Transaction iView - NOHEADEROKCODE=1

Hi ,
I want to hide the command box by setting the parameter NOHEADEROKCODE=1 . I believe this can be set in the ITS service parameters. Since this will change the setting for all the iViews rendered via SAP GUI for HTML , I wanted to know if there is any way I can pass this from the portal iView as a parameter.
Regards,
Muinul

Hi Hussain,
Please check the below post.
Re: Hide the command box in sap gui
Thanks,
Ramakrishna

Similar Messages

Hide Command box in transactional iview

hi,
I have imported the <b>Best practices for EP</b> package. In the package we have webgui transactional iviews. my concern is when i run the iview i can see the command box and from that i can run other transactions. I want to hide the command box so that user can run only that particular transaction.
using webgui (ITS) this can be done by setting the service parameter ~NOHEADEROKCODE = 1. But when we import the business package where do we need to set this service parameter.
Is there a way to do it?
Thanks in advance,
Gopi

Gopi,
Are you using V2.60.
You are best to log an OSS message under component
SV-SMB-AIO-BP-EP.
James

Transaction iView - SAP GUI for HTML - Problem while hiding menu bar

Hello all,
I am trying to hide the OKcode field and the Menu button in a Transaction iView of type SAP GUI for HTML. I am following the SAP note 1010519. However, nothing seems to change, even after adding the parameter ~webgui_simple_toolbar = 0 or any other value.
I added the parameter to the service: default_host ->sap -> bc -> gui ->sap -> its -><b>webgui</b>
After going through few posts relating to this issue, I figured out that passing application parameters would not work. Also, using IAC is not an option for me.
Can someone help? How can I hide the OKCode field and Menu bar?
Thanks and Regards,
Reena

Hello Reena,
Maintaining the parameter
~WEBTRANSACTIONTYPE EWT
will solve your problem. You can also create an IAC iview. Here is a document for the same.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/_d-f/Displaying%20SAP%20Transaction%20as%20Internet%20Application%20in%20Portal.pdf">How to diplay a transaction as IAC iview</a>
Also remove the parameter ~noheaderOkCode.
Hope that helps.
Regards
Deb

Property "OK Code Field" for SAP Transaction iViews

Hi there,
I created an SAP Transaction iView which is accessing an ECC system using SAP GUI for Html. In the properties of the iView I found the property "OK Code Field" - has anybody a idea how this field is used?
I hope that there is a possibility to hide the command field with this parameter. Haven't found a possibility to hide that field although I saw that obviously I'm not the first to deal with this issue...
Any help is rewarded.
Regards
Gesine

Hi,
To disable OK Code field,
- Go to SICF TCODE
- Expand to /default_host/sap/bc/gui/sap/its/webgui service
- double click to enter properties
- On Service Data TAB, click Settings Button
- You have to siwtch to change mode in order to change
- there add the following parameter
Parameter: ~NOHEADEROKCODE
Value: 1

Restrict the Users from doing Transactions from transactional Iview.

Dear all,
We are having some transactional iviews in EP7.0 and ECC 6.0. We want to restrict the enduser from doing transactions by entering the transaction codes.
1.Can we remove the command line
2.Can we restrict the user
We are using transactional iviews using connectors.
Reply asap
Thanks
Ravi.S

1) There is an its parameter you add in transaction SICF in the webgui service. It is something like ~noheaderokcode.
See here:
http://help.sap.com/saphelp_webas620/helpdata/en/96/c09788c65b11d480c100c04f99fbf0/content.htm
2) Backend authorisations define which transaction codes you have access to.
Paul

How to hide command fied using transaction iview

Hi All,
Is there any way to hide command box (transactional field) in Portal using transactional iview ?
I have searched in sdn forum, it is possible via IAC iview using application parameters ~headerOKcode = 1.
Since our ITS is not configured properly and it is continously giving Browser errors (Object expected, 'wgu_global_eventhandler' is null or not an object).
So.........I can;t go ahead with IAC Iview.
I suspect.....anyone has gone through this problem and experts has a solution with transactional iviews to hide those command boxes.
Appreciate your inputs in this regards.
Thanks,
Anil Kumar

Try this in 'Application Parameters' field '&~NOHEADEROKCODE=1'

