Transaction Data Tab

Dear All,
When user creates ticket all the user status displayed in ticket under Transaction data tab-->Action Tab.
But in my case for some user all the configured statuses are not getting displayed.
What could be the reason? User has got enough authorization too. Is any additional autho is required?
Regards,
Nikhil

Dear Friend,
I think you are confused, in transaction data tab
Actions tab-will show the scheduling actions and action which are carried out with the status of their execution.
Status tab shows all the status values you have configured.
This tab basically shows the current status of the ticket.
Please reward points.

Similar Messages

ChaRM Transaction Data Log Not Updating in 7.1

Upgraded to 7.1 and still using 7.0 CRM_DNO_MONITOR and CRMD_ORDER to completed change requests in flight in existing projects. The Transaction Data tab's Object and the Fast Entry tab's Overview show entries for action taken prior to upgrade. However there are no new entries for actions used or transports created after we started using 7.1. Is this still supported? Where can I see updates the the CR/CD for audit and reference purposes?

It depends a bit on your final intention. Bascially you have a shared state that you want to access asynchronously from different places. If you know that the actual object is only created once (terminilogie here is a bit shaky as every wire split would create a copy of the LVOOP object but I hope you know what I mean), you could use a global or Action Engine to store the state. Using a DVR for this state and adding the DVR to your object class data is however a more scalable approach as it will allow you to instantiate more than one object of that class and each one will contain its own DVR that will reference the same value for the specific object instance even if you split the object wire, creating actually two copies of that object (but for the purpose of this discussion they would be still the same object instance).
Queues could work if you create a single element queue but you would always need to use Preview Queue rather than Dequeue in order to maintain the value in there.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Add new fields incu stomer data tab ( transaction BP)

Hello,
I need to add three new fields in the standard transaction BP. I need the three new fields show in the customer data tab when you have introduced a determinated value in control tab before.
Is it possible?
Can you tell me the way?
Thanks

Hello,
I was changing the customer fields of transaction BP with transaction eewb.
I was working in a specific project (ZBUPA) as you can see in the following images. I don´t know what I've changed but now the icon of the enhancement of the project is like a red broken box (Errors occurred if you look for it at the legend), and the task has got a prohibit icon (Processed with Errors). Like this:
[[IMG]http://img329.imageshack.us/img329/6627/errorpp1.th.jpg]http://img329.imageshack.us/my.php?image=errorpp1.jpg][IMG]http://img329.imageshack.us/img329/6627/errorpp1.th.jpg | http://img329.imageshack.us/my.php?image=errorpp1.jpg]
I am very interested in recover the system to the initial state of the screen, like this image shows.
[[IMG]http://img329.imageshack.us/img329/3763/okzv3.th.jpg]http://img329.imageshack.us/my.php?image=okzv3.jpg][IMG]http://img329.imageshack.us/img329/3763/okzv3.th.jpg | http://img329.imageshack.us/my.php?image=okzv3.jpg]
Thanx!

How to replace existing fields in Addnl Data Tab in CV01N Transaction

Hi DMS Experts,
In cv01n transaction,
In Addnl Data Tab presently having following fields which i needs to be changed.
Addnl Data Tab:
Inbound Material Safety Data Sheet
MSDS Supplier
Product Number
Country
Dok-X Document Type
Dok-X Document Status
Dok-X Document Version
Dok-X Version Date
Above mentioned fields i have to change for Example i to maintain, Project Name, Responsible person name etc.
how i can do that.
Pls guide me step by step config steps
This i need very urgently.
Thanks in Advance.
Regards
Sandeep

Hi,
the additional data tab is controlled by means of classes created in DMS.
if your requirement is something like,
project name
responsible person name etc..
for this - in CL01, you can create class, say Project XYZ
in CT04 - you can create characteristics as project name and person name..etc for this class.
in each characteristics you can maintain the values which will serve the requirement.
hope this helps U..!
Thank You,
Manoj
award points if useful..!

No Data displayed in overview tab under Transaction Data in Support Messsag

Dear All
In support desk I am raising a message as a message creator from a satellite system
Then as an administrator i assign the call to the processor
At this stage when i change from Fast entry mode to Transaction Data i can see the details and communication under Overview tab.
Now When i log in as a processor or end user and see in my messages and open the message which is raised for solution
i cannot see any thing under Overview tab.
Overview tab is coming blank for same message raised.
Please help is there any component or role to be activated or given to processor and end user for seeing the details under Overview tab.
Thanks
Vishrut Shah

Hi Shah,
Please check the link below, it may help you for assigning authorizations:
http://help.sap.com/saphelp_sm32/helpdata/en/45/cb27429d16db2ce10000000a1550b0/content.htm
Check http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50557bd9-6b6f-2a10-259d-b0cdc6b121c6?quicklink=index&overridelayout=true and search the authorization part .
Regards,
Nibu Antony

