Transaction iView - reload of content

Hi Experts.
A transaction iView (SAP GUI for HTML) displays a SAP transaction in the portal. But whenever I navigate to another portal content and then back to the SAP transaction iView the procedure starts again (connecting to R/3 and starting the SAP transaction).
Is it possible to tell the portal (iView, workset, ...) not always to reload the whole stuff, but only show me the last result?
Regards, Mathias

Hi Peter,
if you question is to change the content in the logon page..
Try this link...
http://help.sap.com/saphelp_nw04/helpdata/en/62/601e1eebf54ca6a97e2873c8c63517/frameset.htm
Regards,
venkat.
[Reward points if useful]

Similar Messages

Field's content is not fully visible in Sap Transaction iview

Hello Friends,
                I have deployed a Sap Transaction iview on my portal. I am facing a issue. When i do F4 help on a field, the content of columns is not fully visible in the opened up popup window.
    Is there any way to adjust the colum width, so that it accomodates the whole content and doesn't truncate it ?
    please help !
Regards,
Vidit

Hi Vidit,
Try to check your Transaction iview directly from the browser / through services not through the EP. If the iview is not working fine then thre is a problem in the code otherwise it has to work
Check your code and try to redeploy
Regards,
sreedhar G

EP content transport : Transaction Iviews not coming up....All others ok

Dear all
We have made a transport package to move content from dev to QA. All the iviews, roles, worksets are coming up fine in the QA server but for some strange reason, transaction Iviews are not coming up and an "yellow icon" indicating "link not available" is coming up .
while transporting no errors were thrown and it showed zero errors.
Kindly let me know if any one encountered such a error during transport.
Regards
Jayesh

The related template on which the transaction iview was based was not present. Once corrected everything went fine
Regards
Jayesh

Auto refresh/reload of content in km navigation iview?

We are using loads of km navigation iviews to show content from km folders or taxonomy folders. Some of these are placed on the portals front page (company news for example). Since many of our employees log into our portal in the morning and then keeps it in the background during the day without refreshing the page, they miss out on new items in these iviews. This could also apply to display screens in our factories.
Does anyone have a solution as to how make these iviews refresh at certain intervals?
Henning

Hi Henning,
have you fixed this issue?
Could you please share with me the details?
Thank you.
Gio

Can i display My application iview and transaction iview in single page ?

Hi,
I am new in web dynpro and portal. i am doing one approval application through web dynpro. Now i need to attache sap inbox to application. For that some budy suggested me about transaction view. So my questions are as folloes.
1.> How i attached my application to iview ?
2.> How i created Transaction iview ?
3.> Can i attache my application iview with transaction iview if it is possible then how ?
4.> Can i display My application iview and transaction iview in single page ?
Please guide me in this procesure.
Regards,
Gurprit Bhatia

Hi Gurprit,
1.> How i attached my application to iview ?
       You can attach your application to web Dynpro IView, for this login into portal, in the Content Management tab right click on a folder, then New --> IView. Select WD java Application. Select your application and create an Iview.
2.> How i created Transaction iview ?
       Similarly, instead of selecting WD java Application, select iView template, you will get a list of available templates, and in this you will find template for Transaction Iview, in this template define the Tx for which you want to create the template.
3.> Can i attache my application iview with transaction iview if it is possible then how ?
      No, I dont think you can attach your application to transaction Iview. but, you can attach both IViews on single page.
4.> Can i display My application iview and transaction iview in single page ?
      Yes, you can attach both IViews on single page. Again in Content Management tab, crate a PAGE; Then right click on created IViews and select add IView to Page ßß: Delta Link.
Hope this helps.
Regards,
Amit

ECC Transaction iView Error on Browser Resize

Hello.
I have created hundreds of SAP ECC Transaction iViews in the portal. After doing some testing, I realized that any time a browser window is modified when an ECC transaction iView is within display, the resize causes the transaction iView to refresh. Upon refreshing, the transaction throws error or works as if the user submitted the transaction on the backend, instead of just remaining in the same state.
For instance, if you have an SAP Transaction iView to an ECC system for tcode QM01 and it is accessible through the Detailed Navigation, this iView can be opened either in its own browser window, or within the desktop inner page. If configured to pop-up in a new browser window and you click or drag to resize the browser window, the transaction refreshes, and throws the error: "Fill in all required entry fields." This is the same error that is thrown in ECC when a user submits the transaction with no data. Similarly, if you have the iView configured to open within the portal framework and you click on the transaction it opens in the desktop inner page. If you maximize/restore down the browser window displaying the portal, the transaction refreshes within the desktop inner page and throws this same error, like it was submitted.
It happens with every ECC transaction iView that I have created, but does not happen with SRM IAC iViews, Web DynPro iViews, or SUS functionality iViews. This leads me to believe it is a problem in ITS. Does anyone know what is going wrong, or how to fix this?
Thanks for any help!
Alexa