Toolbar on Transactional iView

Hi All,
I am creating a transactional iView on toolbar getting many buttons. I dont want all buttons, just one button to be there?
I tried applying ~webgui_simple_toolbar parameter for my webgui service at the backend with many available option 1,2, 4,6,16,32,64,128
nothing fits...
Can anyone help me.
Is there any other way apart from this parameter for setting the action button for transactional iView.. Transactional Code is SU3 .. basic User settings.. user want to save by themselves... hence I want only Save button.. but default it comes with many buttons.. I dont want all them expect Save.
Please help me.
Regards
Pankhuri

you have to create a IAC ivew for the same and in it do the following validations.
But all the buttons will disappear in this case.
For this IAC ivew there is a corresponding SE80 internet service created, open it from sicf now
Goto sicf ->sap->bc->gui->sap->its->
open Webgui application
clcik on GUI configuration and give the following paramaetrs. the buttons and the command box will disappear.
~NOHEADEROKCODE = 1
~WEBTRANSACTIONTYPE = EWT
also
open the r/3 trnasaction for which you are creating a IAC ivew with se93.
under classification
select the ESAY WEB TRANSACTION radio button.
dats it the buttons will disapper.
Cheers!!
SJ.
Edited by: SJ on Jul 8, 2008 12:39 PM

Does each SAP transaction iview create a log on to the backend ECC?

Hi,
If I put multiple SAP transaction iviews in a role, each pointing to a different SAP transaction in the same backend system, does the launch of each iview create a new logon in the backend system when using SAP logon tickets? If so, is it possible to make it only launch a new session if one logon has already been created?
Regards
Cindy

Hello Cindy,
launching of diffrent Transactio Iview form same back end is quite similar as loged in to backend with Proper credentials and opening diffrent transaction's by useing
/oxx(Transaction Name)
Hope it will add to ur knowladge.
Regards.
Soni Vinit

Application Parameters not working in the Transactional iViews

We had created transactional iViews for calling the standard SAP Transaction: IQS8 and IQS9. Here the issue is that we would like to populate the default screens for these 2 transactions with different set of default values.
So, we created variants and sending them as an application parameter to these trasnactional iViews. When we call this iView it is displaying these default values as per the variant which we are sending. But when executing that transaction, it seems those application parameters that we send through the iView are not being used to call that transaction.
How to enforce the transaction to make it use the application parameters as default values, does any one has any idea?
Please let me know if any one of you have a solution for this.

Hi Venkat,
You might want to try the following approach:
1- Create a new transaction code in your SAP system (using transaction SE93 - maintain transaction) which would be a transaction variant of the transaction you want to call with a specific variant
2- Create a 'SAP transaction' iview that points to the new transaction code you created (SAP information <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm">here</a>)
Hope this helps.
Regards,
Joseph

External Facing Portal with access to ITS via Transaction Iview

Hi Experts,
We have a requirement to make the portal available externally for third party vendors to access ECC transactions. We have configured a URL with a reverse proxy to the portal server. Portal loads fine from outside the network, but when launching a transaction I-view, a page cannot be displayed error comes up in IE-8 and Chrome says it cannot access the ECC server.
I've searched the forums and come up with a couple of tips, but that brings on a couple more questions.
It seems you can direct traffic from external URL to portal server:port, but when launching an transaction I-view, it needs to be redirected again to the ECC server:port/sap/bc/gui* (or something like that for SICF GUI service). Question here is, once this redirect happens, technically the ECC box is now available externally vs. only the portal? Is this recommended?
Other option I've found is to try and use IAC I-views instead. Is this really much different than a transaction i-view in how portal handles the opening Iframe? Does it allow backend connectios without rerouting internet traffic to the backend server?
Are they any other options to make this type of setup work for external facing portals using transaction iviews to access ITS?
Thanks for the help!

Hi
Did you able to resolve the issue. We have installed Web Dispatcher through we are able to call the EP but when calling the transaction iViews page not found error pops up, since from EP server request to ECC goes via the URL http://<ecchost.domain>.:8000/sap/bc/gui/sap/its/webgui?sap-client=100.
Thanks
Murthy

How to stop HTTP Security warning message in transactional iview

When I am trying to access ECC through transactional iview then I am getting HTTP security warning message i.e. This page contains both secure and nonsecure items. Do you want to display the nonsecure items?
I think it is because portal is accessable using HTTPS protocol and when we access ECC then it uses HTTP Protocol.
Pl help to resolve.

Hi AshuGrover_in,
First, welcome on SDN!
> I think it is because portal is accessable using HTTPS protocol and when we access ECC then it uses HTTP Protocol.
> Pl help to resolve.
This might very well be the root cause of the issue, and if it is, you know the resolution - make all systems accessible via https.
Anyhow, to examine the exact cause creating this message you could use tools like HttpWatch or something similar and record the client accesses to the server. If you originally have a GET to a https address, the first http request caused by the original request will throw this message.
Theoretically, on client side, you can switch off this message: Search for "switch off http https warning" on google and you will get all possible instructions for the different clients. Anyhow, a clean landscape design with complete https connections is the aim you should have.
Hope it helps
Detlev
PS: On SDN, if something helps, you might reward the answer, check it out.

