Transaction for triggering of form through print program for FI
Hi,
I went in table T001F. Now I see couple of programs and forms asscoaited with it.
Now lets say program RFKQST20 and associated form is F_RFKQST20_CO_02. Now how do I know what transaction I can test the triggering i.e printing of this form thorugh its print program ?
Mostly in FI the print programs themself are driver programs for printing outputs. You can directly execute print programs such as RFKQST20 to issue outputs. If you want to find out trnsaction associated, do a where used for trnsactions and find out.
Thanks,
Shashi Reddy
Similar Messages
-
Hello friends ,
I have a print program that has been configured for HR . I have 2 z forms .When I activated the debugger it went to just one form . When I checked form2 it showed the z program as one of the print programs . How do I relate the form2 to my print program ? I need to change the layout of form2 . Before that I want to know when is the print program calling the form2 .
Thanks & Regards,Hello Hari,
First create a output type for the form2. GO to Transaction NACE and assign the Form name , Print Program and Routine name to that Output type.
Process the output tyepe now. You will get the second form.
Regards,
Vasanth -
How to give input parameter to application form through se38 program?
Hi all,
How can i call my application form from within my se38 program?
is there any way then please tell me?
and how to pass input parameters to application form through se38 program?
Thanks and Regards,
Arpita.Hi you can pass the parameter using application program. You can pass the value using the interface of the function module given below.
parameter p_matnr type mara-matnr.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = gc_smart_form 'Name of ur smart form
variant = ' '
direct_call = ' '
IMPORTING
fm_name = lv_fmname
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE 'E'
NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION lv_fmname
EXPORTING
control_parameters = gs_ssfctrlop
output_options = gs_ssfcompop
user_settings = ' X'
**---This is where u can pass ur paramter to the smart form*
matnr = p_matnr.
called from batch job
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5 .
Thanx and hope this would help.
Regards,
Aruna
Edited by: Aruna Kumari Chekka on Dec 12, 2008 6:24 AM
Edited by: Aruna Kumari Chekka on Dec 12, 2008 6:29 AM -
Code for the transaction ME42 to call the customised print program
HI,
I am working on forms, i have the transcation ME42, i need to call the customised print prg, from the print program i need to call the form.
In nace i have customised the print prg with the smartform and i have checked with the table tnapr.
what coding should i give in the customised print prg so the when the transaction ME42 is save the print prg is called.
I am checking the standard print prg how is it calling . i am not able to find . can u pls tell what code can be usedHello Anitha,
Use this code
Entry routine
FORM ENTRY USING RETURN_CODE US_SCREEN.
CLEAR RETCODE.
XSCREEN = US_SCREEN.
PERFORM PROCESSING.
IF RETCODE NE 0.
RETURN_CODE = 1.
ELSE.
RETURN_CODE = 0.
ENDIF.
ENDFORM.
In the for Processin, U do all the opration to proint the form.
Reaward if useful.
Vasanth -
Smart forms and print program needed
Can anyone provide me with the following print programs and smart forms? I can't find it in my SAP. Thanks.
Print Program:
/SMB40/M07DR
Smart Forms:
/SMB40/MMGR1_A
/SMB40/MMGR3_A
/SMB40/MMGI1_A
Please kindly email me at [email protected]Hi
I appreciate for your sincierty i cant send through mail but i'm sending directly plz copy all the programs
INCLUDE /SMB40/M07DRTOP.
PROGRAM /BPR3PF/m07dr MESSAGE-ID m7.
DATA lgortsplit LIKE am07m-xselk.
DATA ladr LIKE sadr.
DATA *ladr LIKE sadr.
CONSTANTS: a TYPE c VALUE 'A',
b TYPE c VALUE 'B',
c TYPE c VALUE 'C',
d TYPE c VALUE 'D',
e TYPE c VALUE 'E',
f TYPE c VALUE 'F',
g TYPE c VALUE 'G',
h TYPE c VALUE 'H',
i TYPE c VALUE 'I',
j TYPE c VALUE 'J',
k TYPE c VALUE 'K',
l TYPE c VALUE 'L',
m TYPE c VALUE 'M',
n TYPE c VALUE 'N',
o TYPE c VALUE 'O',
p TYPE c VALUE 'P',
q TYPE c VALUE 'Q',
r TYPE c VALUE 'R',
s TYPE c VALUE 'S',
t TYPE c VALUE 'T',
u TYPE c VALUE 'U',
v TYPE c VALUE 'V',
w TYPE c VALUE 'W',
x TYPE c VALUE 'X',
y TYPE c VALUE 'Y',
z TYPE c VALUE 'Z'.
CONSTANTS: plus TYPE c VALUE '+',
minus TYPE c VALUE '-',
punkt TYPE c VALUE '.',
null TYPE c VALUE '0',
eins TYPE c VALUE '1',
zwei TYPE c VALUE '2',
drei TYPE c VALUE '3',
vier TYPE c VALUE '4',
fuenf TYPE c VALUE '5',
sechs TYPE c VALUE '6',
sieben TYPE c VALUE '7',
acht TYPE c VALUE '8',
neun TYPE c VALUE '9',
einsi TYPE i VALUE '1',
zweii TYPE i VALUE '2',
dreii TYPE i VALUE '3',
vieri TYPE i VALUE '4',
nzwei TYPE i VALUE '02',
ndrei TYPE i VALUE '03'.
CONSTANTS: actvt01 LIKE tact-actvt VALUE '01',
actvt02 LIKE tact-actvt VALUE '02',
actvt03 LIKE tact-actvt VALUE '03',
actvt04 LIKE tact-actvt VALUE '04',
actvt06 LIKE tact-actvt VALUE '06',
actvt65 LIKE tact-actvt VALUE '65',
actvt70 LIKE tact-actvt VALUE '70'.
CONSTANTS: maximum TYPE f VALUE 9999999999999,
minimum TYPE f VALUE -9999999999999,
maximum_gld TYPE f VALUE 99999999999,
minimum_gld TYPE f VALUE -99999999999,
maxvalue LIKE am07m-maxvalue VALUE 9999999999999,
minvalue LIKE am07m-maxvalue VALUE -9999999999999,
cnull(18) TYPE c VALUE '000000000000000000',
pf02(4) TYPE c VALUE 'PF02',
pf15(4) TYPE c VALUE 'PF15',
stern TYPE c VALUE '*',
doublestar(2) TYPE c VALUE '**',
underscore TYPE c VALUE '_',
slasch TYPE c VALUE '/',
dpunkt TYPE c VALUE ':',
curtp00 LIKE smbew-curtp VALUE '00', "Transaktionswährung
curtp10 LIKE smbew-curtp VALUE '10', "ML in Hauswährung
auto_best LIKE mseg-ebeln VALUE '9999999999',
modulpool LIKE sy-repid VALUE 'SAPMM07M'.
CONSTANTS: BEGIN OF hlp,
b(4) TYPE c VALUE 'HLPB',
f(4) TYPE c VALUE 'HLPF',
g(4) TYPE c VALUE 'HLPG',
m(4) TYPE c VALUE 'HLPM',
r(4) TYPE c VALUE 'HLPR',
v(4) TYPE c VALUE 'HLPV',
END OF hlp.
"Equates für Alphabet
TABLES:
afko,
aufk,
itcpo,
mkpf,
*mkpf,
mseg,
*mseg,
ekko,
ekkn,
*ekko,
arc_params,
ekpo,
ekbe,
lfa1,
*lfa1,
thead,
toa_dara,
am07m,
*am07m,
t001,
t001w,
*t001w,
t027b,
t027c,
t027d,
t156,
t156t,
t157e,
*t157e,
t159m,
t159n,
t159o,
t159p,
t159s,
t159e,
t024,
t024d,
*t024,
t064b,
nast,
*nast,
tnapr.
TABLES: mabdr,
mtcom,
mtcor,
twlad.
* Reportinterne Daten *
*--- Strukturen ------------------------------------------------------*
DATA: x_protab TYPE c,
x_bwart TYPE c,
bwart LIKE mseg-bwart,
eintraege LIKE sy-tfill,
anzahl LIKE mseg-weanz,
anzahl1(7) TYPE n,
x_kont TYPE c, "Mehrfachkontierung
x_kont1 TYPE c, "Einfache Kontierung (WE unbewertet)
x_form TYPE c,
x_open TYPE c.
DATA: BEGIN OF jahr,
jahr(4) TYPE n,
monat(2) TYPE n,
tag(2) TYPE n,
END OF jahr.