Hi,
Super admin has permission for end user for all the iViews. So he will be able to view the iView. As mentioned, please check if the end user permission is given for the end user to access the iView. Also check if the permission is given for that particular system. To check permissions, go to System Administration -> Permissions -> Portal permissions -> Portal Content. Check for iView and system that you have created.
Regards,
Harinin S

How to Call Transaction iView that calls RRMXP from Web Dynpro for ABAP

Dear Experts,,
I'm developing an application in Web Dynpro for ABAP wherein I'm supposed to give a link that should open an SAP Transaction iView that calls tcode = 'RRMXP' and I pass the application parameter as QUERY/WBID = <BI query/Workbook ID>.
I tried calling com.sap.portal.appintegrator.sap.bwc.Transaction iView, but it asks for system/application and GUI type parameters. How to pass through the URL?
Any help would be highly appreciated
Regds,
Srini

Hi Wolfgang,,
My problem was that I was supposed to call the BeX Web Analyser ( a BI excel based tool - client installation) on click of a button in my WD-ABAP application. I solved it as follows :
In the portal pcd, I cam across a folder content provided by SAP. Here, you'll find standard template iViews that can be used to call applications ( for which you make iViews). I had to call an SAP TCode : RRMXP so as to call a BI Workbook/Query.
So, I called the standard iView template for sap_transaction_iView as follows :
irj/servlet/prt/portal/prtmode/preview/prtroot/'
           'pcd!3aportal_content!2fcom.sap.pct!2ftemplates'
           '!2fiviews!2fcom.sap.portal.sap_transaction_iview?'
           'sap-config-mode=true&System=BWR3System&TCode=RRMXP'
           '&GuiType=WinGui&OkCode=y&ApplicationParameter=' <appnm> into url.
      l_popup =
         l_window_manager->create_external_window( url = url
                                      has_menubar = ' '
                                     has_statusbar = ' '
                                      has_toolbar = ' '
                                      has_location = ' ').
      l_popup->open( ).
And , it worked.
Any more help pls feel free to revert.
Regds,
Srini

Transaction iView issue: Table Can't Support multi-cell copy pase

Hey guys:
I have a big problem. The transaction iview's content is a ABAP application, and it cannot support mulit-cell copy-pase when user try to pase their data from Excel. It only allow single cell copy-pase each time, and that means user needs to enter data cell by cell. However, the ABAP application works just fine on SAP GUI.
Anyone can help me figure this out?
I hope this is configuration problem but WebGUI doesn't support this operation.
Looking forward your help! Please leave your suggestion. Thanks!

Sorry it has taken so long for people to respond but this is a lot of data and it took time but basically it's a software issue what's happening is your service provider is making every attempt to contact your phone and your phone is basically not giving up any of the data like your udid or unique identifier. Their is no exact fix for this because I have only ever seen this issue 3 times and what it is best to do is connect to your computer and restore and set it up as a new phone then restore from backed up data. This is the only advice I can offer as this issue is so rare no one has one exact answer for it

Transaction iView issue: Table cannot support multi-cell copy and pase

Hey guys:
I have a big problem. The transaction iview's content is a ABAP application, and it cannot support mulit-cell copy-pase when user try to pase their data from Excel. It only allow single cell copy-pase each time, and that means user needs to enter data cell by cell. However, the ABAP application works just fine on SAP GUI.
Anyone can help me figure this out?
I hope this is configuration problem but WebGUI doesn't support this operation.
Looking forward your help! Please leave your suggestion. Thanks!

Hi,
How are you creating the AIP for 11.0.03. You should create AIP for 11.0 and then patch the AIP with 11.0.03 update to create AIP for 11.0.03
Do not include any other patches in between.
e.g
1. Once you have downloaded the 11.0.03 EXE and extracted to some folder, it will contain the following files, lets say "C:\extract" contains these files
ABCPY.INI
AcroRead.msi
AdbeRdrUpd11003.msp
Data1.cab
setup.exe
Setup.ini
2. Now, create AIP for 11.0.0 using the following command, Where C:\Test123 is the location where 11.0.0 AIP is getting created, so first navigate to the extracted location and then create AIP for 11.0.0
>cd C:\extract
>msiexec /a AcroRead.msi TARGETDIR="C:\Test123"
3. Now, create AIP for 11.0.03, for this first navigate to C:\Test123
>cd C:\Test123
>msiexec /a AcroRead.msi /p C:\extract\AdbeRdrUpd11003.msp TARGETDIR="C:\Test123"
Now, C:\Test123 contains 11.0.03 Reader AIP
4. Create your Transforms (if needed)
5. Apply the patch with this command, after navigating to C:\Test123
>msiexec /i AcroRead.msi REINSTALL=ALL REINSTALLMODE=vomus
This way you can install the 11.0.03 AIP on any existing AIP installations of Reader (It does not need to be a clean OS)
The above method is an underlyting GPO methodology when you upgrade package in Group Policy Editor and link the object to any OU
For more information, this may help,
http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/gpo.html

Transaction iview to connect R3, sapgui is mandatory to be installed?

hi
to use transaction iview in EP to connect R3, sapgui is mandatory to be installed on the cliend side?
br
hua

Hi hua,
The 3 options for a Transaction iView GUI are described here:
http://help.sap.com/saphelp_nw04/helpdata/en/7a/d2c23b6fc85106e10000000a114084/content.htm
Hope that helps,
Yoav.

