TRANSACTION EEWB

Hi Gurus,
I was using the transaction EEWB, but when i tried to start wizard the following error message occourred:
BDT-DC is Not Prepared for This Application Object.
Anybody have never seen this message? Do you now what that mean?
Thanks,
Barbara.

Hi Barbara,
The below links should help you.
EEWB with Object Type BUPA and enhancement type ADD_NEW_FIELDS
Re: BDT-DC is not prepared for this application object
Regards
Nidhi

Similar Messages

SAP CRM 6.0 UI transaction EEWB extension type ADD_NEW_ATTRIBUTES_TABLE

I need help on the following two issues.
ADD_NEW_ATTRIBUTES_TABLE
When doing an enhancement to the case management EEW Business Object: CRM_CASE the extension type ADD_NEW_ATTRIBUTES_TABLE is not available, why?
Search help
In CRM 6.0 UI how can one create a Search Help that depends on a value of another field. E.g When you have category field and A is select, the dropdown of the next field must only contain values belonging to only category A.
Thanks

Hi,
I suggest you close this thread and post it in the CRM 2007 forum instead. You are in the PCUI forum. I assume you are using Web UI in CRM 6.0.
Regarding you second question it should be possible to make a dropdown logic as described by implementing the GET_V method of the relevant field. This is done in the component workbench.
/Anders

EEWB: Change tab tittle when creating an extension type ACTIVITY_H

Hi CRM Gurus,
I am using transaction EEWB to extend the object BUSINESS_ACTIVITY. There are two extension types: CUSTOMER_H and ACTIVITY_H. Both of them create an additional tab that contains the new fields. I have two questions about this:
1.- Which differences exist between them?? When must be
    used one and when the other? Can I use both at the
    same time?
2.- With the method CRM_CUSTOMER_H_SET_TITLE of
    the Badi definition CRM_CUSTOMER_H_BADI, you can
    change the tittle of the additional tab when using
    CUSTOMER_H extension type. But when you are using
    ACTIVITY_H extension type, instead
    CRM_CUSTOMER_H_BADI the system triggers
    CRM_ACTIVITY_H_BADI, and that Badi doesn´t have any
    method to change the tab tittle. Anybody knows how
    to change the tittle tab in this case???
Any suggestion will be of great aid.
Thanks in advance.
Rosa

Carlos,
The difference between ACTIVITY_H and CUSTOMER_H is very simple:
CUSTOMER_H is an SAP delivered segment of the business transaction to contain CUSTOMER defined Header fields for the business transaction.
ACTIVITY_H is an SAP delivered segment of the business transaction designed to hold data specific to business transactions that have a business object type of "Activity"
It is possible to use both at the same time. The normal practice is to use CUSTOMER_H for any new customer fields.
The reason why you don't have a BADI method to change the title of the fields on the tab that corresponds to ACTIVITY_H is that the CUSTOMER_H badi is designed to help "build a tab from the ground up". In other words the ACTIVITY_H is used to help reflect new behavior in that segment, while CUSTOMER_H badi is used to define how that segment will behave.
The simple solution is to use CUSTOMER_H. I really have never seen a valid reason to enhance the other segments of the business transaction header.
Let me know if you need additional clarification,
Stephen

Error while adding custom fields using EEWB.

Hi
While trying to add custom fields using the transaction EEWB i got an error message
'No Logsys040 transport request exists for system workbench.Please let me know why it happens.
Thanks
sureshpaul

closing this unresolved

How to add new fields for FB01 transaction both at Header and Line item

Hi Guys,
I would like to add the new fields at header and item level in FB01 transaction. Can I acheive this by using transaction EEWB....please help me on this.
Thanking you

Hi,
We are trying to copy a work flow objects from ECC6.0 to 4.6C...where we found the following Select statement.
*Determine Top WorkItem Instance
if im_top_wi_id is initial.
   select wi_id top_wi_id wi_rh_task into lw_top_id from sww_wi2obj
     up to 1 rows
     where wi_rh_task = im_wftask and
           catid      = 'BO'      and
           instid     = l_instid and
           typeid     = 'FIPP'.
   endselect.
   endif
As table sww_wi2obj can't be found in 4.6C, can any one help how to replace or implement the same logic as above statements.
Thank you....

