Transaction IB52 - GOTO - PARTNER

Good Day
I am currently busy with implementing Solution Manager 7.0 Ehp1 SP26 CHaRM
However, i notice in transaction IB52 when we try and assign business partners to the functions that only 4 functions are available. (Sold to party, Requester, Service Employee Group)
Transaction IB52 - GOTO - PARTNER
Questions:
1. How do we activate the rest of the functions eg Developer, Tester, IT operator
Anybody had an issue like this before? help
Thanks
Allistair McGuire
Run SAP Consultant

Hello Allistair,
Goto SPRO :
CRM -> Master data -> Installed Base -> Assign Partner Determination Procedure to Installed Base Category
In Ibase category 01 change for your Partner Procedure (e.g. SDHFHEAD ) in columm procedure.
after that your partners will show in iB52 tarnsaction.
Regards.

Similar Messages

Service Desk - need IB52 iBase "partner assignment" mass change

Dear Ladies and Gentlemen,
We are using SAP Service Desk in Solution Manager 7.0 EhP-1.
There are many satellite systems connected to SolMan using Service Desk.
Of course all of them are setup in SMSY, have a valid iBase entry in IB52, and have the "sold-to-party" assigned in IB52 -> Goto -> Partner.
Now we need to assign a new business partner as "sold-to-party" for all these systems.
We do not want to rename the current business partner, but have to assign a new business partner to not influence existing tickets.
Thus, manually we would need to go to IB52 and change the partner assignment in IB52 -> Goto -> Partner and enter a new value for all the systems.
Q: is there a way to perform a mass change for the "sold-to-party" partner assignment of the iBase entries? Is it possible to update or replace all or multiple existing partner assignments in iBase?
Many thanks,
Peter

Hi Christian,
Can you please tell me how did you create iBase for NON-SAP Systems? I know it is IB51/IB52? I am not sure what do you do after that? For an example I went to IB51 and create iBase number 403? now I go to IB52 and put the 403 in the installed Base field and click on Green arrrow to go inside correct? what do I do after that? where is the options to create the iBase name call "Network Group" ?
How did you solve your issue for not showing when you went to F4 in NOTIF_CREATE? was that authorization error? if yes, do you know the object name?
any help is much much appreciated
Thanks in Advance
Kumar

R/3 report of transactions with trading partner

Hi
I posted intercompany transaction (using trading partner). I need to know if there is any tcode for R/3 report which will show transactions with trading partners. I require for AR AP GL transactions.
I came to know that there is some tcode which will show transaction of one trading partner in another books and vice versa. I checked into information system. But i didn't got.
Please let me know

Hi,
For reconciling associated companies, you can access these from the SAP application menu as follows:
SAP menu -> Accounting -> Financial Accounting -> Accounts Receivable or Accounts Payable -> Periodic Processing -> Closing -> Check/Count -> Cross-System Intercompany Reconciliation
These programs provide more functions and flexibility, and they enable you to reconcile data across different systems.
You carry out the Customizing for these programs in the SAP Customizing Guide under:
SPRO> Financial Accounting or Financial Accounting (New) -> Accounts Receivable and Accounts Payable Accounting -> Business Transactions -> Closing -> Count -> Cross-System Intercompany Reconciliation
Regards,
Gaurav

Transaction IB51 / IB52 / IB53 Partner Assignment Table

Hi CRM Gurus,
Good day.
Can you kindly provide the SAP Standard Table wherein the Partners for IBASE are being saved? Thank you very much!
Best regards.
Brando

Hi CRM Gurus,
Good day.
I performed an SQL Trace and found out that Partners are stored at this table: CRMD_PARTNER.
However, it seems that the information that I need --- Address of the partner -
is not there.
Can you kindly provide the SAP Standard Table wherein the Address of Partners for IBASE are being saved?
Thank you very much in advance.
Best regards.
Brando

Restrict Search results in Transaction FPP3 Business Partner

Hallo,
I need to restrict the search results in transaction code FPP3.
When an end user calls the transaction code 'FPP3' and in the left side of the screen makes a search for Business partner based on what ever selection cryteria, standard program finds the values and gives the result on ALV grid.
My problem is I need to check if user has right authorisation to look at Partner and if not delete the partner from Result table. I have treid by implementing events 'SERC1, SECR2 and SERC3' in BDT and implemented the BADI to masK the fields which is not right solution.
Can anybody please give me Tip or an Example how I can solve my problem.
Thank you and Regards
Ravi

