check ALE settings or activate ALE settings
    Define the logical system BD54
    Assign logical system to a client SCC4
    Set the RFC destination SM59
    Assign target system and queue type CFC1
    Maintain the SAP APO release NDV2
    Activate BTEs for SAP APO integration BF11
    User parameters for CIF CFC2
    CIF Settings in APO :
    Check ALE settings or activate ALE settings
    Define the logical system BD54
    Assign logical system to a client SCC4
    Set the RFC destination SM59
    Set up business system group
    Create BSG /SAPAPO/C1
    Assign logical systems to BSG /SAPAPO/C2
    Maintain distribution definitions /SAPAPO/CP1
    User parameters for CIF /SAPAPO/C4
    Make sure you have right setting in SAPAPO/C4
    Logging :Detail
    Debug : Debugging off
    Also check in SM58 for any error and SM59 for connect and check below thread
    APO with Variant Configuration - Characterisitcs based SNP
    Manish

  • RIMODINI for CIF Object: [MRP Area Matl, MRP Areas]

    Hi Experts,
    We have Material maintained at MRP areas in R/3. Integration model is maintained with CIF object : [MRP Area Matl, MRP Areas] to bring the new material master at MRP Area changes through Delta mode(CFM3), but the changes to existing material in Integration model at MRP Area does not come over immediately to APO and not through DELTA mode.
    We have to execute Report: RIMODINI to bring the changes of existing material master changes at MRP Area level to APO. Since its a performance intensive it takes too long  to execute to bring changes over to APO.
    Is there alternative method of bringing the existing material master changes at MRP area level for CIF object : [MRP Area Matl, MRP Areas] to APO without executing RIMODINI.
    Additional Information: R/3: SAP_APPL     470     0030     SAPKH47030
                                     R/3: PI                2004_1_470     0015     SAPKIPZI5F
                                    APO:SCM                    500     0012     SAPKY50012
    Thanks,
    K Sendil Kumar
    Thanks,
    K sendil Kumar

    Hi Sendil,
    Are you getting this error only for Material or other master data also?
    Please can you quickly check below mentioned checks:-
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/scm/cif
    Regards
    Samir

  • SAP BPC 7.5 - Netweaver- File Upload -Transaction data along with comments

    Hi,
    We have a requirement to upload a file containing comments along with transaction data.
    We are planning to store commnents in a Ztable from the flat file and read and post comments in the BADI
    using UJC*Add_cmt.
    Use a custom process chain to execute the above steps and link to a pakage.
    Please let me know if there is a better process/how to doc  and any code for the above.
    Your early reponse is much appreciated.
    Regards,
    Venkata

    Hi Venkata,
    *MVAL  function allows you to use multiple time period columns. I don't think this may help your scenario. I my opinion you may need to use two transformation files to bring the data from BW cube to BPC. BPC is an account base model, I don't think you can load the data in two columns in BW cube using one transformation file.
    Thanks

  • MRP Area field in the stock overview screen (tcode MMBE)

    Hi,
    I am curious if there is a way for us to disable the system from populating the MRP area field in the selection screen in tcode MMBE? I checked this with a developer and he told me that the system assigns it based on the last transaction or last few transactions where the MRP area was used.
    So for example, I am in tcode MD04 to look at a material for MRP area SLOC 0005. Then when I enter tcode MMBE, the system will immediately populate the MRP Area field as SLOC 0005. Is there a way for me to prevent the system from filling this field? I only want this field to be manually entered. It is because it is misleading and most end users won't even remember or bother to scroll down the screen all the time. I read that there were notes for this but all of them are for ECC 6 and our system now is on ECC 6 EHP 5.
    Can you please help me with this? Thank you.
    Regards,
    Chester

    Hi Chinna,
    Thank you for your reply. I have checked the thread below and I think the two options that I have are to use a variant or to do some modifications. I will check the latter with the ABAP resource. As for your 3 comments there, I don't think I will disable the history and I have tried the parameter value but it was not working. For some reason, the system was overwriting the empty value of parameter ID BERID. Thanks!
    Regards,
    Chester
    Message was edited by: Chester Chavez
    This issue is still not resolved. Thanks!

  • Parallel loading of Transaction Data

    Hi,
    We are trying to load transaction data into Inventory Valuation cube (0COPC_C04).
    This gets data from multiple datasources. My question is, Can the different infopackages (different infosources) be scheduled in parallel into the same cube .
    This is transaction data. We are loading manually in production based on some selection criteria.
    Thanks

    Hi,
    For the first part, yes your understanding is correct. Delete all cube indexes before you start any loads and then recreate them after all loading has been completed. This is to increase load performance. Make sure that you recreate the indexes otherwise you'll have problems in querying.
    For the second part, yes, as long as the selections are different and the data loads are from different source systems, you can start another data load in parallel to the one already in progress. This again will help you load faster and will reduce load times..
    Cheers,
    Kedar

  • How to add  subscreen(mrp area)  to mrp1 view

    Hello SAP GURUS,
      while creating the material with FERT material type, i found that there was no subscreen containing data for mrp area in mrp1 view.How to add this subscreen in mrp1 view.
        I checked all the customization data like maintain screen sequence order,assign material type, industry sector and all to the screen sequence reference.Everything is there,than also couldn't manage.
         So if you know the process than plz share.

    Hi,
    The below link may be useful.
    https://wiki.sdn.sap.com/wiki/display/ABAP/ABAPDevelopmentand+Programming
    (At the end of the Page) In this all the pages of MM01_Screen Exit PArt 1 and Part2 are useful..
    If you click on any one of thm it will lead you to the Attachments where in you can look into all the attachments..
    Regards,
    Siva

Maybe you are looking for

  • Having Display Issues in Explorer

    I have a page that renders just fine in Explorer when I have the page w/ the file ext. .hmtl, but when I turn the page into a .cfm page then the whole page displays incorrectly. Here are the 2 examples: HTML Page: http://carolinasparking.org/template

  • Use of Phases

    Hi why do we use phases. "Phases are used for scheduling, determining capacity requirements, and costing. The dates and capacity requirements for operations are derived from the corresponding phases." This is what I found in help. all this can be don

  • Contacts duplicating

    I cannot figure this out for the life of me. I have my contacts in my iPhone, Yahoo, and Mac Address Book (connected to Yahoo) althought a few might appear in one and not in the other yet. I bought a new 4S which ATT synced my contacts for me. I just

  • COPA Fields using the FM PRELIMINARY_POSTING_FB01

    Hi everyone, I am using the Function modules PRELIMINARY_POSTING_FB01 to park the GL invoice documents. I am not able to populate the COPA fields of the document. How do we pass copa fields to the FM PRELIMINARY_POSTING_FB01?

  • I have lost my catalog

    I have been moving pictures to a new computer. I planned to put my catalogs in C:/ data/pse/catalogs/   But they didn't get there. I have two catalogs that I want one of which is open, I can't find the the largest one.I have been adding things to it