Printing SAP Reports (Transactional iviews) from Portal

I am having problem in printing the SAP Transactional I views (SAP Reports Output) from the Portal page. On selecting the Print Option under Menu from the SAP transactional iview page, it shows the list of the printers in the backend system. On selecting the printer configured in backend abap system and issuing a print command, it only creates a spool request in the backend system and nothing is sent to the printer itself.
I have also tried to use "PDF1" device type by creating a new output device and it does bring the contents of the report on a web embedded PDF page, hoever the characters are too small and to read and the ALV Report is no longer aligned. The line separating the rows and columns are not aligned.
Can anyone help in suggesting the best way to print contents of SAP Reports (created as Transactional i views) from the SAP Portal.
Thanks!

Hi Margie,
It is not necessary for a developer to have access to that area, and certainly not in a production system.
Ideally, there should be developer, test, QA and production systems, and the developer can have access to the developer system. The UI you are talking about gives access to all WD applications deployed to the AS Java, and the ability to run them as well as change some settings. But this is the domain of the administrator.
Hope this helps.
Daniel

Usage of Transaction IView in WPC

Hi Experts,
Can we use the Transaction IView in WPC(WEBPAGE COMPOSER 7.0) ?
Thanks in advance
Suresh

Hi Suresh,
I couldnt find out anywhere clearly specified regarding the usage of Transaction iViews in WPC, instead found out this:-
Not all iViews are suitable for Web pages. Note the following limitations:
■ Web Dynpro iViews are not supported.
■ When you add iViews to Web pages, you cannot set any parameters.
We therefore recommend that you gather permitted iViews in a folder in the Portal Content Directory (PCD) and provide an entry point for this folder in the Web content browser. Editors should only be able to navigate to this folder, not to all the folders in the PCD.
I Guess we can use Transaction Iviews.
Hope this helps,
Regards,
Shailesh

How to create R/3 Transaction Iviews in EP

Hi Experts,
I want to create R/3 Transaction Iview in EP.
So can any body guide me step by step procedure for it.
Regards,
DS

Hi DS,
To create a transaction iview u need to create a system object first.It contains the details of the system u want to connect to from portal.In your case u need to give the details of your R/3 system in the system object.
To create system object goto SYSTEM ADMIN>SYSTEM CONFIG>SYSTEM LANDSCAPE>PORTAL CONTENT>JUST RIGHT CLICK ON UR FOLDER (SYSTEM FROM TEMPLATE)just select that and from the available templates select -->SAP SYSTEM USIN DEDICATED APPLICATION SERVER.just give the name for the system object.
Now goto the properties of the system object select the property CONNECTOR
and fill in the following fields:
APPLICATION HOST:
GATEWAY HOST:
GATEWAY SERVICE:
REMOTE HOST:
SAP CLIENT:
SYS ID:
SERVER PORT:
SYS TYPE:
save them and now select the property USER MANAGEMENT and fill the fields
AUTHENTICATION TICKET TYPE:sap logon ticket
LOGON METHOD:UDPW
USER MAPPING TYPE:ADMIN,USER
To make the sys object being identified by the portal we declare alias name in display select SYSTEM ALIASES give alias name and save.
Now goto user admin select the user to map the portal user to the sys object.
select the property USER MAPPING FOR SYSTEM ACCESS.
In that u coula find the list of available system aliases select your alias and give user id password.
goto content admin>portal content>folder> new iview>sap transaction iview>sap gui for windows>select ur alias name and give the transaction code.
Regards,
Til;ak

Transaction iView opening in a separate window in SAP NW 7.3 portal

Hi Experts
I have created a transaction iView for LSO transaction.The iView is a SAP GUI for HTML type.When I am trying to open the iView from the portal , it opens in a separate tab instead of as a pop-up window.
The Launch in a New window property is set to Display in the portal content area.
If I try to edit the Launch in a window property and set it to Lock in target objects , it opens in the portal content area, but I want it to open in a complete new window as a pop-up.
I have attached screenshot of the expected result.
Please suggest.
Regards
Shaily

Newer versions of IE default to tabbed browsing, this is not a portal issue.

Transaction IView -- SAP GUI for Windows

Hi,
I have created a transaction iview -- sap gui for windows in my portal.
Even thought i logoff from my portal, sap gui session that is opened is not closed.
Can any one please suggest me a way to stop sap gui session also when i logoff from my portal.
Regards,
Nidhideep.

Very difficult. The SAPGUI window doesn't know anything about being launched by the portal.
You could try launching inside the portal content area.
Also, what is the problem with having the SAPGUI still open?
Cheers

Transaction iView - reload of content

Similar Messages

Maybe you are looking for