Transaction IH01 to support custom fields added to via enhancement ITOB0001

Hi,
Is there any easy way to modify the field selection/catelog in transaction IH01 to include Z fields that have beed added to functional locations table IFLOT via enhancement ITOB0001?
Is there an IMG activity, enhancement, user exit, BADI, etc that can be used to extend the ABAP list structure RIHIFLO and ultimately populate table TIH01 so these fields can be supported via standard PM reporting functionality (IH01).
Regards
Adam Gunn

Hi
That is simple, go to smod t.code and here press the f4 key on enhancement field then u will get the popup here u can enter the package name of VA01 and you will get the list of enhancements under sales order. so you can select which is your requirement related. ok !
Thanks
Ganesh

Similar Messages

How to handle Custom field added in BP : Role Bill Account

Hi Friends,
I am working on an interface which creates Bill Account role for a BP but the problem is there are about 15 Custom fields added to standard BP transaction in BA role.
As I am using BAPI_BUPA_FS_CREATE_FROM_DATA2 for creating the BP and
BAPI_BUPA_CENTRAL_CHANGE for changing the BP role Bill Account?
Can anyone tell me how to handle those custom fields in the existing BAPIs or there is some other way of doing it?
Thanks in advance,
Pradeep
Note : Helpful answers will be rewarded.

Hi,
I have seen these BAPIs but are they used with normal BAPIs for BP creation and change.
For example : I create the BP using BAPI_BUPA_FS_CREATE_FROM_DATA2 and for the Custom fields I should use these BAPIs as suggested by you alongwith the create BAPI.
And will it work for Changing the BP also.
Kindly clarify.
Regards,
Pradeep

F4 help for a customer defined field added as structure enhancement

I am trying to get the F4 help on a customer defined field added as structure enhancement. This can be achieved by programming the "F4IF_INT_TABLE_VALUE_REQUEST" (as I have data in an internal table) in the Process On Value-Request event. The problem is because it is a customer field addition as structure enhancement. I am not sure where I should put this code segment to make it work. Any help would be highly appreciated.

Could you create a search help and attach that to the data element of your field, and then populate the data using code in the function exit of your search help if it cannot be directly read from a table or view?
This would remove your code from the SAP dialog program. The only mod you may need to make is to add / flag the search help on the screen field.
Andrew

Defaulting a customer field (added through EEW) while bus. obj creation.

Hi All,
There a customer field added through EEW.
Now suppose when we are creating an object (BUS2000170, in my case) this customer filed value should be set the a default value. Under GENIL_MODEL_BROWSER i can see this filed in 'BTitemcustext'.
I am trying to do it through EVENTS (by calling a FM after AFTER_CREATE event) but i could not find 'BTitemcustext' in the table type CRMT_EXTENSION_COMT.
Now i dont know where to set this value.
Can anyobe please help on how we can set default value for fields developed through EEW.
Thanx,
Abhi.
Edited by: abhishek ranjan on Jan 7, 2011 10:11 AM

Hi Rajni,
This BADI will only be called when i will save the order.
I want to set the default value the moment the object is created. Thats why i wanted to do it through events(CRMV_EVENT).
The reason being suppose the order is not saved , till then this default value will not be visible in the UI side(Even after the object creation).
Also where i can set this default value??
I mean this field is available under the model 'BTITEMCUSTEXT'. Also the filed is not visible in the table type for extensions (CRMT_EXTENSION_COMT).
Please let me know i am wrong.

