Transaction data loading error
I have one info-cube: C1, characterstic: Time(0calday), material number(IO_MAT), company code (0comp_code)
key figure: price of material (IO_PRC)
I create one datasource for transaction data
Material Comp code Price
110001 7770 23
when I create transformation, it says error 1::
Rule 2 (target field: IO_PRC): Field PRICE must be assigned to an InfoObject
Message no. RSTRAN526
Diagnosis
No InfoObject is assigned to field PRICE. This is mandatory if you want to use the corresponding rule type.
System Response
The rule is invalid.
Procedure
Assign an InfoObject to the field
error 2:
Key rule 3 (target field: 0CALDAY): Initial update set
Message no. RSTRAN508
do I need another column in my upload file for date? should I put "16/11/2011" or "11.16.2011" for example?
if I don't provide date, is it ok to run DTP? thanks
hi,
I already have key figure IO_PRC( price) defined and in my datasource, I have also a field called " price" as well as in the upload file. and I already create a mapping by link "price" (upload file field) and IO_PRC (key figure)
The issue is:
No InfoObject is assigned to field PRICE.
and second issue is:
Rule (target field: IO_PRC): No source unit assigned
Message no. RSTRAN517
My key figure IO_PRC is defined as:
Data type: CURR, fixed currency: USD Unit/currency: empty, Data element: /BIC/OIIO_PRC
anything missing?
Similar Messages
-
Purchasing transaction data load error at DTP level.
Hi All,
we are doing daily load for the MM Purchasing Transaction data.
Today it failed while it is loading from2LIS_02_SCL( PSA) to DSO.
The error message is like this.
An error occurred while executing a transformation rule:
The exact error message is:
Overflow converting from '1052332762320000.00'
The error was triggered at the following point in the program:
GP46PDVI7I2JSVXEJSYCMP7PAFB 1773
Request to help in Correcting this error.
Thanks,
Manu.Hi,
The value exceeds the maximum value of any integer ABAP type, and is the source of error.
Try to identify the record in the source system and fix it there, repeat load. Else look it up on the PSA and fix.
Regards,
Arek -
Flat file transactional data load error
I am trying to load a flat into a BPC model. I am using a DM " Import transational data load from flat file" to load the data. The transformation file and data file are validated correctly.
However,when i am running the DM package, i am hitting the below message.
Task Name : Load
Cannot perform Read.
Model : Package Status : Error.
We have two secure dimension in the model. I have tried different combinations even with PRimary admin role and i am still getting the same error message.
Is this a secirity related error ? The model has been transported from DEV . In DEV, i am not facing any errors.
Any advise/ help?Hi King,
I think in the back end you need check the option real time load behavior, Is it in planning mode or loading mode. If possible share your error message screen.
Goto RSA1 ---> select your cube--> Right click---> change real time load behavior--> Change it in to planning mode
Regards,
Saida Reddy Gogireddy -
How to rectify the errors in master data loads & transactional data loads?
hy,
please any one tell me
How to rectify the errors in master data loads & transactional data loads?
thnQ
RaviHi,
Please post specific questions in the forum.
Please explain the error you are getting.
-Vikram -
Master Data/transactional Data Loading Sequence
I am having trouble understanding the need to load master data prior to transactional data. If you load transactional data and there is no supporting master data, when you subsequently load the master data, are the SIDs established at that time, or will then not sync up?
I feel in order to do a complete reload of new master data, I need to delete the data from the cubes, reload master data, then reload transactional data. However, I can't explain why I think this.
Thanks, KeithDifferent approach is required for different scenario of data target. Below are just two scenarios out of many possibilities.
Scenario A:
Data target is a DataStore Object, with the indicator 'SIDs Generation upon Activation' is set in the DSO maintenance
Using DTP for data loading.
The following applies depending on the indicator 'No Update without Master Data' in DTP:
- If the indicator is set, the system terminates activation if master data is missing and produces an error message.
- If the indicator is not set, the system generates any missing SID values during activation.
Scenario B:
Data target has characteristic that is determined using transformation rules/update rules by reading master data attributes.
If the attribute is not available during the data load to data target, the system writes initial value to the characteristic.
When you reload the master data with attributes later, you need to delete the previous transaction data load and reload it, so that the transformation can re-determine the attributes values that writes to the characteristics in data target.
Hope this help you understand. -
Common data load errors in BI 7
Hi , i would appreciate if any one can provide me a list with most common Data load errors effecting both master and transactional data in SAP BI 7 or BW 3.5..
Hi AAL,
There're lots of loading error posts in this forum. This one I guess is good for you:
production support errors
production support issues
Or you can search yourself using key word common load error etc.
Hope above helps.
Regards,
Frank -
Data Load Error due to Master data deletion
Hi,
While doing the transactional data load I am getting following error.