DATA:
BEGIN OF we,
version1 VALUE '1', "Standardversion
version2 VALUE '2', "Version mit Prüftext
version3 VALUE '3', "WE-Sammelschein
END OF we,
BEGIN OF alt,
matnr LIKE mseg-matnr,
bwart LIKE mseg-bwart,
ebeln LIKE mseg-ebeln,
usnam LIKE mkpf-usnam,
END OF alt,
BEGIN OF kunde,
kdauf LIKE mseg-kdauf,
kdpos LIKE mseg-kdpos,
kdein LIKE mseg-kdein,
END OF kunde,
BEGIN OF anlage,
anln1 LIKE mseg-anln1,
anln2 LIKE mseg-anln2,
END OF anlage,
BEGIN OF belpos,
mblnr LIKE mseg-mblnr,
zeile LIKE mseg-zeile,
END OF belpos,
xskkz,
xpsty,
xkdanr VALUE 'C',
xkde VALUE 'E',
xfert VALUE 'F',
xrvkdanr VALUE 'A',
xanlage VALUE 'A',
xanln1 VALUE 'I',
xkostl VALUE 'K',
xprojn VALUE 'P',
xmunbw VALUE 'M',
xumlag VALUE 'U',
xvbelg VALUE 'V',
xnplan VALUE 'N',
xkonsi(2) VALUE 'KB',
xwabel(2) VALUE 'WA',
xwibel(2) VALUE 'WI',
xwebel(2) VALUE 'WE',
xsele, "Position selektiert
xkont, "Kontierungswechsel
xsamm, "Sammel-WE-Schein
xanha. "Mehrfachkontierung
DATA BEGIN OF theader.
INCLUDE STRUCTURE thead.
DATA END OF theader.
*--- Interne Tabellen -------------------------------------------------*
DATA:
BEGIN OF dummy OCCURS 0,
dummy,
END OF dummy.
DATA:
BEGIN OF ausgabe OCCURS 20,
mblnr LIKE mseg-mblnr,
END OF ausgabe.
DATA: BEGIN OF xekkn OCCURS 50.
INCLUDE STRUCTURE ekkn.
DATA: END OF xekkn.
DATA: BEGIN OF xmseg OCCURS 50.
INCLUDE STRUCTURE mseg.
DATA: END OF xmseg.
DATA: BEGIN OF dtext OCCURS 1.
INCLUDE STRUCTURE tline.
DATA: END OF dtext.
DATA: BEGIN OF dktext OCCURS 1.
INCLUDE STRUCTURE tline.
DATA: END OF dktext.
DATA: BEGIN OF dptext OCCURS 1.
INCLUDE STRUCTURE thead.
DATA: END OF dptext.
DATA: BEGIN OF nast_key,
mblnr LIKE mkpf-mblnr,
mjahr LIKE mkpf-mjahr,
zeile LIKE mseg-zeile,
END OF nast_key.
DATA: BEGIN OF beltab OCCURS 20.
INCLUDE STRUCTURE mseg.
DATA: vgart LIKE mkpf-vgart,
blart LIKE mkpf-blart,
blaum LIKE mkpf-blaum,
bldat LIKE mkpf-bldat,
budat LIKE mkpf-budat,
cpudt LIKE mkpf-cpudt,
cputm LIKE mkpf-cputm,
aedat LIKE mkpf-aedat,
usnam LIKE mkpf-usnam,
tcode LIKE mkpf-tcode,
xblnr LIKE mkpf-xblnr,
bktxt LIKE mkpf-bktxt,
frath LIKE mkpf-frath,
frbnr LIKE mkpf-frbnr,
wever LIKE mkpf-wever,
kzdru LIKE t156-kzdru,
END OF beltab.
DATA: BEGIN OF traptab OCCURS 50.
INCLUDE STRUCTURE mseg.
DATA: vgart LIKE mkpf-vgart,
blart LIKE mkpf-blart,
blaum LIKE mkpf-blaum,
bldat LIKE mkpf-bldat,
budat LIKE mkpf-budat,
cpudt LIKE mkpf-cpudt,
cputm LIKE mkpf-cputm,
aedat LIKE mkpf-aedat,
usnam LIKE mkpf-usnam,
tcode LIKE mkpf-tcode,
xblnr LIKE mkpf-xblnr,
bktxt LIKE mkpf-bktxt,
frath LIKE mkpf-frath,
frbnr LIKE mkpf-frbnr,
wever LIKE mkpf-wever,
END OF traptab.
DATA: BEGIN OF inthead OCCURS 50.
INCLUDE STRUCTURE thead.
DATA: END OF inthead.
DATA: BEGIN OF intline OCCURS 50.
INCLUDE STRUCTURE tline.
DATA: END OF intline.
DATA: BEGIN OF intline1 OCCURS 50.
INCLUDE STRUCTURE tline.
DATA: END OF intline1.
*-------- Hilfsfelder -------------------------------------------------*
DATA: index_z LIKE sy-tabix,
drucker LIKE rm07m-ldest,
old_tdform LIKE t159o-tdform,
r_werks LIKE t001w-werks,
r_name1 LIKE t001w-name1,
x_form3 TYPE c,
x_nopdest TYPE c,
language LIKE t001w-spras,
zaehler_m LIKE sy-tabix,
edruck TYPE c.
DATA: old_mkpf LIKE mkpf-usnam,
old_budat LIKE mkpf-budat,
old_cpudt LIKE mkpf-cpudt,
old_werks LIKE t001w-werks,
old_name1 LIKE t001w-name1,
old_mblnr LIKE mkpf-mblnr,
old_lifnr LIKE ekko-lifnr,
old_ebeln LIKE ekko-ebeln,
old_ekgrp LIKE ekko-ekgrp,
old_reswk LIKE ekko-reswk,
old_linam LIKE am07m-name1,
old_lina2 LIKE am07m-name2,
old_eknam LIKE t024-eknam,
old_ektel LIKE t024-ektel,
old_ematn LIKE mseg-ematn,
old_lfa1 LIKE lfa1,
old_lgort LIKE mseg-lgort,
old_ladr LIKE ladr,
save_mkpf LIKE mkpf-usnam,
save_budat LIKE mkpf-budat,
save_cpudt LIKE mkpf-cpudt,
save_werks LIKE t001w-werks,
save_name1 LIKE t001w-name1,
save_mblnr LIKE mkpf-mblnr,
save_lifnr LIKE ekko-lifnr,
save_reswk LIKE ekko-reswk,
save_ebeln LIKE ekko-ebeln,
save_ekgrp LIKE ekko-ekgrp,
save_linam LIKE am07m-name1,
save_lina2 LIKE am07m-name2,
save_eknam LIKE t024-eknam,
save_ektel LIKE t024-ektel,
save_ematn LIKE mseg-ematn,
save_lfa1 LIKE lfa1,
save_lgort LIKE mseg-lgort,
save_ladr LIKE ladr,
offwhile TYPE c,
& TYPE c VALUE '&',
blank TYPE c VALUE ' ',
fenster(5) TYPE c VALUE 'WIN ',
fcount(2) TYPE c,
text1(21) TYPE c VALUE 'INTLINE-TDLINE+ ( )',
text2(22) TYPE c VALUE 'INTLINE1-TDLINE+ ( )',
text5(22) TYPE c VALUE 'INTLINE1-TDLINE+ ( )',
hifeld1(21) TYPE c VALUE 'INTLINE-TDLINE+ (10)',
shift(2) TYPE n,
fpage LIKE sy-pagno,
xscreen(1) TYPE c,
retco LIKE sy-subrc,
mblnr LIKE mkpf-mblnr,
zeile LIKE mseg-zeile,
new_page,
xkopfdr, "Kopf bereits gedruckt
n_vornr LIKE resb-vornr. "Netzplanvorgang
INCLUDE /SMB40/M07DRMTA.
*------Lesen Tabelle T001----------------------------------------------*
FORM TAB001_LESEN.
IF NOT T001-BUKRS = MSEG-BUKRS.
SELECT SINGLE * FROM T001 WHERE BUKRS = MSEG-BUKRS.
ENDIF.
ENDFORM.
*-------Lesen Tabelle T001w--------------------------------------------*
FORM TAB001W_LESEN.
IF NOT T001W-WERKS = MSEG-WERKS.
SELECT SINGLE * FROM T001W WHERE WERKS = MSEG-WERKS.
ENDIF.
R_WERKS = T001W-WERKS.
R_NAME1 = T001W-NAME1.
* Sprache für Formular aus Kondition, sonst aus Werk
IF NOT NAST-SPRAS IS INITIAL.
LANGUAGE = NAST-SPRAS.
ELSE.
LANGUAGE = T001W-SPRAS.
ENDIF.
SET LANGUAGE LANGUAGE.
ENDFORM.
*-------Lesen Tabelle T001w bei Werkswechsel --------------------------*
FORM TAB001W_LESEN_2.
IF NOT MSEG-WERKS = T001W-WERKS.
SELECT SINGLE * FROM T001W WHERE WERKS = MSEG-WERKS.
ENDIF.
ENDFORM.
*--------Lesen Tabelle T156--------------------------------------------*
FORM TAB156_LESEN.
IF NOT T156-BWART = MSEG-BWART.
