Transaction IView ignores linebreak (sometimes)

Hi,
I have a transaction IView that calls a program in R3.
The program shows a selection screen with a list of activities.
The strage now is, that it works completly fine in R3, but if I call it from the transaction
IView, the line brakes are sometimes not correct.
There are just a few reports where the Transaction IView doesn't create a linebreak.
In R3 it does!
Has someone an idea what this could be?
Thanks and best regards,
Dennis

Hi Ram,
I now found out that it is a IAC IView for ESS.
So there was no Transaction IView created for that.
But this doesn't help me to solve my problem
Regards,
Dennis

Similar Messages

WebDynpro iView OR Transaction iView

Hi all,
in EP, there are many types of iView. but I want to focusing in one type of iView only.
So, I want to know which one is better,
WebDynpro iView or using Transaction iView.
is there any documentation from SAP?
like Security, Performance, System requirements between those two.
thank you.

Hello Adyt,
Answer might sound typical theoratical
Selection of WebDynpro iView or SAP Transaction iView depends upon the client's need.
WebDynpro Applications are used when we want to create our own reports with specific branding colors,theme, adding buttons, customised selection criteria for generating report.
Transaction iView on the other hand is used when client wants exactly same look and feel of R3 , using Enterprise Portal.
Sometimes SAP transactions can't be converted into application, e.g. SAP internal Mail box (Transaction SWBP).
In such cases no other option than using Transaction iViews !
About requirements, SAP logon pad needed to be installed on the user's terminal to see transaction iView with iView type selected as "SAP Gui" iView.
You can bypass this need by selecting iView type " Web Gui"
For webdynpro you need to have NWDS(Netweaver Development Studio) for application development and java skills as well.
For transaction iView you need to have user mapping between Enterprise Portal and the backend System.
To view WebDynpro iview one does not need user mapping.
Thanks and Regards,
Pradnya

Displaying problem of Transactional iview -- Displaying ~ITS~ above iview

Hi ,
A transactional iview is created and assigned to a workset .
Its working fine.
When it is displaying , I closed the detailed Navigational panel by clicking on the arrow of the iview in content area . so that the iview may also occupy the detailed navigation area . It is displaying ITS above the iview that is below workset tab area .
When i again clicked on the arrow to see the detailed navigation .....it is again show one more time ITS ...as
ITSITS.....
when ever iam closing and opening detailed navigation area ....subsquently ITS message increasing....ITSITSITS.......
Can any one provide me solution for not displaying ITS message....
Version : EP 7.0 , sp12

Hi Sumit,
Check out your Interner Explorer settings, it happens sometime if your secutiry setting are kept high.
Change the Privacy setting to Medium or Low.
Thanks,
Trikanth

EP6 Transaction iView Shortcut... need a little help from my friends

Hi All,
I've noticed an issue regarding Workplace compatibility mode when launching SAPGUI for Windows from a Transaction iView. By default Workplace compatibility is set to "true", however, we need this to be "false".
If I save the shortcut file generated by the portal and open in a text editor I can see this:
[Configuration]
Workplace=true
If I change this on my desktop to "false" and start SAPGUI it works as expected.
Anyone have any ideas how to set this property from the portal?
A fix is described for EP5 in SAP Note # 631555 but I'm finding nothing on EP6.
Help is always greatly appreciated!!
-Adam