+Master data/text of characteristic ZFOCUSGRP already deleted Message no RSDMD138 +
ZFOCUSGRP is an InfoObject (with Text). Last week we changed the source system from CRM to R/3 during that time we deleted all the Texts in ZFOCUSGRP manually from the table.
This error is not happening always some time it load properly. I executed the RSRV for InfoObject ZFOCUSGRP and InfoCube still this error happening.
Is there any way to fix this error?
Thanks in advance.
Thanks
Vinodcheck this:
Re: Error while running InfoPackage
Master data/text of characteristic 0MATERIAL already deleted
Master data/text of characteristic ZXVY already deleted
Hope it helps.. -
Transactional data loads PIR, IM stock, Open PO's documentation
I have to make a documentation of the process of transactional data loads.
transactional data loads pirchase info rec, IM stock, Open PO's
the transactional data is live in both sap and legacy, so they have to be even in both systems in all stages of this process.
how do i maintain that is the question.
send me any details regarding this.
thank you
sridharCheck these three thigns
/n/sapapo/CCR
/n/sapapo/CQ
Check what type of stock has active IM, and what type of stock went in after you created the GR.
Still if you have any problem let us know.
My -
Most common BW data load errors in production and how to solve them ..
Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shobahi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error -
What are the frequent data load errors in production support?
what are the frequent data load errors in production support?
It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri -
Data Loading Error : ToomanyError records.
Hi All,
I got Data Loading error when I am loading from Flat File.
Following is the error message :
Too many error records - update terminated
Error 18 in the update
No SID Found for value '00111805' of Characterstic ZUNIQUEID (Message No 70)
can anybody help in resolving the issue.
Regards,
Chakravarthyhi
Check the format of your charecteristics and key figures .
Check you put data separators in you flat files approriately
In the particular charecteristics ZUNIQUEID ,ensure data is consistent...check the related tables
Assign points if useful
Regards
N Ganesh -
Data Load error Please respond ASAP
Hi ,
When i am trying to load data for year 07 using rule files its showing an error and aborting the data load
Error Msg " Data Value [2007] Encountered before all dimensions Selected,[5] Records Completed"
Any help greatly appreciated.
ThanksKey here is that 5 records were loaded before failing on the 6th, indicating it's not a header issue on the load rule.
Check the first 5 records and see how the column containing 2007 differs between them and the failing 6th record. Perhaps the 6th record has a null (as indicated eariler) or prehaps 2007 is not the name of the member in the outline.
I have had both issues give similar error results.
J -
Data load error regarding timestamp
Hi All,
I am getting data load error related to time.
I am using 2lis_02_SCN for CNFTM(time stamp) filed
with value "08:00:" need to convert to 08:00:00...for some records and rest of the records are coming with normal 6 digit time.
please send your suggestion as early as possible.
Thanks
RupaHi Rupa,
Try out following sample code inthe transfer rule for the same info object and it should work
lv_len = strlen( str ).
if lv_len = 4.
concatenate str '00' into str.
endif
Regards
Kapadia -
Sap bw 7.3 master data load error
sap bw 7.3 master data load error
erroe: Exception in Substep RulesHi Jayram,
I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
1. Duplicate records
PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
2. Erroneous records.
Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
Hope it helps!
Regards,
Pavan -
hi friends ,
we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB update(251new/160 chnaged): Errors occured.
what should i know from information and what are the reasons for this load failure and possible rectification methods.
This load is through process chains and aslo a delta load.
Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or should i repeat from the subsequent process?
Plz help.
I award points.
regards,
siddarthaHi siddharta,
look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
Regards,
Jzergen
Maybe you are looking for
-
Email send issue using "Mail Server Load balancer" (Cisco ACE 20)
Please let me know if someone have experienced this kind of issue or any suggestions. The send email action was working file in MII with smtp mail server on port 25. Recently basis did a change in mail server ip address and they installed a new Load
-
I was looking to rip my DVD's to an external hard drive and was wondering if there was anyway for me to use Apple TV to play ripped DVD's? I want to make my entire collection on a hard drive so I can just scroll through and watch DVD's from the hd in
-
CREATE OR REPLACE PROCEDURE return data like SELECT statement
"SELECT * FROM SEARCH_KEYWORD" is successfully done and return the data of the tables. Now, I want to run that on server side using PROCEDURE. I successfully executed the below scripts. Please teach me how to call the sp_test procedure. OR if you hav
-
Sequence in parent and row level security
Hi, I have a column with "seq in parent" for the "autogen type" property in Designer. I also have row level security (RLS) (or fine grained access control) on this column's table. Since there are data that could not be seen because of the RLS and the
-
Iphone6 will only send texts to other iphones
My iPhone 6 will only send texts to other iphones. I believe I have tried everything. Any help would be great.