Transaction ending prematurely

          I am having trouble with a custom XAResource that I have written. In a bean managed
          transaction, I am registering and enlisting an XAResource obtained from an Oracle
          XA connection as well as my custom XAResource. I first do some work on the Oracle
          resource. However, when I start to do some work on my custom XAResource, the transaction
          manager suddenly sends it an end() message with flags=TMSUSPEND. Does anyone know
          why the transaction manager might be doing this? Below is my application log showing
          the sequence of events:
          - usertx.begin()
          - tm.registerDynamicResource(XA_RESOURCE_NAME, oracleXAResource): oracle.jdbc.xa.client.OracleXAResource@5bdf42
          - tm.registerDynamicResource(myResourceName, myResource)
          - tx.enlistResource(oracleXAResource)
          - tx.enlistResource(myResource)
          - Do some work on oracleXAResource
          - Try to do some work on myResource
          - myResource.end with flags=TMSUSPEND

          Okay, I think I am understanding the problem better, but I don't have a solution
          yet. The transaction mamager is sending an XAResource.end(TMSUSPEND) followed
          by a XAResource.end(TMSUCCESS) which is giving an XAER_RMERR from Oracle. This
          is exactly the bug described in Weblogic JTA manual (oracle bug #1527725). The
          manual also says that "WebLogic Server has provided an internal workaround for
          this bug." - however I am not seeing the behavior expected from this workaround!
          Can anyone help please? I am attaching my server log with JTA debug messages.
          Thanks.
          [OssServer.log]

Similar Messages

Installation ended prematurely because of an error.

Hi There,
could need a bit of insight. I am trying to update my XI 3.1 installl with SP2.3. SP2 installed ok but installing FP1, 2, or 3 fails with the error message in the subject line.
Sometimes the install does not even start. After running the exe it unpacks everything and then the Language selection pops up and after that nothing more.
Any idea how I can get that to work? I had no issues with the CR FPs.
Thanks,
Stephan

i've found [a resolution related to a different product|http://forum.ventrilo.com/showpost.php?p=134644&postcount=36| Vista x64 Ultimate - Installation ended prematurely because of an error], where the poster reported the exact same "Installation ended prematurely because of an error" dialog and event id!
from a command line, i ran:
+d:\downloads\tempro_setup_dir\TEMPRO_3.3.3.exe /passive+
and that installed tempro "silently". to quote [the thread where i found the resolution|http://forum.ventrilo.com/showpost.php?p=134644&postcount=36| Vista x64 Ultimate - Installation ended prematurely because of an error]:
{quote:title=Countdmoney wrote:}{quote}
> This will run the installation without the dialog boxes of the installer being displayed. Of course you will be accepting all the defaults, but the 64-bit version installs in the "Program Files" directory.
phew! finally i can now resume all those annoying alerts ;)

Every transaction ends in abap debugger

hi experts,
recently i have installed netwaver 7.0 sneak preview on my system until now it was working fine
bit today when i activate transformation,dtp,infopackage... anything transaction ends in abap debugger
in program GENERATOR object reference METRSDS cant find any dump or trace in st22 or st11.
please help me out.
sanjeev

Hi Sanjeev,
As you said you have newly installed BI 7.0 have you run the SGEN?
SGEN is transaction which compiles all transactions and buffere them in memory. So that when every you run any transaction it does not take much time.
After installing any SAP system running SGEN is mandartory. Generally SGEN takes 6-7 hours to complete.
Regards,
Ajinkya

Slideshows ends prematurely in the middle of a transition?