FM for CUSTOM FIELDS added in BP transaction

Hi all,
We have added few custom fields in the BP transaction.
Now the thing is we need to update those using Function module.
Could any one please help me like in which Function Module can i found those
fields once i add in the BP transaction?
Thanks and Regards,
Gopinath A

Hi Gopi,
Have you used EEW to add these fields?
There should be a function module(s) generated for this new fields which you can use to update this fields? Probably something like
'BUPA_CENTRAL_CI_CHANGE'
Hope this helps.
Surendar

Custom Fields added to Project Definitions transaction (CN42N)

In the Project Definitions Overview transaction (CN42N), it was requested that we add custom fields to table PROJ. The fields added were Responsible Analyst Name/Analyst No. and Responsible Accountant Name/Accountant No. We have created two Z tables, one for the Responsible Accountant info, and one for the Responsible Analyst info. These Z tables have been populated with the necessary data, no problems. The Issue is that in table PROJ, only the Responsible Account No., and Responsible Analyst No. is displayed, and not their respective Names. Why are they populated in the Z table but not in table PROJ?

Hi,
First thing is when your are saving number are you also saving description from your Ztable to proj table zfields for description? For this I assume you have also added description field in PROJ table.
Also I am wondering why you want to store description in PROJ table. You have number in PROJ table and when ever or where ever you want you can pick description from Ztable. This will help to maintain consistency in logng term.
Say for example today you have description ABC PQR XYZ in Ztable and while saving this description will be saved in PROJ. Later due to some reaosn you changed description to ABC UVW PQR in Ztable. Now you see the description will be different in PROJ and Ztable. Hence I would just maintain number in Proj and get description always from Ztable. Hope this makes sense.
Enjoy SAP.
Pankaj

0CO_OM_OPA_6: Custom fields added, Data - available in RSA3, but not in PSA

Hi Friends,
I have added some custom fields to the 0CO_OM_OPA_6 data source. Following are the details.
1) Custom fields: ZZEBELN (Purchasing Doc), ZZUSNAM (Username)
2) Code populated in SE19 (BADI for this Datasource)
3) RSA3: Test extraction pulls the records for both the custom fields correctly.
4) RSA5, and RSA6 - Fields are unchecked for hidden and field only. They are made available.
5) Extract Structure replicated into BW and its pulled over from extract structure into Transfer structure.
6) Mapped to corresponding fields in BW update rule and transfer rules. (No routines or formulas exist)/
7) When load extracted into BW, data is blank for both the fields in PSA itself.
Our BW is 7.3 but we still use this datasource as 3.x transfer rules and datasource. In BW, it is connected to the Cube 0OPA_C11 via update rules and 3.x transfer rules only.
Is there any reason for the data being populated into the RSA3, where as not into PSA. Please consider the above points, and let me know if I have done or missing anything here in my steps. I have gone thru several forums and havent got any specific replies for such issues. Have you come across such issues, please share your thoughts and views.
Any of your replies will definitely help. Really appreciate your inputs.
Thanks!!
Prasith

Hi Prasith ,
After reading all the answers , what i feel we are missing a major step ie Re-initialization of the cube .
As you changed the extract structure and added new fields and for this Data source i assume that deltas were running already , the BW system cannot pull these new fields directly from ECC unless you have not done a re-INit again .
The Re-init is pretty simple and not as complex as LO.
I would advise you to re-init for 01.2014 till 016.9999 , run full load and then delatas will flow in later on . Check during the full load if you are able to see these fields in BW in (PSA/ Cube) .
But be careful you need to do Re-init only on week ends when there are no transactions happening else you might end up in duplicate data .
Hope this helps !
Let me know how it goes .
Regards
Zeenath

How to change the Tab name for a custom field added in IC Winclient

I have successfully added a field using eewb and it is appearing on my transaction in CIC0 but it is on a tab that says Customer Fields. In EEWB a BADI called ZEEW_CUSTOMER_H01 was generated and it has a methods called CRM_CUSTOMER_H_SET_TITLE. It indicates you should be able to use this to rename the tab but the method is empty. Anyone have an example of the code you pass in to rename the tab screen. Thanks, Lisa

>>and how will it effect in the report?
You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
~Suresh

A custom field added in BAPI_PO_CREATE and BAPI_PO_CREATE1

Hi,
I am trying to create a Service Purchase Order Single Account Assignment.
A Custom field ZZEXPTYPE(Expense Type) is added in BAPI_PO_CREATE and passed the value '9015', The PO Is created Successfully but when I add same Custom Field ZZEXPTYPE(Expense Type) in BAPI_PO_CREATE1 whose value is '9015' ,It throws an Error Message as " Please enter a valid (SBU Specific) expense type!" .
The functional consultant says that Expense Type '9015' is correct. please Let me know what must be done.
Regards,
Deepthi.