SELECT SINGLE * FROM T156 WHERE BWART = MSEG-BWART.
ENDIF.
ENDFORM.
*-------Lesen Tabelle T156t--------------------------------------------*
FORM TAB156T_LESEN.
SELECT SINGLE * FROM T156T WHERE SPRAS = LANGUAGE
AND BWART = MSEG-BWART
AND SOBKZ = MSEG-SOBKZ
AND KZBEW = MSEG-KZBEW
AND KZZUG = MSEG-KZZUG
AND KZVBR = MSEG-KZVBR.
ENDFORM.
*------Lesen Tabelle T024----------------------------------------------*
FORM TAB024_LESEN.
IF NOT T024-EKGRP = EKKO-EKGRP.
SELECT SINGLE * FROM T024 WHERE EKGRP = EKKO-EKGRP.
ENDIF.
ENDFORM.
*------Lesen Tabelle T024D---------------------------------------------*
FORM TAB024D_LESEN.
SELECT SINGLE * FROM T024D WHERE WERKS = MSEG-WERKS
AND DISPO = AFKO-DISPO.
ENDFORM.
*---------------------- T027B,C lesen ---------------------------------*
FORM T027_LESEN.
SELECT SINGLE * FROM T027B WHERE SPRAS = LANGUAGE
AND EVERS = MSEG-EVERS.
CHECK NOT MSEG-EVERE IS INITIAL.
SELECT SINGLE * FROM T027C WHERE EVERS = MSEG-EVERS
AND EVERE = MSEG-EVERE.
IF NOT T027C-EVDRK IS INITIAL.
SELECT SINGLE * FROM T027D WHERE SPRAS = LANGUAGE
AND EVERS = MSEG-EVERS
AND EVERE = MSEG-EVERE.
ENDIF.
ENDFORM.
*------------ Lesen der Tabelle T159P Barcode oder Mehrfachdruck ------*
*----------------------- gewünscht ? ----------------------------------*
FORM LESEN_T159P.
IF NOT T159P-TDDEST = NAST-LDEST.
SELECT SINGLE * FROM T159P WHERE TDDEST = NAST-LDEST.
ENDIF.
ENDFORM.
*& Form T064B_LESEN
* Lesen Text zur Bestandsart Qualität/Gesperrt bei WE
FORM T064B_LESEN.
DATA: BSTAR LIKE T064B-BSTAR.
CASE MSEG-INSMK.
WHEN SPACE.
CLEAR T064B.
EXIT.
WHEN F.
CLEAR T064B.
EXIT.
WHEN X.
BSTAR = ZWEI.
WHEN ZWEI.
BSTAR = ZWEI.
WHEN S.
BSTAR = VIER.
WHEN DREI.
BSTAR = VIER.
ENDCASE.
IF NOT T064B-BSTAR = BSTAR.
SELECT SINGLE * FROM T064B WHERE SPRAS = LANGUAGE
AND BSTAR = BSTAR.
ENDIF.
ENDFORM. " T064B_LESEN
INCLUDE /SMB40/M07DRMMA.
*---------Material lesen-----------------------------------------------*
FORM MATERIAL_LESEN.
CLEAR MTCOM.
MTCOM-KENNG = 'MABDR'.
MTCOM-MATNR = MSEG-MATNR.
MTCOM-WERKS = MSEG-WERKS.
MTCOM-LGORT = MSEG-LGORT.
MTCOM-SPRAS = LANGUAGE.
MTCOM-NOMUS = 'X'.
CALL FUNCTION 'MATERIAL_LESEN'
EXPORTING
SCHLUESSEL = MTCOM
IMPORTING
MATDATEN = MABDR
RETURN = MTCOR
TABLES
SEQMAT01 = DUMMY.
IF NOT T156-KZMHD IS INITIAL.
IF NOT MABDR-MHDLP IS INITIAL.
IF T001W-VLFKZ = B. "Zentrale ?
PERFORM MHD_BERECHNEN.
ENDIF.
ENDIF.
ENDIF.
ENDFORM.
*----------------- Mindesthaltbarkeit berechnen ---------------------*
FORM MHD_BERECHNEN.
IF NOT EKPO-MHDRZ IS INITIAL.
AM07M-MHDAT = MSEG-VFDAT - ( EKPO-MHDRZ * MABDR-MHDLP / 100 ).
ELSEIF NOT MABDR-MHDRZ IS INITIAL.
AM07M-MHDAT = MSEG-VFDAT - ( MABDR-MHDRZ * MABDR-MHDLP / 100 ).
ENDIF.
ENDFORM.
*----------------- Prueftext lesen-------------------------------------*
FORM PRUEFTEXT_LESEN.
CLEAR DPTEXT.
CLEAR THEADER.
REFRESH DPTEXT.
THEADER-TDID = 'PRUE'.
THEADER-TDSPRAS = LANGUAGE.
THEADER-TDNAME = MSEG-MATNR.
THEADER-TDOBJECT = 'MATERIAL '.
CALL FUNCTION 'SELECT_TEXT'
EXPORTING
ID = THEADER-TDID
LANGUAGE = THEADER-TDSPRAS
NAME = THEADER-TDNAME
OBJECT = THEADER-TDOBJECT
IMPORTING
ENTRIES = EINTRAEGE
TABLES
SELECTIONS = DPTEXT.
ENDFORM.
* Lesen der Herstellerteilenummer *
FORM LESEN_HTN.
SELECT SINGLE MFRPN FROM MARA
INTO (AM07M-MFRPN) WHERE MATNR = MSEG-EMATN.
ENDFORM.
INCLUDE /SMB40/M07DRMBE.
*-------------Bestellung lesen-----------------------------------------*
FORM BESTELLUNG_LESEN."ORDER READING
DATA: NAME1 LIKE ADDR1_VAL-NAME1.
DATA: OLD_LIFNR LIKE EKKO-LIFNR.
CLEAR AM07M-NAME1.
CLEAR AM07M-NAME2.
IF EKKO-EBELN NE MSEG-EBELN.
SELECT SINGLE * FROM EKKO WHERE EBELN = MSEG-EBELN.
ENDIF.
SELECT SINGLE * FROM EKPO WHERE EBELN = MSEG-EBELN
AND EBELP = MSEG-EBELP.
* Purchase order history because of XBLNR read, since from MKPF can
*deviate
SELECT SINGLE * FROM EKBE WHERE EBELN = MSEG-EBELN
AND EBELP = MSEG-EBELP
AND VGABE = '1'
AND GJAHR = MSEG-MJAHR
AND BELNR = MSEG-MBLNR
AND BUZEI = MSEG-ZEILE.
IF NOT SY-SUBRC IS INITIAL.
CLEAR EKBE.
ELSE.
IF NOT EKBE-XBLNR IS INITIAL.
MKPF-XBLNR = EKBE-XBLNR.
ENDIF.
ENDIF.
CALL FUNCTION 'MM_ADDRESS_GET'
EXPORTING I_EKKO = EKKO
IMPORTING E_NAME1 = NAME1
EXCEPTIONS OTHERS = 1.
AM07M-NAME1 = NAME1.
IF NOT EKKO-LLIEF IS INITIAL.
OLD_LIFNR = EKKO-LIFNR.
EKKO-LIFNR = EKKO-LLIEF.
CALL FUNCTION 'MM_ADDRESS_GET'
EXPORTING I_EKKO = EKKO
IMPORTING E_NAME1 = NAME1
EXCEPTIONS OTHERS = 1.
AM07M-NAME2 = NAME1.
EKKO-LIFNR = OLD_LIFNR.
ENDIF.
XPSTY = EKPO-KNTTP.
CASE XPSTY.
WHEN B.
XPSTY = XKDE.
WHEN D.
XPSTY = XKDE.
WHEN G.
XPSTY = XPROJN.
WHEN O.
XPSTY = XPROJN.
WHEN Q.
XPSTY = XPROJN.
ENDCASE.
ENDFORM.
*----------Bestelltext lesen, wenn Matnr. = 0--------------------------*
FORM BESTELLTEXT_LESEN.
CLEAR: THEADER,
THEAD,
DTEXT.
REFRESH
DTEXT.
THEADER-TDID = 'F01 '.
THEADER-TDSPRAS = EKKO-SPRAS.
THEADER-TDNAME(10) = MSEG-EBELN.
THEADER-TDNAME+10(5) = MSEG-EBELP.
THEADER-TDOBJECT = 'EKPO '.
CALL FUNCTION 'READ_TEXT'
EXPORTING ID = THEADER-TDID
LANGUAGE = THEADER-TDSPRAS
NAME = THEADER-TDNAME
OBJECT = THEADER-TDOBJECT
IMPORTING HEADER = THEAD
TABLES LINES = DTEXT
EXCEPTIONS ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5.
ENDFORM.
*------------Bestellkopf lesen für WE-Version 2.-----------------------*
FORM BESTELLKOPF_LESEN.
