Transaction Iview - Parameters

Hi,
I have a transaction iview wherein i want to pass the parameters.
I have checked that static parameters are getting passed.
But my requirement is of passing portal userid to the transaction iview.
How is it possible.
Regards,
Priya

The portal userid is normally the same as the username inside the ABAP system. This can be retrieved by looking at sy-uname inside the ABAP transaction.
If you want to pass user specific parameters from the portal, then you should look at the generic application launcher. It uses a specially formatted URL to start a web site and can pass user information.

Similar Messages

  • Application Parameters not working in the Transactional iViews

    We had created transactional iViews for calling the standard SAP Transaction: IQS8 and IQS9. Here the issue is that we would like to populate the default screens for these 2 transactions with different set of default values.
    So, we created variants and sending them as an application parameter to these trasnactional iViews. When we call this iView it is displaying these default values as per the variant which we are sending. But when executing that transaction, it seems those application parameters that we send through the iView are not being used to call that transaction.
    How to enforce the transaction to make it use the application parameters as default values, does any one has any idea?
    Please let me know if any one of you have a solution for this.

    Hi Venkat,
    You might want to try the following approach:
    1- Create a new transaction code in your SAP system (using transaction SE93 - maintain transaction) which would be a transaction variant of the transaction you want to call with a specific variant
    2- Create a 'SAP transaction' iview that points to the new transaction code you created (SAP information <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm">here</a>)
    Hope this helps.
    Regards,
    Joseph

  • ABAP WebDynpro app calling Transaction iview with Dynamic Parameters..?

    Good day!
    I need to code a call to a transaction (with dynamic parameters) from an Abap WD application.  It appears that to achieve this, the app needs to call a new portal transaction iview, passing the parameters in the call..? 
    This should ideally be via a Sapgui for Windows, but Html also an option (does it matter with regards to the method used?). 
    Kindly assist with advise/instructions, idealy with sample code extract to illustrate (new to Abap WD)...
    Kind regards
    j

    Hi
    this will help you doing so
    http://help.sap.com/saphelp_nw04s/helpdata/en/18/f96f4132f15c58e10000000a1550b0/frameset.htm
    Use BUSINESS_PARAMETERS to pass the data
    Abhi

  • Passing parameters to SAP Transaction iView

    Hi,
    We have a SAP Transaction iView (for ERP transaction SWK3) which works fine in our 7.0 portal using the following Application Parameters value:
    P_CATID=BO&P_TYPEID=BUS2089&P_INSTID=<Request.P_INSTID>
    At runtime, the parameters set with constant values are passed (i.e. P_CATID and P_TYPEID) successfully from the iView, while the url invoking the iView contains parameter P_INSTID which is dynamic (called from another iView).
    For example, this may look as follows:
    ?P_INSTID=000614330000120800
    Since we have upgraded to portal 7.4, the NWA log shows the following error for this process suggesting this is not a valid method of passing parameters any more.
    om.sapportals.portal.appintegrator.ApplicationIntegratorException: Unable to process template 'P_CATID=BO&P_TYPEID=BUS2089&P_INSTID=<Request.P_INSTID>', because 'P_INSTID' is an invalid terminal property of context 'Request.'.
    Please can you advise how to overcome this error for the dynamic parameter.
    Thanks,
    Alan

    Hi Alexander,
    Apologies for the late reply, I've been on an extended period of annual leave.
    I've checked back on my notes and we retained the Application Parameters iView setting exactly as I state above but I had to ask our Java developer to explicitly add the static parameters P_CATID and P_TYPEID to the dynamic URL call to launch the iView.
    So for example, an example URL would be:
    ... ivu.view_trip?sap-config-mode=true?P_CATID=BO&P_TYPEID=BUS2089&P_INSTID=000614330000120800
    This cured the problem though I'm unsure whether it is still essential that the static parameters need to exist in the iView configuration. We had many issues at that moment in time I was just pleased to find a solution.
    Good luck!
    Alan

  • Transaction iView - pass parameters to non-default tab

    Hi Experts,
    I have a requirement to call transaction iView from  Webdynpro ABAP application by passing some default values.
    I am able to call the iView and also able to pass parameters. My requirement is to pass values to the tab in iView which is not the default tab when I execute the TCode.
    Is this possible using absolute navigation...??
    If yes please let me know how can that be achieved...
    Thanks in Advance....!!!!
    Regards,
    Shruti Shah

    Hi,
    Do you  already know a  way to reach this transaction to a desired tab with out using webdynpro ?. Is it possible at all in any way to start this transaction and position to a particular TAB.
    If you do not know that then i am afraid that no one could help you out in forum.
    Good luck