Extension to add Expense Type only
      IF NOT w_src-zzexptype IS INITIAL.
        w_extensionin-structure = 'BAPI_TE_MEPOHEADER'.
        w_extensionin-valuepart1+10(4) = w_src-zzexptype.
        APPEND w_extensionin TO i_extensionin.
        CLEAR w_extensionin.
        w_extensionin-structure = 'BAPI_TE_MEPOHEADERX'.
        w_extensionin-valuepart1+10(4) = 'X'.
        APPEND w_extensionin TO i_extensionin.
        CLEAR w_extensionin.
      ENDIF.
Call BAPI
      CALL FUNCTION 'BAPI_PO_CREATE1'
        EXPORTING
          poheader          = w_poheader
          poheaderx         = w_poheaderx
        IMPORTING
          exppurchaseorder = gv_ebeln
        TABLES
         return            = i_return
         poitem            = i_poitem[]
         poitemx           = i_poitemx[]
         extensionin       = i_extensionin[].
Commit the Transaction
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING
         WAIT          = 'X'.

SRM 7.0 New custom fields added to view do not appear in the component conf

Hi
I added two custom fields to the view V_QTE_DOFC_I_DESC of the WD componenet /SAPSRM/WDC_DODC_QTE_I_DS. This view gets called when bidder is trying to create a bid and clicks on add Substitute Item in the Item tab. This view is simply a popup window where we can enter ther substitute item.
I added two custom fields to the context of the above view and placed on the layout of the view as input fields. Then I tried to modify the component configuration /SAPSRM/WDCC_DODC_QTE_I_DS_SUB. When I look in t he web dynrpo built-in for the view V_QTE_DOFC_I_DESC, I don't see the custom fields that I just added. As a result, these custom fields are not displayed when I try to substitute an item. Could anyone tell me how to brining in these two custom fields into the component configuration.
Any help is greatly appreciated.

Hi Prasuna,
Sorry ..You are right..I was looking at some other WDC related to contract data..It you map the CUFs to /SAPSRM/S_CLL_CTR_ITEM which has the include structure INCL_EEW_PD_ITEM_CSF_CTR then it should work fine.
If you do this, are you able to view the new fields on the screen?
you mentioned that you are not able to save the data to the table.
Include your fields in INCL_EEW_PD_ITEM_CSF as well because if you add CUF to any of those doc types, you also have to add those CUF to the global structure for CUF documents.
Also Check if you fields are there in structures BBPS_CTR_CUF_ITEM,BBPS_CTR_UI_ITEM and BBPS_CTR_ITEM.
Check whether you have implemented the BADI's like BBP_DOC_CHECK_BADI ,BBP_DOC_CHANGE_BADI and BBP_DOC_SAVE_BADI . check out the structures (whether they having the CUFS) used in those if you have implemented any of them .
Regards
Lavanya
Edited by: LAVANYA CHAVA on Aug 25, 2010 10:10 AM

Search help for custom fields added through BADI_FDCB_SUBBAS04

Hi guys
I have two cutom fields on basic data screen that i have added using an implementation of the BADI
BADI_FDCB_SUBBAS04
I want to use the value entered in one of the fields as a import parameter in another fiields search help. On value request the structure INVFO contains the other data entered on screen in the basic data screen however my custom fields appear empty.
However if i press enter and request values again the search help will pop up correctly. Is there a way i can avoid having to press enter before i can get my values??
regards
Isaac Prince

Hi guys
I have not found any notes/texts regarding my issue however i think with some user training/re-orientation the small issue will go away.
regards
Isaac Prince

Custom Field added by AET isn't editable

Hi all,
I added a custom field in service request by AET.
the problem is that it is not editable.
Can anyone help me?
thanks in advantage.
Enzo

I solved. I take the wrong BOL.