CLEAR: THEADER,
THEAD,
DKTEXT.
REFRESH:
DKTEXT.
THEADER-TDID = 'F01 '.
THEADER-TDSPRAS = EKKO-SPRAS.
THEADER-TDNAME(10) = MSEG-EBELN.
THEADER-TDOBJECT = 'EKKO '.
CALL FUNCTION 'READ_TEXT'
EXPORTING ID = THEADER-TDID
LANGUAGE = THEADER-TDSPRAS
NAME = THEADER-TDNAME
OBJECT = THEADER-TDOBJECT
IMPORTING HEADER = THEAD
TABLES LINES = DKTEXT
EXCEPTIONS ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5.
ENDFORM.
INCLUDE /SMB40/M07DRMFA.
*------ Auftragskopf lesen --------------------------------------------*
FORM AUFTRAG_LESEN.
SELECT SINGLE * FROM AFKO WHERE AUFNR = MSEG-AUFNR.
IF MSEG-MATNR IS INITIAL.
SELECT SINGLE * FROM AUFK WHERE AUFNR = MSEG-AUFNR.
IF NOT SY-SUBRC IS INITIAL.
MESSAGE E001 WITH 'AUFK' MSEG-AUFNR.
ELSE.
MABDR-MAKTX = AUFK-KTEXT.
ENDIF.
ENDIF.
ENDFORM.
INCLUDE /SMB40/M07DRKON.
FORM KONTIERUNG_LESEN.
REFRESH XEKKN. CLEAR XEKKN.
SELECT * FROM EKKN WHERE EBELN = EKPO-EBELN
AND EBELP = EKPO-EBELP.
MOVE-CORRESPONDING EKKN TO XEKKN.
APPEND XEKKN.
* x_kont = x.
ENDSELECT.
DESCRIBE TABLE XEKKN LINES INDEX_Z.
IF INDEX_Z GT 1.
X_KONT = X.
ELSE.
X_KONT1 = X.
ENDIF.
ENDFORM.
* Network plan process determine.
FORM NW_VORGANG_LESEN USING F_AUFPL F_APLZL.
CALL FUNCTION 'READ_NETWORK_NPLNR_VORNR'
EXPORTING
APLZL = F_APLZL
AUFPL = F_AUFPL
IMPORTING
VORNR = N_VORNR
EXCEPTIONS
NOT_FOUND = 01.
ENDFORM.
* FORM PSP_CONVERT *
* Konvertierung des internen Felds PS_PSP_PNR zur Ausgabe *
FORM PSP_CONVERT USING PSPNR LIKE MSEG-PS_PSP_PNR.
CALL FUNCTION 'CJPN_INTERN_TO_EXTERN_CONV'
EXPORTING
INT_NUM = PSPNR
IMPORTING
EXT_NUM = AM07M-KONTIERUNG.
ENDFORM.
INCLUDE /SMB40/M07DRF01.
FORM WF01_DRUCK.
CALL FUNCTION 'START_FORM'
EXPORTING FORM = TNAPR-FONAM
LANGUAGE = LANGUAGE.
BELPOS-MBLNR = MKPF-MBLNR.
BELPOS-ZEILE = MSEG-ZEILE.
CONDENSE BELPOS NO-GAPS.
AM07M-BELPOS = BELPOS.
IF T156-SHKZG = H.
AM07M-HDLNE = TEXT-020.
ELSE.
AM07M-HDLNE = TEXT-010.
ENDIF.
IF NOT T159P-BACOD IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1BACOKOPF'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1KOPF'.
ENDIF.
IF XPSTY IS INITIAL.
IF MSEG-XBLVS IS INITIAL.
PERFORM WF1_LAGERMATERIAL. "Lagermaterial
ELSE.
PERFORM WF1_LVSMATERIAL. "LVS-Material
ENDIF.
ELSE.
PERFORM WF1_VERBRAUCHSMATERIAL.
ENDIF.
CALL FUNCTION 'END_FORM'.
PERFORM MKTO_DRUCK.
ENDFORM.
*------------ Drucken Lagermaterial ---------------------------------*
FORM WF1_LAGERMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1LGMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUELGGRUND'.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'LGAUSST'.
ENDFORM.
FORM WF1_LVSMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1LVSMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUELVSGRUND'.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'LVSAUSST'.
ENDFORM.
*-------------Drucken Verbrauchsmaterial------------------------------*
FORM WF1_VERBRAUCHSMATERIAL.
CASE XPSTY.
WHEN XKDANR. "Kundenauftrag
MOVE SPACE TO KUNDE.
CLEAR AM07M-KOTXT.
AM07M-KOTXT = TEXT-030.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
KUNDE-KDEIN = MSEG-KDEIN.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XANLAGE. "Anlage
MOVE SPACE TO ANLAGE.
CLEAR AM07M-KOTXT.
AM07M-KOTXT = TEXT-040.
ANLAGE-ANLN1 = MSEG-ANLN1.
ANLAGE-ANLN2 = MSEG-ANLN2.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE ANLAGE NO-GAPS.
AM07M-KONTIERUNG = ANLAGE.
WHEN XKOSTL. "Kostenstelle
CLEAR AM07M-KOTXT.
AM07M-KOTXT = TEXT-050.
AM07M-KONTIERUNG = MSEG-KOSTL.
WHEN XPROJN. "Projekt/Netzplan
CLEAR AM07M-KOTXT.
IF MSEG-NPLNR IS INITIAL.
AM07M-KOTXT = TEXT-060.
PERFORM PSP_CONVERT USING MSEG-PS_PSP_PNR.
ELSE.
AM07M-KOTXT = TEXT-061.
AM07M-KONTIERUNG = MSEG-NPLNR.
PERFORM NW_VORGANG_LESEN USING MSEG-AUFPL MSEG-APLZL.
IF NOT N_VORNR IS INITIAL.
MOVE '/' TO AM07M-KONTIERUNG+12.
MOVE N_VORNR TO AM07M-KONTIERUNG+13.
ENDIF.
ENDIF.
ENDCASE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1VERBRMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUELVERBRGRUND'.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'VERBRAUSST'.
ENDFORM.
INCLUDE /SMB40/M07DRF02.
FORM WF02_DRUCK.
T001W-WERKS = R_WERKS.
T001W-NAME1 = R_NAME1.
CALL FUNCTION 'START_FORM'
EXPORTING FORM = TNAPR-FONAM
LANGUAGE = LANGUAGE.
PERFORM PRUEFTEXT_LESEN.
IF T156-SHKZG = 'H'. "Kennzeichen Haben ?
AM07M-HDLNE = TEXT-020.
ELSE.
AM07M-HDLNE = TEXT-010.
ENDIF.
IF NOT T159P-BACOD IS INITIAL.
BELPOS-MBLNR = MKPF-MBLNR.
BELPOS-ZEILE = MSEG-ZEILE.
CONDENSE BELPOS NO-GAPS.
AM07M-BELPOS = BELPOS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'WE2BACOKOPF'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'WE2KOPF'.
ENDIF.
IF XPSTY IS INITIAL. "Lagermaterial ?
PERFORM W2_LAGERMATERIAL.
ELSE.
PERFORM W2_VERBRAUCHSMATERIAL.
ENDIF.
CALL FUNCTION 'END_FORM'.
PERFORM MKTO_DRUCK.
ENDFORM.
*-------------- Lagermaterial WE-Version 2 ---------------------------*
FORM WF2_LAGERMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'WE2LGMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUELGGRUND'.
ENDIF.
THEAD-TDID = THEADER-TDID.
THEAD-TDNAME = THEADER-TDNAME.
THEAD-TDOBJECT = THEADER-TDOBJECT.
THEAD-TDSPRAS = THEADER-TDSPRAS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'PRTXTLGMAT'.
ENDFORM.
*------------ Verbrauchsmaterial WE-Version 2 ----------------------*
FORM WF2_VERBRAUCHSMATERIAL.
CASE XPSTY.
WHEN XKDANR.
MOVE SPACE TO KUNDE.
CLEAR AM07M-KOTXT.
AM07M-KOTXT = TEXT-030.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
KUNDE-KDEIN = MSEG-KDEIN.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XANLAGE.
MOVE SPACE TO ANLAGE.
CLEAR AM07M-KOTXT.
AM07M-KOTXT = TEXT-040.
ANLAGE-ANLN1 = MSEG-ANLN1.
ANLAGE-ANLN2 = MSEG-ANLN2.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE ANLAGE NO-GAPS.
AM07M-KONTIERUNG = ANLAGE.
WHEN XKOSTL.
CLEAR AM07M-KOTXT.
AM07M-KOTXT = TEXT-050.
AM07M-KONTIERUNG = MSEG-KOSTL.
WHEN XPROJN.
CLEAR AM07M-KOTXT.
IF MSEG-NPLNR IS INITIAL.
AM07M-KOTXT = TEXT-060.