Question related to EEWB

Dear Experts,
We have extended the Service Contract Transaction by using the Easy Enhancement Workbench (EEWB). As the result of the generation, we can view our custom fields in a "Custom Fields" tab in the Service Contract.
We'd like to display those custom fields in a new tab, called "Security Deposit". We did the settings to make them available in he corresponding PC-UI Application (CRMD_BUS2000112). But at the end of this process, no new tab has been created in the service contract and
our custom fields are still displayed in the "Custom Fields" tab.
Below are the settings details to make our custom fields available in the new tab at the service contract level:
1. We have extended our service contract using the easy enhancement Workbench.
2. We wanted to add a new tab to the application, named Security deposit, which will contain the additional fields. This new tab should be located at the Service Contract level.
=> 2.a. Create 2 new field groups
=> 2.b. Add to ZSDELEC_DETAILS our newly created fields
=> 2.c. Add to ZSDELEC the previously created field group and as group type select Screen Group
=> 2.d. Create a new event
=> 2.e. Define application layout
=> 2.f. Create a new tab event
The only thing we didn't manage to get working (as mentionned in the Tiest van Gool Blog) is to generate the layout for ZSDELEC and ZSDELEC_DETAILS. The following errors occured:
No field group was selected in the blueprint table
ZSDELEC is not defined in the DDIC
Any ideas?
Thanks in advance for your help,
Best regards,
Stephanie

Dear experts
My issue has not been solved yet. I've created an OSS message and I'm not sure to understand their answer.
(My issue is: i cannot create a new at the CRM service contract level for custom fields created through EEWB).
SAP answer: As you are probably aware transaction EEWB is only valid for creating your own fields, it cannot create customer tabs. Instead, the new fields and new tables are generated into the same tabs until the tabstrip is "full". It cannot generate the layout on morethat one tab. Creating a second tab, maintaining it in the screen sequence control, mapping the data fields etc. has to be done manually for a different tab, the EEW cannot help in this case.
I have checked the method described by you but this is specific to PC-UI but you mention that the tab is not available in CRMD_ORDER or in CIC0. To have your own tab maintained there, you will to use the BADI CRM_CUSTOMER_H_BADI as mentioned previously. This allows you to add your own tab at header and item level.
Does it mean that the method described by Tiest Van Gool (/people/tiest.vangool/blog/2005/07/24/pc-ui-and-easy-enhancement-workbench-eew-integration) is not applicable if I use CIC winclient and CRMD_ORDER?
Thanks a lot for your answers,
Stephanie

Add new fields incu stomer data tab ( transaction BP)

Hello,
I need to add three new fields in the standard transaction BP. I need the three new fields show in the customer data tab when you have introduced a determinated value in control tab before.
Is it possible?
Can you tell me the way?
Thanks

Hello,
I was changing the customer fields of transaction BP with transaction eewb.
I was working in a specific project (ZBUPA) as you can see in the following images. I don´t know what I've changed but now the icon of the enhancement of the project is like a red broken box (Errors occurred if you look for it at the legend), and the task has got a prohibit icon (Processed with Errors). Like this:
[[IMG]http://img329.imageshack.us/img329/6627/errorpp1.th.jpg]http://img329.imageshack.us/my.php?image=errorpp1.jpg][IMG]http://img329.imageshack.us/img329/6627/errorpp1.th.jpg | http://img329.imageshack.us/my.php?image=errorpp1.jpg]
I am very interested in recover the system to the initial state of the screen, like this image shows.
[[IMG]http://img329.imageshack.us/img329/3763/okzv3.th.jpg]http://img329.imageshack.us/my.php?image=okzv3.jpg][IMG]http://img329.imageshack.us/img329/3763/okzv3.th.jpg | http://img329.imageshack.us/my.php?image=okzv3.jpg]
Thanx!

Adding New Fields to Customer Complaint Transaction

after creating the fields in the wizard of transaction EEWB , its showing the following error "System Type OLTP with Role DEV is not specified correctly"
please guide me

Hi Shashi,
The error you have mentioned says System type is OLTP, change it to CRM system. Just delete the existing entry and create a new one rather than changing it.
Also check whether you have entered the correct logical system.
Regards,
Karthik.
Message was edited by: karthik kuppuswamy

Need guidance for using EEWB

Hi Friends,
I have created a project in transaction EEWB.
Then i have created an extension, in the extension i have given following details
1. Business Object : BUPA.
2. Extension Type : ADD_NEW_FIELDS.
Then i had started wizard , maintained some fields as per the requirements and completed the processes.
Now i can see the TASK where in I can see the details of the newly created DDIC objects.
Is there anything else i am supposed to do apart from these steps to view newly created fields?
Please help me.
Reward points guaranteed

Sohit
 Have you saved the Projects and Extension on the Transport Request ?
 Also try to re-generating the same !
 <a href="http://help.sap.com/saphelp_crm50/helpdata/en/81/1d5303c023da438e792316c9d25a84/frameset.htm">Post Processing</a> needs to be done
Thanks
Allot points if this helps !

Business Transaction Screen Configuration

How can I hide / delete extra tabs from Transaction screen....can guru's help me in this topic..
Thanks in Advance.