Custom field added in Module pool is not reflecting in SRM Shopping cart

Hi all,
I have to add a custom field for Plant in the Ship-To address subscreen(BBPSC01) in Shooping cart in SRM.
I have added the field in the program "saplbbp_sc_ui_its" in screen 310.
But I think need to write the HTML code/Java script in HTML template to trigger the code from module pool.
As I am new to this scenario, can anyone please let me know the procedure to follow.
Thanks,
Rakesh.

Hello Anubhav,
If your new customer fields are not displayed dynamically, re-generate Dynpro concerned using report BBP_DYNPROS_GENERATE.
Regards.
Lauurent.

Problem in delta management for custom fields added in standard Table

Hi developers,
we have a problem, when a sales order is modified in a field custom, added in tables (VBAP-VBAK), the delta BW doesn't recognize the modifications. The data type of these fields haven't the flag (Change document) setted in
view Definition.
If this flag is setted, Can the delta BW recognize the modifications of the custom fields?
Best regards
Domenico

You cannot get delta by just appending fields to extract structure & writing the user exit coding as this user exit code is run by the extractor after the X- and Y- tables are compared to create the before & after images.
You have to do this procedure by enhancing LIS comm structures like MCVBAP (for example).
Please refer to OSS note 576886 for complete details.
Kumar Gudiseva.

Sample code for a custom field added to LIS Communication structure for Del

We appended a new custome field into extraction structure of the LO Cookpit datasource 2LIS_02_ITM through RSA6. And then run CMOD to write the exit code to populate the value and it works fine. But after we read Roberto's Weblog:
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
Find the enhancement we did can't make the Delta mechanism works if only this new field gets changed in a record, and the change cannot be reflected on BW. I know we can run SMOD on the enhancement LEINS001 to write the code for LIS Communication structure customer exit. But we have never writen such a code for LIS Communication Structure enhancement and also don't know on how to make the Delta mechanism works in the code. We would be very appreciated if some expert here can provide the sample code!
Thanks

hi AHP,
Have you tried Sanyam's code listed in this article you recommended?
Now our R3 team has added a custom field called ZZZ to EKKO table and I modify the code to suit our need and the code would be as following:
*& Include ZXM06U16 *
DATA: i_t_ekko LIKE ekko OCCURS 1 WITH HEADER LINE.
DATA: ebeln LIKE ekpo-ebeln,
it_ekko TYPE TABLE OF ekko WITH HEADER LINE,
old_val(50) TYPE c. "For storing the value from the Field Symbol
FIELD-SYMBOLS <fs> TYPE ANY TABLE.
CASE zeitp.
WHEN 'MA'. "When creating a purchase order
MOVE '(SAPLEINS)T_EKKO[]' TO old_val.
ASSIGN (old_val) TO <fs>.
i_t_ekko[] = <fs>.
LOOP AT xmcekko.
ebeln = xmcekko-ebeln.
IF xmcekko-supkz = '1'. "Old Value ?
SELECT SINGLE * FROM ekko INTO it_ekko WHERE ebeln = ebeln.
xmcekko-ZZZ = it_ekko-ZZZ.
ELSE. "New Value ?
READ TABLE i_t_ekko WITH KEY ebeln = ebeln.
xmcekko-ZZZ = i_t_ekko-ZZZ.
ENDIF.
MODIFY xmcekko.
ENDLOOP.
EndCase.
The compile of the above code works fine and we activated everywhere including project level. Then we set debug points in this code, and run RSA3 on 2LIS_02_ITM, but find the extraction program never reaches this code or call this user exit function EXIT_SAPLEINS_001 of this enhancement LEINS001. Any reason?
Thanks
Kevin
Message was edited by: Kevin Smith

Transaction IH01 to support custom fields added to via enhancement ITOB0001

Similar Messages

Maybe you are looking for