PERFORM PSP_CONVERT USING MSEG-PS_PSP_PNR.
ELSE.
AM07M-KOTXT = TEXT-061.
AM07M-KONTIERUNG = MSEG-NPLNR.
PERFORM NW_VORGANG_LESEN USING MSEG-AUFPL MSEG-APLZL.
IF NOT N_VORNR IS INITIAL.
MOVE '/' TO AM07M-KONTIERUNG+12.
MOVE N_VORNR TO AM07M-KONTIERUNG+13.
ENDIF.
ENDIF.
ENDCASE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'WE2VERBRMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUEVERBRGRUND'.
ENDIF.
THEAD-TDID = THEADER-TDID.
THEAD-TDNAME = THEADER-TDNAME.
THEAD-TDOBJECT = THEADER-TDOBJECT.
THEAD-TDSPRAS = THEADER-TDSPRAS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'PRTXTVERBRMAT'.
ENDFORM.
INCLUDE /SMB40/M07DRE01.
FORM WE01_DRUCK.
T001W-WERKS = R_WERKS.
T001W-NAME1 = R_NAME1.
ENDFORM.
*------------ Drucken Lagermaterial ---------------------------------*
FORM W1_LAGERMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1LGMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUELGGRUND'.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'LGAUSST'.
ENDFORM.
FORM W1_LVSMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1LVSMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUELVSGRUND'.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'LVSAUSST'.
ENDFORM.
*-------------Drucken Verbrauchsmaterial------------------------------*
FORM W1_VERBRAUCHSMATERIAL.
CLEAR: AM07M-KOTXT, AM07M-KONTIERUNG.
CASE XPSTY.
WHEN XFERT. "Fertigungsauftrag
AM07M-KOTXT = TEXT-062.
IF X_KONT1 IS INITIAL.
AM07M-KONTIERUNG = MSEG-AUFNR.
ELSE.
AM07M-KONTIERUNG = EKKN-AUFNR.
ENDIF.
WHEN XKDE. "Kundeneinzelbest.
MOVE SPACE TO KUNDE.
AM07M-KOTXT = TEXT-030.
IF X_KONT1 IS INITIAL.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
ELSE.
KUNDE-KDAUF = EKKN-VBELN.
KUNDE-KDPOS = EKKN-VBELP.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XKDANR. "Kundenauftrag
MOVE SPACE TO KUNDE.
AM07M-KOTXT = TEXT-030.
IF X_KONT1 IS INITIAL.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
KUNDE-KDEIN = MSEG-KDEIN.
ELSE.
KUNDE-KDAUF = EKKN-VBELN.
KUNDE-KDPOS = EKKN-VBELP.
KUNDE-KDEIN = EKKN-VETEN.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XANLAGE. "Anlage
MOVE SPACE TO ANLAGE.
AM07M-KOTXT = TEXT-040.
IF X_KONT1 IS INITIAL.
ANLAGE-ANLN1 = MSEG-ANLN1.
ANLAGE-ANLN2 = MSEG-ANLN2.
ELSE.
ANLAGE-ANLN1 = EKKN-ANLN1.
ANLAGE-ANLN2 = EKKN-ANLN2.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE ANLAGE NO-GAPS.
AM07M-KONTIERUNG = ANLAGE.
WHEN XKOSTL. "Kostenstelle
AM07M-KOTXT = TEXT-050.
IF X_KONT1 IS INITIAL.
AM07M-KONTIERUNG = MSEG-KOSTL.
ELSE.
AM07M-KONTIERUNG = EKKN-KOSTL.
ENDIF.
WHEN XPROJN. "Projekt/Netzplan
IF X_KONT1 IS INITIAL.
IF MSEG-NPLNR IS INITIAL.
AM07M-KOTXT = TEXT-060.
PERFORM PSP_CONVERT USING MSEG-PS_PSP_PNR.
ELSE.
AM07M-KOTXT = TEXT-061.
AM07M-KONTIERUNG = MSEG-NPLNR.
PERFORM NW_VORGANG_LESEN USING MSEG-AUFPL MSEG-APLZL.
IF NOT N_VORNR IS INITIAL.
MOVE '/' TO AM07M-KONTIERUNG+12.
MOVE N_VORNR TO AM07M-KONTIERUNG+13.
ENDIF.
ENDIF.
ELSE.
IF EKKN-NPLNR IS INITIAL.
AM07M-KOTXT = TEXT-060.
PERFORM PSP_CONVERT USING EKKN-PS_PSP_PNR.
ELSE.
AM07M-KOTXT = TEXT-061.
AM07M-KONTIERUNG = EKKN-NPLNR.
PERFORM NW_VORGANG_LESEN USING EKKN-AUFPL EKKN-APLZL.
IF NOT N_VORNR IS INITIAL.
MOVE '/' TO AM07M-KONTIERUNG+12.
MOVE N_VORNR TO AM07M-KONTIERUNG+13.
ENDIF.
ENDIF.
ENDIF.
ENDCASE.
CLEAR X_KONT1.
* User-Exit über Erweiterung MBCF0005
CALL CUSTOMER-FUNCTION '001'
EXPORTING
I_MKPF = MKPF
I_MSEG = MSEG
I_EKKO = EKKO
I_EKPO = EKPO
I_NAST = NAST
I_TNAPR = TNAPR
TABLES
I_EKKN = XEKKN
CHANGING
C_AM07M = AM07M
EXCEPTIONS
OTHERS = 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1VERBRMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUELVERBRGRUND'.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'VERBRAUSST'.
ENDFORM.
INCLUDE /SMB40/M07DRE02.
* FORM WE02_DRUCK *
FORM WE02_DRUCK.
T001W-WERKS = R_WERKS.
T001W-NAME1 = R_NAME1.
CALL FUNCTION 'START_FORM'
EXPORTING
FORM = TNAPR-FONAM
LANGUAGE = LANGUAGE.
PERFORM PRUEFTEXT_LESEN.
IF NOT MSEG-VFDAT IS INITIAL.
AM07M-MHTXT = TEXT-105.
ENDIF.
IF NOT AM07M-MHDAT IS INITIAL.
AM07M-MHZTX = TEXT-106.
ENDIF.
IF EKKO-BSART = 'UB'.
AM07M-LITXT = TEXT-101.
AM07M-LIBZG = EKKO-RESWK.
ELSE.
AM07M-LITXT = TEXT-100.
AM07M-LIBZG = EKKO-LIFNR.
IF NOT EKKO-LLIEF IS INITIAL.
AM07M-LIBZ2 = EKKO-LLIEF.
ELSE.
AM07M-LIBZ2 = EKKO-LIFNR.
ENDIF.
ENDIF.
IF T156-SHKZG = 'H'. "Kennzeichen Haben ?
AM07M-HDLNE = TEXT-020.
ELSE.
AM07M-HDLNE = TEXT-010.
ENDIF.
IF NOT T159P-BACOD IS INITIAL.
BELPOS-MBLNR = MKPF-MBLNR.
BELPOS-ZEILE = MSEG-ZEILE.
CONDENSE BELPOS NO-GAPS.
AM07M-BELPOS = BELPOS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE2BACOKOPF'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE2KOPF'.
ENDIF.
IF XPSTY IS INITIAL. "Lagermaterial ?
* User-Exit über Erweiterung MBCF0005
CALL CUSTOMER-FUNCTION '001'
EXPORTING
I_MKPF = MKPF
I_MSEG = MSEG
I_EKKO = EKKO
I_EKPO = EKPO
I_NAST = NAST
I_TNAPR = TNAPR
TABLES
I_EKKN = XEKKN
CHANGING
C_AM07M = AM07M
EXCEPTIONS
OTHERS = 0.
IF MSEG-XBLVS IS INITIAL.
PERFORM W2_LAGERMATERIAL. "Lagermaterial
ELSE.
PERFORM W2_LVSMATERIAL. "LVS-Material
ENDIF.
ELSE.
PERFORM W2_VERBRAUCHSMATERIAL.
ENDIF.
CALL FUNCTION 'END_FORM'.
PERFORM MKTO_DRUCK.
ENDFORM.
*-------------- Lagermaterial WE-Version 2 ---------------------------*
FORM W2_LAGERMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE2LGMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'RUELGGRUND'.
ENDIF.
THEAD-TDID = THEADER-TDID.
THEAD-TDNAME = THEADER-TDNAME.
THEAD-TDOBJECT = THEADER-TDOBJECT.
THEAD-TDSPRAS = THEADER-TDSPRAS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'PRTXTLGMAT'.
ENDFORM.
*-------------- LVS-Daten WE-Version 2 ---------------------------*
FORM W2_LVSMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'W1LVSMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'RUELVSGRUND'.
ENDIF.
THEAD-TDID = THEADER-TDID.
THEAD-TDNAME = THEADER-TDNAME.
THEAD-TDOBJECT = THEADER-TDOBJECT.
