Transaction IDX1: Port SAPQA1, client 500, RFC destination contain error

Hi experts
I am configuring XI for MM-SUS scenario, when I try to send Idocs from R/3 to XI I have this message:
Transaction IDX1: Port SAPQA1, client 500, RFC destination contain error
In XI transaction IDX1 I have maintened a port (MM_QA1) and RFC (MM_RFC) that points to R/3
In XI transaction IDX2 there is no entries
Some idea how to solve it?
Thanks
Nilson

Hi,
>>Could you clarify it for me, In XI side Transaction IDX1 I have a PORT and RFC destination to R/3?
Yes you are correct..
You should have done this..
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Define Gateway service
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
Thanks
SaNv...

Similar Messages

IDX1: Port SAPIDS, client 800, RFC destination contain error

hi
i changed the client on xi for idoc to file scenario.
in sm 58 iam getting following error
Transaction IDX1: Port SAPIDS, client 800, RFC destination contain error
regards viju........

VIJENDER SRIRAMOJU,
If you change the client on xi for that scenario, make the corresponding changes
in Idx1.
Also delete the entries from Idx2. (entries in idx2 are read automatically during runtime)
There is a howto on idoc scenario in sdn. Just go through that.
reg,

RFC Destination contains errors

Hello,
I am doing a IDOC - File scenario.
for XI :
RFC : R3RFC
Port : R3PORT
LS : XICLNT010
for R3 :
LS : CLNT090
RFC : XICLNT100
Port : XI100
When the IDOC was sent, its showing up in green color but when I go to SM58, I see the error message, " Transaction IDX1: Port SAPB999, client 800, RFC desestination contains erorrs "
But when I click on remote logon, the RFC is taking me to XI start sap access screen (same is the case with XI RFC connection, working as expected)
No messages were shown in SXMB_MONI
The port specified in the error message and the actual port varies.
Checked in port... specified a proper RFC destination.
Where are the things going wrong?
Checked previous answered posts related to the same and tried few things from them
dint work out..
Help !!!
thanks
Nikhil.

Hi,
Check the User you are providing in RFC Destination is Exist & have the Proper Authorizations
In XI Side RFC Dest::
Give the User name & PWD in RFC Destination , Which you are using for R/3.
In R/3 Side RFC Dest:::
Similarly Give the User name & PWD in RFC Destination , Which you are using for XI
Regards
Bopanna

Error: Transaction IDX1: Port SAPZ52_002, client , RFC destination contain

Hi,
I have a Scenario WebSphere MQ to IDoc. I get the following message in SXMB_MONI when trying to send data.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPZ52_002, client , RFC destination contain errors</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Transaction IDX1: Port SAPZ52_002, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have testet my RFC connection in SM59 and it seems to work fine.
Hope anyone can lead me in the right direction.
Regards,
Morten

I have the following setup:
IDX1:
-Port: SAPZ52
-Client: 002
-RFC Destination: Z52CLNT002
SM59:
-RFC Destination: Z52CLNT002
-Connection type: 3 ABAP Connection
e.g.
Successfully when testing in SM59
Receiver Communication Channel:
-Adapter type: IDoc
-Transport Protocol: IDoc
-Message Protocol: IDoc
-Adapter Engine: Integration Server
-RFC Destination: Z52CLNT002
-Port: SAPZ52_002

Transaction IDX1: Port SAPCP0 client , RFC destination contain errors

Hi Experts,
I am getting following error in SXMB_MONI in IDOC to JDBC scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPCP0, client , RFC destination contain errors</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Transaction IDX1: Port SAPCP0, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
i have created port in idx1 and i imported the idoc in idx2 and i have created rfc destination to R3 in XI, RFC destination is working fine.
Can anyone help me out of this.
Kind Regards,
Praveen.

hi,
>>><SAP:Stack>Error: Transaction IDX1: Port SAPCP0, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
>>>i have created port in idx1 and i imported the idoc in idx2 and i have created rfc destination to R3 in XI, RFC destination is working fine.
this means that you're checking an incorrect RFC dest
- open IDX1
- click on port SAPCP0
- double click on RFC dest which is over there to open it
- ctrl+F4
does it work?
Regards,
Michal Krawczyk