Hi Komal,
you can you this in the following way: IMG -> ...-> Treasury and Risk Management -> Basic Functions -> SAP Business Partner for Financial Services -> General Settings -> Business Partner -> Basic Settings -> Business Partner Roles -> Define BP Roles -> select those BP roles you intend to hide for the selection in F4 -> choose detailed view -> look for the fields group 'General data' - > select the checkbox in the field 'Hide'.
one note - as those BP roles are used in other SAP modules as well, make sure, you are not making the incorrect settings in this area.
hope this will help you.
Rgds,
Renatas

Multiple Message Processors in IB52 for partner determination rule 13200137

Hello Experts,
Can anyone please help me out in one of my issues? I am configuring service desk wherein I need to have only one layer of support team. One consultant for each module. I am using SLFN0001_ADVANCED. I am using rule 13200137 for partner determination. I am using IBASE for determining the message processor.
While determining automatic message processor, IBASE is not allowing more than 1 Message processor. So, all the messages created are getting allocated to single message processor only.
In TRN PFAC, rule simulation for the rule 13200137 is working fine, as per the Org model defined in TRN ppopma_crm.
Can anyone please help me out?

Hi Deepak,
Hope, you are trying to assign more than one partner Function (Message Processor) to a service Desk Message. In such case, check for the max limit of partner function allowed for Message processor in the Partner Determination Procedure in your Transaction Type (SLFN).
The partner function category for the Message Processor Partner Function is Person Responsible. You may face issues in assigning more than one partner function of the same partner function category in a Transaction; If so, kindly refer to sap note 844503.
Regards,
Waseem

Inter business area transactions and trading partner business area

Hi Gurus,
We are on R3 4.7. *We have more than one business area but only one company code*.. We do pull financial statements by business area.
One of the business area A gets a service contract to do work. Some part of the work is outsourced from business area A to business Area B. Business Area A pays to business Area B for the services done by business area B.
While doing payment to the business area B, do we need to populate trading partner busiess area as business area A? Is this trading partner busiess area mandatory to be populated in this type of scenario.
Are there any things we need to be aware of when they are inter business area transactions as described in the above scenario.
We are not implementing EC-CS/any other consolidation solution.
Thanks,
Edited by: James09 on Jul 11, 2011 7:41 PM

If no consolidation system is implemeneted, then the partner business area is not mandatory. However it may be helpful for analysis as well as any future consolidations that may be necessary. Therefore it is suggested that this be captured, and in many cases will automatically be populated.

Batch-Input/CALL TRANSACTION FB01: Trading Partner cannot be filled in

Dear experts,
I have the following problem with performing an FB01 booking on the basis of
CALL TRANSACTION USING:
In the customizing of the FI document type you can mark several fields that
are supposed to appear when you perform an FB01 posting, among them
the "Trading partner". But this field only seems to show in Non-BTCI-mode.
There are SAP Notes treating the phenomenon of the additional COBL-data
screen being always brought up with all available fields in BTCI mode
(which is fine for me, since I actually want to fill in some fields there, too),
but this screen does not contain the trading partner and I can't find any hint
why fields like BSEG-VBUND (trading partner) apparently cannot be reached
at all in BTCI-Mode.
Does anybody know this problem, or better yet: have a solution ?
Thanks in advance
Andreas

Hello Akanksha,
I suppose you're interested in how you make the fields available/visible
in the posting transactions ?
BSEG-VBUND/Trading partner for instance belongs to the
supposed-to-be-available checkbox-selection in customizing of the
document type you are going to use for your posting.
The availability of the additional controlling fields (cost center, order no. etc.)
depends on the cost accounting being active and on the field status group
that is chosen for your account.
In the booking/posting transactions you reach the fields with the button
"further data".
Best regards
Andreas

Sold-to-party default partner id map for customer field in SMCR - ChaRM 7.1

Hi Expert,
I am trying to map sold-to-party partner id default in SMCR- CRM screen (when Request for Change screen open) .
In IB52 ->Goto -> Partner , i gave sold-to-party details.
but its not reflecting in Request for Change screen open in CRm_UI.
Rg,
Karthik

Hi Karthik,
have you deleted from other levels?
Also check below note:
1165357 Sold-to-Party is not assigned to Service Desk messa
1518907 - Solution Manager: wrong partner determination after update to Support Package 24
1165357: Sold-to-Party is not assigned to Service Desk
824640: Customizing missing for Service Desk in Solution Manager
is sold to party have BP organization type?
Thanks
Regards
Vikram