THEAD-TDSPRAS = THEADER-TDSPRAS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'PRTXTLVSMAT'.
ENDFORM.
*------------ Verbrauchsmaterial WE-Version 2 ----------------------*
FORM W2_VERBRAUCHSMATERIAL.
CLEAR: AM07M-KOTXT, AM07M-KONTIERUNG.
CASE XPSTY.
WHEN XFERT. "Fertigungsauftrag
AM07M-KOTXT = TEXT-062.
IF X_KONT1 IS INITIAL.
AM07M-KONTIERUNG = MSEG-AUFNR.
ELSE.
AM07M-KONTIERUNG = EKKN-AUFNR.
ENDIF.
WHEN XKDE.
MOVE SPACE TO KUNDE.
AM07M-KOTXT = TEXT-030.
IF X_KONT1 IS INITIAL.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
ELSE.
KUNDE-KDAUF = EKKN-VBELN.
KUNDE-KDPOS = EKKN-VBELP.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XKDANR.
MOVE SPACE TO KUNDE.
AM07M-KOTXT = TEXT-030.
IF X_KONT1 IS INITIAL.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
KUNDE-KDEIN = MSEG-KDEIN.
ELSE.
KUNDE-KDAUF = EKKN-VBELN.
KUNDE-KDPOS = EKKN-VBELP.
KUNDE-KDEIN = EKKN-VETEN.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XANLAGE.
MOVE SPACE TO ANLAGE.
AM07M-KOTXT = TEXT-040.
IF X_KONT1 IS INITIAL.
ANLAGE-ANLN1 = MSEG-ANLN1.
ANLAGE-ANLN2 = MSEG-ANLN2.
ELSE.
ANLAGE-ANLN1 = EKKN-ANLN1.
ANLAGE-ANLN2 = EKKN-ANLN2.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE ANLAGE NO-GAPS.
AM07M-KONTIERUNG = ANLAGE.
WHEN XKOSTL.
AM07M-KOTXT = TEXT-050.
IF X_KONT1 IS INITIAL.
AM07M-KONTIERUNG = MSEG-KOSTL.
ELSE.
AM07M-KONTIERUNG = EKKN-KOSTL.
ENDIF.
WHEN XPROJN.
IF X_KONT1 IS INITIAL.
IF MSEG-NPLNR IS INITIAL.
AM07M-KOTXT = TEXT-060.
PERFORM PSP_CONVERT USING MSEG-PS_PSP_PNR.
ELSE.
AM07M-KOTXT = TEXT-061.
AM07M-KONTIERUNG = MSEG-NPLNR.
PERFORM NW_VORGANG_LESEN USING MSEG-AUFPL MSEG-APLZL.
IF NOT N_VORNR IS INITIAL.
MOVE '/' TO AM07M-KONTIERUNG+12.
MOVE N_VORNR TO AM07M-KONTIERUNG+13.
ENDIF.
ENDIF.
ELSE.
IF EKKN-NPLNR IS INITIAL.
AM07M-KOTXT = TEXT-060.
PERFORM PSP_CONVERT USING EKKN-PS_PSP_PNR.
ELSE.
AM07M-KOTXT = TEXT-061.
AM07M-KONTIERUNG = EKKN-NPLNR.
PERFORM NW_VORGANG_LESEN USING EKKN-AUFPL EKKN-APLZL.
IF NOT N_VORNR IS INITIAL.
MOVE '/' TO AM07M-KONTIERUNG+12.
MOVE N_VORNR TO AM07M-KONTIERUNG+13.
ENDIF.
ENDIF.
ENDIF.
ENDCASE.
CLEAR X_KONT1.
* User-Exit über Erweiterung MBCF0005
CALL CUSTOMER-FUNCTION '001'
EXPORTING
I_MKPF = MKPF
I_MSEG = MSEG
I_EKKO = EKKO
I_EKPO = EKPO
I_NAST = NAST
I_TNAPR = TNAPR
TABLES
I_EKKN = XEKKN
CHANGING
C_AM07M = AM07M
EXCEPTIONS
OTHERS = 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE2VERBRMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'RUEVERBRGRUND'.
ENDIF.
THEAD-TDID = THEADER-TDID.
THEAD-TDNAME = THEADER-TDNAME.
THEAD-TDOBJECT = THEADER-TDOBJECT.
THEAD-TDSPRAS = THEADER-TDSPRAS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'PRTXTVERBRMAT'.
ENDFORM.
INCLUDE /SMB40/M07DRE03.
* FORM WE03_AUSGABE *
FORM WE03_AUSGABE using lgortsplit.
*----------------Drucken WE-Version 3 Überschrift---------------------*
if lgortsplit is initial.
ON CHANGE OF MKPF-MBLNR OR MSEG-EBELN OR MSEG-BWART
OR NAST-KSCHL OR MSEG-WERKS.
CLEAR XKOPFDR.
endon.
else.
ON CHANGE OF MKPF-MBLNR OR MSEG-EBELN OR MSEG-BWART
OR NAST-KSCHL OR MSEG-WERKS
OR MSEG-LGORT.
CLEAR XKOPFDR.
endon.
endif.
IF XKOPFDR IS INITIAL.
XKOPFDR = X.
IF NEW_PAGE = X.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'NEW-PAGE'.
ENDIF.
IF EKKO-BSART = 'UB'.
AM07M-LITXT = TEXT-101.
AM07M-LIBZG = EKKO-RESWK.
ELSE.
AM07M-LITXT = TEXT-100.
AM07M-LIBZG = EKKO-LIFNR.
IF NOT EKKO-LLIEF IS INITIAL.
AM07M-LIBZ2 = EKKO-LLIEF.
ELSE.
AM07M-LIBZ2 = EKKO-LIFNR.
ENDIF.
ENDIF.
IF T156-SHKZG = H.
AM07M-HDLNE = TEXT-020.
ELSE.
AM07M-HDLNE = TEXT-010.
ENDIF.
IF XPSTY IS INITIAL. "Lagermaterial ?
IF MSEG-XBLVS IS INITIAL.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
IF NOT T159P-BACOD IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3BACOKOPF'
WINDOW = 'RÜKOPF'.
NEW_PAGE = X.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3KOPF'
WINDOW = 'RÜKOPF'.
NEW_PAGE = X.
ENDIF.
ELSE.
IF NOT T159P-BACOD IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3BACOKOPF'
WINDOW = 'KOPF'.
NEW_PAGE = X.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3KOPF'
WINDOW = 'KOPF'.
NEW_PAGE = X.
ENDIF.
ENDIF.
ELSE.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
IF NOT T159P-BACOD IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3BACOLVSKOPF'
WINDOW = 'RÜKOPF'.
NEW_PAGE = X.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3LVSKOPF' "RL-Material
WINDOW = 'RÜKOPF'.
NEW_PAGE = X.
ENDIF.
ELSE.
IF NOT T159P-BACOD IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3BACOLVSKOPF'
WINDOW = 'KOPF'.
NEW_PAGE = X.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3LVSKOPF' "RL-Material
WINDOW = 'KOPF'.
NEW_PAGE = X.
ENDIF.
ENDIF.
ENDIF.
ELSE.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
IF NOT T159P-BACOD IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3BACOKOPF1'
WINDOW = 'RÜKOPF'.
NEW_PAGE = X.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3KOPF1'
WINDOW = 'RÜKOPF'.
NEW_PAGE = X.
ENDIF.
ELSE.
IF NOT T159P-BACOD IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3BACOKOPF1'
WINDOW = 'KOPF'.
NEW_PAGE = X.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3KOPF1'
WINDOW = 'KOPF'.
NEW_PAGE = X.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
*------------- Drucken WE-Version 3 Position --------------------------*
**perform w3_lieferplan. "Routine Lieferplan
CLEAR T157E.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
ENDIF.
IF MSEG-EBELN IS INITIAL.
IF NOT MABDR-MAKTX IS INITIAL.
EKPO-TXZ01 = MABDR-MAKTX.
ENDIF.
ENDIF.
IF MABDR-WERTU IS INITIAL AND
MABDR-MENGU = X OR "Bestandsfuehrung = UNBW oder
XPSTY IS INITIAL. "Lagermaterial ?
* User-Exit über Erweiterung MBCF0005
CALL CUSTOMER-FUNCTION '001'
EXPORTING
I_MKPF = MKPF
I_MSEG = MSEG
I_EKKO = EKKO
I_EKPO = EKPO
I_NAST = NAST
I_TNAPR = TNAPR
TABLES
I_EKKN = XEKKN
CHANGING
C_AM07M = AM07M
EXCEPTIONS
OTHERS = 0.
IF MSEG-XBLVS IS INITIAL.
PERFORM W3_LAGERMATERIAL. "Routine Lagermaterial
ELSE.
PERFORM W3_LVSMATERIAL. "Routine RL-Material
ENDIF.
ELSE.
