Transaction for Blocked stock as on date

Hi,
Is there any transaction to get the blocked stock as on a particular date?
Regards,
Srinivas

Hi,
Please try it in T code MB5B where in you give movement type 103 and selection date and execute.
REgards
Ram

Similar Messages

Report for shedule vs supply and report for opening stock at back date.

Dear All Guru,
please can anybody reply me is there any standard report is available for
1) Report for shedule vs supply
2) and report for opening stock at back date.(ex- opening stock at last month 16th july or two months back on 10th may
pl suggest if any standard report is available or how we can data for this
Regards,
Vimlesh

Hi,
To see the opening stock at a particular date use T.Code: MB5B,
To see the scheduled quantity & delivered quantity use table EKET with the filed names MENGE & WEMNG.
Regards,
Prabu

Clear difference for blocked stock in LI21

Hi Gurus,
I try to clear difference for blocked stock in LI21, an error will show up saying 'reason for movement xxxx not supported ' but in OMBS, reasons for movement type 711 and 712 are maintained correctly.
also , for unrestricted use stock, clearing difference can be performed well. do you know what's the problem . thank you in advance!
BR,
Dragsky

Dragsky
Hi
Firstly 711 and 712 are not 'reasons for movements' they are Movement types and they are used to write 0ff (711) and write on (712) stock via a stock count (physical inventory)
In the configuration in
Logistics Execution > Warehouse Management > Activities > Physical Inventory > Clear differences (Interface to Inventory Management) and then select the top one - MM-IM Movement types for clearing inventory.
Yoe will see in the SAP standard that 711 and 712 are for unrestricted stock
You need to copy the rest for your warehouse with Category Q, R and S which are different movement types (713 to 718)
This means that you can clearBlocked stock with movement types 717 and 718.
I hope that this helps
Frenchy

Transfer posting from material to material ( for blocked stock)

Dear All,
Whether transfer posting from material to material can be done for blocked stock also? because through 309 movement type i did not find any option, so let me know if there is any option
Regards,
Balakrishna R.V

Dear
Transfer posting of material can't be done if material is in Block Stock.
When block stock is inspected in quality test in inquality inspection stock then it goes to Unrestricted use stock.
finally Transfer posting is possible for unrestricted use stock material.

Stock in transit for Block stock

Kindly suggest on scenario below here with.
As like stock in transit can be seen through Mov. type 313,303 for un resticted stock. Can we see the stock in transit for Block stock. If so how.?
Thanks & Regards
Sudhansu

Hi,
In the two-step process, Inventory Management function isonly used.
Issuing plant
MB1B --> Movement type - 303
              Issuing plant & Storage location ---> Enter the receiving plant and storage location and quantity.
Receiving plat
MB1B --> movement tyoe- 305
         Enter the receiving plant and storage location. The material and quantity received.
The above process can be replicated using the TCode MIGO
Step 1 : Remove from Storage -- Other --Movement Type 303 Enter the From and Destination plant in the Transfer posting tab.
Step 2: Place in Storage -- Other/ Material Document (generated at the time of issue) movement tyoe- 305
            Enter the material and quantity received.
          Placement in Storage is only made in the unrestricted stock.
Possible reasons for carrying out the a stock transfer in two steps are:
a) The plants are located at quite a distance from each other and the goods are in transit for a prolonged period of time;
b) there is one employee responsible at each plant, and each can only post movements for his/her own plant.
hope you understand.
regards,
bijoy kumar

Recurring inspection for blocked stock

Hi all
I am trying to create an inspection lot for recurring inspection for my material. Now the stock for this material is currently blocked. What I want to know is if its possible to have blocked stock moved into quality inspection for recurring inspection.
Regards
Obie

Hi Obie,
I am not sure but it may not be feasible to move the batch stock from block stock to quality inspection with recurring inspection. As I checked in OMJJ, I did not find QA07 transaction code as allowable for 349 movement.
On the contrary, once the batch reaches to its expiry, stock can be posted to QI or block from unrestricted.
I would suggest to use 08 inspection type for transferring material from block to quality inspection.
Regards,
Anand Rao

How to see the material document for Blocked stock

Hello Experts
I having some blocked stock in plant X , How to see the material document for this stock.
Thanks in Advance
Prashanth.v
Edited by: prashanth.venkategowda on Aug 11, 2010 7:38 PM

which material documents do you want to see?
Material documents can be found and displayed in MB51 transaction.
in MMBE you can put the cursor onto your stock line and then choose from menu Environment > material documents and SAP will list all relevant material documents.
block stock status is not a selection criteria, material number, plant storage location, batch number are selection criterias.
if you want only documents to block stock, then you need to select by movement type, e.g. 343 and 344 are movements that change status from unrestricted to blocked or vica versa.

Creation Of Custom Transaction For RF enabled devices "mobile data entry"

Hello Everyone,
i need some information, or some material or some example's for creating custom transactions that will invoke the standard good issue transaction of sap from the handled device using the RF , so can anybody give some reference which will help me in creating custom transaction for a RF enabled handled device, which will invoke the standard sap goods issue transaction( mb1a) ,, there are some LM-transaction which do goods issue from the RF enabled handled device, but in my case i want to do goods issue using reservation as my input, so can anybody guide me or send some reference material matching to my problem, i would really appreciate it..
thanks in advance...
sapient2006

Hi Hussaini,
Here are the steps.
1> Customization needs to be completed in SPRO. Logistics Execution -> Mobile Data entry section. Also compare entries with LM01 for understanding.
2> In the 'Define menu management', you can create dynamic menus. For Menu or transaction type, if you enter "1", a menu appears; if you enter "2", a transaction appears. Custom transactions can be created and assigned here.
Once that is done, when you execute LM01 you will see your custom transactions come up. Make sure that these are created keeping in mind the RF device screen size and limitations.
Regards,
Anand.