Reporter & Customer field empty in solman 7.1 incident created by crmwebui directly issue

Hi All,
We are running SAP SM 7.1 SPS04. Incident Management (CRMWebui based) is setup. Everything works well (e.g. Reporter/Customer fields gets filled automatically) if incident is created from satellite system or from solution manager workcenter. However , If incident is directly created from CRMWebui screen i.e. Create>Incident .....fields 'Reporter' and 'Customer' are blank and not getting determined automatically.
Is this an issue or some other adjustment (other than mantaining sold-to-party in IB52>Goto>Partner or adding BP to contact relationship) which needs to be done.
Please share your thoughts o this if any !!!
Thanks & Regards,
Rupesh

Hi All,
To update on this i realized while creating an incident in CRMWebui screen directly.. if ibase field value is assigned then 'Customer' field gets determined automatically (based on ib52>Partner> sold-to-party). Thus, succeeded in auto 'Customer' field determination.
However, issue of not getting 'Reporter' is till there.
Thanks & Regards,
Rupesh

In the SLFN transaction type partner function sold-to-party

Dear all,
We have connected 7 satelite systems to the solution manager server when the end user create the ticket in the satelite system automatically transaction type will create .When the super user open the transaction type In the Sold-to-party partner function that satelite system name have to display how to canfigure that can Suggest ?.
Regards,
Pavan.
Edited by: pavan reddy on Feb 28, 2008 11:23 AM

Dear pavan,
If am not wrong you already created IBASE component for all the 7 components
Now create BP using BP tcode of organization & sold to party type of satellite system name using external naming system.
And in IB52 just assign using goto partner to these sold to party for e.g.
system A client 500.......................create a BP of name System A of sold to party with BP tcode
and
Goto IB52 select the component and assign the System A to sold to party.
PLEASE REWARD POINTS

Trading partner receiving two same transactions

Hi B2B Gurus,
Our scenario is Division people place the flat files to FTP folder, SOA picks the flat files from FTP and it transforms to EDI XML file and then it place the EDI XML to IP_OUT_QUEUE, B2B picks up the file and it transforms to native EDI and sends it to trading partner.
But here issue is we are sending a single transaction to trading partner and they are receiving the same payload with different filename
Ex: The file named - Penske_860_20110629_172354282965_20110629_132412042.dat (Interchange # 282965)
Contains the same data as - emerson860_pp_out.110629132506.17334
The file named - Penske_860_20110629_183428283017_20110629_143441592.dat (Interchange # 283017)
Contains the same data as - emerson860_pp_out.110629143618.29885
Could any one help us how to cross chek this and wat are the chances for this ...
Regards
Sam

Hi Anuj,
Is it that same TP is receiving one transaction twice or same transaction is being passed to two TP's
ans:same TP is receiving one transaction twice with different filename with same payload.
We are using 10G B2B.
We are sending one transaction to tradaing partner and trading partner receving the same transactions twice with different file name and same payload.
Anuj, I cross check the filename in the log file, i am able to find only one file name in it. (Penske_850)
Is it possible that we sent one file and they are duplicating on theire side?
Regardds
sam

R/3 Report for trading partner transactions

Hi
I posted intercompany transaction (using trading partner). I need to know if there is any tcode for R/3 report which will show transactions with trading partners. I require for AR AP GL transactions.
I came to know that there is some tcode which will show transaction of one trading partner in another books and vice versa. I checked into information system. But i didn't got.

Hi,
For reconciling associated companies, you can access these from the SAP application menu as follows:
SAP menu -> Accounting -> Financial Accounting -> Accounts Receivable or Accounts Payable -> Periodic Processing -> Closing -> Check/Count -> Cross-System Intercompany Reconciliation
These programs provide more functions and flexibility, and they enable you to reconcile data across different systems.
You carry out the Customizing for these programs in the SAP Customizing Guide under:
SPRO> Financial Accounting or Financial Accounting (New) -> Accounts Receivable and Accounts Payable Accounting -> Business Transactions -> Closing -> Count -> Cross-System Intercompany Reconciliation
Regards,
Gaurav

Indexing for Business Partner Duplicate check((Manual Account Creation)