PERFORM W3_VERBRAUCHSMATERIAL. "Routine Verbrauchsmaterial
ENDIF.
*-------------- Drucken WE-Version 3 Seitenfuss ----------------------*
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3FUSS'
WINDOW = 'FUSS'
FUNCTION = 'APPEND'.
ENDFORM.
*--------------Unteroutinen für Positionsdruck -----------------------*
FORM W3_LAGERMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3LGMAT'.
ENDFORM.
* FORM W3_LVSMATERIAL *
FORM W3_LVSMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3LVSMAT'.
ENDFORM.
* FORM W3_VERBRAUCHSMATERIAL *
FORM W3_VERBRAUCHSMATERIAL.
CLEAR: AM07M-KONTIERUNG.
AM07M-RSTYP = XPSTY.
CASE XPSTY.
WHEN XFERT. "Fertigungsauftrag
IF X_KONT1 IS INITIAL.
AM07M-KONTIERUNG = MSEG-AUFNR.
ELSE.
AM07M-KONTIERUNG = EKKN-AUFNR.
ENDIF.
WHEN XANLAGE.
MOVE SPACE TO ANLAGE.
IF X_KONT1 IS INITIAL.
ANLAGE-ANLN1 = MSEG-ANLN1.
ANLAGE-ANLN2 = MSEG-ANLN2.
ELSE.
ANLAGE-ANLN1 = EKKN-ANLN1.
ANLAGE-ANLN2 = EKKN-ANLN2.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE ANLAGE NO-GAPS.
AM07M-KONTIERUNG = ANLAGE.
WHEN XKDE. "Kundeneinzelbestand?
MOVE SPACE TO KUNDE.
IF X_KONT1 IS INITIAL.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
ELSE.
KUNDE-KDAUF = EKKN-VBELN.
KUNDE-KDPOS = EKKN-VBELP.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XKDANR. "Kundenauftrag ?
MOVE SPACE TO KUNDE.
IF X_KONT1 IS INITIAL.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
KUNDE-KDEIN = MSEG-KDEIN.
ELSE.
KUNDE-KDAUF = EKKN-VBELN.
KUNDE-KDPOS = EKKN-VBELP.
KUNDE-KDEIN = EKKN-VETEN.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XKOSTL. "auf Kostenstelle kontiert
IF X_KONT1 IS INITIAL.
AM07M-KONTIERUNG = MSEG-KOSTL.
ELSE.
AM07M-KONTIERUNG = EKKN-KOSTL.
ENDIF.
WHEN XPROJN. "auf Projekt/Netzplan
IF X_KONT1 IS INITIAL.
IF MSEG-NPLNR IS INITIAL.
PERFORM PSP_CONVERT USING MSEG-PS_PSP_PNR.
ELSE.
AM07M-KONTIERUNG = MSEG-NPLNR.
PERFORM NW_VORGANG_LESEN USING MSEG-AUFPL MSEG-APLZL.
IF NOT N_VORNR IS INITIAL.
MOVE '/' TO AM07M-KONTIERUNG+12.
MOVE N_VORNR TO AM07M-KONTIERUNG+13.
ENDIF.
ENDIF.
ELSE.
IF EKKN-NPLNR IS INITIAL.
PERFORM PSP_CONVERT USING EKKN-PS_PSP_PNR.
ELSE.
AM07M-KONTIERUNG = EKKN-NPLNR.
PERFORM NW_VORGANG_LESEN USING EKKN-AUFPL EKKN-APLZL.
IF NOT N_VORNR IS INITIAL.
-
Reg: Smart forms and print programs
Hi
I would like to locate the print programs and the corresponding smart forms. say for invoice we have a smart form available and how to track the print program for it. pls advise.
thkx
PrabhuHi Prabhu,
You can track the Program through mainintaing table TNAPR. TNAPR is the table which is having entries for "Processing Programs for output".
Here you have fields like
pgnam - Program Name
sform - Smartform Name
fonam - Script Name
kschl - Output type
Here,You can maintain form against a program name.
Hope you are clear.
Regards,
Siddhesh Sanghvi. -
Forms and Print program Urgent please!!
I have created a copy from a standard form (F150_dunn_01) and a print program (SAPLF150). Now, Could you tell me how can I know if the form is assigned to the program? or How to assign the program to the form?
I mean, assign to the Zform and Zprogram
Thanks and regards.Hi .
There are two ways to find out the corresponding
print program for a sapscript form .
they are ,
1.go to the change editor of ur sapscript form in transaction se78 ,place ur cursor at any of ur screen field and goto ->print program ->symbol definition with dialog .
here u can find out the print program of ur corrsponding form.
2.when u r in ur main screen of tansaction se78 ,goto
form->check->texts.
here u can find out the print program of ur corrsponding form.
these r the two ways in finding out ur print programs of sapscript form.
reg any doubt reply me .
with regs,
karthik srinivasan -
Error when exexuting a smart form from print program
Hi,
I have created a Print Program & Layout Set [Smart Form].
Now when i executed Print program it is throwing following error.
As internal table that we are passing to F.M is not having any data i have appended some data in debug mode.
After htting Print Immediaely Button Following EXIT Error is coming.
No table is currently processed, switching lines is not possible.
Message no. SSFCOMPOSER 183
Diagnosis
You tried to switch to the next table line, but currently no table is open for output.
System Response
The system issues an error message.
Procedure
This is probably an internal error. Please contact the SAP hotline and report the problem.
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.Make sure that you have proper definations of internal table in program and smartform.
Regards,
Amey -
Develop a form and print program using VBAP, VBAK, MRKT.
I have 2 tables VBAK [fields: VBELN, ERDAT, ERNAM, AUDAT, VBTYP, VKORG] and VBAP [Fields: POSNR, MATNR, CHARG, WAERK] and In output(form) i need the following fields,
Output table:
-VBELN
-ERDAT
-VKORG
-POSNR
-MATNR
-MAKTX <- this field is from table MAKT. (I need the Material descriptions too for all the materials.)
Form Layout should have Header, Logo (SAP ENJOY), Main, Footer.
Problem is that i need footer only after the End of Complete data in Main Window, thats is footer should be placed only in last window. How should i do that ?
Logic which i thot to make the print program is : First declare an internal table itab1 with VBAP, VBAP using the above fields from two tables and fetch the product based on matnr.
declare one internal table itab2 and select the records from the table makt by checking the condition itab1 is not initial.
sample code.
IF ITAB1 IS NOT INITIAL.
SELECT FIELD LIST FROM MAKT INTO TABLE ITAB2 WHERE MATNR EQ ITAB1-MATNR.
ENDIF.
hope this shuld work. ?????Hi
see the sample script program and do accordingly
*& Report ZTEST12121
*& SAPScripts Example 1
REPORT ztest12121.
*DATABASE TABLES
TABLES: ekko,ekpo,lfa1.
*INTERNAL TABLES AND STRUCTURES
DATA i_ekko LIKE ekko.
DATA i_ekpo LIKE ekpo OCCURS 0 WITH HEADER LINE.
DATA i_lfa1 LIKE lfa1.
*PARAMETERS
PARAMETERS: p_ebeln LIKE ekko-ebeln.
*VARIABLES
DATA MAT TYPE STRING VALUE 'MAT NO'.
DATA iTe TYPE STRING VALUE 'ITEM NO'.
DATA QTY TYPE STRING VALUE 'QTY'.
DATA UOM TYPE STRING VALUE 'UOM'.
DATA NET TYPE STRING VALUE 'NET PRICE'.
Data var type integer value 0.
*DATABASE SELECTS
*Header data
SELECT SINGLE * FROM ekko INTO i_ekko WHERE ekko~ebeln = p_ebeln.
IF sy-subrc = 0.
*Item Data
SELECT * FROM ekpo INTO TABLE i_ekpo WHERE ekpo~ebeln = p_ebeln.
IF sy-subrc NE 0.
WRITE 'PURCHASE DOCUMENT ITEM DATA ERROR'.
ELSE.
*Vendor Details
SELECT SINGLE * FROM lfa1 INTO i_lfa1 WHERE lfa1~lifnr = i_ekko-lifnr.
IF sy-subrc NE 0.
WRITE 'VENDOR DOCUMENT ITEM DATA ERROR'.
ENDIF.
ENDIF.
ELSE.
WRITE 'THIS PURCHASE DOCUMENT NUMBER DOESNOT EXISTS'.
ENDIF.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
form = 'ZSCRIPT_1'
language = sy-langu
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
SPONUMIV =
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
CODEPAGE = 11
OTHERS = 12
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'OFFICEAD'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'OFFICEAD'
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'PODET'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'PODET'
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'TOP'
FUNCTION = 'SET'
TYPE = 'TOP'
WINDOW = 'MAIN'
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT I_EKPO.
var = i_ekpo-netpr * i_ekpo-menge.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'BODY'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Structure of a print program
OPEN_FORM function
CLOSE_FORM function
WRITE_FORM
START_FORM function
END_FORM function
CONTROL_FORM function
The print program is used to print forms. The program retieves the necesary data from datbase tables, defines the order of in which text elements are printed, chooses a form for printing and selects an output device and print options.