  • Call a Transaction iView with parameters

    Hello,
    can anyone help me with the following problem:
    I'll just tried to call the transaction RECN with a transaction iView. When I test the iView it works but not with any parameters in the URL.
    I'll tried the parameters fix in the iView properties but without any result.
    Can someone tell me the correct syntax? I'll tried everything I can find in the SAP help and here in the forum.
    Have someone a how to for calling transaction iView with dynamical parameters?
    Thanks for help!
    Best regards
    Martin

    Martin,
    Have you had a look at these yet?
    http://wiki.sdn.sap.com/wiki/display/EP/StartanSAPtransactionfromaURL
    How to launch SAP transaction & pass parameters via URL
    Cheers!
    Sandeep Tudumu

  • PR05 Transaction Iview with parameters

    Hi,
    I have one abap webdynpro appn in which after a button is clicked, it has to go to PR05 transaction with necessary parameters like employee number, trip number.
    So i have used the NAVIGATION_ABSOLUTE method in dynpro, and in the business_parameters i have passed the values.
    But the iview is opened and still in the same first screen of PR05 with out passing the parameters with the pop up message "Choose a valid trip".
    In my case, the business parameter is not working fine, as i can see that it still shows the first screen and also the employee number is the login user employee number and not the one which i gave.
    In the iview, i have already given the "Parameters forwarded to Transaction" = PER,TNO.
    And also "OK Code Field" = 'MOD', "Process First screen" = Yes.
    Any other thing need to be given?
    Thanks.

    Martin,
    Have you had a look at these yet?
    http://wiki.sdn.sap.com/wiki/display/EP/StartanSAPtransactionfromaURL
    How to launch SAP transaction & pass parameters via URL
    Cheers!
    Sandeep Tudumu

  • Starting R/3 Transaction iView with dynamic parameters

    Hi,
    I looked around here for a while searching an answer but couldn't find one. Excuse me if I overlooked something about this rather simple question (I guess).
    I have a BW query iView which displays a list of items, lets say order numbers. I would like to click on this number and open a specific R/3 transaction iView with the given order number processed.
    I succesfully implement this iView with the property "application parameters" in the form "XYZ=0012345" and it works. But of course, the order number should be dynamically set. I tried to call the iview via the "NavigationTarget=ROLES:/.../iViewID?XYZ=0012345" etc. which starts the transaction, but the parameter is not recognized.
    Thanks for any useful hints.
    Uwe

    Hi Uwe,
    perhaps the Guide:
    <a href="http://service.sap.com/~form/sapnet?_SCENARIO=01100035870000000112&_SHORTKEY=00200797470000065927&_OBJECT=011000358700000384062005E&">How To Enable Portal Navigation From BW to PCUI Applications</a>
    Gives you some hints.
    Regards
    Gregor

  • Navigate to Transactional iVIEW by passing parameters & UWL

    Hi Experts,
    I have 2 queries here,
    1>>
    I understand  that to navigate to a transaction from webdynpro a transactional iview has to be used. In my case i have to navigate to ME51 from the component and display the transaction with the details of a paticular purchase requisition. So my question is can i pass the PR no. to the iview and display the right screen of the transaction.
    2>>
    On click of an other button i need to navigate to the Universal Work List(UWL) of that User, does this require us to embed the UWL in an iview as well?
    Thanks In Advance,
    Chaitanya.

    Hi,
    In Portal, when you are creating a Trans. Iview check the properties. I guess there should be parameters for that.
    Regards,
    Lekha.

  • Passing Parameters Transaction iView

    Hi!
    I have created a SAP transaction iView that calls the transaction MM03. I know that we can pass application parameters by defining them in the iView properties. On the SAP help website, its given in the syntax <Screen_field1>=<parameter1> and so on for all the parameters.
    How do I find out the name of the screen field? For example, I want to pass the material number VPP27. So it should be, <Screen_field1>=VPP27. But how do know what the screen field is called? I tried giving in Material, but it doesnt work..
    Anyone know a way out?
    Sameer

    You can position the cursor at the field within the transaction in R3, then use the F1 key (for help), followed by F9 (for technical help).  You should see a pop-up showing the screen field names for the present field that the cursor is on.