Hi Adam,
Request your inputs please.
There is a portal iview having link to connect R/3 system (EP 6 to R/3 4.6C). When the user clicks the link in the iview, before the R/3 system opens, it gives a error saying
<b>"Not all data for SAP GUI shortcut is available. System ID is unknown, Client is unknown, Enter the missing data"</b>If I click OK, a new window opens saying <b>"New SAPGUI shortcut</b>"
In that window it is asking for descrption, SID, SAPGUI parameter, etc...
I checked the SAP system created in the portal and all the parameters including the Application host, port, system aliases, etc are fine and I can open the SAP window from the support desk.
In the iview also I checked all the settings are absolutely fine.
The GUI type is WINGUI and the How to Start SAPGUI for windows I have given SSF only.
Still I am not sure what is missing. If I change the SSF to auto the transaction opens in a new browser.
The issue is this..... EP 6.0, created a System for Dev R/3 (4.6C) and given all the required information for all possible property category like SAP client, SID, system #, port, etc, etc. system type is SAP_R3. User management, Logon method is SAPLOGONTICKETS and user mapping type is "admin, user".
No ITS information is given since we only open the session_manager of R/3 thru the iView.
This opens the R/3 most of the times. But sometimes the user gets the error.
If I use auto instead of SSF the SAP transaction is opening within the iview portal window itself. But earlier it used to open as a typical separate SAP R/3 window.
So I also changed the Drag&relate option to open in a new portal window. Now it is opening in a new window, but unlike the earlier one, the SAP windows is inside a browser window. So the create new session button and all are not active. Moreover the client is cruel enough and very particular to say they want it to open as an individual SAP R/3 window and not inside a browser.
I tried to follow note 631555, but as per that I am not able to find the SAPApplication.Transaction iveiw.
The error does not occur always and in all the systems. Thanks in advance for any help.
Regards,
P. Kumaravel.

Resize the panels in a transaction iView?

Some transactions in the transaction iView have 2 panels: one on the
top and one on the bottom.
Sometimes the one on the bottom cannot be seen unless the user pull
the bottom line up.
Is there any parameter that can be adjusted to let the bottom one
show up by itself? Thanks! Points guaranteed.

Go Content Administration --> Portal Content --> Browse the Transaction iView from the tree --> Double Click on that iview --> Select from Property Category --> Appearance - Size or Select show all --> enter new value to the layout.
Also go thru this link.
http://help.sap.com/saphelp_nw04s/helpdata/en/9e/7d96bb087311d7b84600047582c9f7/frameset.htm
Regards,
Padmanaban

Does each SAP transaction iview create a log on to the backend ECC?

Hi,
If I put multiple SAP transaction iviews in a role, each pointing to a different SAP transaction in the same backend system, does the launch of each iview create a new logon in the backend system when using SAP logon tickets? If so, is it possible to make it only launch a new session if one logon has already been created?
Regards
Cindy

Hello Cindy,
launching of diffrent Transactio Iview form same back end is quite similar as loged in to backend with Proper credentials and opening diffrent transaction's by useing
/oxx(Transaction Name)
Hope it will add to ur knowladge.
Regards.
Soni Vinit

Application Parameters not working in the Transactional iViews

We had created transactional iViews for calling the standard SAP Transaction: IQS8 and IQS9. Here the issue is that we would like to populate the default screens for these 2 transactions with different set of default values.
So, we created variants and sending them as an application parameter to these trasnactional iViews. When we call this iView it is displaying these default values as per the variant which we are sending. But when executing that transaction, it seems those application parameters that we send through the iView are not being used to call that transaction.
How to enforce the transaction to make it use the application parameters as default values, does any one has any idea?
Please let me know if any one of you have a solution for this.

Hi Venkat,
You might want to try the following approach:
1- Create a new transaction code in your SAP system (using transaction SE93 - maintain transaction) which would be a transaction variant of the transaction you want to call with a specific variant
2- Create a 'SAP transaction' iview that points to the new transaction code you created (SAP information <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm">here</a>)
Hope this helps.
Regards,
Joseph

External Facing Portal with access to ITS via Transaction Iview

Hi Experts,
We have a requirement to make the portal available externally for third party vendors to access ECC transactions. We have configured a URL with a reverse proxy to the portal server. Portal loads fine from outside the network, but when launching a transaction I-view, a page cannot be displayed error comes up in IE-8 and Chrome says it cannot access the ECC server.
I've searched the forums and come up with a couple of tips, but that brings on a couple more questions.
It seems you can direct traffic from external URL to portal server:port, but when launching an transaction I-view, it needs to be redirected again to the ECC server:port/sap/bc/gui* (or something like that for SICF GUI service). Question here is, once this redirect happens, technically the ECC box is now available externally vs. only the portal? Is this recommended?
Other option I've found is to try and use IAC I-views instead. Is this really much different than a transaction i-view in how portal handles the opening Iframe? Does it allow backend connectios without rerouting internet traffic to the backend server?
Are they any other options to make this type of setup work for external facing portals using transaction iviews to access ITS?
Thanks for the help!