Open Portal Transaction iView in new window *without* Browser window

Hello,
Currently i am testing to use the single-sign-on functionality of the portal to launch the SAP GUI for Windows.
I created some Transaction iViews and they work perfectly without having to log in.
To use the full GUI size of the SAPGUI in the iView, i configured it to open up in a seperate window. This also works perfectly, but when i let a colleague test the setup, i realized that he has some additional toolbars, which in return decreased the usable space in the browser window for the SAP GUI.
Now my question is:
How can i configure the Transaction iView to open up the given transaction in the SAP GUI, but without the surrounding Browser?
Is this even possible?
I test this because my comany is searching for a solution to use SSO with the SAP GUI. Since we have the portal we test if we could use it to realize this requirement without generating extra costs.

Hi Armin,
for iView (page) you probably set the property 'Launch in New Window' to value Display in Separate Window. To tune up the other otions you have the possibility to set the property Window Features, value should contain toolbar=no. These features will be used when Javascript opens up your window - you can apply any option coomonly documented. IMHO for your demands the best option is fullscreen=yes,toolbar=no - you get really the maximum possible size.
Regards,
Pavol

Can i display My application iview and transaction iview in single page ?

Hi,
I am new in web dynpro and portal. i am doing one approval application through web dynpro. Now i need to attache sap inbox to application. For that some budy suggested me about transaction view. So my questions are as folloes.
1.> How i attached my application to iview ?
2.> How i created Transaction iview ?
3.> Can i attache my application iview with transaction iview if it is possible then how ?
4.> Can i display My application iview and transaction iview in single page ?
Please guide me in this procesure.
Regards,
Gurprit Bhatia

Hi Gurprit,
1.> How i attached my application to iview ?
       You can attach your application to web Dynpro IView, for this login into portal, in the Content Management tab right click on a folder, then New --> IView. Select WD java Application. Select your application and create an Iview.
2.> How i created Transaction iview ?
       Similarly, instead of selecting WD java Application, select iView template, you will get a list of available templates, and in this you will find template for Transaction Iview, in this template define the Tx for which you want to create the template.
3.> Can i attache my application iview with transaction iview if it is possible then how ?
      No, I dont think you can attach your application to transaction Iview. but, you can attach both IViews on single page.
4.> Can i display My application iview and transaction iview in single page ?
      Yes, you can attach both IViews on single page. Again in Content Management tab, crate a PAGE; Then right click on created IViews and select add IView to Page ßß: Delta Link.
Hope this helps.
Regards,
Amit

How to move from one transaction iView to another without losing the info.

Hello expert,
Is there a way to configure multiple transaction iViews in away that when I click on another iViews and want to go back to the old one, then the information is still there? For example, we have a customize transaction that is fetched by running CM07. I want to create two iView (CM07 and the custom transaction) in away that a user will type in the info on the CM07 iView, then click on the custom transaction iView to view the selection from CM07. However all the information should be there when the user going back to CM07. Right now when we are clicking from one iView to another, we have to type in the information again on CM07.
Thank you.

Hi ,
See the thread below .I hope It will resolve your issue
passing values between two transaction iviews?
Koti Reddy
points are welcome if it is helpful!

Error while Creating SAP Transactional iView

Hi
I am trying to create an SAP Transaction iview to connect with SAP CRM system, i selected property WebHTML
but i coule notable to connect to that TCode iview.
For this i created a System with User Credentials that will map to the back end system.
It is connecting to the backend system using BSP Application which are presented in the Business Packages.
Wheather ITS should be configured to get this feature.
If so provide me the proper steps to configure ITS.
Regards

its path should be
its path : /sap/bc/gui/sap/its/
or you can leave it blank.
if this is the first time you are running ITS application (WEBGUI).
then go to transaction se80->utilities->settings->Internet transaction server->pulish
choose onselected site radio button and choose INTERNAL
click ok to come out of it.
now choose internet service from the dropdown and enter SYSTEM and hit enter.
right click on SYSTEM and click publish
like wise publish WEBGUI and SHUFFLER services.
now go to transaction SICF and go to
sap/bc/gui/sap/its/webgui
right click on webgui and click test, which will open the browser and show its screen, if yes.
then you can now check your iview.
Regards
Raja

Transaction iView - NOHEADEROKCODE=1

Similar Messages

Maybe you are looking for