Function modules in a printprogram:
When you print a form you must used the staments OPEN_FORM and CLOSE_FORM. To combine forms into a single spool request use START_FORM and END_FORM.
To print textelements in a form use WRITE_FORM. The order in which the textelements are printed, is determined by the order of the WRITE_FORM statements. Note: for printing lines in the body, you can also use the WRITE_FORM_LINES function module.
To transfer control command to a form use CONTROL_FORM.
Structure of a print program
Read data
Tables: xxx.
SELECT *
FROM xxx.
Open form printing - Must be called before working with any of the other form function modules.
Must be ended with function module CLOSE FORM
call function 'OPEN_FORM'.....
To begin several indentical forms containing different data within a single spool request, begin each form using START_FORM, and end it using END_FORM
call funtion 'START_FORM'.....
Write text elements to a window of the form
call function 'WRITE_FORM'.....
Ends spool request started with START_FORM
call funtion 'END_FORM'.....
Closes form printing
call function 'CLOSE_FORM'...
OPEN_FORM function
Syntax:
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = ' '
LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
FORM Name of the form
DEVICE PRINTER : Print output using spool
TELEFAX: Fax output
SCREEN: Output to screen
OPTIONS Used to control attrubutes for printing or faxing (Number of copies, immediate output....
The input for the parameter is structure ITCPO.
CLOSE_FORM function
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Paramerters:
RESULT Returns status information and print/fax parameters after the form has been printed. RESULT is of structure ITCPP.
WRITE_FORM function
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = ' '
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
ELEMENT Specifies which textelement is printed
WINDOW Specifies which window is printed
TYPE Specifies the output area of the main window. This can be:
TOP - Used for headers
BODY
BOTTOM - Used for footers
FUNCTION Specifies whether text is to be appended, replaced or added
Example of how to use the WRITE_FORM function module together with a script.
Form layout of the MAIN window
/E INTRODUCTION
Dear Customer
/E ITEM_HEADER
IH Carrier, Departure
/E ITEM_LINE
IL &SBOOK-CARRID&, &SPFLI-DEPTIME&
/E CLOSING_REMARK
The print program
Writing INTRODUCTION
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'INTRODUCTION'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Writing ITEM_HEADER
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Set ITEM_HEADER into TOP area of main window for subsequent pages
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Write ITEM_LINE
LOOP AT .....
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_LINE'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8.
ENDLOOP.
Delete ITEM_HEADER from TOP area of main window
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'DELETE'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Print CLOSING_REMARK
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'CLOSING_REMARK'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
START_FORM function
CALL FUNCTION 'START_FORM'
EXPORTING
ARCHIVE_INDEX =
FORM = ' '
LANGUAGE = ' '
STARTPAGE = ' '
PROGRAM = ' '
MAIL_APPL_OBJECT =
IMPORTING
LANGUAGE =
EXCEPTIONS
FORM = 1
FORMAT = 2
UNENDED = 3
UNOPENED = 4
UNUSED = 5
SPOOL_ERROR = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END_FORM function
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SPOOL_ERROR = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONTROL_FORM function
The CONTROL_FORM function module alows you to create SapScript control statements from within an APAB program.
Syntax:
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command =
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Example:
Protecting the text element ITEM_LINE
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
TEXELEMENT = 'ITEM_LINE'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'ENDPROTECT'.
Regards
Anji -
Hi,
Help please!
I am modifying the dunning forms, but i have a problem i need to do some modificactions to the standard print program, so what I made a copy but now how Can I do so that the form (SAPscript) uses the new print program?
Thanks.Hi Marisol
Please check the following link (for which i got reward poits too )
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode6-1&contenttype=url&content=https://Re: Print Program
Regards
Ashish Jain -
Server name message when triggering process chain through ABAP PROGRAM
Hi all,
When I am trying to execute one process chain with variant as a APD ( In this APD data is getting loaded form one Query to Transactional ODS.) This process chainis being executing through one ABAP program using the following code
CALL FUNCTION 'RSPC_API_CHAIN_SCHEDULE'
EXPORTING
I_CHAIN = 'XYZ'. ( Dummy Process chain name)
While executing this program I am getting following message :
You can specify the name of the application server here
on which all jobs in the chain are scheduled
If you do not specify a name, the jobs from batch
management are divided between the available servers
How to avoid this message.
Can we write any code in the above program to assign any fixed server name so that it will not ask for any server name.
Your help is much appreciated.
Thanks,
Uday.Hi Shanthi,
How to write exception handling for this.
Quick reply is nedeed.
Thanks,
Uday. -
Passing Default printer options to SF through printer program
DATA: control TYPE ssfctrlop,"Smart Forms: Control structure
output_options TYPE ssfcompop,"Smart Composer (transfer) options
control-preview = 'X'."Preview the output of Smartform
control-no_dialog = 'X'."Don't show Dialog
output_options-tddest = 'LOCL'."Spool: Output device
output_options-tdnoprint = 'X'."No printing from print preview
Iam using above code to assign printer options default to smart forms such that user need not select the printer in the runt time.It works well but only when there is no user input required.When the user has to input data for Eg:user enter range for pernr,the program display information between the range.The above code is not working,I have to select the printer again.Can anyone tell me why?
Thanks.DATA: control TYPE ssfctrlop,"Smart Forms: Control structure
output_options TYPE ssfcompop,"Smart Composer (transfer) options
control-preview = 'X'."Preview the output of Smartform
control-no_dialog = 'X'."Don't show Dialog
output_options-tddest = 'LOCL'."Spool: Output device
output_options-tdnoprint = 'X'."No printing from print preview
Iam using above code to assign printer options default to smart forms such that user need not select the printer in the runt time.It works well but only when there is no user input required.When the user has to input data for Eg:user enter range for pernr,the program display information between the range.The above code is not working,I have to select the printer again.Can anyone tell me why?
Thanks. -
Where do I find the form & print program for Trip Results printout at PR05?
where can I find the form and print program for Trip Results printout at PR05?
Thanks,
VenFirst design your custom form and configure that form(assign to appropriate node in SPRO) in SPRO under following path: Travel Management->Travel Expense->Dialog and travel Expense Control->Forms->PDF-Based Forms->Set up feature TRVFE for settlement form (Execute).
Give the custom form name in that node.
Regards
Deepak. -
Print program for delivery output printing
Hi,
I need help with creating a custom smart form and print program for outbound delivery.
1. i want to know how to select data in my print program ? i mean how to i get the delivery number when the output type is executed.
2. What parameters are to be passed so that delivery opens as soon as the output type is processed.
Thank you.
UshaDetails of output triggered can be obtained from nast. By default structure nast is populated with the values when the print program is being processed. Field OBJKY is used for the delivery number; Application : V2
It could be enough to pass an internal table with item level details and an header structure. This more or less is dependent on the output desired.
Rgds,
Karthik -
Is medruck form available in smartform including print program
Can any one tell me a standard form name & print program name in smartforms for medruck in sap scripts.
Hi
For Purchase Order
PUCHASE ORDER
Output type : NEU
ScriptForm Name : MEDRUCK
Driver Program Name : SAPMF06P
smartform name : /SMB40/MMPO_L
copy the std form or smartform and use it after attaching the same in NACE tcode
Reward points if useful
Regards
Anji
Maybe you are looking for
-
How do I change the Wireless Synchornization to Yes in Calendar Properties
Cureve 8520 I am tring to turn the wireless sync option under calendar properties from NO to YES, but the option os grayed out, I went to the calendar> clincked on Menue > Options> selected my calendar> and the wireless Sync in NO and grayed out, ca
-
HELP: iPhoto 6.0.6 memory usage problem, iMac getting *slow*
Hi, I have a 20" iMac with 2 Gig RAM. I have iPhoto 6.0.6 with lots and lots of pictures and little movies (taken with an old digital camera) -- a "get info" on the "iPhoto Library / Originals" folder says there are 9836 items in there. When I open i
-
Hello whilst i am restoring my iphone, half way through i get a error message, unknown error 29 which does not allow restore to complete. At the moment when i switch my phone on it comes up with the usb and itune sign please help
-
Syntax error in program "ZIAFVC20_NRD "
Hello All, Please see the below details of the dump "Syntax Error" Transaction......... "ZXSW " Program............. "SAPLZNRD_CS_MATCHCODES" The current ABAP program "SAPLZNRD_CS_MATCHCODES" had to be terminated because one of the statements could n
-
Interest for a lessons learned information page?
Hi all. I just want to know if there is any interest in a lessons learned information in the wiki pages. Idea is to enlighten security minded persons of some of the security holes there are in the system. However, there is a backside to it and that i