Hi
Did you able to resolve the issue. We have installed Web Dispatcher through we are able to call the EP but when calling the transaction iViews page not found error pops up, since from EP server request to ECC goes via the URL http://<ecchost.domain>.:8000/sap/bc/gui/sap/its/webgui?sap-client=100.
Thanks
Murthy

How to stop HTTP Security warning message in transactional iview

When I am trying to access ECC through transactional iview then I am getting HTTP security warning message i.e. This page contains both secure and nonsecure items. Do you want to display the nonsecure items?
I think it is because portal is accessable using HTTPS protocol and when we access ECC then it uses HTTP Protocol.
Pl help to resolve.

Hi AshuGrover_in,
First, welcome on SDN!
> I think it is because portal is accessable using HTTPS protocol and when we access ECC then it uses HTTP Protocol.
> Pl help to resolve.
This might very well be the root cause of the issue, and if it is, you know the resolution - make all systems accessible via https.
Anyhow, to examine the exact cause creating this message you could use tools like HttpWatch or something similar and record the client accesses to the server. If you originally have a GET to a https address, the first http request caused by the original request will throw this message.
Theoretically, on client side, you can switch off this message: Search for "switch off http https warning" on google and you will get all possible instructions for the different clients. Anyhow, a clean landscape design with complete https connections is the aim you should have.
Hope it helps
Detlev
PS: On SDN, if something helps, you might reward the answer, check it out.

Open Portal Transaction iView in new window *without* Browser window

Hello,
Currently i am testing to use the single-sign-on functionality of the portal to launch the SAP GUI for Windows.
I created some Transaction iViews and they work perfectly without having to log in.
To use the full GUI size of the SAPGUI in the iView, i configured it to open up in a seperate window. This also works perfectly, but when i let a colleague test the setup, i realized that he has some additional toolbars, which in return decreased the usable space in the browser window for the SAP GUI.
Now my question is:
How can i configure the Transaction iView to open up the given transaction in the SAP GUI, but without the surrounding Browser?
Is this even possible?
I test this because my comany is searching for a solution to use SSO with the SAP GUI. Since we have the portal we test if we could use it to realize this requirement without generating extra costs.

Hi Armin,
for iView (page) you probably set the property 'Launch in New Window' to value Display in Separate Window. To tune up the other otions you have the possibility to set the property Window Features, value should contain toolbar=no. These features will be used when Javascript opens up your window - you can apply any option coomonly documented. IMHO for your demands the best option is fullscreen=yes,toolbar=no - you get really the maximum possible size.
Regards,
Pavol

Can i display My application iview and transaction iview in single page ?

Hi,
I am new in web dynpro and portal. i am doing one approval application through web dynpro. Now i need to attache sap inbox to application. For that some budy suggested me about transaction view. So my questions are as folloes.
1.> How i attached my application to iview ?
2.> How i created Transaction iview ?
3.> Can i attache my application iview with transaction iview if it is possible then how ?
4.> Can i display My application iview and transaction iview in single page ?
Please guide me in this procesure.
Regards,
Gurprit Bhatia

Hi Gurprit,
1.> How i attached my application to iview ?
       You can attach your application to web Dynpro IView, for this login into portal, in the Content Management tab right click on a folder, then New --> IView. Select WD java Application. Select your application and create an Iview.
2.> How i created Transaction iview ?
       Similarly, instead of selecting WD java Application, select iView template, you will get a list of available templates, and in this you will find template for Transaction Iview, in this template define the Tx for which you want to create the template.
3.> Can i attache my application iview with transaction iview if it is possible then how ?
      No, I dont think you can attach your application to transaction Iview. but, you can attach both IViews on single page.
4.> Can i display My application iview and transaction iview in single page ?
      Yes, you can attach both IViews on single page. Again in Content Management tab, crate a PAGE; Then right click on created IViews and select add IView to Page ßß: Delta Link.
Hope this helps.
Regards,
Amit

How to move from one transaction iView to another without losing the info.