Hi,
We are working on a BP de-duplication functionality in SAP CORM. We have implemented all the necessary steps for de-duplication. But, we are facing one issue while trying to initially index the data using program - 'SIC_BAS_RADII' using the following input parameters:
Field Name Entry
Object Type BUT
Object Subtype PARTNER
Index Pool Table BUT
Index Pool Field PARTNER
Service Name NORMALIZE_INDEX
Service Profile Profile defined in the configuration of the services
Once we execute this program, it keeps on running for hours. Even after that we are not getting any successful completion message or any report related to its success execution.
We also have option to index BAS_BUPA using t-code SES_ADMIN. Can this be considered as an alternative to program 'SIC_BAS_RSADRINI' ?
Please let us know where are we going wrong in our execution steps/input parameters. Anyone who has previously worked on this functionality, please help?
Regards,
Amit

Hi Amit,
To run the duplicate check you first need to activate the implementations SIC_ADDRESS_SEARCH of the BAdI ADDRESS_SEARCH and SIC_ADDRESS_UPD_TREX of the BAdI ADDRESS_UPDATE.
You can search for duplicates by creating/changing a business partner only if the previous created busines partners were indexed (in TREX) aftre their saving.
1. Activate both implementations.
2. For indexing in TREX you need a RFC-destination to TREX. This RFC destination should be maintained in TA SES_ADMIN as following:
Transaction SES_ADMIN   > Goto Customizing > System Settings.
Here should you enter the RFC destination for TREX.
3. After you maintained the RFC destination for TREX, start SES_ADMIN
   Index   > Create/Activate Indexes, select BAS_BUPA and press continue
4. Before you begin to work with checking duplicates you should do an initial indexing of the already existent business partners from BUT000. Therefore you should start the Report SIC_BAS_RSADRINI with the proposed parameters.
5. After that each saved BP will be indexed and will be available for checking duplicates by the creation of new BPs.
Please check: Transaction SES_ADMIN-> TREX Admin-> Queue Administration -> Function Set Queue Parameters
Select the Queue ID .....BAS_BUPA___1
and set the parameter Replicate After Synchronize   > On.
                      Schedule Time                  All-0:01
Eventually, you can start again the report SIC_BAS_RSADRINI and after 1 minute the data will be indexed in TREX.
You can have a look also to sap help:
http://help.sap.com/saphelp_crm60/helpdata/en/a3/eaa43ab9db4814e10000000a11402f/frameset.htm
I hope this help.
Thanks and regards,
Ita

Confusion on partner function of ALE process

Hi experts,
Now I am developing the ALE for message type ORDERS in inbounding process for testing purpose. Our customer is running their business in SAP and her company code is 6000 in her SAP system, and our company is vendor in her system, the vendor number is 1100. She create a purchase order and run the transaction code ME9F then the IDOC will send to our SAP system, and then the sales order is created in our system. Actually the whole process is OK. But I am really confused by the partner function setting and sales area setting in VOE4 and VOE2.
In VOE4, the setting is below:
Customer          Ext.Function         Name                            Exnternal partner          Int.no
6000                 SP                       Sold-to party                  6000                            6000
6000                 BP                       Bill-to party                    6000                            6000
6000                 PY                       Payer                            6000                            6000
6000                 SP                       Ship-to Party                  6000                            6000
In VOE2, the setting just like below:
Customer       Vendor number     Sorg.                   Dchl              Dv             Saty
6000              0000001100          1000                   12                 00              OR
We had to create a customer number 6000 in order to make the ALE process smoothly. So I just want to know:
1) We really need to make our customer number same as company code of customer in her SAP system if we use ALE ??
2) If answer of 1) is yes, then in our production system, the customer numbers are different from their company codes, what and how do you suggest to mapping the is relationship?? Use a user-exit in IDOC??
3) if answer of 1) is no, how can we make the ALE go next smothly??
Can any one give me a suggestion on above??? Thanks in advance.
Joe
Edited by: Joe.GR Chen on Jun 19, 2009 11:23 AM

hi,
to add partner function sales employee follow these steps:
1. img>S & D>basic functions>go to partner determination screen and select customer master and select your partner proceedure.
2. now double click on partners in partner proceedure and add partner function SE using new entries and save.
3. now assign the partner function to you account group and save
to create a sales employee goto t code PAL1 and create sales representative.
to add sales rep to your customer master goto your customer master using XD02 and in sales area tab goto partner tab and add the partner function SE and the sales rep number and save
regards,
krishna prasad

Transaction IB52 - GOTO - PARTNER

Similar Messages

Maybe you are looking for