Transaction IDX1: Port SAPPRD, client , RFC destination contain errors

Hi all,
when I send an IDOC from Xi to R/3 I get the following message in XI monitoring:
Transaction IDX1: Port SAPPRD, client , RFC destination contain errors
ERROR= 2:IDOC_ADAPTER(151)
However everything is maintained correctly (i think) in IDX1. I can upload the IDOC metadata with IDX2 from the R/3 system.
I seems that Xi doesn't have the clientnumber available. (should be 600) but is not mentioned in the error.
Did I miss something?
Thanx Ron
Message was edited by: Ron van der Sterren

Hi Ron,
Settings in XI side.
1. Create the RFC Destination(SM59) with connection type 3, pass the target host pass is R/3 server name and logon tab enter the R/3 logon details.
Test the connection is success and check the Remote login button it's connecting the R/3 system or not.
2. Create the Port IDX1 and pass the client number is (R/3 client) and pass the RFC destination which you created above.
R/3 side
1. Create the RFC Destination(SM59) with connection type 3, pass the target host pass is XI server name and logon tab enter the XI logon details.
Test the connection is success and check the Remote login button it's connecting the XI system or not.
2. Create the TRFC port to transfer the IDOC'S and pass the RFC destination which you created above.
3. create the logical system in BD54 this name should be same as XI logical system name.
4. Create the partner profile (WE20) and partner type is 'LS' with inbound parameters and pas the appropriate values.
Let me know if you have any issues.
Regards,
venu.

Error: Transaction IDX1: Port SAPRP1, client ,RFC destination contain error

Hi All,
I am faceing the problem while executing the XI ,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
============
It is showing this error and the idoc is not posting to the SAP. When i checked out the IDX2 i am not getting any such structure of our IDOC type, So do i need to create the structure manually, or will it create automaticallywhen the idocs willposted .
Is there any import and export option for this.
Please treat this as urgent , thanks in advance...

Hi Jay,
how did you create port using IDX1 ,I think you must have to follow the naming convention there.Any user given name might not work.
I think in your case , create port as SAPRP1 using IDX1.
can you you give a try with that.port name exactly same as SAPRP1.
you may also refer this link
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm

RFC Destination None Error for MIGO

Hi,
I am getting RFC Destinatnation NONE error while posting Goods Receipt. GTS service for SD and MM is not active. Error showing for FM GRC01_COST_OBJECT_COST.
Can any one help in this regard.
Thanks in advance.
SP Raj

Hi,
Pl find the details below of the error.
Short text
    RFC destination "NONE" does not exist.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLCK36" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The 'destination' "NONE" for a Remote Function Call
    is unknown.
    You can display the RFC destinations available in the system using
    the transaction SM59.
Trigger Location of Runtime Error
    Program                                 SAPLCK36
    Include                                 ISAUTO_CK_SAPLCK36============E
    Row                                     812
    Module type                             (FORM)
    Module Name                             PRICE_STRATEGY_NEW
806 ************************************************************************
807 *     DOERNER, GRC, 10/11/1999: Add one new strategy:
808 * 3b. Create costestimate during goods receipt
809 ************************************************************************
810     when 4.
811       if k_debug_loc is initial.
>>>>>         call function 'GRC01_COST_OBJECT_COST' destination 'NONE'
813                 exporting
814                      im_vbeln     = f_mtcom-vbeln
815                      im_posnr     = f_mtcom-posnr

IDX1 - Port for Subsystem?!