Enhancement in the Master data Tab in the BP transaction

Dear all,I need to create news fileds in the Master data tab in the BP transaction. This fields are not imput fields but the content of this fields are customer specifics number which will be generated when creating a BP. This numebr will be generated in the BUT000 Table in the BP number field.
My Question is : How can i create New Fields in the Master Data Tab, is it possible to use the EEWB for that or not ?
thanks in advance for ur help.
liliane

Hi liliane,
You can use eewb however it should be used very cautiously as once changes are made there are tables and attributes that are created correspondingly. I mean activities like Bdoc creation for the fields added happen simultaneously and you may not be able to revert changes.
Thanks,
vivek

System Details in SAP ATTRIBUTES Tab under TRANSACTION DATA

How to fetch the System Details in SAP ATTRIBUTES Tab under TRANSACTION DATA ? In CRM_DNO_MONITOR Transaction

Hi,
Create IBASE and COMPONENTS in IB51 Txn for the systems you are using.
Fill in the particular IBASE COMPONENT on which message is raised on the IBASE & COMPONENT field in CRMD_ORDER Txn.
It will automatically fetch all the details under SAP ATTRIBUTES Tab.
http://help.sap.com/saphelp_sm40/helpdata/EN/75/4b730b1c628c459ef868acd48197ec/frameset.htm
Thx,
Waseem

Problem while data processing TRANSACTION data from DSO to CUBE

Hi Guru's,
we are facing problem while data processing TRANSACTION data from DSO to CUBE. data packets processing very slowly and updating .Please help me regarding this.
Thanks and regards,
Sridhar

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (give BIrequest name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.
You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the cube.
Thanks,
JituK

Error while activating Transactional data source

I am facing the below error while activating the transactional data source.
Field Revenue ( Position 7 ): Amount Field in Internal Format, Check Settings.
Can nyone plz let me know.

Hi Reddy,
You might have created the Revenue field Currency as "Fixed Currency" like INR or USD.
In the Datasouce Def - Fields tab you have Internal format for a field then you should have the reference field to specify the external format like 0currency.
In your case you have not taken any reference field 0currency. So you should n't specify the revenue field in Internal format,
As Shashank said, Please change it to External format and Activate the DS.
Thanks
Sreekanth.

Error while loading Transactional data from NW BW Infoprovider

Hi,
I am trying to load the transactional data using the delivered "Transactional data from NW BW Infoprovider" package and getting error message Error occurs when loading transaction data from other cube .
Below is the transformation file content
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=NO
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 9999999999999
ROUNDAMOUNT=
*MAPPING
ACCOUNT = 0ACCOUNT
BUSINESSTYPE = *NEWCOL(NOBTYPE)
BWSRC = *NEWCOL(R3)
COMPANYCODE = 0COMP_CODE
DATASRC = *NEWCOL(R3)
FUNCTIONALAREA = *IF(0FUNC_AREA = *STR() then *STR(NOFA);0FUNC_AREA)
GAME = *NEWCOL(NOGAME)
INPUTCURRENCY = *IF(0CURRENCY = *STR() then *STR(NOCURR) ; 0CURRENCY)
PROBABILITY = *NEWCOL(NOPROB)
PRODUCT = *NEWCOL(NOPROD)
PROFITCENTER = 0PROFIT_CTR
PROJECT = *NEWCOL(NOPROJECT)
TIME = 0FISCPER
VERSION = *NEWCOL(REV0)
WEEKS = *NEWCOL(NOWEEK)
SIGNEDDATA= 0AMOUNT
*CONVERSION
Below is the Error Log
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide=ZPCA_C01
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\R3_TD_P&L.xls
CLEARDATA= Yes
RUNLOGIC= No
CHECKLCK= Yes
[Messages]
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other cube
Application: ACTUALREPORTING Package status: ERROR
Does anyone had this issue before or is there something that needs to be looked in the BW delivered task ?
ANy Inpout will be appreciated.
Sanjay