I have eight slides in a project so far and for some reason the slideshow ends prematurely in the middle of the transition from the sixth slide. any ideas? TIA jim

Hi larryjo:
You need to highlight the clip by clicking on it, then go to Edit / Split Video Clip. You will see a line where the clip has been split.
Then drag your transition to that split line. It will work then.
Might want to download these for some help...
http://manuals.info.apple.com/en/iMovieAtAGlance.pdf
http://manuals.info.apple.com/en/iMovieLesson1.pdf
http://manuals.info.apple.com/en/iMovieLesson2.pdf
http://manuals.info.apple.com/en/iMovieLesson3.pdf
http://manuals.info.apple.com/en/iMovieLesson4.pdf
http://manuals.info.apple.com/en/iMovieLesson5.pdf
http://manuals.info.apple.com/en/iMovieLesson6.pdf
http://manuals.info.apple.com/en/iMovieLesson7.pdf
Sue

FIM Service and Portal Installation Ends Prematurely

Hello All,
I'm in the process of setting up a new production FIM 2010 R2 server. I have already installed the FIM synchronization service and I was able to install this successfully.
I have already installed SharePoint services (WSS 3.0) and configured it for FIM. But when I try to install the FIM Service and Portal.
I keep getting and error that says " FIM Service and Portal Installation Ends Prematurely" with no other details. If anybody has any advice please let me know.
I have already installed everything on a stand alone box in a dev environment and it all works correctly however I am unable to now install in a production environment

Cameron is right - you should consider FIMService account nearly as normal AD account for user*
An installer account should be admin on the box, where you are installing FIMService and he should be sysadmin on SQL during installation of FIMService. An installer account should be other than FIMService account itself.
*FIMService account:
Lock down the Service Account
The service account should not be used by any other services or users. The account must not be used to logon interactively and requires no access to any additional resources beyond those granted during setup. The service account is used to provide the security
context for the MIIS service as it accesses resources on the MIIS server and the associated database. It also provides the security context for the execution of any rules extensions.
Lock down the service account to ensure no malicious user is able to sign in using its credentials and gain access to MIIS data. Configure Group Policies to lock down the account and restrict access to this account. Since the MIIS service only needs the account
to run as a service, restrict the account as follows:
Deny logon as a batch job.
Deny logon locally.
Deny logon through Terminal Services.
Deny access to this computer from the network.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.
Good topic for a Wiki article:
http://social.technet.microsoft.com/wiki/contents/articles/23330.technet-guru-contributions-for-march.aspx
Thanks Dominic and Jose!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Why Tempro 3.3.3 "Installation ended prematurely because of an error"?

hello forum,
i have a Satellite L500-1XD running windows 7 64 bit. i _had_ tempro 3.0 preinstalled from when i first bought the satellite in mar '10. for months, i ignored tempro's demands to update to tempro 3.3.3; until today. so, i downloaded it from [here|http://eu.computers.toshiba-europe.com/tempro/ToshibaW7TEMPRO.zip|http://eu.computers.toshiba-europe.com/innovation/generic/TEMPRO_W7_RELEASE/].
when i ran the TEMPRO_3.3.3.exe file, i got the "Welcome to Toshiba TEMPRO Installation Wizard" window as expected. but then when i clicked the "Next" button, all i got was a "Fatal error" dialog that said "Installation ended prematurely because of an error".
I searched this forum for a solution and i found [this thread|http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=167329|Satellite P100 fails to instal TEMPRO 2.0.3] that advised the original poster to uninstall the previous version. so, that's what *i* did. i uninstalled the working version 3.0 of Tempro that came preinstalled. but when i tried to install 3.3.3 again, i got the same "Installation ended prematurely because of an error"! now, i don't have tempro at all!
please, can anybody help with advice on what to do to get this thing successfully installed? i found a related entry in the windows 7 event viewer (see below) if that's of any use.
thanks in advance for your help.
=================================
Event Properties
General Tab
Windows Installer installed the product. Product Name: Toshiba TEMPRO. Product Version: 3.33. Product Language: 1033. Manufacturer: Toshiba Europe GmbH. Installation success or error status: 1603.
=================================
Event Properties
Details Tab
- System
- Provider
[ Name] MsiInstaller
- EventID 1033
[ Qualifiers] 0
Level 4
Task 0
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2010-10-29T23:25:17.000000000Z
EventRecordID 67671
Channel Application
Computer ********
- Security
[ UserID] S-1-5-21-3117272653-2424292012-3940679202-1001
================================================== ==========
- EventData
Toshiba TEMPRO
3.33
1033
1603
Toshiba Europe GmbH
(NULL)
7B44424237303231412D333433372D343436462D414345352D 3732363136343441393732437D303030303135663933366262 66613039636634636236336531616535393861636632316330 30303030393034
Binary data:
In Words
0000: 4242447B 31323037 34332D41 342D3733
0008: 2D463634 35454341 3632372D 34343631
0010: 32373941 30307D43 35313030 36333966
0018: 61666262 66633930 36626334 61316533
0020: 38393565 32666361 30306331 39303030
0028: 3430
In Bytes
0000: 7B 44 42 42 37 30 32 31 {DBB7021
0008: 41 2D 33 34 33 37 2D 34 A-3437-4
0010: 34 36 46 2D 41 43 45 35 46F-ACE5
0018: 2D 37 32 36 31 36 34 34 -7261644
0020: 41 39 37 32 43 7D 30 30 A972C}00
0028: 30 30 31 35 66 39 33 36 0015f936
0030: 62 62 66 61 30 39 63 66 bbfa09cf
0038: 34 63 62 36 33 65 31 61 4cb63e1a
0040: 65 35 39 38 61 63 66 32 e598acf2
0048: 31 63 30 30 30 30 30 39 1c000009
0050: 30 34 04