  • Passing Parameters programtically to Transaction iView

    dear friends,
    i have created transaction iview and execute fine in preview or anywhere.
    e.g. mmbe transaction
    Here it goes first directly to selection screen, and after providing the required values, it goes to exact transaction page.
    i can do skipping the First page in iView settings,
    But the parameters i am sending like
    MARAV-MATNR=REL00001I MARCV_WERKS=1810 is not taking
    i tried all sort of combination in parameter box,
    but no result yet,
    can anybody help on this?
    I want to call this iView from another iView by providing my own parameters.
    can any body help me on this with code.
    thanx in advance
    regards
    kantha

    Hi kantha,
    if you want to pass diff variable values, then you need to pass the variables separated by '&'. More over you are passing values to a wrong screen field names. Usually this happens when screen field name you are passing is wrong. The value appears only when Module Pool Screen field exactly matches with what you are passing.
    Try passing Application Parameters:
    MS_MATNR-LOW=REL00001&MS_WERKS-LOW=1810 (SAP 4.7 Enterprise)
    Material field is MS_MATNR-LOW and Plant Field is MS_WERKS-LOW.
    SAP Transaction Iview is an extension of SAP Application Integrator. To know more about how to pass values
    http://help.sap.com/bp_epv260/documentation/How-to_Guides/25_HowToUseAppIntegrator_en.pdf
    Hope this helps,
    Thanks,
    Praveen
    PS. Dont foget to allot points if useful/solved

  • Passing parameters to IAC Transaction iView

    Hi guys,
    Anybody knows how I can carry out this task? I have a page that has some value that I would like to pass to an IAC Transaction iView via the URL.
    Thanks!

    Check this out:
    http://help.sap.com/saphelp_nw04/helpdata/en/5a/6898dddb7afd44b07ca4e3bb15f676/frameset.htm
    All u need to do is append the screenfield values and pass it to the URL.
    Something like this:
    Eg:
    <script>
    Screen_field_Value = 'XYZ';
    dynP = "?DynamicParameter=Screen_field1" +Screen_field_Value + ";";
    </script>
    <hbj:link id="l1" text="IAC - Link1">
    <% l1.setOnClientClick("EPCM.doNavigate('ROLES://portal_content/com.sap....../myIACIvu' + dynP ,1);void(0);"); %>
    </hbj:link>
    Plz don forget points, if it helped.
    Regards,
    P.

  • Error while passing Application Parameter in Transaction iView editor

    Dear all
    I am trying to pass some application parameters to one of the transaction iViews. Without passing any parameter in 'Application Parameters' field of the iView editor the iView can be previewed/displayed fine. But when I am trying to pass the parameters as follows <Screen_Parameter1>=<ABC>&<...>=<...> the preview is coming up with a Portal runtime error saying that the <Screen_Parameter1> is an invalid terminal property of the root context_
    Can anybody help me out with this?
    MAQ

    In any application parameter field u need pass screen_field
    u need to find the screen_field value first .
    login to backend ECC server , give u r required Tcode .
    click in  required field , press f1 -> click on Technical setting icon on top .
    in that screen , screen_field is the last field .
    copy  this screen_field value
    place ths screen _field value in application parameter field .
    example : rs38-programm=ztest
    here re38-programm is the screen field
      ztest is it's value .
    & this is used for the separator between 2 values

  • Error in transaction iview

    Hi All,
    I have created a transaction iview for transaction CJ2B. When I click preview button, first screen of transaction opens properly; but when I enter input parameters and try to go to next screen by pressing 'enter' it displays error:
    <b>Initializing of graphics for HTML is not supported in SAP GUI</b>
    Hence I am not able to navigate to second screen.
    I have set SAP Gui type value 'SAP GUI For HTML'.
    Please help.

    Hi
    Go to the System Administration>Support>SAP Application
    In the Test and Configuration Tools
    Select the SAP Transcation
    In that Provide the System Name , Gui Type and try with the both windows and Html gui
    Check whether you are getting the same problem or not
    Hope this helps,
    Regards,
    Arun

  • How to pass the User Group for a SQ00 Transaction iView

    Hello,
    To start off, I am relatively new to SAP technology in general.  I may be missing something obvious.
    I am trying to create an SAP Transaction iView in our EP Portal that will call the SQ00 transaction (start query) and run a particular query against our R/3 backend.  I set the Transaction Code to: SQ00, the application parameters to: RS38R-QNUM=<my query> and the OK Code to: SHOW and the System to the System alias for our R/3 system.
    My problem is that the query that I need to run is not in the default User Group that comes up by default.  So I get a screen that has the query field (RS38R-QNUM) correctly populated but the error that the query has not been created.  From that screen I can navigate to the correct User Group and then run query.  There does not seem to be a User Group field on the screen, you change it by accessing a different menu, so I do not know how to call the screen for a particular User Group.
    Is their an application parameter that I can initially pass to set the User Group?
    Thank you.

    And my lecturer is suck, every lectures she just read
    the slices and never explains why and how they are.
    (If ask her, she talks and talks rubbish and
    eventually I get nothing)Maybe you should drop the class and complain to the administration.

Maybe you are looking for