Hi,
You can use Easy Enhancement Work Bench (EEWB).
Easy Enhancement Work Bench - SAPs tool enables to add custom fields to standard transactions without having to modify SAP code. In a nutshell, the way this works is that SAP allows generating custom objects in predefined containers that are linked to the various transactions.
Transaction EEWB (Easy Enhancement work bench) is used to create the custom Fields in the Custom (new additional custom) Tab for SAP Business Objects. Thus the standard SAP CRM Transactions can be extended using the Easy Enhancement Workbench (EEWB), i.e., an extra tab is added to the View - Transaction Data in CRM Transaction.
During the creation of the project in EEWB, a workbench as well as customizing request is defined. After the creation of project, extension(s) are created. The extension contains the information regarding the business object to be modified and the type of the extension.
Note: In order to extend CRMs generic business transactions, e.g. orders and opportunities, select object Business Transaction and type Add New Fields. For business partner extensions select object BUPA, type Add New Fields.
EEWB uses customizing include (CI) provided by SAP to make extensions easy. These customizing includes are included in the People Centric UI and relevant database tables (For instance CRMD_CUSTOMER_H and BUT000 if Business Transactions - Sales & Service Objects and Business Partner are extended respectively).
The Z Fields added using the Transaction EEWB are appended to the table CRMD_CUSTOMER_H and the entry in the table CRMD_CUSTOMER_H corresponds to one respective entry in the table CRMD_ORDERADM_H with HEADER_GUID.
(Relation between two tables: CRMD_ORDERADM_H-GUID = CRMD_CUSTOMER_H-GUID.
Reward if it helps.
Rashit

Undo EEWB changes

Hi there,
I'm currently playing around with the EEWB to get an idea about how it works. Now I'd like to undo some of the changes I made.
Is ther a proper way to do so, or do I have to delete just all generated coding that is listed in the log files of the transaction eewb?
Thanks,
Thea

If you haven't released the eewb projects you can modify the rpoject and remove the fields from there. With the next generation the fields should disappear. I say 'should' because the eewb does not do an excellent job in removing fields, and it could well be that you need to open an OSS message in order to get the system back to a consistent state after the deletion fo generated projects.
Deletion of the objects generated will also work, but this will delete only the extension, not the definition of the extension. So when generating the next time you will still refer to the old metainformation which will result in unwanted objects.
Regards, Kai

Customer fields replication in Sales order from R/3 to CRM

Hi all,
I want to replicate, for Sales orders, one field (ZFIELD_A) on item level (VBAP) from R/3 to CRM .
I used transaction EEWB on CRM with the option "Adding new fields to Business transactions" and I flagged checkbox "Also used in R/3".
All worked fine and all the repository objects where created both in CRM and R/3, and the fileds was appended in structure CUSTOMER_I (CRM).
The problem is when I replicate the data, because of existing customer fields in R/3.
In R/3 I have exisiting fields on BAPE_VBAP
ZFIELD_1 [CHAR1] - existing
ZFIELD_2 (CHAR1] - existing
ZFIELD_A [CHAR30] (the new one)
Assuming the above field values are X-Y-thisisatest
the value of ZFIELD_A in CRM will be "XYthisisatest", since R/3 sends, in structure BAPIPAREX all the three Customer fields.
In the generated (from EEWB) method ZEEW_DATAEXCHANGE01->CRM_DATAEXCH_R3D_MBDOC_FILL, called when transferring the order to CRM , all the first 30 positions are moved to ZFIELD_A from CRM.
A solution would be to change the generated coding of the above method, by truncating the first 2 chars, but it's not so nice (and I also could loose the changes after a generation of the EEWB project).
Anyone has a nicer idea?
thanks a lot,
Fabrizio

Hi
Go through the following NOTEs
736595,833585,863611,873771.
Regards
Nadh.

Issue while creating a field at header level in CRM 4.0

Hi,
Using transaction EEWB, I tried to add a custom field at the header level to an existing Project. The Project already had an extension created to which I made the modifications i.e. added the field at header level. But, when I tried to generate the changes, I got the following two errors : 1. No task for editing objects can be determined and 2. Creating of BAdi Implementation failed.
Now, when I try to revert back the changes I am not allowed to do so. Please help me as I am new to CRM. Thanks a lot in advance.

Hi,
if ur still not able to do that
goto EEWB
Enter the Project Name
Right click on the Enhancement---->Select back to previous version.
Please Reward Points & Mark Helpful Answers
To mark Helpful Answers ;click radio Button next to the post.
RadioButtons
o Helpful Answer
o Very helpful Answer
o Problem Solved.
Click any of the above button next to the post; as per the anwers
To close the thread; Click Probelm solved Radio Button next to the post , which u feel is best possible answers

ABAP dump Error while creating service order in PCUI.

Hi Experts,
                 We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors         RAISE_EXCEPTION
Date and Time          02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
|    function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj Patil

Hi Thirumala,
Thnaks for the reply.
            I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil

Replicate CRM z-fields of BP to ECC

Hi experts,
We're having a requirement of adding z-fields in CRM BP (for delivering plants in ECC) and transferring these fields to ECC customer master data (KNVV).
Can anybody who have achieved this before provide a suggestion?
Thanks
Shane

Hi Shane,
You can do this using EEWB (Easy Enhancement Workbench). Transaction EEWB.
Select the Object CUSTOMER_I and enhance the same as per your requirement.
Regards,
Kris.

TRANSACTION EEWB

Similar Messages

Maybe you are looking for