i've found [a resolution related to a different product|http://forum.ventrilo.com/showpost.php?p=134644&postcount=36| Vista x64 Ultimate - Installation ended prematurely because of an error], where the poster reported the exact same "Installation ended prematurely because of an error" dialog and event id!
from a command line, i ran:
+d:\downloads\tempro_setup_dir\TEMPRO_3.3.3.exe /passive+
and that installed tempro "silently". to quote [the thread where i found the resolution|http://forum.ventrilo.com/showpost.php?p=134644&postcount=36| Vista x64 Ultimate - Installation ended prematurely because of an error]:
{quote:title=Countdmoney wrote:}{quote}
> This will run the installation without the dialog boxes of the installer being displayed. Of course you will be accepting all the defaults, but the 64-bit version installs in the "Program Files" directory.
phew! finally i can now resume all those annoying alerts ;)

Error: Submit transaction ended

Hi,
I scheduled a program in the background.
the job got cancelled with erroe message "Submit transaction ended".
Please let us in know in what is the reason for this error
Regards
Suresh

Did you recently upgrade your APEX installation ? If so you might have missed updating the 'images' directory with the images from the upgraded APEX version .
Varad

Primavera p6 professional R8.2 setup wizard ended prematurely because of an error.

i want to install primavera p6 professional R8.2 in my machine after selecting standalone option i am getting following error.
"Primavera p6 professional R8.2 setup wizard ended prematurely because of an error.your system has not been modified"
can any one help on this.

Hi,
If the typical option is allowing the application to install, then i'd suggest just adding the database side of it manually.
The client application for PPM and EPPM in P6r8.2 and 8.3 is the same application (P6 Professional) and is 'smart' enough to enable/disable features depending on if it detects a PPM or EPPM database.
There should be an Oracle XE installation file in the download that you can install (personally I prefer SQL Server Express but you will need to enable Named Pipes and TCP/IP after it is installed).
I would recommend installing one of these, creating the database manually and then configure the install you have that is pointing to your EPPM database to also point to the PPM database you create after installing OracleXE/SQL Server Express.
Regards
Alex

Cd ends prematurely

Sometimes a CD will end prematurely on my ipod touch. It seems the time counter thinks it is further along than it should be, so it reaches 0.00 before the true end of the CD and cuts it off. If I go back and play the last few minutes of the CD it cues up properly and plays to the end. How do I prevent the premature cut off from occurring? I've down loaded the CD's into my computer and into iTunes then onto my ipod.