Hi guys,
well i gonna receive an IDoc from EDI-Server in native IDoc-Format. This i want to just route through without mapping (IDoc-Tunnel).
a. In IDX2 i imported the meta-data for the IDocs which will be received.
b. I made a RFC-Connection Type T pointing to a registerd Server-Program (Connection Test etc. works fine)
b. in IB Design i imported the IDocs
c. in IB Directory i configured a Sender-Channel
When we try to send an IDoc to XI, in my understanding the IDoc-Adapter listens on the RFC and will work with the IDoc. But i guess we forgot sth. because we receiver this error:
<i>Code 3 (RFC_SYS_EXCEPTION) reported from RFC interface at RfcIndirectCall(IDOC_INBOUND_ASYNCHRONOUS) with TID=0A5E0F0B3E94470D2F67173F
rfc_error_info.message="Transaction IDX1: Port EDI_Test, client 100, RFC destination contain errors"</i>
In the Idoc we posted EDI_Test in the Header-Data for SNDPOR. This error seems to point to IDX1 entry but what should i enter there?! Because the Client is mandatory...
Could u give me a hand?! What is wrong in my understanding?!
br

Hi Sarvesh, well i am nearly desperate on this.
We have to use tRFC because of a Unix-Program on the EDIServer which connects to the RFC-Destination. As described, the connection seems to work.
However, because i am not able to test sending an IDoc from the EDI-System on my own i always have to check the EDI-Guy to send data for testing purposes. Well it's not working yet and i am still not getting what might be wrong.
Even when i give the SNDPOR from WE21 in target R/3 its not working and we get always the same Error message. Again i gonna list what i have done:
<<[all motivated by the IDoc-Tunneling blog from Michal]>>
a. Port added in IDX1 , called EDI_Test and Imported IDoc-Metadata from another R/3 System in IDX2
b. I created a RFC-Connection Type T pointing to a registerd Server-Program (Connection Test etc. works fine)
b. in IB Design i imported the IDocs
c. in IB Directory i configured a Sender-Channel
The EDI-Guy i gave the port-name in XI called EDI_Test but i guess he don't have to use this. Instead he should use Port from target R/3?!
Target R/3 configuration:
a. Working RFC-Connection to XI
b. WE21 'ZXI' for connecting to XI-System
c. WE20 Partner-Type LS, called EDI with outbound-parameter DESADV
So do u think port ZXI should be entered by EDI-Guy for sending the IDoc to Target via XI?!
sorry for my disqualification but its first time i deal with this scenario....
br

RFC Destination

I am doing a file--> XI --> IDOC R/3 4.6 scenario.
R/3 is there in SLD as business system with role as app system and the correspong logical system is maintained in SALE.
Do we still need to create an RFC destination for R/3 client in XI system. In ta: IDX1 in XI system, there is no port created for R/3.
When I test this scenario I got the follwing error.
Transaction IDX1: Port SAP_XIXXX, client , RFC destination contain errors.
Here port SAP_XIXXX is the tRFC port created in R/3 system by giving the RFC destination created in R/3 for XI system, which we want to use later to send an IDOC to R/3. I am assuming I dont need this port at all to post an IDOC to R/3.
Please advise.

Here is my scenario...Sending a file from XI client 105 through XI Server which will be posted as an IDOC in R/3 client (File-XI-IDoc).
In XI:
Created RFC Destination for R/3 client (SM59)
Created Port in IDX1 for R/3 client and loaded metadata in IDX2
As in my receiver agreement, I already specified sending service as XI105 and receiving service as R/3client....
Do I need to create partner profile(WE20) for R/3 Client in XI Server?
Do I need to create partner profile(WE20) in R/3? If, yes, then the partner number in R/3 client should be my business sytem sending the file(XI client 105) or my XI Server client?
Also, since no Acknowledgement is reqd, I did delete the port I created in R/3 for XI Server. But, I am still getting the following error..
Transaction IDX1: Port SAP_xxx, client , RFC destination contain errors.
Here SAP_XXX is the port for RFC destionation pointing to XI, in R/3 client, which I deleted.
Thanks,
Steve
Message was edited by: Steve Hsu

Interface RFC destination Error

Hi, while testing our interfaces we get this error, Stack>Error: Transaction IDX1: Port HED_020, client , RFC destination contain errors
We have checked IDX1 and SM58/59 and cant find any error.
Has anybody come across this before?
Thanks