Hello expert,
Is there a way to configure multiple transaction iViews in away that when I click on another iViews and want to go back to the old one, then the information is still there? For example, we have a customize transaction that is fetched by running CM07. I want to create two iView (CM07 and the custom transaction) in away that a user will type in the info on the CM07 iView, then click on the custom transaction iView to view the selection from CM07. However all the information should be there when the user going back to CM07. Right now when we are clicking from one iView to another, we have to type in the information again on CM07.
Thank you.

Hi ,
See the thread below .I hope It will resolve your issue
passing values between two transaction iviews?
Koti Reddy
points are welcome if it is helpful!

Error while Creating SAP Transactional iView

Hi
I am trying to create an SAP Transaction iview to connect with SAP CRM system, i selected property WebHTML
but i coule notable to connect to that TCode iview.
For this i created a System with User Credentials that will map to the back end system.
It is connecting to the backend system using BSP Application which are presented in the Business Packages.
Wheather ITS should be configured to get this feature.
If so provide me the proper steps to configure ITS.
Regards

its path should be
its path : /sap/bc/gui/sap/its/
or you can leave it blank.
if this is the first time you are running ITS application (WEBGUI).
then go to transaction se80->utilities->settings->Internet transaction server->pulish
choose onselected site radio button and choose INTERNAL
click ok to come out of it.
now choose internet service from the dropdown and enter SYSTEM and hit enter.
right click on SYSTEM and click publish
like wise publish WEBGUI and SHUFFLER services.
now go to transaction SICF and go to
sap/bc/gui/sap/its/webgui
right click on webgui and click test, which will open the browser and show its screen, if yes.
then you can now check your iview.
Regards
Raja

Error while passing Application Parameter in Transaction iView editor

Dear all
I am trying to pass some application parameters to one of the transaction iViews. Without passing any parameter in 'Application Parameters' field of the iView editor the iView can be previewed/displayed fine. But when I am trying to pass the parameters as follows <Screen_Parameter1>=<ABC>&<...>=<...> the preview is coming up with a Portal runtime error saying that the <Screen_Parameter1> is an invalid terminal property of the root context_
Can anybody help me out with this?
MAQ

In any application parameter field u need pass screen_field
u need to find the screen_field value first .
login to backend ECC server , give u r required Tcode .
click in required field , press f1 -> click on Technical setting icon on top .
in that screen , screen_field is the last field .
copy this screen_field value
place ths screen _field value in application parameter field .
example : rs38-programm=ztest
here re38-programm is the screen field
ztest is it's value .
& this is used for the separator between 2 values

"Error on page" while adding a transaction iview to Role

Hi,
I am getting javascript error "Error on page" when I am trying to add a transaction iview to a Role.
when i click on the error it shows
                 error : Expected ')'
The error is coming only for few iviews while for others it if working fine.
Does anyone know the reason for this error?
Thanks,
Kanchan

/* Formatted on 2012/04/25 14:22 (Formatter Plus v4.8.8) */
CREATE OR REPLACE TRIGGER issue_book_tri
BEFORE INSERT
ON issue_book
FOR EACH ROW
DECLARE
CURSOR a
IS
    SELECT join_date
      FROM member_book;
p_join_date   DATE;
BEGIN
OPEN a;
FETCH a
   INTO p_join_date;
IF p_join_date > :NEW.issue_date
THEN
    raise_application_error (-20322, 'You may Issue book only after joining');
ELSIF 1 = 1 -- uuuuuu miss the condition here
THEN
    :NEW.return_date := :NEW.issue_date + 15;
END IF;
CLOSE a;
END;

Transaction IView ignores linebreak (sometimes)

Similar Messages

Maybe you are looking for