Hey cmir,
I found the following resource that may provide more information:
Songs in iTunes may not play back completely
http://support.apple.com/kb/TS4357
Occasionally, if a song purchased from the iTunes Store on a Mac or PC was not downloaded completely, the song may not play back fully. The song may abruptly stop during playback, and iTunes may start playing the next song in your library or playlist.
Resolution
If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
- Delete the purchased song that is exhibiting the problem from your iTunes library.
- Click on the Purchased link in the iTunes Store to view your previously purchased music.
- Download your previously purchased song from this list.
Once you have redownloaded the music, you'll want to replace what is on your device with the new music. I would advise you to uncheck the "Sync Music" checkbox, and apply the changes (so there is ultimately no music syncing to your iPod touch).
Once you have done that, recheck the "Sync Music" checkbox, and apply the changes once more. This will instruct iTunes to completely remove all music from your device, and then copy the files once more. If you have a large amount of music, this initial sync may take a while.
Thanks,
Matt M.

Correct duration longer than indicated - playback ends prematurely

I have some mp3 song tracks the durations for which are actually substantially longer than reported in iTunes (up to 20 or 30 percent longer). When I play one of these songs in iTunes, the song continues to play to the end after the displayed remaining time has reached zero, but on my iPod the song ends prematurely. Options don't let me specify an end point later then the displayed end point for playback. QuickTime Player gets the durations right. How might I repair the incorrect duration information in iTunes? Thanks.

For me the same used audion lame encoder and showed up in iTunes Library with very strange time settings.

VMM Agent Installation Issues (Was previously installed fine, now refuses to install (ends prematurely)

The VMM agent was installed on two Hyper-V host servers just fine (they were then removed temporarily from SCVMM), but trying to add the servers back into SCVMM it insisted the versions of the agents on the two hosts were unsupported (even though it
installed them) so it requested they were removed before retrying, after removing the agents it now refuses to install them and suggests installing them locally. Installing them on the local host manually just causes the installation to end prematurely.
The firewall is completely disabled
UAC is turned off
I have also tried running from elevated cmd using msiexec /I
Any ideas??

Hi,
Please refer below as it has some useful troubleshooting steps that might help you.
http://support.microsoft.com/kb/2742275
As you have tried from an elevated cmd, have you tried restarting Add Host job in VMM as the last step?
http://networkerslog.blogspot.com/2013/07/unable-to-add-hyper-v-host-due-to.html
You can use PowerShell to reassociate the Host.
http://blogs.technet.com/b/jonjor/archive/2013/02/15/managing-hyper-v-hosts-using-virtual-machine-manager-fails-with-error-0x8033803b.aspx
Let me know of any development.
Thanks,
Janaka
Janaka Rangama MCT MIEEE MBCS (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable.)

Songs ending prematurely

While on vacation I discovered that two of my songs didn't work on my iPod. When I try to play them, I hear the first second or so of the song, but then it immediately goes on to play the next one as if the song ended there. Both songs play fine on my computer; I tried deleting them from iTunes and my iPod then adding them back but somehow they still have the same problem. I had a similar problem treatable by that method on both my iPod and iTunes where songs end up to a minute prematurely, but this is different; it only affects the iPod and only the first few seconds play. Does anyone know what this could be?

I had to manually reprocess the songs in Audacity to fix some problem with the files and get it working.

Recording ends prematurely when application button is pressed

I am trying to record a tutorial for a software program which
plays audio files. When I click the Play button in the software
program, it triggers Captivate 2 to stop recording. I tried
changing the End recording button from End to NumLock but with no
success. The bottom line is I can't record the steps I want because
Captivate ends too soon. Any suggestions as to how to get around
this? Thanks

This question was posted twice. Presumably because of a forum
glitch. Please direct any responses to the original thread. You may
do so by
clicking
here.