MIGO-Mtype-103 batch not crted for blocked stock.in UD want batch

Dear Friends ,
GR at Blocked stock non valuated stock u2013
Batch management is activated.
1)     Creating PO
2)     MIGO with M.Type-103 u2013Goods received for PO in to GR blocked stock.
Stock quantity of material gets updated. But system does not create batch.
3)     While making user decision(UD) in quality management (QA32) , system asking batch .
But batch for that material is not created.
Therefore I am not able to move stock to unrestricted stock. how to overcome this problem.
Regards,
Mahesh.

Hi Mahesh......
Please check this thread.....
Re: Split Valuation configuration
Thanks & Regards,
Rahul

Able to post Invoice for Blocked stock from quality

Hi
I did GR for material against PO for 50 pcs, During QA32 stock posting i posted 30 pcs to Unres. stock(101) and 20 pieces to blocked stock(350) storage locations.
Now when I am trying to create MIRO invoice verification, I am getting all the 50 pcs and available to post also for the entire quantity. How the system is allowing me to carryout Invoice verification for the blocked stock 20 pcs also ???
It should allow me to process the 30 pcs only which are in unres. stock .
How do I block the blocked stock from getting invoiced ?
Please help
Thanks
Samuel

Dear Jurgen
Thanks for the reply, master does contain the control key, I also have the inpsection set_up for the materials. During PO in delivery tab at item level I am getting stock type as Quality Inspection. During GR, lot is getting generated and we are able to Stock post it using QA11. Every thing works fine till the stock is there in Quality till the run of Txn QA11. But once stock is out of quality we are having the issue for the stock posted to blocked, I can understand MIRO picking up Unrestricted Quantity of the Lot but why it is also picking the quantity posted to blocked stock as we do not want to pay the vendor for this stock quanitity till we clear it.
Is there any normal config setting to stop it form geting picked during MIRO.
Thanks

Quality-Invoicing for Blocked stock

Hi
I did GR for material against PO for 50 pcs, During QA32 stock posting i posted 30 pcs to Unres. stock(101) and 20 pieces to blocked stock(350) storage locations.
Now when I am trying to create MIRO invoice verification, I am getting all the 50 pcs and available to post also for the entire quantity. How the system is allowing me to carryout Invoice verification for the blocked stock 20 pcs also ???
It should allow me to process the 30 pcs only which are in unres. stock .
How do I block the blocked stock from getting invoiced ?
Thanks
Samuel

Hi,
Please use the following badi to have a control on this. Please take a help of your ABAP consultant.
invoice_update
Method: Change_at_save. Pls Implement the same, This will not allow to do MIRO for materials in blocked stock.
Hope this will work you.
Thanks & Regards
Kundan Kumar

Quality check for block stock

Dear QM experts,
I want to know which inspection types is suitable for check a material in block stock.
Here is the case,
First i used insp type 04 for GR from production. After we got the result that the lot is rejected, then we post the stock into block stock. After that my client want to do quality rechecking with a new inspection lot.
So, my question is how SAP can support this business process?
Thanks in advance,
Helly

Hi Amol,
Thanks a lot for ur reply.
I just wanna make sure.
If we use 08, is it means that every goods movement will create an inspection lot unless we make a customizing for the movement type with QM not active ?
Helly

Any Standard FM for material stocks on posting date using Tcode MB5B

Hi,
I need   Standard FM to get material stocks on posting date using   Tcode   :   MB5B
Stock type i am using is : Storage Location/Batch Stock
the Input   i am providing is    Material, Plant , Storage Location, selection date From , selecDate To.
Then   i need to get data that it provides   header and document item level.
Can u please tel me how do i get that material stock data on posting date and in which tables
it will be populated in the database.
ITs required can u take view and post info
Thanks & Regards
sivakumar kasa
Edited by: siva kumar kasa on Dec 21, 2010 2:30 PM
Edited by: siva kumar kasa on Dec 22, 2010 7:15 AM

hi Rehan,
I have checked all settings also enhancement but there is no as such control to restrict backposting within current period
I think its self disipline action not to post backdated GI when GR is done on later date
Vishal...

Vendor Payment for Blocked stock

Can we have control over vendor payment if stock is partly posted to unrestricted and partly posted to blocked stock?

As block stock is as good as you have accepted the vendors material so only way is to use
User exit LMR1M001 |User exits in Logistics Invoice Verification in MIRO-->this will provide additional blocks in MIRO

Transaction for warehouse stocks per material

Hi
I am wondering if anyone knows of a transaction that gives you the current 'GOOD' stock you have per material and per warehouse, ideally it would look something like the below:
Part number
Factory warehouse
External warehouse 1
External warehouse 2
1
25
5
12
2
50
0
45
3
100
0
67
4
125
2
0
5
150
10
2
6
200
250
32
Any help would be much appreciated.
Thanks.

There is no such report in WM, in WM you always only look into 1 warehouse at a time.
You can of course something similar with MB52 report, you only need to enter the plant and the storage locations that are connected to the warehouses (table T320) in your selection.
You can then filter on unrestricted use stock when the result appears.
However, the values are listed beneath each other columns and not in rows as in your table above.

Transaction for Blocked stock as on date

Similar Messages

Maybe you are looking for