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

Error While importing the transaction data

All SAP BPC Gurus,
I need your help in resolving this error, I have encountered this below error while uploading (importing) the transaction data of (Non-Reporting) application, Would you please help me resolving this error. I don't know if i'm doing anything wrong or is anything wrong with the setup.
I used DataManager in EXCEL BPC and Ran the IMPORT Transaction Package.
/CPMB/MODIFY completed in 0 seconds
/CPMB/CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
FILE= DATAMANAGER\DATAFILES\IFP_BPCUSER121\rate data file.csv
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\SYSTEM FILES\IMPORT.XLS
CLEARDATA= No
RUNLOGIC= No
CHECKLCK= No
[Messages]
Task name CONVERT:
XML file (...ANAGER\TRANSFORMATIONFILES\SYSTEM FILES\IMPORT.TDM) is empty or is not found
Cannot find document/directory
Application: PLANNING Package status: ERROR

are you using the standard "Import" data package?
Check the code in the Advanced tab of the Import data package
Check your Transformation file is in correct format.
code in Advaced tab should be as below:
PROMPT(INFILES,,"Import file:",)
PROMPT(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
PROMPT(RADIOBUTTON,%CLEARDATA%,"Select the method for importing the data from the source file to the destination database",0,{"Merge data values (Imports all records, leaving all remaining records in the destination intact)","Replace && clear datavalues (Clears the data values for any existing records that mirror each entity/category/time combination defined in the source, then imports the source records)"},{"0","1"})
PROMPT(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after importing",1,{"Yes","No"},{"1","0"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
TASK(/CPMB/CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
TASK(/CPMB/CONVERT,SUSER,%USER%)
TASK(/CPMB/CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CONVERT,SAPP,%APP%)
TASK(/CPMB/CONVERT,FILE,%FILE%)
TASK(/CPMB/CONVERT,CLEARDATA,%CLEARDATA%)
TASK(/CPMB/LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/LOAD,RUNLOGIC,%RUNLOGIC%)
TASK(/CPMB/LOAD,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/LOAD,CLEARDATA,%CLEARDATA%)

Validity end date tab is suppressed in scheduling agreement

Hi ,
In scheduling agreement , Validity end date tab is suppressed ,
There is no layout is assigned to the doc type & standart transaction varient is acitve , but while doing ME31L above field is not coming ( it is in suppressed / hide mode )
Please let me how to get that validity date tab in scheduling agreement.
Thanks,
Pradeep

Hi,
Go to SPRO > IMG > MM > Purchasing > Purchase Order > Define Screen Layout > NBF > Administrative data, header > make the fiels Validity Period field optional / Required.
Hope this will help you.
Regards,
Manish Jain

Mandatory field in sales order additional data tab

Hi,
I have added an extra field in additional data tab of sales order.
How can i make this field as mandatory for certain sales organisations ?
TIA

since it's conditional, I think I would add code in SAVE_DOCUMENT_PREPARE subroutine in MV45AFZZ, based on transaction code, prior values (YVBAP) and current values (XVBAP), and issue an error message, allowing user to return to the screens displaying Item table control, when the field is not properly populated.

Issue in Datasource creation Transaction data

Hi,
While creating the Datasource for the Transaction Data , we have info objects custom defined with length NUMC & length4 , but when in the proposal tab when saying the Load example data the data type and length are changing to INT2 and 5 like wise in fields tab also
why is this happening. Pls help.
Regards,
Sruthi

Hi Sruthi,
This is normal when you create data sources. The system generally looks at the field values and decides its data type and length.
If you do not want this data type and length to be taken, what you can do is go to the fields tab, there it will prompt you with a message 'Copy fields from propsal' or someting like this, you click on 'No'. Instead in the fields tab you will find a column Info object, just write the technical name of the info object and press enter. This will take the data type and lenght of your info object.
Hope this helps.
thanks,
rahul

Problem in Flat file transaction data loading to BI7

Hi Experts,
I am new to BI7, got problem in activating data source for transaction data and create transfer routine to calculate sales revenue which is not there in flat file but flat file has got price per unit and quantity sold.
Flat file fields are:
Cust id SrepID Mat ID Price per unit Unit measure Quantity TR. Date
cu100 dr01 mat01 50 CS 5 19991001
created info objects are
IO_CUID
IO_SRID
IO_MATID
IO_PRC
IO_QTY
IO_REV
0CALDAY
When i created IO_QTY, unit/curency was given as 0UNIT. In creation of DS, under fields tab, extra field CS was shown I did confuse to which object should i map it. and at the same time when i enter IO_QTY its prompting one dailogbox with 0UNIT, so i said ok. Now i can't map CS to unit as system created automatic ally 0UNIT when i enter IO_QTY. Could you please give me solution for this and procedure to enter formulae for calculating Sales revenue at this level instead of query level. Your solutions will be more appreciated with points.
Await for ur solutions
Thanks
Shrinu

Hi Sunil,
Thanks for your quick response. I tried to assign the infoobjects under the fields tab in creation of DS. I have not reached to data target yet.
Could you please answer to my total question.
Will you be able to send some screen shots to my email id [email protected]
Thanks
Shri

Transaction Data Tab

Similar Messages

Maybe you are looking for