Tell block ends prematurely

Hi,
I'm trying to use Image Events to scale an image within an AppleScript I wrote. As a stand alone app, using only Image Events (IE), copying the script from one of the examples, all works fine. When I put that example script into mine as a subroutine, it doesn't work. The tell block that it's in ends, and the finder takes over.
my callling routine:
... setup stuff
tell application "Finder"
if not (exists folder "image gallery" of base_folder) then make new folder at base_folder with properties {name:"image gallery"}
set the_files to every file of base_folder
repeat with each_file in the_files
if the name extension of each_file is "jpg" then
my scaleImage800(duplicate each_file to (folder "image gallery" of folder base_folder))
end if
end repeat
end tell
my subroutine:
on scaleImage800(the_file)
try
tell application "Image Events"
launch
-- open the image file
set this_image to open the_file
-- perform action
scale this_image to size 800
-- save the changes
save this_image with icon
-- purge the open image data
close this_image
end tell
on error msg
display dialog msg
end try
end scaleImage600
and the results:
end tell
tell application "Image Events"
launch
current application
------ here's the problem
end tell
tell application "Finder"
------ where does this come from?
open document file "Fishing.jpg" of folder "image gallery" of folder "rmearns" of folder "Submitted Images" of folder "Camera Roch site template" of folder "IE downloads" of folder "Downloads" of folder "benbarlo" of folder "Users" of startup disk
end tell
tell current application
display dialog "The variable this_image is not defined."
"User canceled."
For some reason, the "tell application "Image Events"" statement doesn't "hold". AS does an "end tell" and "tell application "finder"" on its own right after, which causes the "open" statement to be executed by finder, not IE.
What's happening?
Thanks,
Ben
macbook 13, DP Quicksilver Mac OS X (10.4.9) Macbook 512MB, QS 1.5GB
macbook 13, DP Quicksilver Mac OS X (10.4.9) Macbook 512MB, QS 1.5GB
macbook 13, DP Quicksilver Mac OS X (10.4.9) Macbook 512MB, QS 1.5GB

property images_folder : "image gallery" -- User definded folder.
property originals_folder : "_originals" -- Location of duplicated files.
property processed_folder : "_processed" -- Location of resized files.
tell application "Finder" -- Required for 'path to', 'exists', 'every file of', and 'name extension' commands.
set base_folder to (path to desktop folder from user domain) as string -- Hardwired location of 'images_folder'.
if (exists folder (base_folder & images_folder)) then -- Determine if 'images_folder' exists. If so, continue ...
set the_files to every file of folder (base_folder & images_folder) -- Obtain full path of each file in 'images_folder'.
-- Determine if 'originals_folder' exists. If not, create it.
if (not (exists folder (base_folder & images_folder & ":" & originals_folder))) then make new folder at folder (base_folder & images_folder) with properties {name:originals_folder}
-- Determine if 'processed_folder' exists. If not, create it.
if (not (exists folder (base_folder & images_folder & ":" & processed_folder))) then make new folder at folder (base_folder & images_folder) with properties {name:processed_folder}
repeat with each_file in the_files -- Cycle throught the list of obtained files.
duplicate each_file to folder (base_folder & images_folder & ":" & originals_folder) with replacing -- Store a master copy, in 'originals_folder'.
if ((name extension of each_file) is "jpg") then my scaleImage800(each_file as string) -- Process only '.jpg' files.
move each_file to folder (base_folder & images_folder & ":" & processed_folder) with replacing -- Store the processed copy, in 'processed_folder'.
end repeat
else -- ... otherwise, create a new 'images_folder' at 'base_folder'.
make new folder at folder base_folder with properties {name:images_folder} -- Create new 'images_folder' folder.
display dialog "A new (empty) folder, titled '" & images_folder & "' has been created on the 'Desktop." buttons {"OK"} default button "OK"
end if
end tell
try -- Optional code.
tell application "Image Events" to quit -- Quit 'Image Events'.
end try
try -- Optional code.
tell application "Image Capture Extension" to quit -- Quit 'Image Capture Extension.
end try
on scaleImage800(the_file)
try
tell application "Image Events" -- Required fo 'open', 'scale to', 'save with', and 'close' commands.
launch
set fRef to open the_file -- Open the image file
scale fRef to size 800 -- Scale the image
save fRef with icon -- Save the image
close fRef -- Close the image
end tell
on error msg
display dialog msg -- Handle any errors.
end try
end scaleImage800
Mac OS X (10.4.6)

Subsciption and notification in segw transaction end to end scenario with example

Subscription and notification scenario using service buider in sap netweaver gateway with end to end scenario with example .

Hi,
Please go through these links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
Thanks
Vikranth Khimavath

Transaction ending prematurely

Similar Messages

Maybe you are looking for