Where do you get this error? In MONI or in SM58?
Make sure that the User Id in the RFC destination has the authoizations to post Idoc's.
Make sure that the receiver Idoc adapter has a valid Port name and RFC destination values as created in IDX1 and SM59
Regards
Bhavesh

Declare rfc destination to receive idoc

i am trying an example to declare rfc destination to receive idoc. the directions say to create a new destination of type "L" with the name INTERNAL and desination NONE. When i try to create a new rfc desination with destination NONE is says there is already one there but it is of type "I". It will not let me change this to type "L" and I cannot delete it.
Any idea how to do this???
Also when I create it says give a name of INTERNAL but i see no field which says "name".

hi,
u shud create rfc dest tye: R/3 connections...that is type 3.
refer this:
R/3 side settings
1. SM 59 (RFC destinations)
Create a RFC destination pointing to the XI server. The connection type : R/3 connection. The target host: the XI server.
2. WE 21 (Ports in IDOC processing)
Create a transactional port. Give the RFC destination created in this.
3. BD 54
Create a logical system.
4. WE 20 (Partner Profiles)
a. Create a new partner profile under partner type LS.
b. Assign the message type in outbound parameters.
c. Open the message type (Dbl click) and configure the receiver port to the port created.
XI side settings.
1. SM59 (RFC destination)
Configure the RFC destination pointing to the R/3 system.
2. IDX1 (Port maintenance in IDOC Adapter)
Create a port and provide the RFC destination.
[reward if helpful]
regards,
latika.

RFC Destination type for IDOC to FILE

Hi,
wat is the RFC Destination type for IDOC to FILE ?
jeff

hi,
u shud create rfc dest tye: R/3 connections...that is type 3.
refer this:
R/3 side settings
1. SM 59 (RFC destinations)
Create a RFC destination pointing to the XI server. The connection type : R/3 connection. The target host: the XI server.
2. WE 21 (Ports in IDOC processing)
Create a transactional port. Give the RFC destination created in this.
3. BD 54
Create a logical system.
4. WE 20 (Partner Profiles)
a. Create a new partner profile under partner type LS.
b. Assign the message type in outbound parameters.
c. Open the message type (Dbl click) and configure the receiver port to the port created.
XI side settings.
1. SM59 (RFC destination)
Configure the RFC destination pointing to the R/3 system.
2. IDX1 (Port maintenance in IDOC Adapter)
Create a port and provide the RFC destination.
[reward if helpful]
regards,
latika.

Which port is using by RFC connection

Dear all,
Which TCP port is using by RFC connections? Port of GW?

RFC Destination
gsgfsgfsgf
Connection Type 3 ABAP Connection
De
Description 1   asdfasdf 001 for QA dfasdf Concession (Loadb
Description 2
Description 3
Load Balancing
Target System   HAS
Msg. Server
hasdgsd
Group
fdff
Save as
sdafsdf
Gateway Host
Gateway service

Delete RFC-Destination 'None' - Urgent

hi all,
I have a problem with the RFC-Destinations. In the Transaction SOLUTION_MANAGER i got the message "RFC-Destination NONE does not exist".
But I have created the Destination.
Then I found the SAP Note 61888.
description:
If the destinations NONE, BACK or SAPGUI are inadvertently deleted, they must be recreated:
NONE : Type I, no further entries
But I cant recreate this Destination, I got the Message: "Not possible. Internal Connections will be generated".
Can please someone help me. It worked 8 weeks and now I got this failure.
Thx
LM

have a look at this sap note: 181591
"Each time an application server of an R/3 System is restarted, the RFC destinations of type I (internal connection) in this R/3 System are maintained again. The following rules apply:
1. There are always the destinations NONE and BACK which point to the respective application servers themselves."
maybe the restart will take care of it?
read the SAP note please
Regards,
michal

Transaction IDX1: Port SAPQA1, client 500, RFC destination contain error

Similar Messages

Maybe you are looking for