Transaction ii views limitaions

while processing the transaction iview we will provide user with one transaction code in the details of iview,so my issue is when i see the preview of it i must be able to see only that transaction i have provide in the iview details .if i give /n <other transaction> also i must be restricted to the only one transaction that is given in ivew . how to do this .even did we can do any changes for preview of r3 transaction i view through the porta ,i want to remove the menu bar form portal.
regards
ravikanthvemuri

Hello Ravi,
You can refer to the following article.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/portal-and-collaboration/_d-f/displaying%20sap%20transaction%20as%20internet%20application%20in%20portal.pdf
Also You can refer to SAP Note: 1010519
Regards
Deb

Similar Messages

Transaction to view the Batch Stock as on any date

Is there any Transaction to view the Batch Stock as on any date?
Regrads
Soumen

I had already tried this. But it does not show the batches, it shows the material docs with batches.
I want like this:
Material Batch S Stock
Regards

Is there any transaction to view the customer master data ...

is there any transaction to view the customer master data ...i me all the datats so that ui can prepare a report......

Hi Sunaina Kumar,
From Funtioanl Point of view
XD02 or Xd03 - Chane / Display Customer Centrally ( With Company Code Data)
VD02 or VD03 - Change / Display Customer - Sale and Distribution( With out Company Code Data.
From Technical Point of View:
SE11 or SE16
Table Name : KNA1 or KNB!
From here you can view all the customer data.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Transaction to view infoset in SAP R3

Hello all,
Can any one tell the transaction to view infosets in SAP r3.
regards
kaushik

Hi,
Tcode For Infoset is SQ02.
See the below links...
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40bec8da-4cd8-2910-27a9-81f5ce10676c
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
Regards,
Raj.

What is the transaction to view all the customer,i want customer list

Hi All,
Is there any transaction to view all the customer pertaining to a single comany code.
Thx
venu

Dear Venu,
Try using T-Code - S-ALR_87012179.
This would give you list of Customer for a customers.
Or else,
Go to SE16 & enter tabke KNA1.
Here you can gget list of all Customer codes, names & other details.
Hope this helps,
Reward if useful...
Thanks,
Jignesh mehta

When to create SAP IAC i-view and SAP transaction i-view

Hi Gurus,
Could you please tell me when to create SAP IAC iview and when to create SAP transaction i-view.
Regards
Indranil

Indranil,
check this from one of the threads
Transaction iViews as the name suggests point to SAP transactions. These iViews can be presented in three flavors out of portal - Win,Web and Java GUI. All have their different advantages. One rule of thumb I have been followins is that if the SAP transaction has a lot of user input go with WinGui (talk to users who use these transactions the most and find out what GUI would make them more happy)
WebGui is pretty good in scenarios where the transaction is going to be mostly getting the information a some little interaction. Haven't had a chance to try Java GUI.
Now about IAC or internet application component iviews. These iviews mostly point to services based on ITS i.e. web applications which are served thru ITS. How are they different from SAP transactions served thru webgui is that these have more web like look and feel. A good exampple of this kind of application is Shopping Cart in the Enterprise Buyer Professional. The web like look and feel is given by the service files in ITS.
some questions
1. Is one preferable to the other?
ans: Please read above
2. Is there a corresponding IAC for every SAP Transaction?
ans :No
3. Can either use WebGui or WinGui mode?
ANS: IACs don't have wingui mode.
4. Why do IAC Services need to be "activated"?
ANS: Otherwise they won't be published to ITS and you cannot access them.
Thanks
Bala Duvvuri

Tag Transaction to View cluster

Hi Experts,
Can anyone please tell me on how to tag transaction to View cluster ???
thanks,
Govind

Hi,
[Go through this link. It might help you.|http://help.sap.com/saphelp_nw04/helpdata/en/7e/c81d9052c511d182c50000e829fbfe/content.htm]
Abhijit

Call sap transaction in view element

Hi together,
I'm a WD beginner.
So I want to know how can I start/show a sap Transaction in a UIElment. I don't want to start an external window.
I searched a Long time here in SCN. Some guys said it is not possible ?!?!?!
Thanks a lot
Wolfgang
PS: I want to create a tabstrip element. In one Tabstrib I want put a view element in it. In this element I want to Show a Special SAP Standard Transaction to Show data. The Transactions runs if I create a new window. BUt we think it's not user friendly to create a new view.

Hi Steffen,
You can achieve your requirement as below
Create an ui element "IFRAME" inside the tab and bind the source to a context attribute URL
Generate the URL for your t-code and set the value to context attribute URL
You can refer my answer in the below link
ITS server in ABAP Webdynpro
Hope this helps you.
Regards,
Rama

Transaction I view for WebGui(Html) creation problem

Hi All,
I am creating a transaction Iview for WebGui, I am done with I view creation part but when I open the I view its giving
<b>No switch made to HTTPS; so it is unsafe to send your password</b>.
SSO between was and ecc is working fine. I read postings related this issue. No one is able to get the proper solution. I mean why it is happening and how to fix it. Please let me know if any knows how to fix this.
Thanks
Keerthi

Hi keerthi,
SSO is between???
and also one more thing check the preview of IVIEW, if iview is perfect then i dont think so there is any problem.
Thanks
Purav

Parameter transaction for view maintenance

Hi there, please help
I've created a parameter transaction(ZTRN) for a view maintenance(ZVIEW) with the ff
Skip initial screen = X
VIEWNAME = 'ZVIEW'
UPDATE = X.
How can i change this transaction/view so that only 1 record can be maintained, i.e how/what
parameters to provide before calling the transaction so that only one record can be maintained. With the above settings all records are displayed.
I've tried using UPDATE_LTD = X but its not helping either.
Thanks in advance

I don't think this is possible in the way you want it to. What you could do is use the standard events provided by the maintenance view. In these event create a check that only one record can be changed or even displayed.
I don't have a SAP system to give you an example but I can refer you to this:
[Maintenance events|http://help.sap.com/saphelp_nw70/helpdata/EN/91/ca9f0ea9d111d1a5690000e82deaaa/content.htm]
Edited by: Micky Oestreich on Aug 6, 2008 2:41 PM

Transaction to view the incoming emails into SAP system

Hi Experts,
Just like SOST for viewing outgoing email from SAP, is there any transaction exist to view the incoming emails into SAP system. Any comments on this concept is most welcome.
Thanks in advance,
Viven

Check the T_codes in the package SO. All we have is in that package. I doubt except SAPoffice there is something. this should be handled by the Exchange server.
Amandeep

Transaction Codes View

Hello
I am not a basis person but trying to learn on myself, I have been making users and profiles and assinging them, I follow the same procedure everytime but still there is difference in respect to view of transaction codes i.e. the end user is not able to view the transaction codes but only the respective texts related to them appears to them for some users and some users can see both Tcodes and texts. Please help me as I want that the end users are able to see Tcodes also.
Thank you
Bhavna

Hi,
I think you are searching for the personal setting every user can choose.
Try select the menu "extras" => "settings", and in the following popup window select then "display technical names".
After this you will see transaction codes and texts in the menus.
Hope this helps
Regards
Rolf

Transaction numbers viewed by user

Hi experts
I am working on CRM 6 for a public sector client. Here we got a requirement to know if the transaction record has been viewed by any user. I know as per standard sap, if some one make changes to traction record, it will be captured in transaction history, But Is there any standard report to see , how many users (or which user) has seen the transaction record.
Thanks in advance
Surya

Hi Teja,
I don't think that is possible as per SAP transaction model.
I think it can be achieved on the UI level using JS etc as you would normally see on some common websites which feature " this website has been viewed by XXX number of people"
Thanks

Creating Z transaction from view cluster

Hi All!
I had created view cluster using SE54.This view cluster contains check tables to be maintained by the user.
Now my problem is how to attach these view cluster to a Z transaction through SE93.In production se54 is not available and i have to attach this view cluster to the Z transaction so that selected users are restricted to use this view cluster.
Regards
Praneeth
Points will be rewarded
Message was edited by: Praneeth kumar

Hi Rusidar,
You can actually use the transaction code SE93 to launch a view cluster. Say you have a view cluster: MYVC. Here is how you can create a transaction code to display this:
1. Execute transaction SE93.
2. Enter the desired transaction code in the input field, say MY_TCODE.
3. Click on 'Create' button. A 'Create Transaction' popup will open. In this popup, enter the short text for this code and choose the last radio among all radios which says "Transactions with Parameters ('parameter transaction')" and click 'OK'.
4. In the resulting screen, enter 'SM34' as Default Value for transaction. Then add the following two entries under 'Default Values' section (this section is located towards the end of the screen):
Name of screen field Value
SHOW X (means simulate click on 'Display' button
VCLDIR-VCLNAME MYVC ( This is the technical element that corresponds to the input field in the screen of transaction sm34).
5. Check the checkbox 'Skip Initial Screen'.
6. Save the transaction code.
Try running the code. If your cluster view already works via sm34, it should execute....
Cheers....
Regards,
Shiromani
Edited by: Shiromani Raj Sharma on Dec 26, 2007 10:33 AM

Transaction FD02:Viewing customer created by Idoc DEBMAS06

Hi eveyone,
I am currently working on Inbound Idocs IDOC_INPUT_DEBITOR and i want to create new customers through the transaction WE19.I'm using only the following segments:E1KNA1M,E1KNB1M,E1KNB5M,E1KNBKM.
Basic Type:DEBMAS06
For example we are populating the segment E1KNB5M as follows:
Function :009
Dunning Area :Z0
Dunning Procedure :0003
The customer gets created and we can verify that through the transaction WE02.The table KNB5 is also updated.
However when we go to the transaction FD02 and enter the customer and company code, and click on the Correspondance tab, the dunning procedure field is empty.We can not the details of the table KNB5 on the screen.
Can you please explain me why is this so ?(Points will be rewarded for your useful answers)

If there is any coding done by the developer then please check the coding ..
Also pass E1KNB5M two times..
Function :009
Dunning Procedure :0003
Function :009
Dunning Area :Z0
Dunning Procedure :0003
Regards

Transaction ii views limitaions

Similar Messages

Maybe you are looking for